Determinación del perfil de exposición potencial a contaminantes químicos mediante el uso de metodologías de evaluación simplificada en trabajadores de autopartes en el barrio La Paz, Bogotá 2015

Las actividades de mantenimiento automotriz en el sector de autopartes conlleva el uso de agentes químicos bajo diversas circunstancias de exposición, tanto en las condiciones de manipulación de productos químicos como a las características propias de cada actividad de mantenimiento asociado a las tareas específicas del trabajo. Tradicionalmente la evaluación de contaminantes químicos desde la visión de la Higiene Ocupacional incluye la evaluación cuantitativa de la exposición mediante técnicas instrumentales concretas y estandarizadas, determinando el nivel de concentración en aire a la cual un trabajador se ve expuesto y que, en comparación con valores límites permisibles (VLPs), inducen el establecimiento de medidas de control y vigilancia, según el nivel de riesgo caracterizado. Sin embargo es evidente la limitación de la implementación de esta sistemática en particular en micros y pequeñas empresas que carecen de los recursos suficientes para abordar la problemática de forma objetiva. En este contexto diversas metodologías de evaluación cualitativa o subjetiva se han desarrollado por distintas organizaciones en el mundo con el fin de disminuir la brecha entre el establecimiento de medidas de control y la valoración del riesgo, ofreciendo alternativas confiables para la toma de decisiones preventivas sin la necesidad de acudir a mediciones cuantitativas. Mediante la presente investigación se pretende validar la efectividad en el uso de una herramienta de evaluación simplificada del riesgo químico propuesta por el INRS (Institut National de Recherche et de Sécurité Francés) mediante la determinación del perfil de exposición potencial a contaminantes químicos de la población laboral de 36 almacenes de autopartes ubicados en el barrio la Paz de la ciudad de Bogotá, Colombia, divididos según énfasis de actividades en Partes Externas, Partes Eléctricas e Inyección, Partes Mecánicas, Partes Múltiples, a través de un estudio de corte transversal. El estudio permitió Jerarquizar el riesgo potencial, valorar el riesgo vía inhalatoria y dérmica para finalmente construir el perfil de exposición potencial a contaminantes químicos de trabajadores. La información de las variables de análisis fue consolidada en una herramienta informática diseñada para tal fin, la cual facilito la administración de los datos y su respectivo análisis. Con base en los hallazgos fue posible establecer los productos químicos que de acuerdo a las condiciones de trabajo y circunstancias de exposición sugieren medidas específicas para la disminución del riesgo potencial de acuerdo a la calificación global de los agentes, permitiendo deducir la viabilidad de la aplicación de herramientas de valoración cualitativa para la evaluación del riesgo químico como estrategia de prevención primaria.

The growth effects of EU cohesion policy: a meta-analysis. Bruegel Working Paper 2012/14, October 2012

We run a standard income convergence analysis for the last decade and confirm an already established finding in the growth economics literature. EU countries are converging. Regions in Europe are also converging. But, within countries, regional disparities are on the rise. At the same time, there is probably no reason for EU Cohesion Policy to be concerned with what happens inside countries. Ultimately, our data shows that national governments redistribute well across regions, whether they are fiscally centralised or decentralised. It is difficult to establish if Structural and Cohesion Funds play any role in recent growth convergence patterns in Europe. Generally, macroeconomic simulations produce better results than empirical tests. It is thus possible that Structural Funds do not fully realise their potential either because they are not efficiently allocated or are badly managed or are used for the wrong investments, or a combination of all three. The approach to assess the effectiveness of EU funds should be consistent with the rationale behind the post-1988 EU Cohesion Policy. Standard income convergence analysis is certainly not sufficient and should be accompanied by an assessment of the changes in the efficiency of the capital stock in the recipient countries or regions as well as by a more qualitative assessment. EU funds for competitiveness and employment should be allocated by looking at each region’s capital efficiency to maximise growth generating effects or on a pure competitive.

To what extent are EU steel companies susceptible to competitive loss due to climate policy?

In recognition of their competitive vulnerability, a set of special rules have been devised for managing sectors such as steel and cement within the EU ETS. These rules basically seek to set sector specific performance benchmarks and reward top performers. However, the steel sector as a whole will receive the vast majority of its allowances for free in Phase III. Perceptions of competitive vulnerability have been largely based on inherently hypothetical analyses which rely heavily on counterfactual scenario and abatement cost estimates often provided by firms themselves. This paper diverges from these approaches by providing a qualitative assessment of the two key reasons underpinning the competitive vulnerability argument of the EU Steel Companies based on interviews and case study involving the three largest producers of steel within the EU – AcerlorMittal, Corus, and ThyssenKrupp. We find that these arguments provide only partial and weak justifications for competitive loss and discriminatory treatment in the EUETS. This strategy is difficult to counter by governments due to information asymmetry; and it appears to have proved very successful insofar as it has helped the industry to achieve free allocation in Phases I-III of EU ETS by playing up the risk of carbon leakage.

The impact of information and communications technology on commercial real estate in the new economy

Purpose – This paper seeks to critically review the conceptual frameworks that have been developed for assessing the impact of information and communications technology (ICT) on real estate. Design/methodology/approach – The research is based on a critical review of existing literature and draws from examples of previous empirical research in the field. Findings – The paper suggests that a “socio-technical framework” is more appropriate to examine ICT impact in real estate than other “deterministic” frameworks. Therefore, ICT is an important part of the new economy, but must be seen in the context of a number of other social and economic factors. Research limitations/implications – The research is based on a qualitative assessment of existing frameworks, and by using examples from commercial real estate, assesses the extent to which a “socio-technical” framework can aid understanding of ICT impact. Practical implications – The paper is important in highlighting a number of the main issues in conceptualising ICT impact in real estate and also critically examines the emergence of a new economy in the information society within the general context of real estate. The paper also highlights research gaps in the field. Originality/value – The paper deconstructs the myths of the “death of real estate” and “productivity increase means jobs loss”, in relation to office real estate. Finally, it examines some of the ways in which ICT is impacting on real estate and suggests the most important components for a future research agenda in the field of ICT and real estate impact, and will be of value to property investors, facilities managers, developers, financiers, and others.

Identifiering av parametrar till ackumulatortanken Solus1050 från consolar - en metodbeskrivning

This report describes the work done creating a computer model of a kombi tank from Consolar. The model was created with Presim/Trnsys and Fittrn and DF were used to identify the parameters. Measurements were carried out and were used to identify the values of the parameters in the model. The identifications were first done for every circuit separately. After that, all parameters are normally identified together using all the measurements. Finally the model should be compared with other measurements, preferable realistic ones. The two last steps have not yet been carried out, because of problems finding a good model for the domestic hot water circuit.The model of the domestic hot water circuit give relatively good results for low flows at 5 l/min, but is not good for higher flows. In the report suggestions for improving the model are given. However, there was not enough time to test this within the project as much time was spent trying to solve problems with the model crashing. Suggestions for improving the model for the domestic circuit are given in chapter 4.4. The improved equations that are to be used in the improved model are given by equation 4.18, 4.19 and 4.22.Also for the boiler circuit and the solar circuit there are improvements that can be done. The model presented here has a few shortcomings, but with some extra work, an improved model can be created. In the attachment (Bilaga 1) is a description of the used model and all the identified parameters.A qualitative assessment of the store was also performed based on the measurements and the modelling carried out. The following summary of this can be given: Hot Water PreparationThe principle for controlling the flow on the primary side seems to work well in order to achieve good stratification. Temperatures in the bottom of the store after a short use of hot water, at a coldwater temperature of 12°C, was around 28-30°C. This was almost independent of the temperature in the store and the DHW-flow.The measured UA-values of the heat exchangers are not very reliable, but indicates that the heat transfer rates are much better than for the Conus 500, and in the same range as for other stores tested at SERC.The function of the mixing valve is not perfect (see diagram 4.3, where Tout1 is the outlet hot water temperature, and Tdhwo and Tdhw1 is the inlet temperature to the hot and cold side of the valve respectively). The outlet temperature varies a lot with different temperatures in the storage and is going down from 61°C to 47°C before the cold port is fully closed. This gives a problem to find a suitable temperature setting and gives also a risk that the auxiliary heating is increased instead of the set temperature of the valve, when the hot water temperature is to low.Collector circuitThe UA-value of the collector heat exchanger is much higher than the value for Conus 500, and in the same range as the heat exchangers in other stores tested at SERC.Boiler circuitThe valve in the boiler circuit is used to supply water from the boiler at two different heights, depending on the temperature of the water. At temperatures from the boiler above 58.2°C, all the water is injected to the upper inlet. At temperatures below 53.9°C all the water is injected to the lower inlet. At 56°C the water flow is equally divided between the two inlets. Detailed studies of the behaviour at the upper inlet shows that better accuracy of the model would have been achieved using three double ports in the model instead of two. The shape of the upper inlet makes turbulence, that could be modelled using two different inlets. Heat lossesThe heat losses per m3 are much smaller for the Solus 1050, than for the Conus 500 Storage. However, they are higher than those for some good stores tested at SERC. The pipes that are penetrating the insulation give air leakage and cold bridges, which could be a major part of the losses from the storage. The identified losses from the bottom of the storage are exceptionally high, but have less importance for the heat losses, due to the lower temperatures in the bottom. High losses from the bottom can be caused by air leakage through the insulation at the pipe connections of the storage.

Corporate capital structure revisited: incomplete markets and default

After Modigliani and Miller (1958) presented their capital structure irrelevance proposition, analysis of corporate Önancing choices involving debt and equity instruments have generally followed two trends in the literature, where models either incorporate informational asymmetries or introduce tax beneÖts in order to explain optimal capital structure determination (Myers, 2002). None of these features is present in this paper, which develops an asset pricing model with the purpose of providing a positive theory of corporate capital structure by replicating main aspects of standard contractual practice observed in real markets. Alternatively, the imperfect market structure of the economy is tailored to match what is most common in corporate reality. Allowance for default on corporate debt with an associated penalty of seizure of Örmís future cash áows by creditors is introduced, for instance. In this context, a qualitative assessment of Önancial managersídecisions is carried out through numerical procedures.

Satisfação de clientes em instituições sem fins lucrativos : um estudo de caso : avaliando as percepções dos públicos envolvidos

Este trabalho de conclusão aborda a satisfação de clientes em uma organização sem fins lucrativos. Através de um estudo de caso, procedeu-se uma avaliação qualitativa por meio de observação participante do pesquisador, percepções dos professores e acadêmicos envolvidos no atendimento prestado pelo Serviço de Nutrição do Centro Universitário Franciscano- UNIFRA, e também dos usuários finais do serviço. Objetivou-se, assim, avaliar como a satisfação de clientes é gerenciada neste serviço, usando-se as variáveis de pesquisa: estratégia, sistemas e pessoas como norteadoras das investigações efetuadas. Com o intuito de atingir os propósitos do estudo, o público envolvido no atendimento, composto por coordenador do serviço e professores, foi ouvido por meio de entrevistas semi-estruturadas. No público constituído de acadêmicos que prestam o atendimento e usuários do serviço foi utilizada a técnica de entrevista de grupos focalizados. Para o tratamento dos dados coletados procedeu-se a sua descrição, análise e interpretação. A análise dos resultados foi apresentada em blocos que contemplam: estratégia, sistemas e pessoas. As opiniões emitidas pelos públicos consultados e a observação do pesquisador apontaram acertos e oportunidades de melhoria no serviço prestado, dando indicativos de dimensões importantes para o gerenciamento da satisfação de clientes deste serviço.

SINAES: as diferentes faces da avaliação na UFRN

This thesis entitled SINAES: the different faces of the evaluation at UFRN, aims to analyze the configuration that the national policy for assessment in higher education has taken on UFRN. We assume that in recent years there are an oscillation between the concepts of evaluation, according with the logic of public administration it has preferred an approach that presents itself as a promoter of quality, sometimes with regulatory aspects, sometimes with educational ones. The text discusses the use of the new assessment tools for higher education placing them under the new demands on state reform context in which this is to promote and measure quality based on the values of excellence and competitiveness. This movement arises from the redefinition of the role of the State that has been taking features of Evaluator State. From a historical review of government initiatives in the field of evaluation, we analyze the characteristics of assessment policies outlined over the past decades. We are based on the theoretical method that aims to examine the multiple determinants that shape a particular reality from the larger movement of totality. To identify, in this case, connections and ruptures that have emerged over the history of assessment policies aimed at higher education by checking their determinants in order to better explain the reality. To investigate the object of this study we used as instruments: the research literature and research documents, the semi-structured interviews and non-participant observation. The study revealed that there are different practices of evaluation and that before to establishment the SINAES program, the UFRN already had a culture of an institutional assessment, more participatory and democratic, opposing to the rigidity of the self-assessment in SINAES program that it was instituted by the Commission for assessment (CPA). We also noticed that the implementation of the SINAES at URFN has been performed very slowly and the breadth and complexity of the evaluation process has contributed to hinder its implementation in all dimensions provided by MEC. Although it was observed that in its operationalization the SINAES has assumed a more normative assessment and directed to establish rankings between courses and higher education schools than to establish a more qualitative assessment in this system. As regards the evaluation of the undergraduate course studied on this research and subjected to the three dimensions of evaluation proposed by SINAES (self-assessment, Evaluation of Courses and ENADE) it was not possible to verify an effective integration between the methods of assessing conducted. The results are considered separately, in only a partial view of the course evaluated the proposal what pits the SINAES as a system that involves the totality

Kinetics of cellular component in inflammatory response induced by different stimuli in the swim bladder of pacu, Piaractus mesopotamicus Holmberg 1887 (Characidae)

The present study assessed the kinetics of cell accumulation at the site of inflammation induced by thioglycolate, Escherichia coli lipopolysaccharide (LPS) and heat-inactivated Aeromonas hydrophila, in the pacu, Piaractus mesopotamicus (Characidae), swim bladder. A quantitative, as well as qualitative, assessment was done of all the cells present in the exudate at 6, 24, and 48 h (n = 8) after inoculation of inflammatory agents. The results show that the thioglycolate was the irritant to induce higher total inflammatory cell accumulation when compared to the control group, 6 h after insult (P < 0.05). Inoculation of heat-inactivated Aeromonas hydrophila induced progressive accumulation of total inflammatory cells, with cell number peaking after 24 h and being significantly higher than observed in the other groups (P < 0.05). Injection of LPS also induced greater cell accumulation when compared to the control group (P < 0.05), although in lower numbers than those induced by the other two irritants. All irritants injected induced significantly greater accumulation of lymphocytes and thrombocytes when compared to the control group (P < 0.05).

Desempenho operacional e ambiental de unidades de reciclagem e disposição final de resíduos sólidos domésticos financiadas pelo ICMS Ecológico de Minas Gerais

Este estudo avalia sistemas de reciclagem e de disposição de resíduos sólidos domésticos que possuem incentivos fiscais definidos pela Lei Estadual nº 13.803/2000 de Minas Gerais. A pesquisa foi desenvolvida por análise de documentação de licenciamento ambiental de aterros sanitários e usinas de reciclagem e compostagem de resíduos financiados pela referida Lei e por visitas às unidades sanitárias, sendo usados os instrumentos metodológicos da agência ambiental do Estado de São Paulo (CETESB) que avaliam as condições de instalação e operação desses tipos de empreendimentos. do estudo, constatou-se que o incentivo de Minas Gerais, definido pela Lei do ICMS Ecológico, traz importantes benefícios ambientais aos municípios, embora ainda seja reduzido o número dos contemplados por esse fomento à gestão dos resíduos sólidos urbanos. Conclui-se, também, que algumas das unidades estudadas apresentam problemas de natureza ambiental e operacional.

Desenvolvimento de métodos analíticos qualitativos para a análise de darunavir comprimidos

Darunavir is a protease inhibitor used in the treatment of HIV infection. It is a pillar of the drug cocktail for patients diagnosed with the virus. Quality control in the pharmaceutical industry, to verify the content of active substance and study the physicochemical characteristics of the drug, is essential to ensure final product quality. Until now, standardized methods for the analysis of darunavir have not been available in official compendia. This justifies new research, to develop and validate analytical methods, as well as physicochemical and pharmaceutical analysis for this drug, both as a raw material and a finished product. Thus, in this study, (a) the average weight of darunavir tablets and (b) the melting point of the pure drug were determined, and the following analytical techniques were performed: (c) thin-layer chromatography, (d) ultraviolet spectroscopy, (e) infrared spectroscopy and (f) high performance liquid chromatography. By developing the above techniques, it is possible to make a qualitative assessment of the quality of darunavir tablets.

Estudo histomorfométrico de incisivos de ratos submetidos a diferentes níveis de luxação extrusiva e subluxação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo tomográfico do encéfalo de cães dolicocefálicos, mesaticefálicos e branquicefálicos clinicamente sadios

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação entre a percepção e a normatização sobre a iluminação em ambientes ocupacionais: estudo de caso em uma empresa florestal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da indexação em bibliotecas universitárias: uma aplicação em catálogos online

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)