Limitations and improvements to the risk assessment process in Olive Oil Mills: the views of OSH practitioners

Although most of the accidents occurred in Olive Oil Mill (OOM) resulted from “basic” risks, there is a need to apply adequate tools to support risk decisions that can meet the specificities of this sector. This study aims to analyse the views of Occupational, Safety & Health (OSH) practitioners about the risk assessment process in OOM, identifying the key difficulties inherent to the risk assessment process in these sector, as well as identifying some improvements to the current practice. This analysis was based on a questionnaire that was developed and applied to 13 OSH practitioners working at OOM. The results showed that the time available to perform the risk assessment is the more frequent limitation. They believe that the methodologies available are not an important limitation to this process. However, a specific risk assessment methodology, that includes acceptance criteria adjusted to the OOM reality, using risk metrics supported on the frequency of accidents and workdays lost, were indicated as being also an important contributions improve the process. A semi-quantitative approach, complemented with the use of the sector accident statistics, can be a good solution for this sector. However, further strategies should also be adopted, mainly those that can lead to an easy application of the risk assessment process.

“Safety and health” as a criterion in the choice of tunneling method

Risk management is of paramount importance in the success of tunnelling works and is linked to the tunnelling method and to the constraints of the works. Sequencial Excavation Method (SEM) and Tun-nel Boring Machine (TBM) method have been competing for years. This article, part of a wider study on the influence of the â Safety and Healthâ criterion in the choice of method, reviews the existing literature about the criteria usually employed to choose the tunnelling method and on the criterion â Safety and Healthâ . This crite-rion is particularly important, due to the financial impacts of work accidents and occupational diseases. This article is especially useful to the scientific and technical community, since it synthesizes the relevance of each one of the choice criteria used and it shows why â Safety and Healthâ must be a criterion in the decision mak-ing process to choose the tunnelling method.

IPH response to the Environmental Protection Agency Consultation on Stategic Environmental Assessment (SEA) Process Checklist

The Institute of Public Health in Ireland is an all-island body which aims to improve health in Ireland by working to combat health inequalities and influence public policies in favour of health. The Institute promotes co-operation in research, training, information and policy in order to contribute to policies which tackle inequalities in health. Over the past six years the Institute has worked closely with the Department of Health and Children and the Department of Health, Social Services and Public Safety in Northern Ireland to build capacity for Health Impact Assessment. The Institute takes the view that health is determined by policies, plans and programmes in many sectors outside the health sector as well as being dependent on access to and availability of first class health services. The importance of other sectors is encapsulated in a social determinants of health perspective which recognises that health is largely shaped and influenced by the physical, social, economic and cultural environments in which people live, work and play. Figure 1 illustrates these multi-dimensional impacts on health and also serves to highlight the clear and inextricable links between health and sustainable development. Factors that impact on long-term sustainability will thus also impact on health.

Building a Culture of Patient Safety - Report of the Commission on Patient Safety and Quality Assurance

The Commission on Patient Safety and Quality Assurance was established in January 2007 and reported to the Minister in July 2008. The report was considered by government in January 2009 which agreed the implementation process. The overall objective of the Commission was to develop clear and practical recommendations to ensure that safety and quality of care for patients is paramount within the healthcare system. The Commission’s report set out a wide range of policy measures that will drive the safety and quality agenda in Irish healthcare in the coming years. The establishment of the Commission was prompted by an increasing awareness of patient safety issues in general and high profile health service system failures at home and abroad and in particular by the Lourdes Hospital Inquiry. These have underlined the need for an increased focus on patient safety and quality. Download document here Download summary document on the Report

Randomised controlled study in the primary healthcare sector to investigate the effectiveness and safety of auriculotherapy for the treatment of uncomplicated chronic rachialgia: a study protocol.

BACKGROUND Uncomplicated chronic rachialgia is a highly prevalent complaint, and one for which therapeutic results are contradictory. The aim of the present study is to evaluate the effectiveness and safety of treatment with auriculopressure, in the primary healthcare sector, carried out by trained healthcare professionals via a 30-hour course. METHODS/DESIGN The design consists of a multi-centre randomized controlled trial, with placebo, with two parallel groups, and including an economic evaluation. Patients with chronic uncomplicated rachialgia, whose GP is considering referral for auriculopressure sensory stimulation, are eligible for inclusion. Sampling will be by consecutive selection, and randomised allocation to one of the two study arms will be determined using a centralised method, following a 1:1 plan (true auriculopressure; placebo auriculopressure). The implants (true and placebo) will be replaced once weekly, and the treatment will have a duration of 8 weeks. The primary outcome measure will be the change in pain intensity, measured on a visual analogue scale (VAS) of 100 mm, at 9 weeks after beginning the treatment. A follow up study will be performed at 6 months after beginning treatment. An assessment will also be made of the changes measured in the Spanish version of the McGill Pain Questionnaire, of the changes in the Lattinen test, and of the changes in quality of life (SF-12). Also planned is an analysis of cost-effectiveness and also, if necessary, a cost-benefit analysis. DISCUSSION This study will contribute to developing evidence on the use of auriculotherapy using Semen vaccariae [wang bu liu xing] for the treatment of uncomplicated chronic rachialgia. TRIAL REGISTRATION Current Controlled Trials ISRCTN01897462.

Efficacy and safety of acupuncture for the treatment of non-specific acute low back pain: a randomised controlled multicentre trial protocol [ISRCTN65814467]

BACKGROUND Low back pain and its associated incapacitating effects constitute an important healthcare and socioeconomic problem, as well as being one of the main causes of disability among adults of working age. The prevalence of non-specific low back pain is very high among the general population, and 60-70% of adults are believed to have suffered this problem at some time. Nevertheless, few randomised clinical trials have been made of the efficacy and efficiency of acupuncture with respect to acute low back pain. The present study is intended to assess the efficacy of acupuncture for acute low back pain in terms of the improvement reported on the Roland Morris Questionnaire (RMQ) on low back pain incapacity, to estimate the specific and non-specific effects produced by the technique, and to carry out a cost-effectiveness analysis. METHODS/DESIGN Randomised four-branch controlled multicentre prospective study made to compare semi-standardised real acupuncture, sham acupuncture (acupuncture at non-specific points), placebo acupuncture and conventional treatment. The patients are blinded to the real, sham and placebo acupuncture treatments. Patients in the sample present symptoms of non specific acute low back pain, with a case history of 2 weeks or less, and will be selected from working-age patients, whether in paid employment or not, referred by General Practitioners from Primary Healthcare Clinics to the four clinics participating in this study. In order to assess the primary and secondary result measures, the patients will be requested to fill in a questionnaire before the randomisation and again at 3, 12 and 48 weeks after starting the treatment. The primary result measure will be the clinical relevant improvement (CRI) at 3 weeks after randomisation. We define CRI as a reduction of 35% or more in the RMQ results. DISCUSSION This study is intended to obtain further evidence on the effectiveness of acupuncture on acute low back pain and to isolate the specific and non-specific effects of the treatment.

Adaptation au codage CIM-10 de 15 indicateurs de la sécurité des patients proposés par l'Agence étasunienne pour la recherche et la qualité des soins de santé (AHRQ) [ICD-10 adaptation of 15 Agency for Healthcare Research and Quality patient safety indicators].

BACKGROUND: In the United States, the Agency for Healthcare Research and Quality (AHRQ) has developed 20 Patient Safety Indicators (PSIs) to measure the occurrence of hospital adverse events from medico-administrative data coded according to the ninth revision of the international classification of disease (ICD-9-CM). The adaptation of these PSIs to the WHO version of ICD-10 was carried out by an international consortium. METHODS: Two independent teams transcoded ICD-9-CM diagnosis codes proposed by the AHRQ into ICD-10-WHO. Using a Delphi process, experts from six countries evaluated each code independently, stating whether it was "included", "excluded" or "uncertain". During a two-day meeting, the experts then discussed the codes that had not obtained a consensus, and the additional codes proposed. RESULTS: Fifteen PSIs were adapted. Among the 2569 proposed diagnosis codes, 1775 were unanimously adopted straightaway. The 794 remaining codes and 2541 additional codes were discussed. Three documents were prepared: (1) a list of ICD-10-WHO codes for the 15 adapted PSIs; (2) recommendations to the AHRQ for the improvement of the nosological frame and the coding of PSI with ICD-9-CM; (3) recommendations to the WHO to improve ICD-10. CONCLUSIONS: This work allows international comparisons of PSIs among the countries using ICD-10. Nevertheless, these PSIs must still be evaluated further before being broadly used.

Food security, food safety and small farmers

Some of the elements that characterize the globalization of food and agriculture are industrialization and intensification of agriculture and liberalization of agricultural markets, that favours elongation of the food chain and homogenization of food habits (nutrition transition), among other impacts. As a result, the probability of food contamination has increased with the distance and the number of “hands" that may contact the food (critical points); the nutritional quality of food has been reduced because of increased transport and longer periods of time from collection to consumption; and the number of food-related diseases due to changes in eating patterns has increased. In this context, there exist different agencies and regulations intended to ensure food safety at different levels, e.g. at the international level, Codex Alimentarius develops standards and regulations for the marketing of food in a global market. Although governments determine the legal framework, the food industry manages the safety of their products, and thus, develops its own standards for their marketing, such as the Good Agricultural Practices (GAP) programs. The participation of the private sector in the creation of regulatory standards strengthens the free trade of food products, favouring mostly large agribusiness companies. These standards are in most cases unattainable for small producers and food safety regulations are favouring removal of the peasantry and increase concentration and control in the food system by industrial actors. Particularly women, who traditionally have been in charge of the artisanal transformation process, can be more affected by these norms than men. In this project I am analysing the impcact of food safety norms over small farms, based on the case of artisanal production made by women in Spain.

The hospital pharmacist: an important contributor to improved patient safety in the hospital.

Injectable drugs are high-risk products and their reconstitution in hospital wards is a potential source of errors. Thus, in order to secure the reconstitution process and thereby improve safety, the pharmacy department of Lausanne University Hospital is focusing on developing ready-to-use forms (CIVAS). These preparations are compounded in controlled clean rooms and are analyzed prior to release. In the intensive care unit, amiodarone 12.5 mg/mL in glucose 5% is one of the high-risk preparations, which has led the pharmacy to develop a ready-to-use solution. To this end, a one-year stability study was initiated, and the preliminary results (after six months) are illustrated here. A stability-indicating HPLC method was developed and validated for monitoring the concentration of amiodarone. Batches were stored at 5 °C and 30 °C, which were analyzed immediately after preparation, after one, two, four and six months of storage. The pH and osmolality values were monitored at the respective time intervals. It was observed that after six months, all the results were within specifications. However, the pH values started to decrease after two months when amiodarone was stored at 30 °C. After six months, a degradation peak appeared on the chromatogram of these solutions, which suggested that amiodarone is more stable at 5 °C. The preliminary results obtained in this study indicated that injectable amiodarone solutions are stable for six months under refrigerated storage conditions. The study is ongoing.

Warning systems in a computerized nursing process for Intensive Care Units

A hybrid study combining technological production and methodological research aiming to establish associations between the data and information that are part of a Computerized Nursing Process according to the ICNP® Version 1.0, indicators of patient safety and quality of care. Based on the guidelines of the Agency for Healthcare Research and Quality and the American Association of Critical Care Nurses for the expansion of warning systems, five warning systems were developed: potential for iatrogenic pneumothorax, potential for care-related infections, potential for suture dehiscence in patients after abdominal or pelvic surgery, potential for loss of vascular access, and potential for endotracheal extubation. The warning systems are a continuous computerized resource of essential situations that promote patient safety and enable the construction of a way to stimulate clinical reasoning and support clinical decision making of nurses in intensive care.

Management of nanomaterials safety in research environment

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting innovation and discoveries by ensuring them a safe environment even in the case of very novel products. The proposed measures are not considered as constraints but as a support to their research. This methodology is being implemented at the Ecole Polytechnique de Lausanne in over 100 research labs dealing with nanomaterials. It is our opinion that it would be useful to other research and academia institutions as well. [Authors]

A Transportation Safety Planning Tool for the City of Ames, August 2011

The historically-reactive approach to identifying safety problems and mitigating them involves selecting black spots or hot spots by ranking locations based on crash frequency and severity. The approach focuses mainly on the corridor level without taking the exposure rate (vehicle miles traveled) and socio-demographics information of the study area, which are very important in the transportation planning process, into consideration. A larger study analysis unit at the Transportation Analysis Zone (TAZ) level or the network planning level should be used to address the needs of development of the community in the future and incorporate safety into the long-range transportation planning process. In this study, existing planning tools (such as the PLANSAFE models presented in NCHRP Report 546) were evaluated for forecasting safety in small and medium-sized communities, particularly as related to changes in socio-demographics characteristics, traffic demand, road network, and countermeasures. The research also evaluated the applicability of the Empirical Bayes (EB) method to network-level analysis. In addition, application of the United States Road Assessment Program (usRAP) protocols at the local urban road network level was investigated. This research evaluated the applicability of these three methods for the City of Ames, Iowa. The outcome of this research is a systematic process and framework for considering road safety issues explicitly in the small and medium-sized community transportation planning process and for quantifying the safety impacts of new developments and policy programs. More specifically, quantitative safety may be incorporated into the planning process, through effective visualization and increased awareness of safety issues (usRAP), the identification of high-risk locations with potential for improvement, (usRAP maps and EB), countermeasures for high-risk locations (EB before and after study and PLANSAFE), and socio-economic and demographic induced changes at the planning-level (PLANSAFE).

Indicateurs sécurité en obstétrique : une étude Delphi [Patient safety indicators for obstetrics: a Delphi based study]

OBJECTIVE: Clinical indicators are increasingly used to assess safety of patient care. In obstetrics, only a few indicators have been validated to date and none is used across specialties. The purpose of this study was to identify and assess for face and content validity a group of safety indicators that could be used by anaesthetists, obstetricians and neonatologists involved in labour and delivery units. MATERIALS AND METHODS: We first conducted a systematic review of the literature to identify potential measures. Indicators were then validated by a panel of 30 experts representing all specialties working in labour and delivery units. We used the Delphi method, an iterative questionnaire-based consensus seeking technique. Experts determined on a 7-point Likert scale (1=most representative/7=less representative) the soundness of each indicator as a measure of safety and their possible association with errors and complications caused by medical management. RESULTS: We identified 44 potential clinical indicators from the literature. Following the Delphi process, 13 indicators were considered as highly representative of safety during obstetrical care (mean score</=2.3). Experts ranked 6 of these indicators as being strongly associated to potential errors and complications. CONCLUSIONS: We identified and validated for face and content, a group of six clinical indicators to measure potentially preventable iatrogenic complications in labour and delivery units.

Home Safety Checklist for Families with Young Children, 2011

This safety checklist is designed to help you protect your children and everyone else in the family, from unintentional injuries. It is designed to be an easy, room-by-room survey that will quickly point out possible dangers. When you find a hazardous situation, change it – NOW!! Of course, no checklist will identify all the possible dangers, so use this process to look for other hazards. After you have read through the listed items for a room take a few minutes to look at the room from the view-point of a child.

From Empirical Bayes to Full Bayes: Methods for Analysing Traffice Safety Data, October 25, 2004

Traffic safety engineers are among the early adopters of Bayesian statistical tools for analyzing crash data. As in many other areas of application, empirical Bayes methods were their first choice, perhaps because they represent an intuitively appealing, yet relatively easy to implement alternative to purely classical approaches. With the enormous progress in numerical methods made in recent years and with the availability of free, easy to use software that permits implementing a fully Bayesian approach, however, there is now ample justification to progress towards fully Bayesian analyses of crash data. The fully Bayesian approach, in particular as implemented via multi-level hierarchical models, has many advantages over the empirical Bayes approach. In a full Bayesian analysis, prior information and all available data are seamlessly integrated into posterior distributions on which practitioners can base their inferences. All uncertainties are thus accounted for in the analyses and there is no need to pre-process data to obtain Safety Performance Functions and other such prior estimates of the effect of covariates on the outcome of interest. In this slight, fully Bayesian methods may well be less costly to implement and may result in safety estimates with more realistic standard errors. In this manuscript, we present the full Bayesian approach to analyzing traffic safety data and focus on highlighting the differences between the empirical Bayes and the full Bayes approaches. We use an illustrative example to discuss a step-by-step Bayesian analysis of the data and to show some of the types of inferences that are possible within the full Bayesian framework.