Fingerprint Volatile Organic Compounds (VOC) analysis in Goat’s Milk and Halloumi Cheese as Marker for Authentication of Region of Origin

Goats’ milk is responsible for unique traditional products such as Halloumi cheese. The characteristics of Halloumi depend on the original features of the milk and on the conditions under which the milk has been produced such as feeding regime of the animals or region of production. Using a range of milk (33) and Halloumi (33) samples collected over a year from three different locations in Cyprus (A, Anogyra; K, Kofinou; P, Paphos), the potential for fingerprint VOC analysis as marker to authenticate Halloumi was investigated. This unique set up consists of an in-injector thermo desorption (VOCtrap needle) and a chromatofocusing system based on mass spectrometry (VOCscanner). The mass spectra of all the analyzed samples are treated by multivariate analysis (Principle component analysis and Discriminant functions analysis). Results showed that the highland area of product (P) is clearly identified in milks produced (discriminant score 67%). It is interesting to note that the higher similitude found on milks from regions “A” and “K” (with P being distractive; discriminant score 80%) are not ‘carried over’ on the cheeses (higher similitude between regions “A” and “P”, with “K” distinctive). Data have been broken down into three seasons. Similarly, the seasonality differences observed in different milks are not necessarily reported on the produced cheeses. This is expected due to the different VOC signatures developed in cheeses as part of the numerous biochemical changes during its elaboration compared to milk. VOC however it is an additional analytical tool that can aid in the identification of region origin in dairy products.

The impact of body fat on three dimensional motion of the paediatric foot during walking

Childhood obesity is commonly associated with a pes planus foot type and altered lower limb joint function during walking. However, limited information has been reported on dynamic intersegment foot motion with the level of obesity in children. The aim of this study was to explore the relationships between intersegment foot motion during gait and body fat in boys age 7 to 11 years. Fat mass was measured in fifty-five boys using air displacement plethysmography. Three-dimensional gait analysis was conducted on the right foot of each participant using the 3DFoot model to capture angular motion of the shank, calcaneus, midfoot and metatarsals. Two multivariate statistical techniques were employed; principle component analysis reduced the multidimensional nature of gait analysis, and multiple linear regression analysis accounted for potential confounding factors. Higher fat mass predicted greater plantarflexion of the calcaneus during the first half and end of stance phase and at the end of swing phase. Greater abduction of the calcaneus throughout stance and swing was predicted by greater fat mass. At the midfoot, higher fat mass predicted greater dorsiflexion and eversion throughout the gait cycle. The findings present novel information on the relationships between intersegment angular motion of the foot and body fat in young boys. The data indicates a more pronated foot type in boys with greater body fat. These findings have clinical implications for pes planus and a predisposition for pain and discomfort during weight bearing activities potentially reducing motivation in obese children to be physically active.

Unsupervised learning to cluster the disease stages in parkinson's disease

Parkinson's disease (PD) is the second most common neurodegenerative disorder (after Alzheimer's disease) and directly affects upto 5 million people worldwide. The stages (Hoehn and Yaar) of disease has been predicted by many methods which will be helpful for the doctors to give the dosage according to it. So these methods were brought up based on the data set which includes about seventy patients at nine clinics in Sweden. The purpose of the work is to analyze unsupervised technique with supervised neural network techniques in order to make sure the collected data sets are reliable to make decisions. The data which is available was preprocessed before calculating the features of it. One of the complex and efficient feature called wavelets has been calculated to present the data set to the network. The dimension of the final feature set has been reduced using principle component analysis. For unsupervised learning k-means gives the closer result around 76% while comparing with supervised techniques. Back propagation and J4 has been used as supervised model to classify the stages of Parkinson's disease where back propagation gives the variance percentage of 76-82%. The results of both these models have been analyzed. This proves that the data which are collected are reliable to predict the disease stages in Parkinson's disease.

Identification of cause of impairment in spiral drawings, using non-stationary feature extraction approach

Parkinson’s disease is a clinical syndrome manifesting with slowness and instability. As it is a progressive disease with varying symptoms, repeated assessments are necessary to determine the outcome of treatment changes in the patient. In the recent past, a computer-based method was developed to rate impairment in spiral drawings. The downside of this method is that it cannot separate the bradykinetic and dyskinetic spiral drawings. This work intends to construct the computer method which can overcome this weakness by using the Hilbert-Huang Transform (HHT) of tangential velocity. The work is done under supervised learning, so a target class is used which is acquired from a neurologist using a web interface. After reducing the dimension of HHT features by using PCA, classification is performed. C4.5 classifier is used to perform the classification. Results of the classification are close to random guessing which shows that the computer method is unsuccessful in assessing the cause of drawing impairment in spirals when evaluated against human ratings. One promising reason is that there is no difference between the two classes of spiral drawings. Displaying patients self ratings along with the spirals in the web application is another possible reason for this, as the neurologist may have relied too much on this in his own ratings.

Visual tracking of vehicles using multiresolution analysis and neural network

This paper describes the procedure for detection and tracking of a vehicle from an on-road image sequence taken by a monocular video capturing device in real time. The main objective of such a visual tracking system is to closely follow objects in each frame of a video stream, such that the object position as well as other geometric information are always known. In the tracking system described, the video capturing device is also moving. It is a challenge to detect and track a moving vehicle under a constantly changing environment coupled to real time video processing. The system suggested is robust to implement under different illuminating conditions by using the monocular video capturing device. The vehicle tracking algorithm is one of the most important modules in an autonomous vehicle system, not only it should be very accurate but also must have the safety of other vehicles, pedestrians, and the moving vehicle itself. In order to achieve this an algorithm of multi resolution technique based on Haar basis functions were used for the wavelet transform, where a combination of classification was carried out with the multilayer feed forward neural network. The classification is done in a reduced dimensional space, where principle component analysis (PCA) dimensional reduction technique has been applied to make the classification process much more efficient. The results show the effectiveness of the proposed methodology.

Detection of vehicles with monolithic classifier vis-à-vis a boosted cascaded classifier

This paper describes the comparison of accuracy and performance of two machine learning approaches for visual object detection and tracking vehicles, from an on-road image sequence. The first is a neural network based approach. Where an algorithm of multi resolution technique based on Haar basis functions was used to obtain an image with different scales. Thereafter a classification was carried out with the multilayer feed forward neural network. Principle Component Analysis (PCA) technique was used as a dimension reduction technique to make the classification process much more efficient. The second approach is based on boosting which also yields very good detection rates. In general, boosting is one of the most important developments in classification methodology. It works by sequentially applying a classification algorithm to reweighed versions of the training data, followed by taking a weighted majority vote of the sequence of classifiers thus produced. For this work, a strong classifier was trained by the adaboost algorithm. The results of comparing the two methodologies visà-vis shows the effectiveness of the methods that have been used.

Intelligent clothing for automated recognition of human physical activities in free-living environment

This paper presents an intelligent clothing framework for human daily activity recognition using a single waist-worn tri-axial accelerometer sensor coupled with a robust pattern recognition system. The activity recognition algorithm is realized to distinguish six different physical activities through three major steps: acceleration signal collection/pre-processing, wavelet-based principle component analysis, and a support vector machine classifier. The proposed activity recognition method has been experimentally validated through two batches of trials with an overall mean classification accuracy of 95.25 and 94.87%, respectively. These results suggest that the intelligent clothing is not only able to learn the activity patterns but also capable of generalizing new data from both known and unknown subjects. This enables the proposed intelligent clothing to be applied in a comfortable and in situ assessment of human physical activities, which would open up new market segments to the textile industry.

Driver verification based on handgrip recognition on steering wheel

This paper presents a novel driver verification algorithm based on the recognition of handgrip patterns on steering wheel. A pressure sensitive mat mounted on a steering wheel is employed to collect a series of pressure images exerted by the hands of the drivers who intend to start the vehicle. Then, feature extraction from those images is carried out through two major steps: Quad-Tree-based multi-resolution decomposition on the images and Principle Component Analysis (PCA)-based dimension reduction, followed by implementing a likelihood-ratio classifier to distinguish drivers into known or unknown ones. The experimental results obtained in this study show that the mean acceptance rates of 78.15% and 78.22% for the trained subjects and the mean rejection rates of 93.92% and 90.93% to the un-trained ones are achieved in two trials, respectively. It can be concluded that the driver verification approach based on the handgrip recognition on steering wheel is promising and will be further explored in the near future.

Automated classification of human daily activities in ambulatory environment

This paper presents a human daily activity classification approach based on the sensory data collected from a single tri-axial accelerometer worn on waist belt. The classification algorithm was realized to distinguish 6 different activities including standing, jumping, sitting-down, walking, running and falling through three major steps: wavelet transformation, Principle Component Analysis (PCA)-based dimensionality reduction and followed by implementing a radial basis function (RBF) kernel Support Vector Machine (SVM) classifier. Two trials were conducted to evaluate different aspects of the classification scheme. In the first trial, the classifier was trained and evaluated by using a dataset of 420 samples collected from seven subjects by using a k-fold cross-validation method. The parameters σ and c of the RBF kernel were optimized through automatic searching in terms of yielding the highest recognition accuracy and robustness. In the second trial, the generation capability of the classifier was also validated by using the dataset collected from six new subjects. The average classification rates of 95% and 93% are obtained in trials 1 and 2, respectively. The results in trial 2 show the system is also good at classifying activity signals of new subjects. It can be concluded that the collective effects of the usage of single accelerometer sensing, the setting of the accelerometer placement and efficient classifier would make this wearable sensing system more realistic and more comfortable to be implemented for long-term human activity monitoring and classification in ambulatory environment, therefore, more acceptable by users.

A fast kernel dimension reduction algorithm with applications to face recognition

This paper presents a novel dimensionality reduction algorithm for kernel based classification. In the feature space, the proposed algorithm maximizes the ratio of the squared between-class distance and the sum of the within-class variances of the training samples for a given reduced dimension. This algorithm has lower complexity than the recently reported kernel dimension reduction(KDR) for supervised learning. We conducted several simulations with large training datasets, which demonstrate that the proposed algorithm has similar performance or is marginally better compared with KDR whilst having the advantage of computational efficiency. Further, we applied the proposed dimension reduction algorithm to face recognition in which the number of training samples is very small. This proposed face recognition approach based on the new algorithm outperforms the eigenface approach based on the principle component analysis (PCA), when the training data is complete, that is, representative of the whole dataset.

Structural damage detection by fuzzy clustering

The development of strategies for structural health monitoring (SHM) has become increasingly important because of the necessity of preventing undesirable damage. This paper describes an approach to this problem using vibration data. It involves a three-stage process: reduction of the time-series data using principle component analysis (PCA), the development of a data-based model using an auto-regressive moving average (ARMA) model using data from an undamaged structure, and the classification of whether or not the structure is damaged using a fuzzy clustering approach. The approach is applied to data from a benchmark structure from Los Alamos National Laboratory, USA. Two fuzzy clustering algorithms are compared: fuzzy c-means (FCM) and Gustafson-Kessel (GK) algorithms. It is shown that while both fuzzy clustering algorithms are effective, the GK algorithm marginally outperforms the FCM algorithm. (C) 2008 Elsevier Ltd. All rights reserved.

Invasive Litter, Not an Invasive Insectivore, Determines Invertebrate Communities in Hawaiian Forests

In Hawaii, invasive plants have the ability to alter litter-based food chains because they often have litter traits that differ from native species. Additionally, abundant invasive predators, especially those representing new trophic levels, can reduce prey. The relative importance of these two processes on the litter invertebrate community in Hawaii is important, because they could affect the large number of endemic and endangered invertebrates. We determined the relative importance of litter resources, represented by leaf litter of two trees, an invasive nitrogen-fixer, Falcataria moluccana, and a native tree, Metrosideros polymorpha, and predation of an invasive terrestrial frog, Eleutherodactylus coqui, on leaf litter invertebrate abundance and composition. Principle component analysis revealed that F. moluccana litter creates an invertebrate community that greatly differs from that found in M. polymorpha litter. We found that F. moluccana increased the abundance of non-native fragmenters (Amphipoda and Isopoda) by 400% and non-native predaceous ants (Hymenoptera: Formicidae) by 200%. E. coqui had less effect on the litter invertebrate community; it reduced microbivores by 40% in F. moluccana and non-native ants by 30% across litter types. E. coqui stomach contents were similar in abundance and composition in both litter treatments, despite dramatic differences in the invertebrate community. Additionally, our results suggest that invertebrate community differences between litter types did not cascade to influence E. coqui growth or survivorship. In conclusion, it appears that an invasive nitrogen-fixing tree species has a greater influence on litter invertebrate community abundance and composition than the invasive predator, E. coqui.

Extensions to Gene Set Enrichment

Motivation: Gene Set Enrichment Analysis (GSEA) has been developed recently to capture moderate but coordinated changes in the expression of sets of functionally related genes. We propose number of extensions to GSEA, which uses different statistics to describe the association between genes and phenotype of interest. We make use of dimension reduction procedures, such as principle component analysis to identify gene sets containing coordinated genes. We also address the problem of overlapping among gene sets in this paper. Results: We applied our methods to the data come from a clinical trial in acute lymphoblastic leukemia (ALL) [1]. We identified interesting gene sets using different statistics. We find that gender may have effects on the gene expression in addition to the phenotype effects. Investigating overlap among interesting gene sets indicate that overlapping could alter the interpretation of the significant results.

In vitro accuracy evaluation of image-guided robot system for direct cochlear access

HYPOTHESIS A previously developed image-guided robot system can safely drill a tunnel from the lateral mastoid surface, through the facial recess, to the middle ear, as a viable alternative to conventional mastoidectomy for cochlear electrode insertion. BACKGROUND Direct cochlear access (DCA) provides a minimally invasive tunnel from the lateral surface of the mastoid through the facial recess to the middle ear for cochlear electrode insertion. A safe and effective tunnel drilled through the narrow facial recess requires a highly accurate image-guided surgical system. Previous attempts have relied on patient-specific templates and robotic systems to guide drilling tools. In this study, we report on improvements made to an image-guided surgical robot system developed specifically for this purpose and the resulting accuracy achieved in vitro. MATERIALS AND METHODS The proposed image-guided robotic DCA procedure was carried out bilaterally on 4 whole head cadaver specimens. Specimens were implanted with titanium fiducial markers and imaged with cone-beam CT. A preoperative plan was created using a custom software package wherein relevant anatomical structures of the facial recess were segmented, and a drill trajectory targeting the round window was defined. Patient-to-image registration was performed with the custom robot system to reference the preoperative plan, and the DCA tunnel was drilled in 3 stages with progressively longer drill bits. The position of the drilled tunnel was defined as a line fitted to a point cloud of the segmented tunnel using principle component analysis (PCA function in MatLab). The accuracy of the DCA was then assessed by coregistering preoperative and postoperative image data and measuring the deviation of the drilled tunnel from the plan. The final step of electrode insertion was also performed through the DCA tunnel after manual removal of the promontory through the external auditory canal. RESULTS Drilling error was defined as the lateral deviation of the tool in the plane perpendicular to the drill axis (excluding depth error). Errors of 0.08 ± 0.05 mm and 0.15 ± 0.08 mm were measured on the lateral mastoid surface and at the target on the round window, respectively (n =8). Full electrode insertion was possible for 7 cases. In 1 case, the electrode was partially inserted with 1 contact pair external to the cochlea. CONCLUSION The purpose-built robot system was able to perform a safe and reliable DCA for cochlear implantation. The workflow implemented in this study mimics the envisioned clinical procedure showing the feasibility of future clinical implementation.

Impact of different cultivation methods on the metabolic profile of apples studied by 1H HR-MAS NMR spectroscopy

The cultivation of dessert apples has to meet the consumer's increasing demand for high fruit quality and a sustainable mostly residue-free production while ensuring a competitive agricultural productivity. It is therefore of great interest to know the impact of different cultivation methods on the fruit quality and the chemical composition, respectively. Previous studies have demonstrated the feasibility of High Resolution Magic Angle Spinning (HR-MAS) NMR spectroscopy directly performed on apple tissue as analytical tool for metabonomic studies. In this study, HR-MAS NMR spectroscopy is applied to apple tissue to analyze the metabolic profiles of apples grown under 3 different cultivation methods. Golden Delicious apples were grown applying organic (Bio), integrated (IP) and low-input (LI) plant protection strategies. A total of 70 1H HR-MAS NMR spectra were analyzed by means of principle component analysis (PCA) and partial least squares discriminant analysis (PLS-DA). Apples derived from Bio-production could be well separated from the two other cultivation methods applying both, PCA and PLS-DA. Apples obtained from integrated (IP) and low-input (LI) production discriminated when taking the third PLS-component into account. The identified chemical composition and the compounds responsible for the separation, i.e. the PLS-loadings, are discussed. The results are compared with fruit quality parameters assessed by conventional methods. The present study demonstrates the potential of HR-MAS NMR spectroscopy of fruit tissue as analytical tool for finding markers for specific fruit production conditions like the cultivation method.