Aspects of the biology and behavior of Nesolynx sp. (Hymenoptera, Eulophidae)

This research was carried out to study some aspects of the biology and behavior of Nesolynx sp. (Hymenoptera, Eulophidae), a pupal parasite of Psorocampa denticulata (Lepidoptera, Notodontidae) a defoliating caterpillar of Eucalyptus spp. in Brazil. The adults emerge from the host pupa through a circular hole on Its dorsal region. Mating occurs righ after the emergence and the longevity of adults was two days for the males and four days for the females. Regarding to the host species Diatraea saccharalis showed a number of adults significantly greater than Galleria mellonella and the increasing temperature from 21±1 °C to 26±1°C caused a significative increasing in the number of emerged adults in both host species. The emergence of adults increased proportionally to the period of exposition to the host up to 3.50 days; after that, a considerable decrease in the emergence was observed. The parasitoid showed parthenogenetic reproduction therefore the average number of emerged males was significantly greater than the number of females. The sex ratio was similar for the insects emerged from virgin or mated females (0,96) and the life cycle lenght was around 18.34 days for both conditions.

Larval life in the leaves: arboreal tadpole types, with special attention to the morphology, ecology, and behavior of the Oophagous Osteopilus brunneus (Hylidae) larva / Michael J. Lannoo, Daniel S. Townsend, Richard J. Wassersug.

n.s. no.38(1987)

Composition of the family Didelphidae Gray, 1821 (Didelphoidea:Marsupialia), with a review of the morphology and behavior of the included four-eyed pouched opossums of the genus Philander Tiedemann, 1808 /

n.s. no.86(1997)

Seasonal status, relative abundance, and behavior of the birds of Concepción, Departamento Santa Cruz, Bolivia / Susan E. Davis.

n.s. no.71(1993)

Studies on survival, biological activities and behavior of Biomphalaria glabrata, the host snail of Schistosomiasis, submitted to increased hydrostatic pressure: a technique

To study changes in survival, in biological activities and behavior of planorbids submitted to increased hydrostatic pressure, we developed a technique using two transparent chambers and a hydraulic piston. The apparatus permitted renewal of the liquid medium without substantial variations in pressure, thus eliminating excretion products and maintaining the desired O2 level and thereby permitting us to evaluate the effects of pressure independently of the occurrence of anoxia. Pressure was maintained without any contact of the liquid medium with compressed air, a situation which reproduced with relative fidelity what occurs in nature and assured the presence of the same amounts of gases in the two observation chambers (Control and Experimental). Biomphalaria glabrata was found to be able to survive at least 48 hours when submitted to 49.02 x 10**4 Pa (equivalent to a water depth of 48.8 m), continuing to day egg masses and showing few behavioral changes when compared with the control group.

Preparation and analysis of fetal liver extracts.

The aim of this work is to describe the techniques that have been used for preparation and analysis of whole fetal liver extracts destined for in utero transplantation. Nine fetal livers between 12 and 17 weeks of gestation were prepared: cell counts and assessment of the hematopoietic cell viability were performed on cell suspensions. Hepatocytes represented 40 to 80% of the whole cell population. The remaining cells were constituted by hematopoietic cells (mainly erythroblasts), as well as by endothelial cells. The latter expressed CD34 on their surface, interfering with the assessment of CD34+ hematopoietic cells by flow cytometry. Direct visual morphologic control using alkaline phosphatase anti-alkaline phosphatase techniques was needed to differentiate hematopoietic from extra-hematopoietic CD34+ cells. Between 3.0 and 34.6 x 10(6) CD34+ viable hematopoietic cells were collected per fetal liver. Adequate differentiation of these cells into burst-forming units erythroid (BFU-E), colony-forming units granulocyte-macrophage (CFU-GM), and colony-forming units granulocyte erythroid macrophage megakaryocyte (CFU-GEMM) has been shown for each sample in clonogeneic cultures. In conclusion, fetal liver is a potential source of hematopoietic stem cells. Their numeration, based on the presence of CD34, is hampered by the expression of this antigen on other cells contained in the liver cell extract, in particular endothelial cells.

Preparation and properties of starch-based biopolymers modified with difunctional isocyanates

The present work reports on the preparation of thermoplastic starch (TPS) modified in situ with a diisocyanate derivative. Evidence of the condensation reaction between the hydroxyl groups of starch and glycerol with the isocyanate function (NCO) was confirmed by FTIR analysis. The evolution of the properties of the ensuing TPS, in term of mechanical properties, microstructure, and water sensitivity, was investigated using tensile mechanical, dynamic mechanical thermal analysis (DMTA), X-ray diffraction (XRD), and water uptake. The results showed that the addition of isocyanate did not affect the crystallinity of the TPS and slightly reduced the water uptake of the material. The evolution of the mechanical properties with ageing became less pronounced by the addition of the isocyanate as their amount exceeded 4 to 6wt%.

Plastinated Ethmoidal Region : II. The Preparation and Use of Radio-Opaque Artery Casts in Clinical Teaching.

In endoscopic sinus surgery, knowledge of the course of the internal ethmoida and orbital arteries is crucial.The maxillary and the internal carotid arteries of cadavers were injected with radio-opaque , red colorede silicone. The ethmoidal regions were perpared and plastinated using the standard S10 technique. On some specimens, the ophtalmic and ethmoidal arteries were dissected prior to plastination. The plastinated specimens of the ethmoidal blocks were successfullyintroduced into clinical teaching of sinus anatomy and surgery as an aid to study vaascularization an dits relationship to surgical procedures. Among the advantages of this method are the long-lasting preservation of dissected tissue, visualization of arteries during endoscopic and radiological examinations, and invaluable teachjing and training resources for endoscopic sinus surgery.

Occurrence, biology and behavior of Liogenys fuscus Blanchard (Insecta, Coleoptera, Scarabaeidae) in Aquidauana, Mato Grosso do Sul, Brazil

Due to the importance of some Pleurosticti Scarabaeidae as agricultural pests allied to information absence on the species that occur in Brazilian Central-West region, on studies occurrence, biology and behavior on this group of scarabs were conducted. Biology and behavioral studies started with Liogenys fuscus Blanchard, 1850 (Melolonthinae), a very common species and were developed in Aquidauana, Mato Grosso do Sul. Adult beetles were collected from light traps from February 2005 to January 2007, at the experimental farm of the Universidade Estadual de Mato Grosso do Sul in Aquidauana (UEMS). In the laboratory adults were placed in plastic containers with soil with sprouts of Brachiaria decumbens Stapf (Poaceae). Eggs were transferred to a climatized chamber at 26 ± 1º C with a 12hourlight, 12hour darkness photoperiod cycle. Adult flight activity occurred in August and in September to December from 06:00 pm to 06:00 am, with the largest number of individuals flying from 07:00 to 10:00 pm. Eggs measured 1 x 1.5 mm and were laid individually or in groups in soil chambers; eggs were initially white and became yellow near hatching. The embryonic period lasted 14.3 days; first, second and third instars lasted 28.5, 48.8, and 68.2 days, respectively. The prepupal period lasted 120.2 days and the prepupa stayed inactive in soil. The mean duration of pupal stage was 27.5 days and the mean longevity of adults was 23.6 days. In laboratory the calling behavior between males and females was observed; copulation lasted, in mean, 25 minutes.

Mirror me : the effect of the voting advice application smartvote on voting preferences and behavior of Swiss voters

Voting Advice Applications (VAAs) have become a central component of election campaigns worldwide. Through matching political preferences of voters to parties and candidates, the web application grants voters a look into their political mirror and reveals the most suitable political choices to them in terms of policy congruence. Both the dense and concise information on the electoral offer and the comparative nature of the application make VAAs an unprecedented information source for electoral decision making. In times where electoral choices are found to be highly individualized and driven by political issue positions, an ever increasing number of voters turn to VAAs before casting their ballots. With VAAs in high demand, the question of their effects on voters has become a pressing research topic. In various countries, survey research has been used to proclaim an impact of VAAs on electoral behavior, yet practically all studies fail to provide the scientific evidence that would allow for making such claims. In this thesis, I set out to systematically establish the causal link between VAA use and electoral behavior, using various data sources and appropriate statistical techniques in doing so. The focus lies on the Swiss VAA smartvote, introduced in the forefront of the 2003 Swiss federal elections and meanwhile an integral part of the national election campaign, smartvote has produced over a million voting recommendations in the last Swiss federal elections to an active electorate of two million, potentially guiding a vast amount of voters in their choices on the ballot. In order to determine the effect of the VAA on electoral behavior, I analyze both voting preferences and choice among Swiss voters during two consecutive election periods. First, I introduce statistical techniques to adequately examine VAA effects in observational studies and use them to demonstrate that voters who used smartvote prior to the 2007 Swiss federal elections were significantly more likely to swing vote in the elections than non- users. Second, I analyze preference voting during the same election and show that the smartvote voting recommendation inclines politically knowledgeable voters to modify their ballots and cast candidate specific preference votes. Third, to further tackle the indication that smartvote use affects the preference structure of voters, I employ an experimental research design to demonstrate that voters who use the application tend to strengthen their vote propensities for their most preferred party and adapt their overall party preferences in a way that they consider more than one party as eligible vote options after engaging with the application. Finally, vote choice is examined for the 2011 Swiss federal election, showing once more that the VAA initiated a change of party choice among voters. In sum, this thesis presents empirical evidence for the transformative effect of the Swiss VAA smartvote on the electoral behavior.

Activity and behavior of blowflies on pig liver baits in spring

Des pièges attractifs contenant du foie frais et du foie âgé de 2 et 4 jours ont été utilisés au cours de 9 journées de capture (avril à mai 1999). Parmi les 451 spécimens récoltés, 7 espèces de Calliphoridae ont été identifiées. Les conditions météorologiques, exprimées par la pluie, la température et les radiations solaires, ont une influence signficative sur l'activité des mouches. A l'exception de Lucilia sericata et L. Illustris, les autres espèces montrent une nette préférence pour les pièges contenant du foie de 4 jours. Le sex-ratio est toujours en faveur des femelles et varie de 1.7:1 (L. silvarum) à 18.8:1 (L. illustris).

Wind Loads on Dynamic Message Cabinets and Behavior of Supporting Trusses, TR-612, 2013

Large Dynamic Message Signs (DMSs) have been increasingly used on freeways, expressways and major arterials to better manage the traffic flow by providing accurate and timely information to drivers. Overhead truss structures are typically employed to support those DMSs allowing them to provide wider display to more lanes. In recent years, there is increasing evidence that the truss structures supporting these large and heavy signs are subjected to much more complex loadings than are typically accounted for in the codified design procedures. Consequently, some of these structures have required frequent inspections, retrofitting, and even premature replacement. Two manufacturing processes are primarily utilized on truss structures - welding and bolting. Recently, cracks at welding toes were reported for the structures employed in some states. Extremely large loads (e.g., due to high winds) could cause brittle fractures, and cyclic vibration (e.g., due to diurnal variation in temperature or due to oscillations in the wind force induced by vortex shedding behind the DMS) may lead to fatigue damage, as these are two major failures for the metallic material. Wind and strain resulting from temperature changes are the main loads that affect the structures during their lifetime. The American Association of State Highway and Transportation Officials (AASHTO) Specification defines the limit loads in dead load, wind load, ice load, and fatigue design for natural wind gust and truck-induced gust. The objectives of this study are to investigate wind and thermal effects in the bridge type overhead DMS truss structures and improve the current design specifications (e.g., for thermal design). In order to accomplish the objective, it is necessary to study structural behavior and detailed strain-stress of the truss structures caused by wind load on the DMS cabinet and thermal load on the truss supporting the DMS cabinet. The study is divided into two parts. The Computational Fluid Dynamics (CFD) component and part of the structural analysis component of the study were conducted at the University of Iowa while the field study and related structural analysis computations were conducted at the Iowa State University. The CFD simulations were used to determine the air-induced forces (wind loads) on the DMS cabinets and the finite element analysis was used to determine the response of the supporting trusses to these pressure forces. The field observation portion consisted of short-term monitoring of several DMS Cabinet/Trusses and long-term monitoring of one DMS Cabinet/Truss. The short-term monitoring was a single (or two) day event in which several message sign panel/trusses were tested. The long-term monitoring field study extended over several months. Analysis of the data focused on trying to identify important behaviors under both ambient and truck induced winds and the effect of daily temperature changes. Results of the CFD investigation, field experiments and structural analysis of the wind induced forces on the DMS cabinets and their effect on the supporting trusses showed that the passage of trucks cannot be responsible for the problems observed to develop at trusses supporting DMS cabinets. Rather the data pointed toward the important effect of the thermal load induced by cyclic (diurnal) variations of the temperature. Thermal influence is not discussed in the specification, either in limit load or fatigue design. Although the frequency of the thermal load is low, results showed that when temperature range is large the restress range would be significant to the structure, especially near welding areas where stress concentrations may occur. Moreover stress amplitude and range are the primary parameters for brittle fracture and fatigue life estimation. Long-term field monitoring of one of the overhead truss structures in Iowa was used as the research baseline to estimate the effects of diurnal temperature changes to fatigue damage. The evaluation of the collected data is an important approach for understanding the structural behavior and for the advancement of future code provisions. Finite element modeling was developed to estimate the strain and stress magnitudes, which were compared with the field monitoring data. Fatigue life of the truss structures was also estimated based on AASHTO specifications and the numerical modeling. The main conclusion of the study is that thermal induced fatigue damage of the truss structures supporting DMS cabinets is likely a significant contributing cause for the cracks observed to develop at such structures. Other probable causes for fatigue damage not investigated in this study are the cyclic oscillations of the total wind load associated with the vortex shedding behind the DMS cabinet at high wind conditions and fabrication tolerances and induced stresses due to fitting of tube to tube connections.

Preparation and management of complications in prostate biopsies

Transrectal ultrasonography-guided biopsy plays a key role in prostate sampling for cancer detection. Among interventional procedures, it is one of the most frequent procedures performed by radiologists. Despite the safety and low morbidity of such procedure, possible complications should be promptly assessed and treated. The standardization of protocols and of preprocedural preparation is aimed at minimizing complications as well as expediting their management. The authors have made a literature review describing the possible complications related to transrectal ultrasonography-guided prostate biopsy, and discuss their management and guidance to reduce the incidence of such complications.