Microwave absorption and emission from magnetized afterglow plasmas

The microwave scattering properties of an axially magnetized afterglow plasma column in an S-band waveguide have been investigated experimentally. The column axis is perpendicular to the electric field and the direction of wave propagation in the H_(10)-mode waveguide. Strong absorption is found in the range of upper hybrid frequencies, ω_c ≤ ω ≤ [ω^2_c + ω^2_p(r,t)]^(1/2) where ω_c is the electron cyclotron frequency and ω_p is the locally and temporally varying electron plasma frequency. With the high absorption the noise emission approaches the blackbody limit. A microwave radiometer has been used to measure the noise power and with a comparison and null-technique the electron temperature. As emission and absorption are largely confined to a resonant layer, spatially resolved temperature data are obtained. Time resolution is obtained by gating the radiometer. The peak electron density is derived from the emission or absorption onset at the maximum upper hybrid frequency and confirmed by independent measurements. With this diagnostic technique the electron density and temperature decay has been studied under a variety of experimental conditions. Ambipolar diffusion and collisional cooling essentially account for the plasma decay, but impurities and metastable ions play an important role. The diagnostic method is successfully applied in a microwave heating experiment. The existence of absorbing resonant layers is shown by a peak in the radial temperature profile where the local upper hybrid frequency equals the heating frequency. The knowledge of the plasma parameters is important in the study of hot plasma effects. Buchsbaum-Hasegawa modes are investigated in a wide range of magnetic fields (.5 < ω_c/ω < .985).

Storm track response to perturbations in climate

This thesis advances our understanding of midlatitude storm tracks and how they respond to perturbations in the climate system. The midlatitude storm tracks are regions of maximal turbulent kinetic energy in the atmosphere. Through them, the bulk of the atmospheric transport of energy, water vapor, and angular momentum occurs in midlatitudes. Therefore, they are important regulators of climate, controlling basic features such as the distribution of surface temperatures, precipitation, and winds in midlatitudes. Storm tracks are robustly projected to shift poleward in global-warming simulations with current climate models. Yet the reasons for this shift have remained unclear. Here we show that this shift occurs even in extremely idealized (but still three-dimensional) simulations of dry atmospheres. We use these simulations to develop an understanding of the processes responsible for the shift and develop a conceptual model that accounts for it.

We demonstrate that changes in the convective static stability in the deep tropics alone can drive remote shifts in the midlatitude storm tracks. Through simulations with a dry idealized general circulation model (GCM), midlatitude storm tracks are shown to be located where the mean available potential energy (MAPE, a measure of the potential energy available to be converted into kinetic energy) is maximal. As the climate varies, even if only driven by tropical static stability changes, the MAPE maximum shifts primarily because of shifts of the maximum of near-surface meridional temperature gradients. The temperature gradients shift in response to changes in the width of the tropical Hadley circulation, whose width is affected by the tropical static stability. Storm tracks generally shift in tandem with shifts of the subtropical terminus of the Hadley circulation.

We develop a one-dimensional diffusive energy-balance model that links changes in the Hadley circulation to midlatitude temperature gradients and so to the storm tracks. It is the first conceptual model to incorporate a dynamical coupling between the tropical Hadley circulation and midlatitude turbulent energy transport. Numerical and analytical solutions of the model elucidate the circumstances of when and how the storm tracks shift in tandem with the terminus of the Hadley circulation. They illustrate how an increase of only the convective static stability in the deep tropics can lead to an expansion of the Hadley circulation and a poleward shift of storm tracks.

The simulations with the idealized GCM and the conceptual energy-balance model demonstrate a clear link between Hadley circulation dynamics and midlatitude storm track position. With the help of the hierarchy of models presented in this thesis, we obtain a closed theory of storm track shifts in dry climates. The relevance of this theory for more realistic moist climates is discussed.

Study of Al2O3/MgF2 HR coatings at 355 nm

With the present work we tried to study the effective methods to improve the laser-induced damage threshold (LIDT) and reflectance of HR coatings at 355 nm. The work presented in this paper wits part of an ongoing study about vacuum annealing. It was dedicated to study the effects Of Vacuum annealing with different temperature gradients on the structure, optical properties and laser-induced damage threshold (LIDT) of 355nm Al2O3/MgF2HR coatings. A number of samples were prepared by electron beam evaporation using the same deposition process with an optimal deposition temperature of 280 degrees C. After deposition, samples were annealed in the coating chamber for 3 h with different temperature gradients. Morphologies of the samples were observed by Leica-DMRXE. Microscope, Structure of the samples had been characterized by X-ray diffraction (XRD). Transmittance and reflectance of the samples were measured by Lambda 900 Spectrometer, The LIDT of the samples was measured by a 355 nm Nd:YAG laser with a pulse width of 8 ns. It was found that the temperature gradient of vacuum annealing had significant effects on the morphology, structure, absorption, and LIDT of the samples, (c) 2005 Elsevier Ltd. All rights reserved.

Horizontal and vertical movements of juvenile bluefin tuna (Thunnus thynnus) in relation to oceanographic conditions of the western North Atlantic, determined with ultrasonic telemetry

We employed ultrasonic transmitters to follow (for up to 48 h) the horizontal and vertical movements of five juvenile (6.8–18.7 kg estimated body mass) bluefin tuna (Thunnus thynnus) in the western North Atlantic (off the eastern shore of Virginia). Our objective was to document the fishes’ behavior and distribution in relation to oceanographic conditions and thus begin to address issues that currently limit population assessments based on aerial surveys. Estimation of the trends in adult and juvenile Atlantic bluefin tuna abundance by aerial surveys, and other fishery-independent measures, is considered a priority. Juvenile bluefin tuna spent the majority of their time over the continental shelf in relatively shallow water (generally less then 40 m deep). Fish used the entire water column in spite of relatively steep vertical thermal gradients (≈24°C at the surface and ≈12°C at 40 m depth), but spent the majority of their time (≈90%) above 15 m and in water warmer then 20°C. Mean swimming speeds ranged from 2.8 to 3.3 knots, and total distance covered from 152 to 289 km (82–156 nmi). Because fish generally remained within relatively con-fined areas, net displacement was only 7.7–52.7 km (4.1–28.4 nmi). Horizontal movements were not correlated with sea surface temperature. We propose that it is unlikely that juvenile bluefin tuna in this area can detect minor horizontal temperature gradients (generally less then 0.5°C/km) because of the steep vertical temperature gradients (up to ≈0.6°C/m) they experience during their regular vertical movements. In contrast, water clarity did appear to influence behavior because the fish remained in the intermediate water mass between the turbid and phytoplankton-rich plume exiting Chesapeake Bay (and similar coastal waters) and the clear oligotrophic water east of the continental shelf.

内蒙古草原温度梯度上3个典型群落的能量平衡研究

通量测量点的能量收支总是表现出不平衡，即使在地势平坦、植被分布均一、稀疏植被下垫面的情况下也有约30%的能量失衡状况。能量平衡闭合 (EBC) 问题在验证涡度相关系统质量方面，得到了广泛的关注。实验在内蒙古草原3个地点，通过涡度相关系统附近移动能量平衡系统的测定手段，采用能量平衡余项法和最小二乘 (OLS) 线性回归法，研究了土壤热通量、净辐射及可供能量空间变异对能量平衡闭合的影响。 结果显示，EBC 在三个研究点的平均余项为8~19 W m-2，OLS 斜率为0.83~0.96。EBC 在土壤湿润情况的站点要高于干旱站点。 土壤热通量的空间变异三站点平均为白天48 W m-2 (占同时间 Rn 的13%)，夜间15 W m-2 (34%)，平均29 W m-2 (24%)。通过8个工作站的测量，这个变异会造成9% (从0.93到1.01) 的 OLS 斜率差别。夜间的能量平衡不闭合可以由土壤热通量的空间变异解释。如果在本研究的的三个草原站点上忽略了土壤热通量，则会造成较大的余项 (峰值时110 W m-2) 产生，从而使 OLS 斜率增大23%。特别是通量板埋置在地面以下30 mm处时，上层的土壤热储部分占到全部土壤热通量的50%，这不仅影响到 EBC 的大小，更起到调节土壤热通量与“真实的波形” 相一致的作用。如果该部分热储被忽略掉，EBC 余项会增加60 W m-2，OLS 斜率也会变化 (减少) 9%。用大尺度多点测量与涡度塔附近的小尺度测定相比较，后者表现出稍高的闭合率，即 OLS 斜率增加4%。 相对于土壤热通量，净辐射的空间变异较小，三站点平均为白天17 W m-2 (5%)，夜间7 W m-2 (13%)，平均 12 W m-2 (5%)。可以引起3% (从0.88到0.91) 的 OLS 斜率差异。研究结果还表明，风速校正应该在 Q7.1 净辐射仪中应用，校正后的结果与 CNR1 的结果在白天有吻合较好，但在其它时段仍有较大差异，特别是在夜间，风速校正基本不起作用，使得两种仪器间差异达20 W m-2。比较表明，风速校正可以提高白天 Rn 的6%，仅降低夜间0.3%。因此，无论是用余项法还是用 OLS 线性回归法，在比较使用不同仪器的站点间的闭合状况时 (本研究的结果适用于草地 Q7.1 与 CNR1 间的比较)，可以用9：00-15：00 h 时段的数据进行比较，这样可以避免因使用不同仪器的差异所造成的影响。用该时段的数据进行比较，仪器间的差异余项法小于6 W m-2，OLS 法小于3%。 受可供能量空间变异影响，三个站点平均 EBC 的不确定性为白天66 W m-2 (19%)，夜间23 W m-2 (50%)，平均42 W m-2 (36%);或者改变 OLS 斜率11%。用最大值和最小值来衡量，EBC 最大不确定性，正午时在站点 I、II 和 III 中分别为81，114和91 W m-2。故在探讨能量平衡和能量平衡闭合问题时，必须充分考虑到这种不确定性，否则会产生偏差，或者得出错误结论。 研究还表明，即使考虑到白天所有可供能量的最大不确定性，仍然不能使能量平衡闭合。中午 (12：00 h)，站点 I，II 和 III 仍然有14±15，48±12和47±14 W m-2 的失衡不能够归因于可供能量的空间不确定性。因此，其它影响因素也需进行细致的探讨。 在两站点不同测量深度土壤热通量结果的差异性比较实验中，无论在站点 I 还是 III，均表现出一致的结论，即随通量板布置深度加深，其测量结果会越高，与浅层布置的相比，差别可高达150 W m-2。深层土壤热通量的计算仍是个难题，需进一步研究。 在不同植被结构对净辐射测定影响的实验中发现，随刈割强度增加，一天中大部分时间净辐射均减少。正午依次为413，395和388 W m-2。无论正午还是全天合计，重度刈割地点的净辐射均比不刈割对照处理少6%，而且，在整个生长季也少6%，约合40,000 W m-2。测量高度不同，不同处理间对测定结果影响不同：刈割处理中，由于下垫面较均一，结果相差不显著;而对照则表现出较高的差异，用两配对样本T检验表明差异达到极显著 (P<0.000，9:30-15:00 h data)。当使用不同新旧程度的 domes 时，对净辐射结果会产生明显的影响。新 domes 的测量结果白天明显高，晚上明显低，使用了11个月的旧 domes，峰值时，白天低估25 W m-2，晚上高估10 W m-2。说明该差异在进行能量平衡闭合计算时，不能忽略。而全用新的和全用旧的进行比较，晚上仅有2-3 W m-2差异。 考虑生态系统中非生物因子对干扰条件下生物多样性动态和功能的影响，有助于更精确地阐明生物多样性-稳定性功能的关系。为此，设计了一个单因子刈割实验——内蒙古地区一种广泛存在的土地利用方式。主要目的是研究不同强度刈割影响下，微气候变量特别是能量平衡各分量和群落结构的变化及二者的关系。连续4年刈割，占第一位的优势种明显由低矮半灌木冷蒿 (Artemisia frigida) 取代了高大丛生禾草克氏针茅 (Stipa kylovii)。重度刈割下，针茅的盖度、生物量和丛重，群落叶面积、绿色生物量、凋落物量和群落高度一致低于轻度刈割/不刈割处理。微气候由于群落特征的这些变化也呈规律性变化。与对照相比，重度刈割降低了生长季土壤含水量的47.5%，但中午和日均土壤表面温度分别增加了7.4和1.2 °C，并且增加地表下2 cm土壤温度日较差 (日最高与最低温度之差) 4.2 °C。刈割处理由于凋落物少、反射强而表现出较低的净辐射，但土壤热通量显著提高，表现为土层加热和冷却快。因此，重度刈割处理较对照降低了可供能量8%，约合52,000 W m-2 。不同刈割强度间来看，NPP 或 LAI 与土壤热通量和净辐射的比值 (G/Rn) 以及波文比 (H/LE) 间呈负相关。重度刈割处理感热通量显著提高，但潜热通量在处理间差异不显著，表明未刈割处理虽然冠层伸展大，但是并没有导致更大的水分亏缺。未刈割处理增加了抵抗物种改变的能力，而刈割处理在连续一年一割的第四年显著增加了物种数，可能与因刈割影响而导致的群落结构与微气候的改变有关。本研究表明，未刈割处理可以减轻高温干旱季节的高温和干旱胁迫，表现出对环境变化的高抵抗性。未刈割处理的凋落物层和较高的垂直结构所形成的遮荫，可以形成一个阻挡蒸发的篱笆，这是维持其水分的保证。因此，为了恢复退化草原生态系统功能，需要修复能导致微气候变化的植物群落结构，否则难以成功。 本研究立足于原创性的实验研究，在中国特有的自然草原生态系统上开展，结合不同温度梯度的三地区涡度相关系统进行了能量平衡闭合的移动比较实验，以及结合常用土地利用方式的定点能量平衡实验。在翔实的数据基础上，为涡度相关方法的陆地表面能量平衡失衡问题提供了解释。增加了对两个主要能量流——土壤热通量和净辐射空间变异规律的认识，研究对于能量平衡和湍流通量相关研究是有价值的。在三个代表性地区首次利用多个净辐射仪和土壤热通量板的结果与三个标准的涡度相关系统进行了比较，这类量化失衡原因的相关研究应受到高度重视并进一步拓展，以提高对能量失衡的认识，进而推进水热和碳循环研究向更深层次发展。

Microheterogeneous Thoria-Urania Fuels for Pressurized Water Reactors

A thorium-based fuel cycle for light water reactors will reduce the plutonium generation rate and enhance the proliferation resistance of the spent fuel. However, priming the thorium cycle with ²³⁵U is necessary, and the ²³⁵U fraction in the uranium must be limited to below 20% to minimize proliferation concerns. Thus, a once-through thorium-uranium dioxide (ThO2-UO2) fuel cycle of no less than 25% uranium becomes necessary for normal pressurized water reactor (PWR) operating cycle lengths. Spatial separation of the uranium and thorium parts of the fuel can improve the achievable burnup of the thorium-uranium fuel designs through more effective breeding of ²³³U from the ²³²Th. Focus is on microheterogeneous fuel designs for PWRs, where the spatial separation of the uranium and thorium is on the order of a few millimetres to a few centimetres, including duplex pellet, axially microheterogeneous fuel, and a checkerboard of uranium and thorium pins. A special effort was made to understand the underlying reactor physics mechanisms responsible for enhancing the achievable burnup at spatial separation of the two fuels. The neutron spectral shift was identified as the primary reason for the enhancement of burnup capabilities. Mutual resonance shielding of uranium and thorium is also a factor; however, it is small in magnitude. It is shown that the microheterogeneous fuel can achieve higher burnups, by up to 15%, than the reference all-uranium fuel. However, denaturing of the ²³³U in the thorium portion of the fuel with small amounts of uranium significantly impairs this enhancement. The denaturing is also necessary to meet conventional PWR thermal limits by improving the power share of the thorium region at the beginning of fuel irradiation. Meeting thermal-hydraulic design requirements by some of the microheterogeneous fuels while still meeting or exceeding the burnup of the all-uranium case is shown to be potentially feasible. However, the large power imbalance between the uranium and thorium regions creates several design challenges, such as higher fission gas release and cladding temperature gradients. A reduction of plutonium generation by a factor of 3 in comparison with all-uranium PWR fuel using the same initial ²³⁵U content was estimated. In contrast to homogeneously mixed U-Th fuel, microheterogeneous fuel has a potential for economic performance comparable to the all-UO2 fuel provided that the microheterogeneous fuel incremental manufacturing costs are negligibly small.

Simulations of autoignition and laminar premixed flames in methane/air mixtures diluted with hot products

This article considers constant-pressure autoignition and freely propagating premixed flames of cold methane/air mixtures mixed with equilibrium hot products at high enough dilution levels to burn within the moderate to intense low oxygen dilution (MILD) combustion regime. The analysis is meant to provide further insight on MILD regime boundaries and to identify the effect of hot products speciation. As the mass fraction of hot products in the reactants mixture increases, autoignition occurs earlier. Species profiles show that the products/reactants mixture approximately equilibrates to a new state over a quick transient well before the main autoignition event, but as dilution becomes very high, this equilibration transient becomes more prominent and eventually merges with the primary ignition event. The dilution level at which these two reactive zones merge corresponds well with that marking the transition into the MILD regime, as defined according to conventional criteria. Similarly, premixed flame simulations at high dilutions show evidence of significant reactions involving intermediate species prior to the flame front. Since the premixed flame governing equations system demands that the species and temperature gradients be zero at the "cold" boundary, flame speed cannot be calculated above a certain dilution level. Up to this point, which again agrees reasonably well with the transition into the MILD regime according to convention, the laminar burning velocity was found to increase with hot product dilution while flame thickness remained largely unchanged. Some comments on the MILD combustion regime boundary definition for gas turbine applications are included. Copyright © Taylor & Francis Group, LLC.

Formation of regular hole pattern in polymer films

Ordered macroporous materials recently have attracted much attention. A method that utilizes the condensation of monodisperse water droplets on a polymer solution is proposed for the preparation of honeycomb microporous films. Our results show that it is a general method that can be used for patterning a wide range of polymers. The presence of water vapor and polymer is necessary for the formation of regular holes in films. The formation of hexagonal packing instead of other kinds of packing takes place because the hexagonal packing has the lowest free energy. The formation mechanisms of regular hole pattern and imperfections in the hexagonal packing are proposed.

线形脑啡肽(N—Tyr~1—Gly~2—Gly~3—Phe~4—Leu~5)的NMR溶液构象研究

本文在Bruker AM-400 NMR谱仪上,在不同温度下研究了线形脑啡肽(N-Tyr~1-Gly~2-Gly~3-Phe~4-Leu~5)在DMSO中的NMR溶液构象。由NMR测试结果,得到了NH化学位移温度梯度系数、扭转角φ、χ＇约束和~1H-~1H NOE距离约束,用目标函数法计算了脑啡肽的溶液构象,分析了优势边链构象。研究结果指明了多肽骨架的柔变性且处于构象平衡中。

The dynamics of water in hydrated white bread investigated using quasielastic neutron scattering

Kargl, Florian; Sj?str?m, J.; Fernandez-Alonso, F.; Swenson, J., (2007) 'The dynamics of water in hydrated white bread investigated using quasielastic neutron scattering', Journal of Physics: Condensed Matter 19 pp.415119 RAE2008

Ocean-wide tracking of pelagic sharks reveals extent of overlap with longline fishing hotspots

Overfishing is arguably the greatest ecological threat facing the oceans, yet catches of many highly migratory fishes including oceanic sharks remain largely unregulated with poor monitoring and data reporting. Oceanic shark conservation is hampered by basic knowledge gaps about where sharks aggregate across population ranges and precisely where they overlap with fishers. Using satellite tracking data from six shark species across the North Atlantic, we show that pelagic sharks occupy predictable habitat ‘hotspots’ of high space use. Movement modelling showed sharks preferred habitats characterised by strong sea-surface-temperature gradients (fronts) over other available habitats. However, simultaneous Global Positioning System (GPS) tracking of the entire Spanish and Portuguese longline-vessel fishing fleets show an 80% overlap of fished areas with hotspots, potentially increasing shark susceptibility to fishing exploitation. Regions of high overlap between oceanic tagged sharks and longliners included the North Atlantic Current/Labrador Current convergence zone and the Mid-Atlantic Ridge south-west of the Azores. In these main regions, and sub-areas within them, shark/vessel co-occurrence was spatially and temporally persistent between years, highlighting how broadly the fishing exploitation efficiently ‘tracks’ oceanic sharks within their space-use hotspots year-round. Given this intense focus of longliners on shark hotspots our study argues the need for international catch limits for pelagic sharks and identifies a future role of combining fine-scale fish and vessel telemetry to inform the ocean-scale management of fisheries.

Comparison of Experimental PIV Data and CFD Simulations for Flow in a Diesel Particulate Filter Inlet Diffuser

Flow maldistribution of the exhaust gas entering a Diesel Particulate Filter (DPF) can cause uneven soot distribution during loading and excessive temperature gradients during the regeneration phase. Minimising the magnitude of this maldistribution is therefore an important consideration in the design of the inlet pipe and diffuser, particularly in situations where packaging constraints dictate bends in the inlet pipe close to the filter, or a sharp diffuser angle. This paper describes the use of Particle Image Velocimetry (PIV) to validate a Computational Fluid Dynamic (CFD) model of the flow within the inlet diffuser of a DPF so that CFD can be used with confidence as a tool to minimise this flow maldistribution. PIV is used to study the flow of gas into a DPF over a range of steady state flow conditions. The distribution of flow approaching the front face of the substrate was of particular interest to this study. Optically clear diffusing cones were designed and placed between pipe and substrate to allow PIV analysis to take place. Stereoscopic PIV was used to eliminate any error produced by the optical aberrations caused by looking through the curved wall of the inlet cone. In parallel to the experiments, numerical analysis was carried out using a CFD program with an incorporated DPF model. Boundary conditions for the CFD simulations were taken from the experimental data, allowing an experimental validation of the numerical results. The CFD model incorporated a DPF model, the cement layers seen in segmented filters and the intumescent matting that is commonly used to pack the filter into a metal casing. The mesh contained approximately 580,000 cells and used the realizable ?-e turbulence model. The CFD simulation predicted both pressure drop across the DPF and the velocity field within the cone and at the DPF face with reasonable accuracy, providing confidence in the use the CFD in future work to design new, more efficient cones.

Optimization of heat transfer characteristics, flow distribution, and reaction processing for a microstructured reactor/heat-exchanger for optimal performance in platinum catalyzed ammonia oxidation

The present work is focused on the demonstration of the advantages of miniaturized reactor systems which are essential for processes where potential for considerable heat transfer intensification exists as well as for kinetic studies of highly exothermic reactions at near-isothermal conditions. The heat transfer characteristics of four different cross-flow designs of a microstructured reactor/heat-exchanger (MRHE) were studied by CFD simulation using ammonia oxidation on a platinum catalyst as a model reaction. An appropriate distribution of the nitrogen flow used as a coolant can decrease drastically the axial temperature gradient in the reaction channels. In case of a microreactor made of a highly conductive material, the temperature non-uniformity in the reactor is strongly dependent on the distance between the reaction and cooling channels. Appropriate design of a single periodic reactor/heat-exchanger unit, combined with a non-uniform inlet coolant distribution, reduces the temperature gradients in the complete reactor to less than 4degreesC, even at conditions corresponding to an adiabatic temperature rise of about 1400degreesC, which are generally not accessible in conventional reactors because of the danger of runaway reactions. To obtain the required coolant flow distribution, an optimization study was performed to acquire the particular geometry of the inlet and outlet chambers in the microreactor/heat-exchanger. The predicted temperature profiles are in good agreement with experimental data from temperature sensors located along the reactant and coolant flows. The results demonstrate the clear potential of microstructured devices as reliable instruments for kinetic research as well as for proper heat management in the case of highly exothermic reactions. (C) 2002 Elsevier Science B.V. All rights reserved.

Generation of scaled protogalactic seed magnetic fields in laser-produced shock waves

The standard model for the origin of galactic magnetic fields is through the amplification of seed fields via dynamo or turbulent processes to the level consistent with present observations. Although other mechanisms may also operate, currents from misaligned pressure and temperature gradients (the Biermann battery process) inevitably accompany the formation of galaxies in the absence of a primordial field. Driven by geometrical asymmetries in shocks associated with the collapse of protogalactic structures, the Biermann battery is believed to generate tiny seed fields to a level of about 10 gauss (refs 7, 8). With the advent of high-power laser systems in the past two decades, a new area of research has opened in which, using simple scaling relations, astrophysical environments can effectively be reproduced in the laboratory. Here we report the results of an experiment that produced seed magnetic fields by the Biermann battery effect. We show that these results can be scaled to the intergalactic medium, where turbulence, acting on timescales of around 700 million years, can amplify the seed fields sufficiently to affect galaxy evolution.

In-situ Monitoring of Solid Oxide Electrolysis Cells

High temperature co-electrolysis of steam and carbon dioxide using a solid oxide cell (SOC) has been shown to be an efficient route to produce syngas (CO + H-2), which can then be converted to synthetic fuel. Optimization of co-electrolysis requires detailed understanding of the complex reactions, transport processes and degradation mechanisms occurring in the SOC during operation. Thermal imaging, Raman spectroscopy and Diffuse Reflectance Infrared Fourier Transform Spectroscopy are being developed to probe in-situ both the reactions occurring during operation and any associated changes within the structure of the electrodes and electrolyte. Here we discuss the challenges in designing experimental apparatus suitable for high temperature operation with optical spectroscopic access to the areas of the SOC that are of interest. In particular, issues with sealing, temperature gradients, signal strength and cell configuration are discussed and final designs are presented. Preliminary results obtained during co-electrolysis operation are also presented.