National report of the frame survey 2010 on the Uganda side of Lake Victoria

This is a report on the results of the Frame Survey conducted in the Uganda side of Lake Victoria during August 2010 by the LVFO Institutions, namely: the Department of Fisheries Resources (DFR) Uganda and the National Fisheries Resources Research Institute (NaFIRRI) in close collaboration with the District Fisheries offices of Busia, Bugiri, Mayuge, Jinja, Mukono, Kampala, Wakiso, Mpigi, Masaka, Kalangala and Rakai. The authors are grateful to the LVEMP II, for providing funds for the survey and the LVFO secretariat coordination. Fisheries Frame surveys have been carried out on Lake Victoria biannually since 2000 to determine the number of fishers, fish landing sites, and facilities at the landing sites, as well as the composition of fishing crafts, their mode of propulsion, fishing gears and the fish species they target. This information is used to guide development and management of the lake’s fisheries. Following the reorganisation of landing sites into Beach Management Units (BMUs), the number of landing sites decreased from 597 in 2000 to 435 in 2008. The survey in 2010 showed an increase to 503 landing sites, an indication that new landing sites are coming up. The fish landing sites continue to have inadequate facilities such as fish shades, cold rooms to service the fisheries industry and very few (5%) have access to electricity and 32% had access to all weather roads. There has been some progressive improvement in the landing site coverage of basic hygiene and sanitation facilities, especially public toilet facilities from 17% in 2000 to 39% in 2010; and portable water from 4% to 17% respectively. However more effort is required to cover all landing sites. Most landing sites (83%) have access to mobile phone networks which eases communication. 46% of landing sites had access to a Health clinic and 64% had a Primary school within a radius of 2 km.

National report of the frame survey 2006 in the Ugandan part of Lake Victoria

Fisheries Frame surveys have been carried out on Lake Victoria biannually since 2000 to determine· the number of fishers, fish landing sites, facilities at the landing sites. Information on the composition fishing crafts, their mode of propulsion, fishing gears and the fish species they target is also collected. This information is used to guide development and management of the lake's fisheries. The results of the four surveys carried out since 2000 show that the number of landing sites has decreased by 24% from 597 in 2000 to 481 in 2006, mainly as result of reorganisation of landing sites into Beach Management Units (BMUs). The fish landing sites continue to have inadequate facilities to service the fisheries industry e.g. in the 2006 survey only 11.2% of landing sites had fish shades; <0.6% had cold rooms; 3.5% had electricity; and only 35.5% had toilet facilities. Similarly, only 11.4% of landing sites had portable water; 2.5% had jetties, 3.7% had 'fish stores; and 36% were accessible by all weather roads. There is need to improve facilities servicing fisheries at landing sites, with major emphasis on sanitary facilities, especially toilets and portable water. The BMUs should be sensitised to prioritise the construction and utilisation of public toilet facilities at their respective landing sites. The ultimate aim should be to have public toilets at all fish landing sites. The trend of the various indicators of fishing effort has continued upwards: The total number of fishers increased by 43.5% from 37,721 in 2004 to 54,148 in 2006 and the number of fishing crafts increased (43.9%) from 16,775 in 2004 to 24,148 in 2006 over the same period. The total number of gillnets increased by 28.6% from 458,597 in 2004 to 589,777 in 2006 and the number of long line hooks increased by 136% from 968,848 to 2,285,609. The number of fishing crafts using outboard engines also increased from 3,173 in 2004 to 5,047 in 2006 suggesting that more fishers were going far in search of fish. There is still a large number of illegal gears especially beach seines, which increased by 58.8% from 954 in 2004 to 1420 in 2006. Efforts to remove these very destructive gears should be stepped up. There was also larger increase in number of illegal gillnets <5 inch mesh size. These increased by 63% from 56,246 in 2004 to 91,740 in 2006 compared with 23.8% increase of gillnets ~5 inch mesh size. There were also large increases in the numbers of gillnets of 5 and 5% inch mesh size, which increased by 48% and 130% from 2004 to 2006 implying a trend towards use of smaller gillnet mesh sizes. The number of traps which are used in shallow vegetated areas, flood plains and river mouths to target tilapiines and riverine species decreased drastically from 5,361 traps in 2004 to only 499 traps in 2006, a decrease of 974%, a phenomenon attributed to the receding water levels which have left the shallow vegetated areas dry. A total of 17,475 fishing crafts, 72% of all fishing crafts, in the Ugandan part of the lake are still using paddles and the. number of parachute crafts is also still very high, (Le. 5,064) comprising a high proportion (21 %) of the total number of fishing. There is need to promote the use of large fishing crafts with sails or a combination of sail and outboard motor. The Mukene fishery in the Ugandan waters of Lake Victoria has remained underdeveloped with only 9% of all fishing crafts operating in this fishery. Also less than 2% of fishing crafts with sails or motor operate in this fishery which implies that it is limited to near shore waters. Effort should be made to develop this fishery as it appears to have high potential, especially in deep offshore waters which are hardly fished.

In vivo dynamics of the internal fibrous structure in smooth adhesive pads of insects.

Many insects with smooth adhesive pads can rapidly enlarge their contact area by centripetal pulls on the legs, allowing them to cope with sudden mechanical perturbations such as gusts of wind or raindrops. The short time scale of this reaction excludes any neuromuscular control; it is thus more likely to be caused by mechanical properties of the pad's specialized cuticle. This soft cuticle contains numerous branched fibrils oriented almost perpendicularly to the surface. Assuming a fixed volume of the water-filled cuticle, we hypothesized that pulls could decrease the fibril angle, thereby helping the contact area to expand laterally and longitudinally. Three-dimensional fluorescence microscopy on the cuticle of smooth stick insect pads confirmed that pulls significantly reduced the fibril angle. However, the fibril angle variation appeared insufficient to explain the observed increase in contact area. Direct strain measurements in the contact zone demonstrated that pulls not only expand the cuticle laterally, but also add new contact area at the pad's outer edge.

秸秆还田对灌溉玉米田土壤反硝化及N_2O排放的影响

运用乙炔抑制技术研究了不同施氮水平下秸秆还田对灌溉玉米田土壤反硝化反应和氧化亚氮(N2O)排放的影响。结果表明,土壤反硝化速率及N2O的排放受氮肥施用、秸秆处理方式及其交互作用的显著影响。与秸秆燃烧相比,不施氮或低施氮水平时,秸秆还田可刺激培养初期反硝化反应速率及N2O排放,增加培养期间N2O平均排放通量;高施氮水平时,秸秆还田可降低反硝化反应速率及反硝化过程中的N2O排放。秸秆还田可降低反硝化中N2O/N2的比例。

A ternary supramolecular compound of p-sulfonatocalix[8]arene with 1D channels

A ternary supramolecular complex of [Ni(bipy)(2)(H2O)](4)(C8AS)center dot 17.6(H2O) (bipy=4,4'-dimethyl-2,2'-bipyridine and C8AS = p-sulfonatocalix[8]arene) has been synthesized by a hydrothermal method and characterized by FT-IR spectroscopy, TG-DTA analysis and single crystal X-ray diffraction. In the structure. the water-soluble p-sulfonatocalix[8]arene molecule adopts a double partial cone conformation and is coordinated by four nickel atoms each of which is bonded by two 4,4'-dimethyl-2,2'-bipyridine molecules and one water molecule at the same time. The tetranuclear Subunits are stacked into an extended 3D structure with 1D water-filled channels via hydrogen bonds and C-H center dot center dot center dot pi interactions.

Anion coordination and molecular assembly in C2-substituted thiamine-anion systems: effects of the anion and molecular conformation

The compounds (het)(PtCl6)2H(2)O 1, (het)(HgI4).H2O 2 (het = 2-(alpha-hydroxyethyl)thiamine) and (hpt)(Hg2Br6) 3 (hpt = 2-(alpha-hydroxypropyl)thiamine) have been prepared and structurally characterized by X-ray crystallography in order to study the influence of the anion and molecular conformation on the formation of supramolecular architectures that adsorb anionic species. Both het and hpt molecules adopt the usual S conformation for C2-substituted thiamine but differ from the F conformation for C2-free thiamine derivatives. Two types of characteristic ligand-anion complexation are observed, being of the forms C(6')-H...anion...thiazolium-ring (in 1 and 2) and N(4'1)-H...anion...thiazolium-ring (in 3). The reaction of het with PtCl62- or HgI42- gives a 1-D double-chain in 1, consisting of two hydrogen-bonded het chains, which are cross-linked by anions through hydrogen bonding and anion...aromatic-ring interactions, or a cationic 3-D framework in 2 formed by the stacking of hydrogen-bonded sheets with anion-and-water-filled channels. In the case of 3, hydrogen-bonded hpt dimers and HgBr62- anions form alternate cation-anion columns. A comparison with the cases of C2-free thiamine-anion complexes indicates that the change in molecular conformation results in novel supramolecular assemblies in 1 and 2 and an analogous architecture in 3, which also depends on the nature of the anions.

Short-term effects of sheep excrement on carbon dioxide, nitrous oxide and methane fluxes in typical grassland of Inner Mongolia

Excrement patches of grazing animals play an important role in greenhouse gas (GHG) fluxes due to the high nitrogen (N) and available carbon (C) deposited in small areas, but little information is available for the effect of excrement in the Inner Mongolian grassland (43 26 degrees N, 116 degrees 40'E). To elucidate the effect of grazing sheep urine, fresh dung and compost on fluxes of methane (CH4), carbon dioxide (CO2), and nitrous oxide (N2O), a short-term field study (65 days) was carried out in the typical grassland of Inner Mongolia with the optimised closed chamber/GC technique. Compared with the control, cumulative net CH4 consumption decreased 36, 31, and 18% from urine, fresh dung, and compost plots, respectively; net CO2-C output increased by 6.5, 1.5, and 1.2% from urine, fresh dung, and compost treated soil, respectively; about three times as much N2O-N was emitted from urine and the fresh dung treatments during 65 days. Nitrous oxide emission was positively correlated with CO, emission (R = 0.691, P < 0.01) and water-filled pore space (R = 0.698, P < 0.01). The percentages of N2O-N loss of applied-N were 0.44 and 1.05% for urine and fresh dung, respectively. Our results suggest that in autumn in the degraded grassland of Inner Mongolia, the effect of sheep excrement may be ignored when evaluating the total GHG emissions.

AN IMPEDANCE TUBE FOR THE IN-SITU CLASSIFICATION OF BUBBLY LIQUIDS

It is well documented that the presence of even a few air bubbles in water can signifi- cantly alter the propagation and scattering of sound. Air bubbles are both naturally and artificially generated in all marine environments, especially near the sea surface. The abil- ity to measure the acoustic propagation parameters of bubbly liquids in situ has long been a goal of the underwater acoustics community. One promising solution is a submersible, thick-walled, liquid-filled impedance tube. Recent water-filled impedance tube work was successful at characterizing low void fraction bubbly liquids in the laboratory [1]. This work details the modifications made to the existing impedance tube design to allow for submersed deployment in a controlled environment, such as a large tank or a test pond. As well as being submersible, the useable frequency range of the device is increased from 5 - 9 kHz to 1 - 16 kHz and it does not require any form of calibration. The opening of the new impedance tube is fitted with a large stainless steel flange to better define the boundary condition on the plane of the tube opening. The new device was validated against the classic theoretical result for the complex reflection coefficient of a tube opening fitted with an infinite flange. The complex reflection coefficient was then measured with a bubbly liquid (order 250 micron radius and 0.1 - 0.5 % void fraction) outside the tube opening. Results from the bubbly liquid experiments were inconsistent with flanged tube theory using current bubbly liquid models. The results were more closely matched to unflanged tube theory, suggesting that the high attenuation and phase speeds in the bubbly liquid made the tube opening appear as if it were radiating into free space.

The structural effects of divalent cations and insulin on phospholipid model membranes /

It is well accepted that structural studies with model membranes are of considerable value in understanding the structure of biological membranes. Many studies with models of pure phospholipids have been done; but the effects of divalent cations and protein on these models would make these studies more applicable to intact membrane. The present study, performed with above view, is a structural analysis of divalent io~cardio1ipin complexes using the technique of x-ray diffraction. Cardiolipin, precipitated from dilute solution by divalent ionscalcium, magnesium and barium, contains little water and the structure formed is similar to the structure of pure cardiolipin with low water content. The calcium-cardiolipin complex forms a pure hexagonal type II phase that exists from 40 to 400 C. The molar ratio of calcium and cardiolipin in the complex is 1 : 1. Cardiolipin, precipitated with magnesium and barium forms two co-existing phases, lamellar and hexagonal, the relative quantity of the two phases being dependent on temperature. The hexagonal phase type II consisting of water filled channels formed by adding calcium to cardiolipin may have a remarkable permeability property in intact membrane. Pure cardiolipin and insulin at pH 3.0 and 4.0 precipitate but form no organised structure. Lecithin/cardiolipin and insulin precipitated at pH 3.0 give a pure lamellar phase. As the lecithin/cardiolipin molar ratio changes from 93/7 to SO/50, (a) the repeat distance of the lamellar changes from 72.8 X to 68.2 A; (b) the amount of protein bound increases in such a way that cardiolipin/insulin molar ratio in the complex reaches a maximum constant value at lecithin/cardiolipin molar ratio 70/30. A structural model based on these data shows that the molecular arrangement of lipid and protein is a lipid bilayer coated with protein molecules. The lipid-protein interaction is chiefly electrostatic and little, if any, hydrophobic bonding occurs in this particular system. So, the proposed model is essentially the same as Davson-Daniellifs model of biological membrane.

Construction of coordination polymers of cadmium(II) with mixed hexamethylenetetramine and terephthalate or thiocyanate ligands

Three new polymeric complexes [Cd(hmt)(SCN)(2)(H2O)(2)](n) (1), [Cd-3(mu(2)-hmt)(2)(SCN)(6)(H2O)(2)](n) (2), and [Cd-2(hmt)(2)(tP)(2)(H2O)(6)](n) (3) [hmt = hexamethylenetetramine, tp = terephthalate] have been synthesized and characterized by single crystal X-ray diffraction. Both the compounds 1 and 2 are 1-D polymers where Cd units are linked by double end-to-end thiocyanate bridges but in 2 the chain is wider containing three cadmium atoms instead of one as found in 1. In both compounds the coordination environment around cadmium atom is distorted octahedral. Compound 3 is a three-dimensional polymer having water-filled microporous channels. Both tp and brut are mu(2)-bridged. One of the acid groups of tp is coordinated in chelating bidentate and the other in monodentate fashion. Half of its Cd atoms are hexa-coordinated and the rest are hepta-coordinated. Thermogravimetric analysis and X-ray diffraction study of 3 show that its framework remains intact upon removal of water molecules. The flexibility of coordination number around cadmium atoms (six or seven) probably plays an important role in establishing the rigidity of the framework. (C) 2003 Elsevier Ltd. All rights reserved.

Characterization of Atrazine-Loaded Biodegradable Poly(Hydroxybutyrate-Co-Hydroxyvalerate) Microspheres

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de tanques de escorva utilizados em substituição à válvula-de-pé em instalações de bombeamento

A maioria das instalações de abastecimento de água utiliza bombas hidráulicas do tipo turbobombas, requerendo que o interior de sua carcaça e da tubulação de sucção esteja preenchido com água (escorvados) para que a sucção da água possa ser efetivada. O escorvamento das bombas pode ser efetuado instalando-as abaixo do reservatório de captação (bomba afogada). Quando a bomba está acima do reservatório e o escorvamento é manual, é necessário usar válvulas-de-pé, que são suscetíveis ao mau funcionamento, limitando a confiabilidade do sistema, principalmente em caso de automação. Como alternativa à válvula-de-pé, neste trabalho, foram estudados dois tanques escorva, testados no Laboratório de Hidráulica e Irrigação da FCAV/UNESP - Jaboticabal, avaliando-se situações de altura manométrica de sucção de bomba centrífuga e relações entre volume útil do tanque e volume do tubo de sucção, tendo-se concluído: a) o volume do tanque de escorva é função do volume do tubo de sucção da instalação de bombeamento e da altura manométrica de sucção; b) o volume do tanque de escorva pode ser calculado seguindo-se a Lei de Boyle, com percentagem de acréscimo que, neste estudo, foi de 10% para um modelo de tanque e de 30% para o segundo modelo.

Carbon dioxide efflux in a rhodic hapludox as affected by tillage systems in southern Brazil

Os solos agrícolas podem atuar como dreno ou fonte de C atmosférico, dependendo do sistema de manejo adotado. Este estudo foi desenvolvido em experimento de longa duração (22 anos), durante o período de 30 dias do outono, com o objetivo de avaliar o impacto de sistemas de preparo de solo (preparo convencional-PC e plantio direto-PD) nas emissões de C-CO2 de um Latossolo Vermelho distrófico, em Cruz Alta, RS. As emissões de C-CO2 do solo foram avaliadas com câmaras dinâmica (Flux Chamber 6400-09, Licor) e estática (com captação em solução alcalina), imediatamente após a colheita da soja. A temperatura e a umidade do solo foram registradas, concomitantemente com as emissões de C-CO2, por meio de sensor de temperatura e TDR manual, respectivamente, integrantes do Licor-6400. Estimou-se que, em 30 dias, uma quantidade equivalente a menos de 30 % do C aportado pelos resíduos de soja foi emitida na forma de C-CO2. As emissões de C-CO2 no solo em PD foram similares às emissões do solo em PC, independentemente do tipo de câmara utilizada. Diferenças entre sistemas de preparo quanto à emissão de C-CO2, avaliadas com a câmara dinâmica, foram verificadas somente a curto prazo (leituras diárias), com o PD apresentando maiores emissões do que o PC no início do período experimental e menores no final. A câmara dinâmica foi mais eficiente do que a estática em captar as alterações das emissões de C-CO2 em função da variação da temperatura e a porosidade preenchida por água (PPA) no solo em PD, as quais explicaram 83 e 62 % das emissões de C-CO2, respectivamente. O fator Q10, que avalia a sensibilidade da emissão de C-CO2 à temperatura do solo, foi estimado em 3,93, indicando alta sensibilidade da atividade microbiana à temperatura do solo durante o outono. As emissões de C-CO2 registradas no solo em PD com a câmara estática foram correlacionadas às da câmara dinâmica, porém com valores subestimados em relação àquela notadamente nos maiores valores de fluxo. em condições de baixa temperatura e PPA, o preparo de solo induziu limitado incremento de emissão de C-CO2.

Properties of chemically modified gelatin films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Food-web composition affects cross-ecosystem interactions and subsidies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)