Road Dust Emission Sources and Assessment of Street Washing Effect

Although previous studies report on the effect of street washing on ambient particulate matter levels, there is a lack of studies investigating the results of street washing on the emission strength of road dust. A sampling campaign was conducted in Madrid urban area during July 2009 where road dust samples were collected in two sites, namely Reference site (where the road surface was not washed) and Pelayo site (where street washing was performed daily during night). Following the chemical characterization of the road dust particles the emission sources were resolved by means of Positive Matrix Factorization, PMF (Multilinear Engine scripting) and the mass contribution of each source was calculated for the two sites. Mineral dust, brake wear, tire wear, carbonaceous emissions and construction dust were the main sources of road dust with mineral and construction dust being the major contributors to inhalable road dust load. To evaluate the effectiveness of street washing on the emission sources, the sources mass contributions between the two sites were compared. Although brake wear and tire wear had lower concentrations at the site where street washing was performed, these mass differences were not statistically significant and the temporal variation did not show the expected build-up after dust removal. It was concluded that the washing activities resulted merely in a road dust moistening, without effective removal and that mobilization of particles took place in a few hours between washing and sampling. The results also indicated that it is worth paying attention to the dust dispersed from the construction sites as they affect the emission strength in nearby streets.

Efeitos dos agrotóxicos Kraft®36EC e Score®250EC (e seus princípios ativos) em ecossistemas aquáticos: análises comparativas e ecossistêmicas

Com o advento da agricultura ampliou-se a produção alimentar e os bens de consumo, no entanto, os riscos ambientais também foram maximizados em função da adoção de técnicas produtivas baseadas no uso intensivo de insumos agrícolas. Esta problemática é mundial, embora mais evidenciada nos países em desenvolvimento e que tem, na produção agrícola, a base de sua economia. O Brasil enquadra-se nesta situação e desde 2009 é considerado o maior consumidor de agrotóxicos do mundo, criando um cenário de risco ambiental e de saúde humana. Os efeitos ambientais, base deste estudo, estão relacionados não somente à perda de espécies não-alvo, uma vez que os agrotóxicos não são seletivos, mas também as alterações em nível ecossistêmico, a qual se relaciona com as perdas das funções e dos serviços gerados pelos sistemas naturais. Adiciona-se a esta complexidade, a forma de ação de cada agrotóxico, a distribuição dos mesmos nos diferentes compartimentos (ar, solo e água), o período de permanência de cada um, as relações sinérgicas decorrentes das interações entre diferentes produtos, a formação de subprodutos no processo de degradação, entre outros fatores, como as diferenças existentes entre o ingrediente ativo e a formulação comercial, na qual existem os chamados ingredientes inertes em sua composição, os quais podem ser muito mais tóxicos para espécies e ecossistemas. Considerando esta abordagem, a presente pesquisa foi desenvolvida com base na realidade de um local de referência, o município de Bom Repouso (MG/BR), no qual a intensificação da produção de morango e batata tem trazido uma série de riscos sociais e ambientais. Semelhante a outras regiões produtivas do país, o uso de agrotóxicos é recorrente, amplo e irrestrito, com destaque para as formulações comerciais Kraft®36EC e Score®250EC, as quais, juntamente com seus respectivos ingredientes ativos (abamectina e difenoconazol), foram avaliadas por meio de testes de toxicidade com espécies de diferentes níveis tróficos representativas de um ecossistema aquático, gerando informações que foram avaliadas em nível de espécie e de ecossistema, simulando o cenário de aplicação dos produtos no local de referência. Os resultados obtidos permitiram concluir sobre as diferenças de sensibilidade das espécies e quais seriam as mais indicadas para se avaliar os efeitos tóxicos de ambos os agrotóxicos; os efeitos diferenciados entre a formulação comercial e os ingredientes ativos; bem como as respostas em termos de espécies e de ecossistemas, demonstrando a necessidade de que ambas as análises sejam consideradas na avaliação de risco ecológico.

Caracterização de valores de referência de qualidade de sedimentos para compostos orgânicos no sistema estuarino da baixada santista, São Paulo

Em regiões altamente contaminadas como a região da Baixada Santista, é importante estabelecer metas para a recuperação do ambiente. Apesar da ausência da contaminação ser a meta ideal, as implicações e os custos associados a esse objetivo, demanda o estabelecimento de metas de recuperação realistas em relação aos contaminantes presentes na região. Com o objetivo de caracterizar valores de referência de qualidade de sedimentos para compostos orgânicos na região da Baixada Santista, o Canal de Bertioga foi escolhido como local de referência por ser uma região sem fontes industrais ou outras fontes pontuais relativas aos compostos analisados. Amostras de água, sedimento e ostras foram coletadas e os hidrocarbonetos policíclicos aromáticos (PAHs), bifenilos policlorados (PCBs) e pesticidas organoclorados (OCPs) foram determinados por técnicas cromatográficas. A avaliação dos resultados de análises de PAHs, permite afirmar com alguma segurança, que os valores da somatória de PAHs das amostras sedimentos são, na sua grande maioria, inferiores a 1.000 µg/kg, não superando 1.600 µg/kg, concentrações abaixo dos limites estabelecidos na Resolução CONAMA 344/04 e abaixo dos valores que possam causar algum efeito adverso à biota, conforme valores descritos na literatura. Resultados de análise de PCBs, OCPs, compostos fenólicos e compostos orgânicos voláteis (VOCs) em amostras de sedimento, indicaram concentrações destes compostos abaixo dos limites de quantificação, exceto DDE (5,30 g/kg) e HCB (2,34 g/kg), que foram detectados em apenas um ii sítio de amostragem. Não houve evidências de possíveis fontes de emissão próximas à região de referência para PCBs, OCPs, compostos fenólicos e VOCs. Finalizando, espera-se que os resultados obtidos neste estudo possam fornecer subsídios para futuramente estabelecer uma área de referência para qualidade de sedimento na região da Baixada Santista, ou ainda serem utilizados em conjunto com as avaliações de contaminantes inorgânicos, testes ecotoxicológicos e indicadores biológicos, como ferramenta para avaliação da qualidade de sedimento e/ou para a classificação de material a ser dragado na região da Baixada Santista.

Calcium carbonate, total and organic carbon and accumulation rate characteristics at DSDP Leg 78A Holes

Bulk sediment accumulation rates and carbonate and carbonate-free accumulation rates corrected for tectonic tilting have been calculated for Leg 78A sediments. These rates are uniformly low, ranging from 0.1 to 6.8 g/(cm**2 x 10**3 yr.), reflecting the pelagic-hemipelagic nature of all the sediments drilled in the northern Lesser Antilles forearc. Rates calculated for Sites 541 and 542 [0.6-6.8 g/(cm**2 x 10**3 yr.)], located on the lower slope of the accretionary prism, are significantly greater than the Neogene rates calculated for oceanic reference Site 543 [0.1-2.4 g/(cm**2 x 10**3)]. This difference could be the result of (1) tectonic thickening of accretionary prism sediments due to folding, small-scale faulting, and layer-parallel shortening; (2) deposition in shallower water farther above the CCD (carbonate compensation depth) resulting in preservation of a greater percentage of calcareous microfossils; or (3) a greater percentage of foraminiferal sediment gravity flows. Terrigenous turbidites are not documented in the Leg 78A area because of (1) great distance from South American sources; (2) damming effects of east-west trending tectonic elements; and (3) location on the Tiburon Rise (Site 543). This lack of terrigenous material, characteristic of intraoceanic convergent margins, suggests that published sedimentation models for active continental convergent margins with abundant terrigenous influxes are not applicable to intraoceanic convergent margin settings.

Total organic carbon, delta13C, biomarker, gas compilations and hopanoids analysis from IODP Sites 307-U1317 and 307-U1318

During the Integrated Ocean Drilling Program (IODP) Expedition 307 for the first time a cold-water coral carbonate mound was drilled down through its base into the underlying sediments. In the current study, sample material from within and below Challenger Mound, located in the Belgica carbonate mound province in the Porcupine Basin offshore Ireland, was investigated for its distribution of microbial communities and gas composition using biogeochemical and geochemical approaches to elucidate the question on the initiation of carbonate mounds. Past and living microbial populations are lower in the mound section compared to the underlying sediments or sediments of an upslope reference site. A reason for this might be a reduced substrate feedstock, reflected by low total organic carbon (TOC) contents, in the once coral dominated mound sequence. In contrast, in the reference site a lithostratigraphic sequence with comparatively high TOC contents shows higher abundances of both past and present microbial communities, indicating favourable living conditions from time of sedimentation until today. Composition and isotopic values of gases below the mound base seem to point to a mixed gas of biogenic and thermogenic origin with a higher proportion of biogenic gas. Oil-derived hydrocarbons were not detected at the mound site. This suggests that at least in the investigated part of the mound base the upward flow of fossil hydrocarbons, being one hypothesis for the initiation of the formation of carbonate mounds, seems to be only of minor significance.

Lithium isotopic composition of pore fluids and sediments in the Costa Rica subduction zone

Pore fluid and sediment Li concentrations and isotopic ratios provide important insights on the hydrology, sediment contribution to the arc volcanoes and fluid-sediment reactions at the dominantly non-accretionary Costa Rica subduction zone. Ocean Drilling Program Site 1039 in the trench axis provides a reference section of 400 m of the incoming sediments, and Site 1040, situated arcward from the trench, consists of a deformed sedimentary wedge and apron sediments, the décollement, and the partially dewatered underthrust sediment section. At the reference site, pore fluids show important isotopic variations (delta6Li=-21.7 to -37.8 per mil), reflecting the interplay of in situ alteration of volcanic material and ion exchange with clay minerals. In the basal section, a reversal of Li concentration and delta6Li toward seawater values is observed, providing supporting evidence for a lateral seawater flow system in the upper oceanic basement underlying this sediment section. At Site 1040, pore fluid of the lower deformed wedge sediments and within the décollement is enriched in Li and the isotopic compositions are relatively light, suggesting infiltration of a deep-seated fluid. The delta6Li value of -22 per mil of this Li-enriched fluid (261 µM), when compared with the delta6Li value of the subducted sediment section (-11 per mil), suggests that the deep source fluid originates from mineral fluid dehydration and transformation reactions at temperatures of 100 to 150°C, consistent with the temperature range of the up-dip seismogenic zone and of transformation of smectite to illite. The distribution of Li and its isotopes in the underthrust section are similar to those at the reference site, indicating near complete subduction of the incoming sediments and that early dewatering of the underthrust sediments occurs predominantly by lateral flow into the ocean. The hemipelagic clay-rich sediment section of the subducting plate carries most of the Li into this subduction zone, and the pelagic diatomaceous and nannofossil calcareous oozes contain little Li. The Li isotopes of both the clay-rich hemipelagic sediments and of the pelagic oozes are, however, similar, with delta6Li values of -9 to -12 per mil. The observations that (1) the delta6Li values of the underthrust sediments are distinctly lower than that of the mantle, and (2) the lavas of the Costa Rican volcanoes are enriched in Li and 7Li, provide an approximation of the contribution of the subducted sediments to the arc volcanoes. A first order mass balance calculation suggests that approximately half of the Li flux delivered by subducted sediments and altered oceanic crust into the Middle American Trench is recycled to the Costa Rican arc and at most a quarter of sedimentary Li is returned into the ocean through thrust faults, primarily the décollement thrust.

(Figure 1) Silicoflagellates at DSDP Hole 69-504

Diverse and abundant late Miocene to Pleistocene silicoflagellates at DSDP Site 504 can be correlated by tropical biostratigraphic zones and relative paleotemperature values to eastern tropical Pacific reference site DSDP 503A farther to the west. Early Pliocene assemblages, which were poorly known until now, are present and can be correlated locally between DSDP Holes 504, 503A, and 495, using species events associated with the new Dictyocha pulchella Subzone and Dictyocha angulata Subzone. Silicoflagellate relative paleotemperature values show major warming at 4.7 to 5.0 Ma (Cores 45-48), 3.4 to 3.8 Ma (Cores 32-33), 1.5 to 1.7 Ma (Cores 12-16), and 0.5 to 0.8 Ma (Cores 3-6). Major coolings occurred at 5.0 to 5.1 Ma (Core 51), 3.9 to 4.4 Ma (Cores 38-44), and 1.0 to 1.3 Ma (Cores 8-10). The appearance of Dictyocha longa is proposed to replace the asperoid/fibuloid ratio reversal as the bottom of the Dictyocha fibula Zone, because the non-evolutionary ratio reverses several times in the upper Miocene of Hole 503A, and at least once in Hole 504. Three new Pliocene silicoflagellates are defined: Dictyocha concinna Bukry, n. sp., D. helix Bukry, n. sp., and D. tamarae Bukry, n. sp.