Public-private partnerships and efficiency in public procurement of primary healthcare infrastructure: a qualitative research in the NHS UK

Aim There is growing interest in the contribution of public-private partnerships (PPPs) bridging the shortage of financial resources and management expertise in developing public healthcare infrastructure. However, few studies have evidenced PPPs’ ability in increasing efficiency in public procurement of primary healthcare infrastructure. The aim of this study was to assess to what extent PPPs would increase efficiency in public procurement of primary healthcare facilities. Subject and Methods A qualitative analysis, adopting a realistic research evaluation method, used data collected from a purposive sample of public (n=23) and private sector staff (n=2) directly involved in the UK National Health Service Local Improvement Finance Trust (LIFT). Results We find a positive association of LIFT helping to bridge public sector capital shortages for developing primary care surgeries. LIFT is negatively associated with inefficient procurement because it borrows finance from private banks, leaving public agencies paying high interest rates. The study shows that some contextual factors and mechanisms in LIFT play a major part in obstructing public staff from increasing procurement efficiency. Conclusion PPP’s ability to increase efficiency may be determined by contextual factors and mechanisms that restrict discretion over critical decisions by frontline public sector staff. Developing their capacity in monitoring PPP activities may make partnerships more efficient.

Global Internet governance and the public interest in communication

Élaborée à partir d’une étude de cas extensive focalisant sur les perspectives multiples et concurrentes ayant émergé lors des négociations sur la gouvernance de l’Internet, thématique ayant dominé l’agenda politique du Sommet mondial sur la société de l’information (SMSI), cette thèse examine les manières avec lesquelles les débats mondiaux sur la gouvernance de l’Internet influencent la notion d’intérêt public en communication. Établie sur la base d’une observation participante extensive, d’entrevues semi-structurées et de l’analyse d’une documentation formelle et informelle associée au SMSI, cette thèse fait état de l’émergence des enjeux associés à la gouvernance de l’Internet au SMSI et présente une analyse approfondie des négociations ayant porté sur cet enjeu. Le cadre théorique développé par Lawrence Lessig au travers duquel « le code est la loi » est appliqué afin d’expliquer comment les différents acteurs ont débattu et ultimement atteint un consensus sur les frontières venant séparer les enjeux normatifs de politique publique et les questions techniques de régulation et de gestion du réseau. Cette thèse discute également de l’évolution des débats autour de la gouvernance mondiale de l’Internet ayant pris place à la suite de la conclusion du SMSI. Sur la base de cette étude de cas, un ensemble de conclusions sont formulées sur les acteurs et les caractéristiques institutionnelles ayant influencé les négociations sur la gouvernance de l’internet. Il est également suggéré que le SMSI a redéfini une discussion étroite sur la gestion d’un ensemble de fonctions techniques de l’Internet en un domaine de politique publique plus large de gouvernance mondiale de l’Internet. Il est également défendu que la notion d’intérêt public dans la gouvernance mondiale de l’Internet est conceptualisée autour des processus de participation et d’intégration des différentes parties prenantes au processus politique. Les implications directes et indirectes qui découlent de ce constat pour comprendre plus largement la notion d’intérêt public dans le domaine de la communication sont également présentées et discutées. En conclusion, cette thèse s’interroge sur les implications programmatiques des éléments ayant été précédemment soulevées pour la recherche médiatique et communicationnelle.

Investigations on polyaniline based systems for technologically important applications and some novel polymers as prospective candidates for fabricating polymer light emitting diodes

Light emitting polymers (LEP) have drawn considerable attention because of their numerous potential applications in the field of optoelectronic devices. Till date, a large number of organic molecules and polymers have been designed and devices fabricated based on these materials. Optoelectronic devices like polymer light emitting diodes (PLED) have attracted wide-spread research attention owing to their superior properties like flexibility, lower operational power, colour tunability and possibility of obtaining large area coatings. PLEDs can be utilized for the fabrication of flat panel displays and as replacements for incandescent lamps. The internal efficiency of the LEDs mainly depends on the electroluminescent efficiency of the emissive polymer such as quantum efficiency, luminance-voltage profile of LED and the balanced injection of electrons and holes. Poly (p-phenylenevinylene) (PPV) and regio-regular polythiophenes are interesting electro-active polymers which exhibit good electrical conductivity, electroluminescent activity and high film-forming properties. A combination of Red, Green and Blue emitting polymers is necessary for the generation of white light which can replace the high energy consuming incandescent lamps. Most of these polymers show very low solubility, stability and poor mechanical properties. Many of these light emitting polymers are based on conjugated extended chains of alternating phenyl and vinyl units. The intra-chain or inter-chain interactions within these polymer chains can change the emitted colour. Therefore an effective way of synthesizing polymers with reduced π-stacking, high solubility, high thermal stability and high light-emitting efficiency is still a challenge for chemists. New copolymers have to be effectively designed so as to solve these issues. Hence, in the present work, the suitability of a few novel copolymers with very high thermal stability, excellent solubility, intense light emission (blue, cyan and green) and high glass transition temperatures have been investigated to be used as emissive layers for polymer light emitting diodes.

Categorization and construction of rule based systems

Expert systems have been increasingly popular for commercial importance. A rule based system is a special type of an expert system, which consists of a set of ‘if-then‘ rules and can be applied as a decision support system in many areas such as healthcare, transportation and security. Rule based systems can be constructed based on both expert knowledge and data. This paper aims to introduce the theory of rule based systems especially on categorization and construction of such systems from a conceptual point of view. This paper also introduces rule based systems for classification tasks in detail.

Public real estate and the term structure of interest rates: a cross-country study

Using a variation of the Nelson-Siegel term structure model we examine the sensitivity of real estate securities in six key global markets to unexpected changes in the level, slop and curvature of the yield curve. Our results confirm the time-sensitive nature of the exposure and sensitivity to interest rates and highlight the importance of considering the entire term structure of interest rates. One issue that is of particular of interest is that despite the 2007-9 financial crisis the importance of unanticipated interest rate risk weakens post 2003. Although the analysis does examine a range of markets the empirical analysis is unable to provide definitive evidence as to whether REIT and property-company markets display heightened or reduced exposure.

Production of Australian freshwater crayfish in earthen-based systems using pelleted diets and forage crops as food

Juvenile Cherax destructor (commonly called theyabby) were cultured in earthen-based ponds and tanks for 70–105d, and were fed pellets and/or a forage crop of the perennialwhiteclover, Trifolium repens. Three supplementary feedingstrategies were evaluated. Yabby growth on pellets consistently exceeded (by67–159%) that obtained on clover. Base-line yields for extensiveproduction systems are around 400 kg ha^–1. Thesupplementary addition of T. repens produced yields of 635kg ha^–1 (in ponds) to 1086 kgha^–1 (in tanks). The sequential addition of cut-cloverto tanks stimulated growth to levels approaching those achieved on pellets.Yabbies stocked into ponds at 17 m^–2 and fed 33%protein pellets for 100 d, resulted in a yield of 1117 kgha^–1.Pellet inputs at a rate of 129–249 g m^–2(dry matter) and 38–83 g m^–2 (protein) over70–100 d resulted in acceptable growth and feed utilisationindices. Clover inputs of 534–682 g m–2 (asdry matter) or 84–177 g m^–2 (as protein)produced reasonable growth rates but poor feed utilisation indices. Aconsiderable quantity of the dry matter and protein content of clover waseitherinefficiently utilised or directed into other production pathways. In tanks,clover inputs from 113–296 g m^–2 (drymatter) and 24–54 g m^–2 (protein) weresufficient to maintain high growth rates for 4 weeks, while in ponds, inputs of21 g m^–2 (dry matter) and 4.3 gm^–2 (protein) were sufficient for 3 weeks. During theearly weeks of production no growth advantage was gained by providing pelletstoanimals cultured in forage-based systems. Forage depletion occurred after3–4 weeks and was probably a major growth limiting factor.

Public interest, ethics, and the balanced scorecard: implications for the accounting profession

The accounting profession bos been grappling with the issue of public interest responsibility for a number of years. The aim of this paper is to examine how a balanced scorecard (BSC) model can be used by the accounting profession to more effectively incorporate a public interest responsibility in its strategic framework. By using a BSC model, the paper provides an integrated framework for translating strategic values into a comprehensive set of objectives, performance measures and improvement actions.

Modelling and Administration of Contract-Based Systems

Mirroring the paper versions exchanged between businesses today, electronic contracts offer the possibility of dynamic, automatic creation and enforcement of restrictions and compulsions on agent behaviour that are designed to ensure business objectives are met. However, where there are many contracts within a particular application, it can be difficult to determine whether the system can reliably fulfil them all; computer-parsable electronic contracts may allow such verification to be automated. In this paper, we describe a conceptual framework and architecture specification in which normative business contracts can be electronically represented, verified, established, renewed, etc. In particular, we aim to allow systems containing multiple contracts to be checked for conflicts and violations of business objectives. We illustrate the framework and architecture with an aerospace example.

Potential applications of discrete-event simulation and fuzzy rule-based systems to structural reliability and availability

This chapter discusses and illustrates some potential applications of discrete-event simulation (DES) techniques in structural reliability and availability analysis, emphasizing the convenience of using probabilistic approaches in modern building and civil engineering practices. After reviewing existing literature on the topic, some advantages of probabilistic techniques over analytical ones are highlighted. Then, we introduce a general framework for performing structural reliability and availability analysis through DES. Our methodology proposes the use of statistical distributions and techniques – such as survival analysis – to model component-level reliability. Then, using failure- and repair-time distributions and information about the structural logical topology (which allows determination of the structural state from their components’ state), structural reliability, and availability information can be inferred. Two numerical examples illustrate some potential applications of the proposed methodology to achieving more reliable and structural designs. Finally, an alternative approach to model uncertainty at component level is also introduced as ongoing work. This new approach is based on the use of fuzzy rule-based systems and it allows the introduction of experts’ opinions and evaluations in our methodology.