Laskentamenetelmissä tehtävien valintojen merkitys alueellisen lämmön- ja sähköntuotannon kasvihuonekaasupäästöjen kannalta

Tämän diplomityön tarkoituksena on selvittää alueellisen lämmön- ja sähköntuotannon laskentamenetelmävalintojen vaikutuksia kasvihuonekaasupäästöihin. Työn tutkimuskysymyksenä on, onko mahdollista, että laskentamenetelmän valinnalla on suurempi vaikutus alueen kasvihuonekaasupäästöihin kuin energiantuotantotekniikan valinnalla. Laskentamenetelmävalinnoista tutkitaan tarkemmin CHP-laitoksen päästöjen allokointitavan ja sähkönpäästöjen määrittämisen vaikutuksia kasvihuonekaasupäästöihin. Tutkimusmenetelminä työssä on käytetty kirjallisuuskatsausta sekä tapaustutkimusta. Kirjallisuuskatsauksen aineistona käytetään tieteellisiä artikkeleita ja tutkimusraportteja. Tapaustutkimuksessa tutkitaan yksittäistä case-kohdetta, joka on Tampereen Härmälänrannan uudisrakennusalue, ja jossa vertaillaan maalämpöpumppua ja kaukolämpöä alueen lämmitysratkaisuina. Työn tuloksena todetaan, että on olemassa sellaisia tilanteita, joissa laskentamenetelmän valinnalla on suurempi vaikutus alueen kasvihuonekaasupäästöihin kuin energiantuotantotekniikan valinnalla. Lisäksi case-tarkastelun perusteella huomataan, että laskentamenetelmävalinnoilla on sitä suurempi merkitys, mitä enemmän CHP-laitoksessa käytetään uusiutuvaa polttoainetta. Työn johtopäätöksenä voidaan todeta, että energiantuotannon kasvihuonekaasupäästölaskennassa on syytä ymmärtää ja huomioida eri laskentamenetelmävalintojen vaikutus esitettyihin tuloksiin.

Acceptance of a food of animal origin obtained through genetic modification and cloning in South America: a comparative study among university students and working adults

AbstractWith the aim of comparing the acceptance of milk obtained from cloned, genetically modified (GM) and conventionally bred cows among working adults and university students, and identifying and characterizing typologies among both subsamples in terms of their preferences, a survey was applied to 400 people in southern Chile, distributed using a simple allocation among the subsamples. Using a conjoint analysis, it was found that consumers preferred milk from a conventional cow. Using a cluster analysis, in both subsamples two segments sensitive to production technology were identified. Rejection of cloning was greatest among university students, whereas a higher proportion of working adults rejected GM. The segments differed in terms of area of residence, knowledge about GM, and milk consumption habits. Contrary to what was expected, no differences were found according to education, gender or degree of satisfaction with food-related life.

The Transmission of Monetary Policy in a Multi-Sector Economy

This paper constructs and estimates a sticky-price, Dynamic Stochastic General Equilibrium model with heterogenous production sectors. Sectors differ in price stickiness, capital-adjustment costs and production technology, and use output from each other as material and investment inputs following an Input-Output Matrix and Capital Flow Table that represent the U.S. economy. By relaxing the standard assumption of symmetry, this model allows different sectoral dynamics in response to monetary policy shocks. The model is estimated by Simulated Method of Moments using sectoral and aggregate U.S. time series. Results indicate 1) substantial heterogeneity in price stickiness across sectors, with quantitatively larger differences between services and goods than previously found in micro studies that focus on final goods alone, 2) a strong sensitivity to monetary policy shocks on the part of construction and durable manufacturing, and 3) similar quantitative predictions at the aggregate level by the multi-sector model and a standard model that assumes symmetry across sectors.

Les logiques de localisation des entreprises multinationales au Québec : une analyse des systèmes d'affaires et des relations industrielles en région

L’objet de ce mémoire est de comprendre les logiques de localisation des entreprises multinationales au Québec. À l’aide de deux études de cas, basées sur cinq investissements, nous avons examiné les facteurs qui ont permis à deux filiales d’entreprises multinationales étrangères d’obtenir un investissement ou un réinvestissement. La littérature sur la localisation des entreprises multinationales à l’étranger nous a aidé à identifier trois types d’attributs qui sont susceptibles d’influencer l‘obtention d’un investissement par la filiale locale : les attributs internes à la filiale, les attributs liés à la relation qu’entretient la filiale avec son siège social et les attributs liés aux contextes d’affaires dans lesquels la filiale exerce son activité. Nos résultats permettent d’établir plusieurs constats. Premièrement, les facteurs pris en compte dans les décisions d’investissement varient selon les échelles internationales, nationales, provinciales et locales. Les sièges sociaux des entreprises multinationales procèdent à une sélection successive de facteurs dans la perspective d’arriver à un meilleur compromis. Par conséquent, un facteur ne peut à lui seul expliquer un investissement. Le poids et la diversité des facteurs peuvent varier en fonction des situations. Deuxièmement, la complémentarité des attributs internes de la filiale avec son contexte d’affaires local a fortement contribué à l’obtention d’investissements. La technologie de production, les compétences des employés ainsi que la capacité de la direction locale à promouvoir les atouts de la filiale auprès des comités d’investissement représentent des éléments clés. La présence d’institutions locales fortes et coordonnées est également à prendre en compte dans le soutien apporté au développement de la filiale.

Spray Pyrolysed Tin Chalcogenide Thin Films: Optimization of optoelectronic properties of SnS for possible photovoltaic application as an absorber layer

In the early 19th century, industrial revolution was fuelled mainly by the development of machine based manufacturing and the increased use of coal. Later on, the focal point shifted to oil, thanks to the mass-production technology, ease of transport/storage and also the (less) environmental issues in comparison with the coal!! By the dawn of 21st century, due to the depletion of oil reserves and pollution resulting from heavy usage of oil the demand for clean energy was on the rising edge. This ever growing demand has propelled research on photovoltaics which has emerged successful and is currently being looked up to as the only solace for meeting our present day energy requirements. The proven PV technology on commercial scale is based on silicon but the recent boom in the demand for photovoltaic modules has in turn created a shortage in supply of silicon. Also the technology is still not accessible to common man. This has onset the research and development work on moderately efficient, eco-friendly and low cost photovoltaic devices (solar cells). Thin film photovoltaic modules have made a breakthrough entry in the PV market on these grounds. Thin films have the potential to revolutionize the present cost structure of solar cells by eliminating the use of the expensive silicon wafers that alone accounts for above 50% of total module manufacturing cost.Well developed thin film photovoltaic technologies are based on amorphous silicon, CdTe and CuInSe2. However the cell fabrication process using amorphous silicon requires handling of very toxic gases (like phosphene, silane and borane) and costly technologies for cell fabrication. In the case of other materials too, there are difficulties like maintaining stoichiometry (especially in large area films), alleged environmental hazards and high cost of indium. Hence there is an urgent need for the development of materials that are easy to prepare, eco-friendly and available in abundance. The work presented in this thesis is an attempt towards the development of a cost-effective, eco-friendly material for thin film solar cells using simple economically viable technique. Sn-based window and absorber layers deposited using Chemical Spray Pyrolysis (CSP) technique have been chosen for the purpose

Industria y concentración de cultivos: la contribución de la industria del frío en la fruticultura leridana

Para avanzar en el estudio de la concentración espacial de cultivos, se ha elegido el caso de la manzana, la pera y el melocotón en Lleida, desde 1962 a 2000. La evolución de ese fenómeno se ha estudiado mediante técnicas de equilibrio espacial y análisis shift share, encontrándose una pauta espacial de comportamiento distinta entre la manzana y la pera por una parte y el melocotón por otro. En el caso de las técnicas shift share se ha modelado el efecto diferencial como el resultado de un juego de suma nula, y suponiendo que las transferencias de efectos son más probables hacia las regiones más cercanas, se ha avanzado una explicación de las transferencias de superficie que se produjeron entre 1962 y 2000. La diferencia encontrada en el distinto comportamiento espacial de esos cultivos se ha atribuido a la susceptibilidad de cada cultivo para ser conservado frigoríficamente. Se ha desarrollado un modelo que relaciona los incrementos de la capacidad en la industria frigorífica y de la superficie.

Regulatory reform and productivity change in Indian banking

This paper examines the impact of regulatory reform on productivity growth and its components for Indian banks in 1992-2009. We estimate parametric and non-parametric efficiency frontiers, followed by Divisia and Malmquist indexes of Total Factor Productivity respectively. To account for technology heterogeneity among ownership types we utilise a metafrontier approach. Results are consistent across methodologies and show sustained productivity growth, driven mainly by technological progress. Furthermore, results indicate that different ownership types react differently to changes in the operating environment. The position of foreign banks becomes increasingly dominant and their production technology becomes the best practice in the industry.

Effect of impurities in biodiesel-derived waste glycerol on the performance and feasibility of biotechnological processes

The rapid development of biodiesel production technology has led to the generation of tremendous quantities of glycerol wastes, as the main by-product of the process. Stoichiometrically, it has been calculated that for every 100 kg of biodiesel, 10 kg of glycerol are produced. Based on the technology imposed by various biodiesel plants, glycerol wastes may contain numerous kinds of impurities such as methanol, salts, soaps, heavy metals and residual fatty acids. This fact often renders biodiesel-derived glycerol unprofitable for further purification. Therefore, the utilization of crude glycerol though biotechnological means represents a promising alternative for the effective management of this industrial waste. This review summarizes the effect of various impurities-contaminants that are found in biodiesel-derived crude glycerol upon its conversion by microbial strains in biotechnological processes. Insights are given concerning the technologies that are currently applied in biodiesel production, with emphasis to the impurities that are added in the composition of crude glycerol, through each step of the production process. Moreover, extensive discussion is made in relation with the impact of the nature of impurities upon the performances of prokaryotic and eukaryotic microorganisms, during crude glycerol bioconversions into a variety of high added-value metabolic products. Finally, aspects concerning ways of crude glycerol treatment for the removal of inhibitory contaminants as reported in the literature are given and comprehensively discussed

The implications of embodiment and Putty-Clay to economic development

In this paper we construct and analyze a growth model with the following three ingredients. (i) Technological progress is embodied. (ii) The production function of a firm is such that the firm makes both technology upgrade as well as capital and labor decisions. (iii) The firm’s production technology is putty-clay. We assume that there are disincentives to the accumulation of capital, resulting in a divergence between the social and the private cost of investment. We solve a single firm’s problem in this environment. Then we determine general equilibrium prices of capital goods of different vintages. Using these prices we aggregate firms’ decisions and construct the theoretical analogues of National Income statistics. This generates a relationship between disincentives and per capita incomes. We analyze this relationship and show the quantitative and qualitative roles of embodiment and putty-clay. We also show how the model is taken to data, quantified and used to determine to what extent income gaps across countries can be attributed to disincentives.

Produção de acetato de etila em biorrefinaria: uma análise de viabilidade

O estudo aqui apresentado tem como objetivo mostrar que a competitividade da indústria química brasileira pode ser revista por meio do desenvolvimento da área química a partir dos recursos naturais renováveis e de alto desempenho de produtividade, aqui representado pela cana-de-açúcar. A base deste estudo analisa a competitividade econômica da produção do acetato de etila, utilizando o etanol como única matéria-prima, sendo o Brasil um grande exportador e, ao mesmo tempo, detentor de um mercado interno forte quando comparado a outros países desenvolvidos. O acetato de etila exportado representou 52% da capacidade nominal instalada no Brasil no ano de 2008. No Brasil existem três ofertantes, mas apenas um produtor é exportador. Todos usam a esterificação como tecnologia de produção, via reação do ácido acético e etanol, sendo o ácido acético largamente importado. O estudo tem como premissa que a competitividade do acetato de etila no Brasil seja dada pelo etanol, que aqui é produzido pela fermentação do caldo de cana-de-açúcar. Já a tecnologia de esterificação é conhecida e de domínio público mundial, e o ácido acético é uma commodity petroquímica com preço referenciado globalmente. Argumenta-se neste trabalho que a competitividade do acetato de etila decorre da linkage com a produção de etanol de cana-de-açúcar, o que coloca o Brasil como grande potencial exportador desse produto. Utilizando a tecnologia de desidrogenação do etanol, pode-se obter acetato de etila utilizando-se apenas o etanol como matéria-prima, reduzindo-se assim a necessidade de importação de ácido acético, que representaria redução anual do déficit da balança comercial petroquímica brasileira em aproximadamente meio bilhão de dólares e, ademais, permitindo que o acetato de etila produzido no Brasil seja ainda mais competitivo. A partir deste estudo é possível avaliar, por analogia, a competitividade de outros produtos químicos produzidos a partir da matriz cana-de-açúcar, tais como eteno, lubrificantes, plásticos etc. Tal caminho permite criar um novo marco para a indústria química brasileira, com consequente redução da dependência de petróleo e gás natural.

Inflation and occupational choices

This paper studies the impact of (high rates) of infiation on ocupational choices in a model where the demand for labor is derived from a production technology that uses capital, productive labor, and managerial services done by administrative labor and money; while the supply of both kinds of labor is rigid in the short-run due to irreversible professional choices. The dynamic path of the economy after stabilization plans exhibits the main sty!ized facts reported in the literature inc1uding an initial consumption boon followed by a gradual adjustment. In its open economy version, the initial phase of the transitional dynamics exhibits capital infiight. The model also generates an increase of income inequality during the trasitional dynamics.

Avanços na fruticultura tropical no Brasil

Os principais aspectos que marcaram a evolução técnica das culturas do abacaxizeiro, mamoeiro e maracujazeiro no Brasil foram discutidos. em abacaxizeiro, tem-se constatado uma inovação no sistema de comercialização da cv. Smooth Cayenne, que consiste no uso de caixas de papelão ondulado para o mercado interno, cujo objetivo é propiciar uma garantia de sabor inserida em uma marca. O recente lançamento de cultivares resistentes à fusariose, pela Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) (Imperial e Vitória) e IAC (Fantástico), traz novas perspectivas de produtividade. em maracujazeiro, a maior contribuição aos pomares foi dada pelo melhoramento genético, inicialmente voltado apenas para ampliação da produtividade da cultura. No início dos anos 2000, o lançamento das primeiras cultivares de maracujá - mais produtivas e com qualidade de fruta diferenciada para os dois segmentos de mercado (frutas frescas e agroindústria), transformou o cenário produtivo brasileiro. Com a criação de um sistema organizado de produção e comercialização de sementes e mudas selecionadas, ampliou-se significativamente a qualidade dos pomares. Atualmente, a disponibilidade de novas cultivares tolerantes à virose (VEFM) e cultivares regionais passou a representar um diferencial para a cultura. em mamoeiro, destaca-se a ocorrência do Mosaico do Mamoeiro (Monte Alto-SP, 1967), que determinou a migração da cultura pelo Estado e sua expulsão para outros estados, até sua fixação na Bahia e no Espírito Santo, os maiores produtores nacionais. Comparam-se as técnicas utilizadas nos diferentes períodos de produção, antes e depois do surgimento do mosaico, que permitiram ao Brasil lançar-se no mercado externo, tornando-se o maior exportador mundial de mamão, com lavouras produtivas e frutos de ótima qualidade. Nesta evolução, soma-se a contribuição do melhoramento genético, que disponibilizou sementes de alta qualidade, com reflexos nas práticas culturais e de propagação. São apresentadas de colheita e de pós-colheita diferenciadas que resultaram em melhorias no padrão de qualidade das frutas exportadas para o mercado europeu e norte-americano.

Bioethanol - Brazil, 30 years of Proálcool

Brazil, which has always been in the forefront of sugarcane production, also occupies a prominent position as the first country to produce and use biofuel in its automobile fleet. This fact is a consequence of the introduction of a program which has already turned 30 years, the Próalcool (National Alcohol Program). The oil crisis in the seventies encouraged the government to develop an alternative way to replace gasoline. Bioethanol was then born as fuel obtained from fermentation of sugarcane juice, molasses or both. In the eighties, 85% of the cars ran exclusively on alcohol. Ethanol production in that decade exceeded sugarcane production by the mills. The installed units reached in that period the capacity to produce 18 billion liters of bioethanol per season, a volume equivalent to 100 million barrels of gasoline. The fermentation process, which so far had been restricted to manufacturing sugarcane liquor (aguardente) or ethanol as a byproduct of sugarcane, takes over the spotlight in the entrepreneurial scene. As a result, processes comprising engineering concepts came up and most of the biological phenomena involved in fermentation were understood. The knowledge gathered and the units installed have granted Brazil the hold of production technology and use of a clean fuel.

When less is better: Insights from the product mix dilemma from the Theory of Constraints perspective

Perhaps due to its origins in a production scheduling software called Optimised Production Technology (OPT), plus the idea of focusing on system constraints, many believe that the Theory of Constraints (TOC) has a vocation for optimal solutions. Those who assess TOC according to this perspective indicate that it guarantees an optimal solution only in certain circumstances. In opposition to this view and founded on a numeric example of a production mix problem, this paper shows, by means of TOC assumptions, why the TOC should not be compared to methods intended to seek optimal or the best solutions, but rather sufficiently good solutions, possible in non-deterministic environments. Moreover, we extend the range of relevant literature on product mix decision by introducing a heuristic based on the uniquely identified work that aims at achieving feasible solutions according to the TOC point of view. The heuristic proposed is tested on 100 production mix problems and the results are compared with the responses obtained with the use of Integer Linear Programming. The results show that the heuristic gives good results on average, but performance falls sharply in some situations. © 2013 Copyright Taylor and Francis Group, LLC.

Avaliação técnica e socioeconômica da cultura da uva para mesa em pequenas propriedades rurais da Regional de Jales (SP)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)