Caracterização de argilas usadas para produção de cerâmica vermelha e estudo das alterações nas suas propriedades pela adição de resíduos

Neste trabalho são apresentados os resultados de caracterização das principais argilas usadas pela indústria cerâmica vermelha regional e, também, de alguns resíduos sólidos produzidos na região de Presidente Prudente - SP. Os resultados da incorporação destes resíduos em massas cerâmicas são avaliados através do estudo de suas propriedades tecnológicas. Para a caracterização dos materiais foram utilizadas as seguintes técnicas: análise textural (concentração das frações areia, silte e argila), difratometria de raios X e análise térmica. As propriedades tecnológicas de corpos de prova cerâmicos foram avaliadas através dos seguintes parâmetros: retração linear (RL), perda de massa ao fogo (PF), massa específica aparente (MEA), porosidade aparente (PA), absorção de água (AA) e resistência mecânica à flexão (RMF). Corpos de prova, com diferentes concentrações de resíduos, foram prensados (prensa uniaxial manual) e queimados em temperaturas que variaram de 800 a 1200 oC, usando um forno tipo mufla com controle de temperatura. As argilas sedimentares foram coletadas nas margens do rio Paraná e em áreas de várzea, próximas as cerâmicas. As amostras estudadas, coletadas nos depósitos das cerâmicas, são usadas para produção de tijolos maciços, blocos furados e telhas. Quatro tipos diferentes de resíduos foram estudados: (1) lodo de estação de tratamento de água ETA, (2) torta de filtro de indústria de re-refino de óleo lubrificante, (3) pó de vidro (soda-cal) de garrafa tipo long neck descartável, e (4) cinza de bagaço de cana. Estes resíduos foram incorporados em massas cerâmicas coletadas nas indústrias... (Resumo completo, clicar acesso eletrônico abaixo)

Caracterização e utilização do resíduo de cerâmica vermelha como material pozolânico em matrizes cimentantes

Pós-graduação em Engenharia Civil - FEIS

Sedimentology and geochemistry of the sand fraction in surface sediments off West Africa

Surface sediments from 5 profiles between 30 and 3000 m water depth off W Africa (12-19° N) have been studied for their sand fraction composition and their total calcium carbonate and organic matter contents to evaluate the effect of climatic and hydrographic factors on actual sedimentation. On the shelf and upper slope (< 500 m), currents prevent the deposition of significant amounts of fine-grained material. The sediments forming here are characterized by high sand contents (> 60 %; in most samples > 89 %), low organic carbon contents (in most samples < 0.8 %), high median diameters of the sand fraction (120-500 µm), and by a predominance of quartz and biogenic relict shells (most abundant: molluscs and bryozoans) in the sand fraction. Median diameters of total sand fraction and of major biogenic sand fraction components (biogenic relict material, benthonic molluscs, benthonic and planktonic foraminifers) co-vary to some extent and show maximum values in 100-300 m water depth, reflectingthe sorting effect of currents (perhaps the northward flowing undercurrent). In this water depth, biogenic relict material is considerably enriched relative to wuartz, the second dominating sand fraction component on the shelf and upper slope, resulting in distinct calcium carbonate maxima of the bulk sediments. The influence of the undercurrent is also reflected in a northward transport of fine grained river load and perhaps in the distribution of the red stained, coarse silt and sand-size clay aggregates, which show maxima in 300-500 m water depth. They probably originate from tropical soils. Abundant coarse red-stained quartz on the shelf off Cape Roxo (12-130° N) suggests a southward extension of last glacial dune fields to this latitude. Below about 500 m water depth, current influence becomes negligible - as indicated by a strong decrease in sand content, a concomitant increase in sedimentary organic carbon contents (up to 2.5-3.5 %), and the occurence of high mica/quartz ratios in the sand fraction. Downslope transport, presumably due to the bioturbation mechanism, is indicated by the presence of coarse shelf-borne particles (glauconite, relict shells) down to about 1000 m water depth. The fine/coarse ratio (clay + silt/sand) of the sediments from water deoth > 500 m never exceed a value of 11 in northern latitudes (19° - 26° N), but shows distinct maxima, ranging from 50 to 120, at latitudes 18°, 17° 15°30', and 14° N in about 2000 m water depth. This distribution is attributed to the deposition of fine-grained river load at the continental slope between 18° and 14° N, brought into the sea by the Senegal and souther rivers and transported northward ny the undercurrent. Strong calcium carbonate dissolution is indicated by the complete disappearance of pteropodes (aragonite) and high fragmentation of the planktoic foraminifers (calcite) in sediments from water depth > 300-600 m. Fragmentation ratios of planktonic foraminifers were found to depend on the organic carbon/carbonate ratios of the sediment suggesting that calcite dissolution at the sea bottom may also be significant in shelf and continental slope water depths if the organic matter/carbonate ratio of the surface sediment is high and the test remain long enough within the oxidizing layer on the top of the sulfate reduction zone. The fact that in the region under study intensity and anual duration of upwelling decrease from north to south is neither reflected in the composition on the sand fraction (i.e. radiolarian and fish debris contents, radiolarian/planktonic foraminiferal ratios, benthos/plankton ratios of foraminifers), nor in the sedimentary organic carbon distribution. On the contrary, these parameters even show in comparable water depths a tendency for highest values in the south, partly because primary production rates remain high in the whole region, particularly on the shelf, due to the nutrient input by rivers in the south. In addition, several hydrographic, sedimentological and climatic factors severely affect their distribution - for example currents, dissolution, grain size composition, deposition of river load, and bulk sedimentation rats.

Sola romani: morteros hidráulicos romanos en la Península Ibérica

En esta investigación se han analizado morteros de cal de cronología romana en el interior de la Península Ibérica. Para ello, se seleccionó una serie de muestras procedentes de diversos yacimientos, y de estructuras de carácter industrial. Estas muestras presentan aditivos cerámicos y conglomerantes de cal, como característica principal. Desde un principio el esfuerzo debía de centrarse en los fragmentos cerámicos presentes en los morteros. Para ello se documentaron varios morteros con aditivos cerámicos, a fin de conocer sus características básicas (componentes, distribución, micro-estratigrafía, granulometría, etc.). Por ello, y una vez tomadas las muestras, ésta fueron tratadas y procesadas para desarrollar una primera fase de estudio por medio de macroscopía. Se obtuvieron buenos resultados en cuanto a la caracterización visual de los morteros, localizando y documentando los fragmentos cerámicos. Durante la observación de dichos aditivos se observó que los fragmentos cerámicos tenían unas coronas o anillos de coloración que recorrían el borde, justo al contacto con la matriz de cal. Fueron seleccionados algunos fragmentos en los que eran más visibles dichos anillos. A fin de conocer la posible relación entre algunos yacimientos cercanos y la presencia de dicho anillo cromáticos se desarrolló una microscopía óptica polarizada, realizando láminas delgadas de las muestras y sobre los fragmentos cerámicos más determinantes, en concreto de una serie de enclaves del valle del Henares. Además de caracterizar microscópicamente los morteros, se observó que los anillos no eran un defecto visual ni una alteración física, producida tal vez por la extracción, la fase del corte o por la cocción de la cerámica. Tras analizar varios ejemplares se pudo apreciar que esos anillos eran habituales en todas las muestras y que se presentaban de diferente manera, es decir, que se observaban en granos cerámicos de diferentes características físicas (cochura, tamaño, situación con respecto del conglomerante, etc.). A fin de conocer los aspectos químicos de dicha alteración se seleccionó un grupo de muestras en las que los resultados macroscópicos habían sido muy claros, y en las que la microscopía óptica polarizada había determinado en los bordes, áreas adecuadas para otros análisis. Se realizó un mapeado o mapping de elementos químicos, a fin de saber qué podía estar sucediendo en esa interfaz entre el fragmento cerámico y la matriz de cal. Gracias a los resultados obtenidos se comprobó que existía una acumulación potencial de calcio tanto en el interior de los granos cerámicos como en el exterior, justo en la zona de contacto con el conglomerante, formando manchas que recorrían longitudinalmente el borde. Estos datos fueron muy útiles para llevar a cabo la siguiente fase de estudio, que permitiría conocer puntualmente qué estaba sucediendo químicamente en esa zona de contacto. Finalmente y con el objetivo de describir química y puntualmente este efecto en las adiciones cerámicas, se volvió a seleccionar una serie de muestras, escogidas esta vez en función de los granos cerámicos que cumpliesen unas variables estadísticas. Se eligieron granos con distintos tipos de cocciones, así como granos con tamaños diversos y granos con aditivo ceniciento en la matriz de cal, pensando que podrían ser las variables más útiles de interpretar de existir algún tipo de cambio químico entre la arcilla cocida y la matriz de cal. Tales variables se adaptaron a un sistema estadístico multi-varial y geométrico, con el objetivo de sintetizar los resultados y visualizar de forma óptima los datos en conjunto, como se ha comentado en varias ocasiones en este trabajo. Una vez seleccionados los granos por variables se procedió a realizar un análisis lineal y espectral semi-cuantitativo de SEM-EDX, con el que se caracterizaba químicamente una sección lineal del grano, desde la matriz de arcilla cocida de la cerámica hasta la matriz de cal –del interior al exterior del grano- pasando por el centro de la banda de reacción. Este análisis permitió determinar que se había producido una serie de cambios químicos porcentuales en los granos de cerámica. Dichos cambios se resumen en un incremento global de los porcentajes de calcio en el interior de las bandas de reacción de la cerámica, desde el borde mismo del anillo hasta el exterior. Así también se observaron picos porcentuales en el interfaz del fragmento cerámico con la matriz de cal, lo que confirmaba los resultados obtenidos por medio del mapping. Globalmente en todas las muestras se apreció un hombro en las gráficas de calcio a su paso por la zona de afección del anillo de reacción. Los restantes porcentajes de magnesio, silicio y aluminio se mantienen normales. En esta tesis se ha confirmado que dicho incremento global de calcio se acentúa en las muestras en donde no hay cenizas en la matriz de cal. Los casos correspondientes a estos granos sufren un incremento mayor que en el resto. La segunda variable que sufre un mayor incremento de calcio es la que corresponde a granos con buena cocción de la arcilla. Por lo tanto, parece que la tercera variable, la que corresponde con el tamaño del fragmento cerámico, no es decisiva. Por lo tanto, teniendo en cuenta la prueba visual de los anillos de reacción, y atendiendo a los resultados químicos, podríamos pensar que ese incremento de calcio en la banda de reacción de los fragmentos cerámicos se debió a una absorción de calcio en el interior de la arcilla cocida en la fase inmediatamente previa al fraguado, incluso durante el apagado de la cal. Es en este punto donde estaría la clave del cambio químico que se produce en esta interfaz, el calcio sílice-aluminato del que algunos autores ya han investigado. Esta absorción de calcio en el interior del grano no vendría sola, sino que generaría una costra de cal en el interfaz exterior de la cerámica, la cual ha sido observada químicamente por mapping y mineralógicamente por medio de microscopía óptica de polarización. La consecuencia de estos resultados es, primero, la mejora de nuestro conocimiento general acerca del factor hidráulico en los morteros. Asimismo se aprecia que la incorporación de materiales orgánicos como cenizas, puede alterar los porcentajes de calcio en el interior de los aditivos cerámicos, por lo que habría que sopesar, en trabajos futuros, si este tipo de material es adecuado o no en las mezclas destinadas a la restauración, así como seguir indagando en las propiedades de los morteros con la incorporación de aditivos orgánicos. Desde el punto de vista de la catalogación de los suelos industriales hidráulicos de época romana, además de mejorar la documentación incorporando micro-estratigrafías y granulometrías, la investigación de este material histórico constructivo mejora en cuanto a que se incorporan ensayos sencillos, que facilitan incluso la peritación de un estado de conservación por medio de una lupa binocular. Arqueológicamente hablando, es muy interesante correlacionar fábricas diferentes de estructuras situadas o bien en un mismo yacimiento, o bien en una misma área regional. Los estudios de caracterización y micro-estratigrafía no sólo aportan datos nuevos de cara a la restauración de morteros, sino que crean la posibilidad de generar patrones constructivos que sirvan de fósiles-guía para datar relativamente a unas estructuras o a otras. En lo referido a los resultados obtenidos en los diferentes complejos arqueológicos se ha observado una diferencia entre los morteros destinados a piletas y cubetas con respecto a los suelos industriales de uso indeterminado. La muestra correspondiente al yacimiento de Las Arenas no dispone de ninguna micro-estratigrafía, como sí por el contrario en las muestras obtenidas en Rotonda de Mejorada, Val de la Viña y La Magdalena. En estos enclaves las estructuras presentan grandes similitudes, con diferentes niveles constructivos empleando morteros de cal con áridos y gravas en las capas interiores, y áridos con adiciones cerámicas en las exteriores. En lo relativo a la granulometría las adiciones cerámicas de las muestras de Val de la Viña y La Magdalena presentan varias coincidencias en cuanto al tamaño de los granos y la distribución. Asimismo, de las muestras tomadas en La Magdalena, existe una gran diferencia entre las muestras MG1, MG2, MG3 y MG4 con respecto a las muestras MG5 y MG6, correspondientes éstas últimas a un mortero con fragmentos cerámicos de gran tamaño. Las estructuras EMG1 y EMG2, correspondientes a una cubeta y una pileta de La Magdalena, guardan similitud en lo referido a la micro-estratigrafía y a la granulometría. Se ha determinado que su función, así como su fabricación, debieron estar vinculadas a un mismo contexto cronocultural. Química y mineralógicamente, las muestras presentan características iguales, con presencia de un conglomerante de cal con áridos y aditivos cerámicos de diferentes cochuras. Destaca la muestra de Las Arenas, con un tamaño de los fragmentos cerámicos muy superior al resto, seguido de la estructura EMG3 de La Magdalena. Las muestras restantes de éste enclave, junto con las muestras recogidas en Val de la Viña y Rotonda de Mejorada presentan condiciones similares. En conclusión, los datos revelan que existían diferentes fábricas destinadas a distintas finalidades, y que las estructuras industriales empleaban aditivos cerámicos para la manipulación de productos con líquidos, de distintas densidades pero que requerían de cierto grado de hidraulicidad. ABSTRACT Lime Roman mortars from the Iberian Peninsula has been analyzed in this reesearch. A group of samples were selected from some sites and all the samples come from industrial structures. All this samples show ceramic additives. From the start, the effort was centered in the pieces of pottery that were found in the mortars. The samples were treated and processed to develop a first phase of the research using macroscopy. With this technique, great results were achieved in the characterization of mortars, the microstratigraphy and the location of the ceramic pieces. While observing these pieces, it was seen that the fragments of pottery had a ring bordering the piece. The pieces with the bigger and more vivid rings were chosen and they were analyzed by a polarized light microscope. The mortars were characterized microscopically and it also showed that the rings were not a physical alteration or a visual defect. After some more tests, the rings were a chemical change associated with the hydraulicity of the mortar. The best samples were selected and mappings of their chemical elements were performed in order to know what could be happening in the interface between the ceramic matrix fragment and lime. With the results obtained it was found that there was a potential; both calcium accumulation within the ceramic grains and outside, just in the area of contact with the binder, forming spots longitudinally along the edge. These data were very useful for carrying out the next phase of study, which would meet promptly what was happening chemically in the area of contact. Another group of samples were taken, and this time focused on ceramic grains that met a statistical variables. Grains were chosen with two types of cooking as well as grains with different sizes and grains with ash additive in the matrix of lime, thinking that might be the most logical to be some sort of chemical change between the baked clay and lime array variables . Such variables were adapted to a multi-varial and geometric statistical system in order to synthesize the results and optimally display the data together, as mentioned several times in this work. After selecting the variables grains proceeded to perform a linear and spectral analysis SEM-EDX. This analysis led to determine that the chemical changes were graduals. These changes are summarized in an increase in the percentages of calcium inside the reaction rim of ceramics, from the edge to the outer ring. So percentage increasing is also observed at the interface of the ceramic matrix fragment with lime, confirming the results obtained by the mapping. Overall in all samples can be seen a shoulder in graphic calcium through the area of the ring reaction condition. The remaining percentages of magnesium, silicon and aluminum are usual. We have promptly confirmed that the increase of calcium is accentuated in samples where there is no ash and lime matrix. Cases for these grains suffer a greater increase than the rest. The second variable suffering more calcium is increased corresponding to good cooking grains with clay. Therefore, it appears that the variable size of the fragment is not critical. Therefore, considering the visual tests to the rings and their response to chemical results, we might think that increasing calcium inside the ceramic fragments was due to an injection of calcium inside clay in the run-up to the setting phase. It is at this point that would be the key to the chemical change that occurs at this interface, silica-calcium aluminate some authors have already investigated. This injection of calcium into the grain does not come alone, but generate a lime crust on the outside interface of ceramics, which we tested for mapping is real in our samples. The consequence of these results is the improvement of our understanding of historical hydraulic factor in building materials, such as mortar. For example, knowing that the incorporation of organic materials such as ash powder, may be detrimental to the injection of calcium inside the ceramic additives. Archaeologically speaking, it's very interesting to correlate different factories or structures located on a single site, or in the same regional area. Characterization studies and microstratigraphy not only provide new information to help restore mortars, but create the possibility of generating constructive patterns that serve as guide fossils to determinate the age of the structures. With regard to the results obtained in different archaeological sites it has seen a difference between mortars of pools or sinks with respect to industrial floors of undetermined use. The sample of the site of Las Arenas does not have any micro-stratigraphy, as if instead in the samples obtained in Rotonda de Mejorada, Val de la Viña and La Magdalena sites. In these settlements the structures are really similar, with different construction levels using lime mortars with aggregates and gravel in the inner layers, and ceramic aggregates as external additions. With regard to the grain size of the ceramic additions Val de la Viña and La Magdalena samples has several coincidences about the size of grains and distribution. Also, samples taken at La Magdalena, there is a difference between the MG1, MG2, MG3 and MG4 samples and the MG5 and MG6 samples, so the last corresponding to a mortar samples with larger ceramic fragments. The EMG1 and EMG2 structures, corresponding to a bucket and a pool of La Magdalena settlement, have similarities with regard to micro-stratigraphy and grain size. It has been determined that the function and manufacturing must be linked with a same chronocultural context.

Incorporação do resíduo de cascalho de perfuração de poços de petróleo em formulações cerâmicas

During its operations, the oil industry generates a lot of waste, including gravel from drilling. Control of environmental impacts caused by this waste represents a major challenge. Such impacts can be minimized when it is given an appropriate management by being properly treated and properly disposed or recycled. The properties of these materials can be greatly influenced when a waste is added to its composition. This work aims to study the incorporation of gravel waste oil-well drilling in the standard body for production of red ceramic from a ceramic industry in São Gonçalo do Amarante / RN. The success of the incorporation can minimize costs in the production of ceramic pieces and reduce the environmental impacts caused by waste. The raw materials used were collected, characterized, and formulated with the percentages of 0%, 20% and 40% by weight of substitution of residue were synthesized at temperatures of 900, 1.010 and 1.120 °C using 30 minute firing intervals, 1 hour and 30min and 2 hours and 30 minutes, based on a factorial design 2³. Samples were then subjected to the tests of Water Absorption, Linear Retraction Firing, Flexural Rupture Strength, Apparent Porosity and Apparent Specific mass and Scanning Electron Microscopy (SEM) of break section. The results showed that the use of the residue for the manufacture of the ceramic products is possible (tiles, bricks and massive hollow bricks) replacing the clay to 40%, meeting the requirements of the standard and the literature for the technological properties of the final product.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Desempenho térmico de coberturas: Um estudo comparativo entre as telhas de material reciclado, de fibra e betume, fibrocimento e cerâmica

This study aims to compare the thermal performance of tiles made from recycled material (waste packaging cardboard with aluminized film) with the tiles of fiber and bitumen, fiber cement and red ceramic with the aim of verifying the suitability of tile to be used in hot and humid climate of low latitude. The samples were selected according to the availability from Natal - RN market, as they are sold to the consumers. The methodology was based on studies that used experimental apparatus composed of thermal chambers heated by banks of incandescent bulbs, to analyze the thermal performance of materials. The tiles in the study were submitted to analysis of thermal performance, thermophysical properties and absorptance, using chambers of thermal performance, measuring the thermophysical properties and portable spectrometer, respectively. Comparative analysis of thermal performance between two samples of the recycled material with dimple sizes and different amounts of aluminum were made, in order to verify, if these characteristics had some interference on the thermal performance of them; the results showed no significant performance differences between the samples. The data obtained in chambers of thermal performance and confirmed by statistical analysis, showed, that the tile of recycled material have similar thermal performance to the tile of fiber cement. In addition to these tests was carried out the automatic monitoring of a building covered with tiles of recycled material, to verify its thermal performance in a real situation. The results showed that recycled shingles must be used with technical criteria similar to those used for fiber cement tiles, with regard to the heat gain into the building. Within these criteria should be taken into account local characteristics, especially in regions with hot and humid climate, and its use must be associated, according to the literature, to elements of thermal insulation and use of passive techniques such as vented attics, ceilings and right foot higher

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Avaliação da conformidade de blocos cerâmicos para alvenaria de vedação produzidas na Região Integrada de Desenvolvimento da Grande Teresina

This research presents an outlook of the industries of red ceramic in the region next to the city of Teresina and an analysis of the ceramic products producted in this pole. The microregion investigated possesses 13 boroughs where were identified 32 ceramic in operation, being that 24 are located in Teresina, the ceramic region more important of Piauí, 1 is located in the city of Miguel Leão and 7 is located in Timon city that belongs to the state of Maranhão. The majority of ceramics are pulverized in these two cities, Teresina and Timon , responsible by a largely production independent of distance between fabric and consumer market. Furthermore, there is an artisanal production realized in other boroughs, mainly manual conformation bricks, where are producted diverse types of handicraft and ceramics utilitarian. The objective of this research is to evalue the conformity of ceramic blocks for brick of obstruction made by red ceramic industry of microregion at studying, verifying their pontentialities and adequacy in terms of production. In this research universe made a search of ceramic industries related to the Foundation CEPRO (Foundation Center of Research Social and Economic of Piauí). For the analysis of the ceramic products , were colected 60 crude bricks sample in three industries for their characterization, and 39 burned bricks sample for the Evaluation of Conformity. The results of the characterization made reached a accetptable standard in all formulations and temperature studied. The burned samples were applied to the geometric, physical and mechanical assays according to the ABNT standards (Brazilian Association of Technical Standards). The results of the physical assays showed that all the samples are at the same band recommended by standard. However, through the geometric assays just two industries did not present results according to the standard, due to lack of control in their process such as in their equipments. Taking into account the mechanical properties, only one industry investigated was not according to the standard

Influência do lodo de ETE na massa para fabricação de cerâmica vermelha

The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pollution resulting from inappropriate management of residues. Thus, is necessary achieve a new equilibrium between the grow from raw materials and energy and the residue generation. This equilibrium should be achieved by technical and economic feasibility of environmental supported models through recycling and reuse. The red ceramic industry stand out in residue absorption question as raw material due their clay mass heterogeneity, constituted by clay minerals and non-clay minerals with wide mineralogical variation, allowing residue inclusion which act like plastic or non-plastic materials, contributing to retain heavy metals contained in residues in the vitreous mass formed during the burning of the ceramic bodies. This work propose the study of the influence of incorporation of 25 wt.% sludge from wastewater treatment plant, according preliminary results, in the mass to produce ceramic bodies. The raw materials was characterized through chemical composition analyses by XRF, mineralogical analyses by XRD, thermal analyses by TG and DTA, Atterberg limits and thermodilatometry. Subsequently was composed the mass with 75 wt.% of clay and 25 wt.% of dried wastewater sludge from UFRN WWTP. Samples with 6,0 x 2,0 x 0,5 cm was produced with unidirectional compacting under pressure of 20MPa and burned in temperatures between 950 and 1,200ºC. After fired, the ceramic bodies have been submitted to physical and mechanical analyses through the measure of firing shrinkage, water absorption, density, apparent porosity and flexural strength; crystallographic analyses through XRD and microstructure analyses by SEM. The technological properties obtained was satisfactory to production of roof tiles with 25 wt.% at 1,200 ºC, but the production of others products at lower temperatures was not feasible

Influência da gipsita no surgimento de eflorescência em telhas cerâmicas

The red ceramic industry is recognized as of major importance in Piauí State. The State capital, Teresina, is the greatest producer of this material ( production about 18 million peaces), which is used mainly for masonry sealing blocks. One of the most frequent problems in this kind of products is the efflorescence. This work has the main objective of studying the influence of gypsum addition on non-glazed tiles, by using the local industry production standards. The raw materials were characterized by FRX, DRX, TGA, DTA and AD. Extruded test specimens were made with the addition of 1, 3 and 5% of gypsum in the ceramic paste, burned at 850oC, 950oC and 1050oC and submitted to further technological tests and microestrutural analysis by the scanning electron microscope. In order to accelerate the aging of bodies of evidence, they were immersed in successive water baths and posterior drying. The reference ceramic paste showed tendency to efflorescence formation after drying and consolidated efflorescence after burning, but no affecting the technological results

Avaliação da potencialidade dos resíduos de gesso de revestimento incorporados em formulações de massas cerâmicas

In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ºC, 950 °C and 1050 °C, the heating rate of 5 ºC / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ºC and 950 ºC, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated

Efeito da adição de carbonatos em formulação de massa para revestimento cerâmico utilizando matérias-primas do Piauí

Piauí state is a major producer of traditional red ceramic burning as bricks, tiles and ceramic tiles, with its main production center located in the city of Teresina. The state has large reserves of raw materials that can be used in the ceramic coating as clays, quartz, talc and carbonates. However, in the preparation of ceramic bodies using only a mixture of clays with different characteristics. The study aims to evaluate the effect of adding two types of carbonates in the ceramic semiporous mass coating produced in Piauí and then to verify the potential use of these carbonates as supplementary raw material product manufactured or the feasibility of obtaining a ceramic plate that meets the specifications for the porous coating. For this, were characterized the ceramic Piauí coating mass, a calcitic carbonate and a dolomitic, were made in the levels of 2, 4, 8, 16, and 32%. The masses were formed by pressing and burneds in two environments: a laboratory furnace (1080°C, 1120°C, 1140°C, and 1160°C) and an industrial furnace (1140°C). Then, following tests of linear shrinkage water absorption, apparent porosity, bulk density and flexural strength. Furthermore, the fired specimens were tested for their macrostructure and microstructure. The results showed the possibility of using the carbonate in ceramic mass flooring produced in Piauí, as added in small proportions improved dimensional stability and increased mechanical strength of ceramics pieces. It also proved itself possible to produce porous coating when added in higher levels

Desempenho térmico de coberturas: Um estudo comparativo entre as telhas de material reciclado, de fibra e betume, fibrocimento e cerâmica

This study aims to compare the thermal performance of tiles made from recycled material (waste packaging cardboard with aluminized film) with the tiles of fiber and bitumen, fiber cement and red ceramic with the aim of verifying the suitability of tile to be used in hot and humid climate of low latitude. The samples were selected according to the availability from Natal - RN market, as they are sold to the consumers. The methodology was based on studies that used experimental apparatus composed of thermal chambers heated by banks of incandescent bulbs, to analyze the thermal performance of materials. The tiles in the study were submitted to analysis of thermal performance, thermophysical properties and absorptance, using chambers of thermal performance, measuring the thermophysical properties and portable spectrometer, respectively. Comparative analysis of thermal performance between two samples of the recycled material with dimple sizes and different amounts of aluminum were made, in order to verify, if these characteristics had some interference on the thermal performance of them; the results showed no significant performance differences between the samples. The data obtained in chambers of thermal performance and confirmed by statistical analysis, showed, that the tile of recycled material have similar thermal performance to the tile of fiber cement. In addition to these tests was carried out the automatic monitoring of a building covered with tiles of recycled material, to verify its thermal performance in a real situation. The results showed that recycled shingles must be used with technical criteria similar to those used for fiber cement tiles, with regard to the heat gain into the building. Within these criteria should be taken into account local characteristics, especially in regions with hot and humid climate, and its use must be associated, according to the literature, to elements of thermal insulation and use of passive techniques such as vented attics, ceilings and right foot higher