Production and Productive Reason

This article explores two rival understandings of production and what it means to be a rational productive subject. Against ‘technicist’ models of productive reason, it defends a ‘phronetic’ model on both normative and pragmatic grounds. The discussion begins with a description of the general principles underpinning technicist theories of workplace organisation, principles which continue to inform work design approaches to this day. The technicist model is thereafter criticised on three counts: that it represents a specific managerial agenda which privileges sectional interests; that it is suspect morally for a number of reasons; and that despite its aspiration of arriving at ‘one best method’, it represents but one way of organising work processes. The phronetic model is then set out using the notion of ‘practices’ as a guide. This notion is important in providing a view of production in which technical reason is subsumed under a broader practical reason incorporating individual experience and judgement. Against the charge that this view is merely an instance of nostalgic craft romanticism having little relevance to present industrial realities, there are recognisable contemporary instances of phronetic production, one of the most interesting being Volvo’s innovations in automotive assembly systems.

Geophysical and hydrogeological characterisation of the impacts of on-site wastewater treatment discharge to groundwater in a poorly productive bedrock acquifer

Contaminants discharging from on-site wastewater treatment systems (OSWTSs) can impact groundwater quality, threatening human health and surface water ecosystems. Risk of negative impacts becomes elevated in areas of extreme vulnerability with high water tables, where thin unsaturated intervals limit vadose zone attenuation. A combined geophysical/hydrogeological investigation into the effects of an OSWTS, located over a poorly productive aquifer (PPA) with thin subsoil cover, aimed to characterise effluent impacts on groundwater. Groundwater, sampled from piezometers down-gradient of the OSWTS percolation area displayed spatially erratic, yet temporally consistent, contaminant distributions. Electrical resistivity tomography identified an area of gross groundwater contamination close to the percolation area and, when combined with seismic refraction and water quality data, indicated that infiltrating effluent reaching the water table discharged to a deeper more permeable zone of weathered shale resting on more competent bedrock. Subsurface structure, defined by geophysics, indicated that elevated chemical and microbiological contaminant levels encountered in groundwater samples collected from piezometers, down-gradient of sampling points with lower contaminant levels, corresponded to those locations where piezometers were screened close to the weathered shale/competent rock interface; those immediately up-gradient were too shallow to intercept this interval, and thus the more impacted zone of the contaminant plume. Intermittent occurrence of faecal indicator bacteria more than 100 m down gradient of the percolation area suggested relatively short travel times. Study findings highlight the utility of geophysics as part of multidisciplinary investigations for OSWTS contaminant plume characterisation, while also demonstrating the capacity of effluent discharging to PPAs to impact groundwater quality at distance. Comparable geophysical responses observed in similar settings across Ireland suggest the phenomena observed in this study are more widespread than previously suspected.

Productive Synergies in the City

The chapter focuses on the development of sustainable growing infrastructure in the city at two scales. Firstly the development of a large-scale city wide fuel productive landscape through the development of algae arrays in Liverpool and their connection through urban agriculture systems to develop a closed-cycle food and energy system where waste is food and secondly a hyper-localised neighbourhood food production system in Salford UK that utilises a closed cycle aquaponic system to re-invigorate an urban food desert.

The author develops a three-part model for the implementation of urban agriculture based on hardware (the technological system), software (the biological components) and interface (the links to food and other social networks). The conclusion being that it is possible to develop urban agriculture in cities if their implementation is seen as a process, rather than a static design. Also that as the benefits of such systems are wider than purely the physical outputs of the system in terms of energy and food, and thus we should re-evaluate the purely economic model of appraisal to include these.

Integrating petrography, mineralogy and hydrochemistry to constrain the influence and distribution of groundwater contributions to baseflow in poorly productive aquifers: Insights from Gortinlieve catchment, Co. Donegal, NW Ireland

Identifying groundwater contributions to baseflowforms an essential part of surfacewater body characterisation. The Gortinlieve catchment (5 km2) comprises a headwater stream network of the Carrigans River, itself a tributary of the River Foyle, NW Ireland. The bedrock comprises poorly productive metasediments that are characterised by fracture porosity. We present the findings of a multi-disciplinary study that integrates new hydrochemical and mineralogical investigations with existing hydraulic, geophysical and structural data to identify the scales of groundwater flow and the nature of groundwater/bedrock interaction (chemical denudation). At the catchment scale, the development of deep weathering profiles is controlled by NE-SW regional scale fracture zones associated with mountain building during the Grampian orogeny. In-situ chemical denudation of mineral phases is controlled by micro- to meso-scale fractures related to Alpine compression during Palaeocene to Oligocene times. The alteration of primary muscovite, chlorite (clinochlore) and albite along the surfaces of these small-scale fractures has resulted in the precipitation of illite, montmorillonite and illite/montmorillonite clay admixtures. The interconnected but discontinuous nature of these small-scale structures highlights the role of larger scale faults and fissures in the supply and transportation of weathering solutions to/from the sites of mineral weathering. The dissolution of primarily mineral phases releases the major ions Mg, Ca and HCO3 that are shown to subsequently formthe chemical makeup of groundwaters. Borehole groundwater and stream baseflow hydrochemical data are used to constrain the depths of groundwater flow pathways influencing the chemistry of surface waters throughout the stream profile. The results show that it is predominantly the lower part of the catchment, which receives inputs from catchment/regional scale groundwater flow, that is found to contribute to the maintenance of annual baseflow levels. This study identifies the importance
of deep groundwater in maintaining annual baseflow levels in poorly productive bedrock systems.

Increased Exposure to Rigid Routines can Lead to Increased Challenging Behavior Following Changes to Those Routines

Several neurodevelopmental disorders are associated with preference for routine and challenging behavior following changes to routines. We examine individuals with Prader–Willi syndrome, who show elevated levels of this behavior, to better understand how previous experience of a routine can affect challenging behavior elicited by disruption to that routine. Play based challenges exposed 16 participants to routines, which were either adhered to or changed. Temper outburst behaviors, heart rate and movement were measured. As participants were exposed to routines for longer before a change (between 10 and 80 min; within participants), more temper outburst behaviors were elicited by changes. Increased emotional arousal was also elicited, which was indexed by heart rate increases not driven by movement. Further study will be important to understand whether current intervention approaches that limit exposure to changes, may benefit from the structured integration of flexibility to ensure that the opportunity for routine establishment is also limited.

Abundance and diversity of sedimentary bacterial communities in a coastal productive setting in the Western Irish Sea

The bacterial community composition and biomass abundance from a depositional mud belt in the western Irish Sea and regional sands were investigated by phospholipid ester-linked fatty acid profiling, denaturing gradient gel electrophoresis and barcoded pyrosequencing of 16S rRNA genes. The study area varied by water depth (12-111 m), organic carbon content (0.09-1.57% TOC), grain size, hydrographic regime (well-mixed vs. stratified), and water column phytodetrital input (represented by algal polyunsaturated PLFA). The relative abundance of bacterial-derived PLFA (sum of methyl-branched, cyclopropyl and odd-carbon number PLFA) was positively correlated with fine-grained sediment, and was highest in the depositional mud belt. A strong association between bacterial biomass and eukaryote primary production was suggested based on observed positive correlations with total nitrogen and algal polyunsaturated fatty acids. In addition, 16S rRNA genes affiliated to the classes Clostridia and Flavobacteria represented a major proportion of total 16S rRNA gene sequences. This suggests that benthic bacterial communities are also important degraders of phytodetrital organic matter and closely coupled to water column productivity in the western Irish Sea.

Productive Knowledge of English Binomials by Japanese Learners of English

The purpose of this research is to reveal (1) which English binomials Japanese learners of English have productive knowledge of and (2) what strategies they use to produce English binomials when they do not know the binomials. One hundred and three Japanese learners of English with intermediate proficiency level completed an online survey of 44 binomials. The participants were given the first word of a binomial and asked to type a word following “and”. The target word was provided by more than 75% of participants for 19 of the 44 binomials, meaning that learners have productive knowledge for certain binomials. An analysis of errors suggested that the participants relied heavily on semantic relationships between items in binomials.However, the use of a semantic strategy for producing the second words often leads to non-binomial expressions. From these results we suggest that giving more input to learners, as well as teaching the “Me first” principle (Cooper & Ross, 1975) explicitly would help the learners to develop more accurate and effective strategies for uncertain or unfamiliar binomials.

Manutenção produtiva total: implementação na Simoldes Plásticos, SA

O presente trabalho descreve um projeto de implementação da metodologia de Manutenção Produtiva Total (TPM) desenvolvido na Simoldes Plásticos, unidade industrial de injeção de plásticos que opera no setor automóvel. A metodologia TPM salienta o papel fundamental que o trabalho em equipa e, em particular, a participação do pessoal, podem desempenhar na identificação de oportunidades de melhoria e na sua implementação. A sua aplicação visa a diminuição dos desperdícios, acidentes, defeitos, paragens e falhas ao longo de um processo produtivo. De uma forma geral, a TPM utiliza uma ideia base elementar que passa pela sensibilização, formação e treino dos operadores para que estes consigam realizar a manutenção autónoma dos equipamentos e melhorar continuamente o seu desempenho. Este trabalho apresenta em primeiro lugar uma revisão dos conceitos de Gestão da Qualidade Total, particularmente da Melhoria Contínua e da Metodologia TPM. De seguida, é descrita a aplicação da TPM na empresa Simoldes Plásticos, que inclui uma descrição dos principais problemas encontrados e das medidas aplicadas para a sua correção. Finalmente é feita uma análise do impacto das melhorias implementadas, a partir da análise de um indicador de eficiência específico, desenvolvido na empresa - o RUTPM - Rendimento de Utilização TPM.

Factores de rentabilização do processo de serragem de granitos com engenhos multi-lâminas

Este trabalho visa apresentar um enquadramento da realidade económica e industrial do sector transformador de granitos ornamentais em Portugal e fazer uma análise do processo de serragem, com engenhos multi-lâminas e granalha de aço, na medida em que este é o método de seccionamento de blocos de granito mais utilizado pelas grandes indústrias do sector. Tendo em conta a importância económica desta operação produtiva na indústria em causa, foi definido como fito deste projecto a análise estatística dos custos de produção; a definição de fórmulas de cálculo que permitam prever o custo médio de serragem; e o estudo de soluções economicamente viáveis e ambientalmente sustentáveis para o problema das lamas resultantes do expurgo dos engenhos. Para a persecução deste projecto foi realizada uma recolha de dados implementando rotinas de controlo e registo dos mesmos, em quadros de produção normalizados e de fácil preenchimento, pelos operadores destes equipamentos. Esta recolha de dados permitiu isolar, quantificar e formular os factores de rentabilização do processo de serragem selecionando, dentro da amostra de estudo obtida, um conjunto de serragens com características similares e com valores próximos dos valores da média estatística. Apartir dos dados destas serragens foram geradas curvas de tendência polinomial com as quais se analisaram as variações provocadas no custo médio de serragem, pelas variações do factor em estudo. A formulação dos factores de rentabilização e os dados estatísticos obtidos permitiram depois o desenvolvimento de fórmulas de cálculo do custo médio de serragem que establecem o custo de produção diferenciado em função das espessuras com, ou sem, a incorporação dos factores de rentabilização. Como consequência do projecto realizado obteve-se um conjunto de conclusões util, para o sector industrial em causa, que evidencia a importancia da Ocupação dos engenhos e rentabilização de um espaço confinado, da Resistência oferecida à serragem pelos granitos, e da Diferença de altura entre os blocos de uma mesma carga, nos custos de transformação.

Efficient schedulability tests for real-time embedded systems with urgent routines

Task scheduling is one of the key mechanisms to ensure timeliness in embedded real-time systems. Such systems have often the need to execute not only application tasks but also some urgent routines (e.g. error-detection actions, consistency checkers, interrupt handlers) with minimum latency. Although fixed-priority schedulers such as Rate-Monotonic (RM) are in line with this need, they usually make a low processor utilization available to the system. Moreover, this availability usually decreases with the number of considered tasks. If dynamic-priority schedulers such as Earliest Deadline First (EDF) are applied instead, high system utilization can be guaranteed but the minimum latency for executing urgent routines may not be ensured. In this paper we describe a scheduling model according to which urgent routines are executed at the highest priority level and all other system tasks are scheduled by EDF. We show that the guaranteed processor utilization for the assumed scheduling model is at least as high as the one provided by RM for two tasks, namely 2(2√−1). Seven polynomial time tests for checking the system timeliness are derived and proved correct. The proposed tests are compared against each other and to an exact but exponential running time test.

Gestão de projetos audiovisuais: a experiência na RTP

Relatório de estágio apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Audiovisual e Multimédia.