ESCMID* guideline for the diagnosis and management of Candida diseases 2012: non-neutropenic adult patients.

This part of the EFISG guidelines focuses on non-neutropenic adult patients. Only a few of the numerous recommendations can be summarized in the abstract. Prophylactic usage of fluconazole is supported in patients with recent abdominal surgery and recurrent gastrointestinal perforations or anastomotic leakages. Candida isolation from respiratory secretions alone should never prompt treatment. For the targeted initial treatment of candidaemia, echinocandins are strongly recommended while liposomal amphotericin B and voriconazole are supported with moderate, and fluconazole with marginal strength. Treatment duration for candidaemia should be a minimum of 14 days after the end of candidaemia, which can be determined by one blood culture per day until negativity. Switching to oral treatment after 10 days of intravenous therapy has been safe in stable patients with susceptible Candida species. In candidaemia, removal of indwelling catheters is strongly recommended. If catheters cannot be removed, lipid-based amphotericin B or echinocandins should be preferred over azoles. Transoesophageal echocardiography and fundoscopy should be performed to detect organ involvement. Native valve endocarditis requires surgery within a week, while in prosthetic valve endocarditis, earlier surgery may be beneficial. The antifungal regimen of choice is liposomal amphotericin B +/- flucytosine. In ocular candidiasis, liposomal amphotericin B +/- flucytosine is recommended when the susceptibility of the isolate is unknown, and in susceptible isolates, fluconazole and voriconazole are alternatives. Amphotericin B deoxycholate is not recommended for any indication due to severe side effects.

ESCMID* guideline for the diagnosis and management of Candida diseases 2012: patients with HIV infection or AIDS.

Mucosal candidiasis is frequent in immunocompromised HIV-infected highly active antiretroviral (HAART) naive patients or those who have failed therapy. Mucosal candidiasis is a marker of progressive immune deficiency. Because of the frequently marked and prompt immune reconstitution induced by HAART, there is no recommendation for primary antifungal prophylaxis of mucosal candidiasis in the HIV setting in Europe, although it has been evidenced as effective in the pre-HAART era. Fluconazole remains the first line of therapy for both oropharyngeal candidiasis and oesophageal candidiasis and should be preferred to itraconazole oral solution (or capsules when not available) due to fewer side effects. For patients who still present with fluconazole-refractory mucosal candidiasis, oral treatment with any other azole should be preferred based on precise Candida species identification and susceptibility testing results in addition to the optimization of HAART when feasible. For vaginal candidiasis, topical therapy is preferred.

How to interprete subclinical thyroid dysfunction in the prevention and management of heart failure events? Individual participant data analysis from six prospective cohorts

Background: Guidelines of the Diagnosis and Management of Heart Failure (HF) recommend investigating exacerbating conditions, such as thyroid dysfunction, but without specifying impact of different TSH levels. Limited prospective data exist regarding the association between subclinical thyroid dysfunction and HF events. Methods: We performed a pooled analysis of individual participant data using all available prospective cohorts with thyroid function tests and subsequent follow-up of HF events. Individual data on 25,390 participants with 216,247 person-years of follow-up were supplied from 6 prospective cohorts in the United States and Europe. Euthyroidism was defined as TSH 0.45-4.49 mIU/L, subclinical hypothyroidism as TSH 4.5-19.9 mIU/L and subclinical hyperthyroidism as TSH <0.45 mIU/L, both with normal free thyroxine levels. HF events were defined as acute HF events, hospitalization or death related to HF events. Results: Among 25,390 participants, 2068 had subclinical hypothyroidism (8.1%) and 648 subclinical hyperthyroidism (2.6%). In age- and gender-adjusted analyses, risks of HF events were increased with both higher and lower TSH levels (P for quadratic pattern<0.01): hazard ratio (HR) was 1.01 (95% confidence interval [CI] 0.81-1.26) for TSH 4.5-6.9 mIU/L, 1.65 (CI 0.84-3.23) for TSH 7.0-9.9 mIU/L, 1.86 (CI 1.27-2.72) for TSH 10.0-19.9 mIUL/L (P for trend <0.01), and was 1.31 (CI 0.88-1.95) for TSH 0.10-0.44 mIU/L and 1.94 (CI 1.01-3.72) for TSH <0.10 mIU/L (P for trend=0.047). Risks remained similar after adjustment for cardiovascular risk factors. Conclusion: Risks of HF events were increased with both higher and lower TSH levels, particularly for TSH ≥10 mIU/L and for TSH <0.10 mIU/L. Our findings might help to interpret TSH levels in the prevention and investigation of HF.

Incidence and management of pulmonary embolism following spinal surgery occurring while under chemical thromboprophylaxis.

Patients undergoing spinal surgery are at risk of developing thromboembolic complications even though lower incidences have been reported as compared to joint arthroplasty surgery. Deep vein thrombosis (DVT) has been studied extensively in the context of spinal surgery but symptomatic pulmonary embolism (PE) has engaged less attention. We prospectively followed a consecutive cohort of 270 patients undergoing spinal surgery at a single institution. From these patients, only 26 were simple discectomies, while the largest proportion (226) was fusions. All patients received both low molecular weight heparin (LMWH) initiated after surgery and compressive stockings. PE was diagnosed with spiral chest CT. Six patients developed symptomatic PE, five during their hospital stay. In three of the six patients the embolic event occurred during the first 3 postoperative days. They were managed by the temporary insertion of an inferior vena cava (IVC) filter thus allowing for a delay in full-dose anticoagulation until removal of the filter. None of the PE patients suffered any bleeding complication as a result of the introduction of full anticoagulation. Two patients suffered postoperative haematomas, without development of neurological symptoms or signs, requiring emergency evacuation. The overall incidence of PE was 2.2% rising to 2.5% after exclusion of microdiscectomy cases. The incidence of PE was highest in anterior or combined thoracolumbar/lumbar procedures (4.2%). There is a large variation in the reported incidence of PE in the spinal literature. Results from the only study found in the literature specifically monitoring PE suggest an incidence of PE as high as 2.5%. Our study shows a similar incidence despite the use of LMWH. In the absence of randomized controlled trials (RCT) it is uncertain if this type of prophylaxis lowers the incidence of PE. However, other studies show that the morbidity of LMWH is very low. Since PE can be a life-threatening complication, LMWH may be a worthwhile option to consider for prophylaxis. RCTs are necessary in assessing the efficacy of DVT and PE prophylaxis in spinal patients.

Characterization and management of rockslide hazard at Turtle Mountain, Alberta, Canada

In 1903, more than 30 million m3 of rock fell from the east slopes of Turtle Mountain in Alberta, Canada, causing a rock avalanche that killed about 70 people in the town of Frank. The Alberta Government, in response to continuing instabilities at the crest of the mountain, established a sophisticated field laboratory where state-of-the-art monitoring techniques have been installed and tested as part of an early-warning system. In this chapter, we provide an overview of the causes, trigger, and extreme mobility of the landslide. We then present new data relevant to the characterization and detection of the present-day instabilities on Turtle Mountain. Fourteen potential instabilities have been identified through field mapping and remote sensing. Lastly, we provide a detailed review of the different in-situ and remote monitoring systems that have been installed on the mountain. The implications of the new data for the future stability of Turtle Mountain and related landslide runout, and for monitoring strategies and risk management, are discussed.

Conservation and management of the Common Quail (Coturnix coturnix) in Europe: past, present and future.

En el presente estudio hacemos una revisión del estado de conservación y las tendencias poblacionales de la codorniz común (Coturnix coturnix) desde 1900 hasta nuestros días. Algunos de los datos de los que disponemos son contradictorios con respecto al estado de la especie, que presenta ciertas características que dificultan el poder proporcionar estimas poblacionales fiables. Datos recientes sugieren claramente, tanto a escala local como a escala transnacional, que las poblaciones atlánticas de codorniz común han permanecido estables en las dos últimas décadas y que la práctica de liberar codornices criadas en granjas (híbridas con la codorniz japonesa, Coturnix japonica) con finalidades cinegéticas, no afectan significativamente a nuestras estimas. Por otra parte, los complejos patrones de desplazamiento de esta especie requieren especial atención. En este sentido, el análisis de recuperaciones de anillas puede aportar información relevante, especialmente de los movimientos nomádicos de codornices a la búsqueda de hábitats adecuados, tras la destrucción de los cultivos invernales de cereales debido a la siega. Así, al desarrollar un modelo de distribución de cría para esta especie, se debe incorporar continuamente información actualizada de los cambios estacionales de hábitat y clima, con el fin de obtener unas predicciones óptimas. En este sentido, por ejemplo, la inclusión de datos quincenales de índices de vegetación en los modelos de distribución ha dado muy buenos resultados. La obtención de predicciones fiables de los cambios de la distribución de la especie y de sus desplazamientos durante la estación de cría puede ser muy útil para un mejor conocimiento del estado de conservación y las tendencias poblacionales de la especie, así como para el diseño de futuras medidas de gestión.

Prevalence and management of familial hypercholesterolaemia in patients with acute coronary syndromes.

AIMS: We aimed to assess the prevalence and management of clinical familial hypercholesterolaemia (FH) among patients with acute coronary syndrome (ACS). METHODS AND RESULTS: We studied 4778 patients with ACS from a multi-centre cohort study in Switzerland. Based on personal and familial history of premature cardiovascular disease and LDL-cholesterol levels, two validated algorithms for diagnosis of clinical FH were used: the Dutch Lipid Clinic Network algorithm to assess possible (score 3-5 points) or probable/definite FH (>5 points), and the Simon Broome Register algorithm to assess possible FH. At the time of hospitalization for ACS, 1.6% had probable/definite FH [95% confidence interval (CI) 1.3-2.0%, n = 78] and 17.8% possible FH (95% CI 16.8-18.9%, n = 852), respectively, according to the Dutch Lipid Clinic algorithm. The Simon Broome algorithm identified 5.4% (95% CI 4.8-6.1%, n = 259) patients with possible FH. Among 1451 young patients with premature ACS, the Dutch Lipid Clinic algorithm identified 70 (4.8%, 95% CI 3.8-6.1%) patients with probable/definite FH, and 684 (47.1%, 95% CI 44.6-49.7%) patients had possible FH. Excluding patients with secondary causes of dyslipidaemia such as alcohol consumption, acute renal failure, or hyperglycaemia did not change prevalence. One year after ACS, among 69 survivors with probable/definite FH and available follow-up information, 64.7% were using high-dose statins, 69.0% had decreased LDL-cholesterol from at least 50, and 4.6% had LDL-cholesterol ≤1.8 mmol/L. CONCLUSION: A phenotypic diagnosis of possible FH is common in patients hospitalized with ACS, particularly among those with premature ACS. Optimizing long-term lipid treatment of patients with FH after ACS is required.

Diagnosis and management of auditory neuropathy/dys-sychrony

This paper discusses auditory neuropathy (AN) and auditory dys-sychrony (AD), and means of testing and diagnosis.

Iron homeostasis and management of oxidative stress response in bacteria

Iron is both an essential nutrient for the growth of microorganisms, as well as a dangerous metal due to its capacity to generate reactive oxygen species (ROS) via the Fenton reaction. For these reasons, bacteria must tightly control the uptake and storage of iron in a manner that restricts the build-up of ROS. Therefore, it is not surprising to find that the control of iron homeostasis and responses to oxidative stress are coordinated. The mechanisms concerned with these processes, and the interactions involved, are the subject of this review.

Design and management of sustainable built environments

The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.

Climate and more sustainable cities: climate information for improved planning and management of cities (producers/capabilities perspective)

In the last two decades substantial advances have been made in the understanding of the scientific basis of urban climates. These are reviewed here with attention to sustainability of cities, applications that use climate information, and scientific understanding in relation to measurements and modelling. Consideration is given from street (micro) scale to neighbourhood (local) to city and region (meso) scale. Those areas where improvements are needed in the next decade to ensure more sustainable cities are identified. High-priority recommendations are made in the following six strategic areas: observations, data, understanding, modelling, tools and education. These include the need for more operational urban measurement stations and networks; for an international data archive to aid translation of research findings into design tools, along with guidelines for different climate zones and land uses; to develop methods to analyse atmospheric data measured above complex urban surfaces; to improve short-range, high-resolution numerical prediction of weather, air quality and chemical dispersion through improved modelling of the biogeophysical features of the urban land surface; to improve education about urban meteorology; and to encourage communication across scientific disciplines at a range of spatial and temporal scales.

Assessment and management of anxiety disorders in children and adolescents

Anxiety disorders in childhood and adolescence are extremely common and are often associated with lifelong psychiatric disturbance. Consistent with DSM-5 and the extant literature, this review concerns the assessment and treatment of specific phobias, separation anxiety disorder, generalised anxiety disorder, social anxiety disorder, panic disorder and agoraphobia. Evidence-based psychological treatments (cognitive behaviour therapy; CBT) for these disorders have been developed and investigated, and in recent years promising low-intensity versions of CBT interventions have been proposed that offer a means to increase access to evidence-based treatments. There is some evidence of effectiveness of pharmacological treatments for anxiety disorders in children and young people, however, routine prescription is not recommended due to concerns about potential harm.