Effective Surface Water Quality Policies: A Contrast of Policies in the United States and the European Union

The United States and the European Union each have their own policy approach to protect surface water quality. Both policy approaches are similar in many ways. Both rely heavily on command and control. However, there are differences in the application of the details. Both the U.S. and E.U. began current efforts to protect surface water quality in the 1970s, yet quality continues to less than desired in both places. Both have reduced point source pollutants but have had difficulty controlling non-point source pollutants even though policies have been in place for many decades. The successes and failures of the two policies are studied in this project to determine which aspects of both policies will best protect surface water quality in an increasingly complex future.

Technical report of construction on modification of Grand Coulee Feeder Canal /

"Work Performed in 1977 through 1981 Under Specifications No. DC-7292"

Cultural value orientations and HRM policies and practices:an empirical study of Oman

This study empirically examined the influence of cultural orientations on employee preferences of human resource management (HRM) policies and practices in Oman. Data were collected from 712 employees working in six large Omani organisations. The findings indicated that there were a number of cultural orientation differences among Omani employees based on age, educational and work experience. The findings showed a strong orientation towards mastery, harmony, thinking and doing, and a weak orientation towards hierarchy, collectivism, subjugation, and human nature-as-evil. The results have demonstrated a clear link between value orientations and preferences for particular HRM policies and practices. Group-oriented HRM practices were preferred by those who scored high on collectivism and being orientations, and those who scored low on thinking and doing orientations. Hierarchy-oriented HRM practices were preferred by those scoring high on hierarchy, subjugation and human nature-as-bad orientations, and those scoring low on thinking and mastery orientations. Finally, preference for loose and informal HRM practices was positively associated with being, and negatively associated with thinking, doing, and harmony orientations. The theoretical and practical implications of these findings are discussed in detail.

Depth propagation and surface construction in 3-D vision

Motion discontinuities can signal object boundaries where few or no other cues, such as luminance, colour, or texture, are available. Hence, motion-defined contours are an ecologically important counterpart to luminance contours. We developed a novel motion-defined Gabor stimulus to investigate the nature of neural operators analysing visual motion fields in order to draw parallels with known luminance operators. Luminance-defined Gabors have been successfully used to discern the spatial-extent and spatial-frequency specificity of possible visual contour detectors. We now extend these studies into the motion domain. We define a stimulus using limited-lifetime moving dots whose velocity is described over 2-D space by a Gabor pattern surrounded by randomly moving dots. Participants were asked to determine whether the orientation of the Gabor pattern (and hence of the motion contours) was vertical or horizontal in a 2AFC task, and the proportion of correct responses was recorded. We found that with practice participants became highly proficient at this task, able in certain cases to reach 90% accuracy with only 12 limited-lifetime dots. However, for both practised and novice participants we found that the ability to detect a single boundary saturates with the size of the Gaussian envelope of the Gabor at approximately 5 deg full-width at half-height. At this optimal size we then varied spatial frequency and found the optimum was at the lowest measured spatial frequency (0.1 cycle deg-1 ) and then steadily decreased with higher spatial frequencies, suggesting that motion contour detectors may be specifically tuned to a single, isolated edge.

A projektfinanszírozás egyedi jellegzetességei (The individual characteristics of project finance)

A szerző cikkében a projektfinanszírozás különleges ismertetőjegyeit kívánja bemutatni – úgymint a projektfinanszírozás fejlődését, a projektfinanszírozás és a vállalatfinanszírozás fontosabb különbségeit, valamint a sikeres projektfinanszírozás előfeltételeit. Ezen kívül foglalkozik még a projektfinanszírozás során alkalmazott pénzügyi mutatószámrendszer, e finanszírozási forma lehetséges hitel- és tőkeforrásai, továbbá a projektfinanszírozás során alkalmazott biztosítékok köre. Végezetül pedig a kivitelezési és üzemeltetési kockázatot elemzi, mint a projektfinanszírozás egyik legfontosabb kockázati tényezőjét. _____ In this article the author presents the special features of project finance, such as the development of project financing, important differences of project finance and corporate finance, as well as the preconditions for successful project financing. The author demonstrates the financial scorecards which are used in project finance, possible debt and equity sources of this financial form, and the securities which are used in the project finance. Finally, he analyzes the construction and operational risk, as one of the major risk factors for project finance.

Mechanical properties of adobe blocks used in building construction in Huambo Province - Angola

Despite significant advances in building technologies with the use of conventional construction materials (as concrete and steel), which significantly have driven the construction industry, earth construction have demonstrated its importance and relevance, as well as it has matched in an efficient and eco-friendly manner the social housing concerns. The diversity of earth construction techniques allowed this material to adapt to different climatic, cultural and social contexts until the present time. However, in Angola, the construction with earth is still associated with population fringes of weak economic resources, for which, given the impossibility of being able to acquire modern construction materials (steel, cement, brick, among others), they resort to the use of available natural materials. Furthermore, the lack of scientific and technical knowledge justifies the negative appreciation of traditional building techniques, and the derogatory way how are considered the earth constructions in Angolan territory. Given the country's current development status, and taking into account the environmental requirements and the real socio-economic sustainability of Angola, it is considered that one of the viable and adequate options, could be the recovering and upgrading of the ancestral techniques of earth construction. The purpose of this research is to develop the technical and scientific knowledge in order to improve and optimize these construction solutions, responding to the real problems of housing quality as well as to the current social, economic and environmental sustainability requirements. In this paper, a description of the physical and mechanical characteristics of the adobes typically used in the construction of traditional houses in some localities of Huambo, province in Angola, is carried out. The methodology was based on mechanical in-situ testing in adobe blocks manufactured with traditional procedures: i) tensile strength evaluated with the bending test and compressive strength test on earth blocks specimens; and, ii) durability and erodibility test by Geelong method adopting the New Zealand standard (NZS) procedures (4297: 1998; 4297: 1998 and 4297: 1999). The results allow the characterization of the materials used in the construction of raw earth in the Huambo region, contributing to the development of knowledge of these sustainable and traditional housing constructive solutions with a strong presence in Angola [1, 2]. This study is part of a larger project in the area of Earth Construction [3], which aims to produce knowledge which can stimulate the use of environmental friendly construction materials and contribute to develop constructive solutions with improved performance, durability, comfort, safety and sustainability.

[food Insecurity In Brazilian Families With Children Under Five Years Of Age].

This article analyzes food insecurity and hunger in Brazilian families with children under five years of age. This was a nationally representative cross-sectional study using data from the National Demographic and Health Survey on Women and Children (PNDS-2006), in which the outcome variable was moderate to severe food insecurity, measured by the Brazilian Food Insecurity Scale (EBIA). Prevalence estimates and prevalence ratios were generated with 95% confidence intervals. The results showed a high prevalence of moderate to severe food insecurity, concentrated in the North and Northeast regions (30.7%), in economic classes D and E (34%), and in beneficiaries of conditional cash transfer programs (36.5%). Multivariate analysis showed that the socioeconomic relative risks (beneficiaries of conditional cash transfers), regional relative risks (North and Northeast regions), and economic relative risks (classes D and E) were 1.8, 2.0 and 2.4, respectively. Aggregation of the three risks showed 48% of families with moderate to severe food insecurity, meaning that adults and children were going hungry during the three months preceding the survey.

Insegurança alimentar em domicílios brasileiros com crianças menores de cinco anos

This article analyzes food insecurity and hunger in Brazilian families with children under five years of age. This was a nationally representative cross-sectional study using data from the National Demographic and Health Survey on Women and Children (PNDS-2006), in which the outcome variable was moderate to severe food insecurity, measured by the Brazilian Food Insecurity Scale (EBIA). Prevalence estimates and prevalence ratios were generated with 95% confidence intervals. The results showed a high prevalence of moderate to severe food insecurity, concentrated in the North and Northeast regions (30.7%), in economic classes D and E (34%), and in beneficiaries of conditional cash transfer programs (36.5%). Multivariate analysis showed that the socioeconomic relative risks (beneficiaries of conditional cash transfers), regional relative risks (North and Northeast regions), and economic relative risks (classes D and E) were 1.8, 2.0 and 2.4, respectively. Aggregation of the three risks showed 48% of families with moderate to severe food insecurity, meaning that adults and children were going hungry during the three months preceding the survey.

Análise do comportamento de estruturas através de ensaios de carga

A engenharia civil, rege-se pela garantia de segurança e de funcionalidade das obras que projeta e executa. Para cumprir tais requisitos, é necessário durante a sua vida útil, no final da construção, reforço ou reabilitação, proceder à avaliação da conformidade entre o comportamento real da estrutura e os pressupostos subjacentes ao projeto. Esta dissertação tem como objetivo a compreensão e análise do comportamento estrutural da Ponte sobre o Rio Sorraia, através da realização de ensaios de carga apoiados pela conceção de um modelo numérico devidamente calibrado, capaz de simular a resposta da estrutura, o mais próximo possível do observável na realidade. Para alcançar o objetivo pré definido elencam-se as metodologias relevantes, descrevem-se os tipos de ensaios de carga realizados em pontes/viadutos e faz-se referência aos aparelhos de medição que estão na base da instrumentação aplicada em obras. Esta introdução foca-se ainda na modelação numérica, permitindo o conhecimento básico necessário para a criação e atualização de modelos numéricos de pontes. Relativamente ao caso de estudo expõe-se a realização do ensaio de carga, descrevendo todo o processo, bem como os resultados obtidos ao nível das grandezas de medição estudadas. Aqui é concebido um modelo numérico base da ponte, alvo de discussão ao nível do comportamento estrutural, baseada na validação dos resultados obtidos por via experimental, através da comparação com os obtidos por via numérica. Por fim, o estudo e seleção de diversos parâmetros da modelação, facultando a calibração do modelo numérico da ponte. Os resultados obtidos neste modelo comprovam o seu elevado potencial, no apoio à observação e compreensão do comportamento de estruturas através da realização de ensaios de carga. O sucesso da realização de uma análise do comportamento de estruturas, através de ensaios de carga, depende assim fundamentalmente, da correta execução do ensaio, da correta conceção e atualização do modelo numérico e da interligação entre os resultados experimentais e numéricos.

Desenho e desenvolvimento de um Sistema de Informação em Oracle ADF

Um Sistema de Informação consiste num sistema capaz de armazenar, organizar e estruturar dados para ajudar a responder às necessidades das empresas, passando também pela capacidade de resposta às questões diárias das empresas. Assim, um Sistema de Informação pode ser definido como o software que ajuda a organizar e analisar dados, tendo como objetivo fornecer informação útil na altura certa para que possa ser utilizada para a tomada de decisões ou para uma gestão mais eficiente dos diversos fluxos que uma empresa pode conter. Neste sentido, o projeto apresentado centra-se no desenho e construção de um Sistema de Informação capaz de gerir o negócio de uma empresa do setor alimentar, mais propriamente do setor da transformação de carnes. Foi desenvolvido em Oracle ADF, de forma a aproveitar as vantagens inerentes à tecnologia e ao desenvolvimento web. Sendo uma tecnologia relativamente nova no mercado e dominada por poucos, a sua utilização neste momento pode tornar-se uma grande vantagem. Para o desenvolvimento da aplicação foi realizado o levantamento e análise de requisitos, foi criada a base de dados capaz de suportar o funcionamento do software e desenvolvido um sistema de login, capaz de gerir as sessões de cada utilizador. Foi implementado um processo de introdução e edição de informação, nomeadamente o registo de entradas, transformações e saídas. Contemplou-se também uma secção com dados mestre da empresa com a possibilidade de inserção, atualização e/ou remoção. Além disso, foram incorporadas validações em todos os processos que são usados pelos utilizadores, de modo a evitar a existência de dados incoerentes ou duplicados. Relativamente à lógica de negócio, foi embutida na aplicação de forma a permitir consultar a informação de forma clara, rápida e em diversos lugares, reduzindo tempo e tarefas ao colaborador/utilizador, visto que os processos foram automatizados. Com a implementação deste Sistema de Informação, a empresa pode usufruir de um sistema integrado capaz de gerir e controlar todo o seu processo produtivo, reduzindo custos e desperdícios, aumentando a produtividade e eficiência.

HLT Hilotec: self-building manual for sustainable housing

The future of the construction industry will require changes at many levels. One is the ability of companies to adapt to new challenges, converting needs to opportunities and simultaneously contributing to the solving of social and environmental problems. In the coming decades we will see a change in attitude in the industry, with a strong tendency to adopt natural and recycled materials, as well as bet on green technology and social innovation oriented to emerging countries. On the other hand, emerging countries have a high demand for housing construction on a large scale, but the current techniques in the developed countries for building requires a large amount of natural resources and skilled labor. This contextualization brings sustainability problems for the construction sector in emerging countries, often with scarce natural resources and with the construction sector underdeveloped. Through a cooperative action between the construction company Mota-Engil Engineering and the University of Minho in Portugal, a construction technology was developed based on the use of Compressed Earth Blocks as part of a social concept for innovative small houses, favoring the adoption of local and natural materials and with the main premise of being dedicated to self-construction. The HiLoTec project - Development of a Sustainable Self-Construction System for Developing Countries was based on this idea. One of the several results of this project is this construction manual. To Mota-Engil the project was a platform for incubation of knowledge about earth construction and to obtain a constructive solution validated technically and scientifically, suitable to be implemented in the markets where it operates. For the University of Minho the project was an opportunity to strengthen skills in research, laboratory and scientific development, through the development of engineering studies, architecture and sustainability, as well as supporting the doctoral scholarships and dissemination of scientific publications. May the knowledge of this project be of benefit, in the future, for the welfare of those who build a HiLoTec house.

Análise de tempos e métodos e implementação de ferramentas lean num sistema produtivo

Dissertação de mestrado em Engenharia Industrial

Eina gràfica per la creació d'autòmats per a la representació del llenguatge natural

Aquest projecte tracta la implementació d’una eina gràfica multiplataforma de creació i edició de gramàtiques electròniques per representar el Llenguatge Natural. És una eina per lingüistes i projectes com Spanish FrameNet Project amb la quan poden representar fàcilment transductors en un format més visual, les transicions es representen en forma de “caixes”, i guardar els resultats. S’han implementat varies opcions per crear una eina còmode i personalitzable per l’usuari amb funcionalitats enfocades a les seves necessitats com importar/exportar autòmats des d’una Expressió Regular. Es tracta l’implementació de tots els components que s’han necessitat per crear la GUI així com la seva funcionalitat.