Soroepidemiologia da infecção pelo Vírus da hepatite B (VHB) e pelo Vírus da hepatite C (VHC) em cirurgiões-dentistas da cidade de Belém, Pará

As hepatites virais representam um importante problema de saúde pública no Brasil e no mundo. A hepatite B e a hepatite C são as de principal interesse para os profissionais da área de saúde em função do modo de transmissão e da possibilidade de aquisição ocupacional. O presente trabalho teve por principal objetivo verificar a soroprevalência da infecção pelo Vírus da Hepatite B (VHB) e pelo Vírus da Hepatite C (VHC) em cirurgiões-dentistas e relacioná-la com os fatores de risco. Participaram do estudo 97 cirurgiões-dentistas, sendo 39 do gênero masculino e 58 do gênero feminino, no período de junho a dezembro de 2005, que atuam no município de Belém, Pará, Brasil. Os dados epidemiológicos foram obtidos por meio de inquéritos e os sorológicos por um ensaio imunoenzimático para a pesquisa de antígeno e anticorpo tanto para o VHB quanto para o VHC. O teste de Tendência foi utilizado para a análise estatística dos resultados. A prevalência do VHB foi de 6,2%, enquanto do VHC foi de 3,1% entre a população estudada. Das amostras sororreativas para os marcadores da hepatite B, a prevalência foi de 1,03% (1/97) para o anti-HBc total, 5,16% (5/97) para a presença simultânea do anti-HBc total e anti-HBs e 54,61% (53/97) para o anti-HBs. Quando comparado ao encontrado na população de doadores de sangue no Estado do Pará a prevalência do VHC na população estudada foi significativamente maior, enquanto a do VHB foi semelhante. Além disso, 37,7% (36/97) relataram terem tido algum tipo de exposição ocupacional, estando o acidente com objetos pérfuro-cortante como o mais relatado (86,1%). A medida adotada após a exposição foi sempre a lavagem com água e sabão e apenas 2,8% (1/36) dos acidentados relataram à realização de testes sorológicos. O conhecimento das normas de biossegurança e a utilização de pelo menos uma barreira de proteção individual foram relatados por todos, sendo o uso de luvas e máscara a resposta mais mencionada (96,9%). Encontravam-se imunizados contra o VHB por meio de vacina 54,61% (53/97) dos cirurgiões-dentistas, enquanto que imunes por infecção natural 5,16% (5/97). O elevado percentual de ocorrência de acidentes ocupacionais, aliado a baixa soroconversão pós-exposição dentre os cirurgiões-dentistas participantes demonstra a necessidade de se conhecer a prevalência de infecções de risco ocupacional em profissionais da área de saúde para que se adotem medidas de prevenção e controle mais eficazes contra os agentes causadores.

Soroepidemiologia da hepatite C em pacientes HIV/AIDS do serviço ambulatorial especializado do Programa DST/AIDS de Imperatriz-Maranhão

A coinfecção do vírus da hepatite C (HCV) em pessoas portadoras do vírus da imunodeficiência humana (HIV) é freqüentemente observada em virtude destes vírus apresentarem similaridade em suas rotas de transmissão, principalmente no que se refere à via parenteral. No Brasil, a prevalência depende da área geográfica considerada, variando de 8,9% a 54%. Nos coinfectados, a progressão da doença pelo HCV é usualmente mais agressiva e apresenta alto nível de viremia, como também, há um risco maior de associação do HCV com a cirrose hepática e/ou hepatocarcinoma. O objetivo do presente estudo foi estimar a prevalência de HCV e fatores de risco associados à coinfecção em pessoas soropositivas para HIV na cidade de Imperatriz Maranhão. Participaram 249 pacientes soropositivos para HIV atendidos no SAE do Programa Municipal de DST/AIDS de Imperatriz do Maranhão. Foi coletado de cada voluntário 10 mL de sangue periférico para realização do teste sorológico, onde foi realizada pesquisa de anticorpos IgG HCV específicos e testes de Biologia Molecular (RT-PCR) para pesquisa do RNA viral e genotipagem. Entre os pacientes observou-se similaridade entre a frequência dos gêneros, 49% masculino e 51% feminino, com média de idade de 40 anos. Foi observado que 98% possuem baixo nível de instrução e 63% possuem renda mensal de até um salário mínimo. A soroprevalência do anti-HCV foi de 2.4% (6/249). Na comparação dos fatores de risco pesquisados entre os pacientes reagentes e não reagentes na pesquisa sorológica de anticorpos HCV específicas demonstraram que a presença de tatuagens e piercing foi o único fator que se mostrou significantes, sendo mais frequente nos reagentes. Esse foi o primeiro estudo que investiga a coinfecção HIV e HCV na cidade de Imperatriz, Maranhão e a identificação de pacientes coinfectados foi de fundamental importância para o serviço que a partir de então irá realizar o acompanhamento destes pacientes.

Gerenciamento dos resíduos de serviços de saúde da Unidade de Terapia Intensiva do Pronto Socorro do Hospital das Clínicas da Faculdade de Medicina de Botucatu – UNESP

Health care waste (HCW) is the type of waste that results from activities performed in health care services during care provision to humans or animals. Presently, according to RDC 306/04, issued in 2004 by Anvisa, and Resolution no. 358/05, by CONAMA, waste groups have the following classification: Group A (biological waste), Group B (chemical waste), Group C (waste containing radionucleotides), Group D (common waste) and Group E (piercing and cutting waste). In Brazil, 149 tons of wastes are collected every day, and HCW corresponds to approximately 1% to 3 % of that total. An efficient way to adequately manage HCW is through the Health Care Waste Management Plan (HCWMP), and it is possible to reduce the risk posed by certain materials in addition to ensuring disposal in an ecologically correct and economical fashion. According to the Pan-American Health Organization (PAHO), the management process enables health care establishments to adequately manage waste. Hence, there is greater control and reduction in the health risks caused by infectious or special waste, in addition to facilitated recycling, treatment, storage, transport and final disposal of solid hospital waste in an environmentally safe fashion. To evaluate the management of HCW of Groups A and D from the Intensive Care Unit of the University Emergency Hospital - FMB - UNESP in the city of Botucatu according to the guidelines presently in force. The waste flow was followed up, and during four random days in the month of September 2011, waste was quantified by estimating daily and monthly values, according to its classification. : In 2011, the University hospital has produced an average of 57,676.8 kg/month of biological and common waste. By adding Groups A and D, during the four days, approximately 209.8 Kg of waste (202.2 Kg of Group A and 7.6 Kg of Group D) were produced in the establishment under study, which... (Complete abstract click electronic access below)

Evaluation of corrosion resistance and cytotoxicity of electrodeposited gold on various types of intermediate layers

Gold plated surfaces are widely applied in several technical and decorative fields. The two main issues regarding the discussion on the field of precious metal coatings concern the increase in the use of thinner gold layers and 'Ni free' substrates. In order to ensure the quality of the final products, the effects of the plated surfaces on their performance require thorough and accurate research. In this paper, the corrosion resistance of gold plated nickel, copper and bronze was investigated by electrochemical methods specifically potentiodynamic polarisation and electrochemical impedance spectroscopy in phosphate buffered saline. The cytotoxicity of the gold plated substrates was also evaluated and compared. The results showed that the substrate related to the best corrosion resistance and cytotoxicity among the tested ones was bronze, and the one with the lowest performance was nickel.

Brazilian blood donation eligibility criteria for dermatologic patients

A focused and commented review on the impact of dermatologic diseases and interventions in the solidary act of donating blood is presented to dermatologists to better advise their patients. This is a review of current Brazilian technical regulations on hemotherapeutic procedures as determined by Ministerial Directive #1353/2011 by the Ministry of Health and current internal regulations of the Hemotherapy Center of Ribeirão Preto, a regional reference center in hemotherapeutic procedures. Criteria for permanent inaptitude: autoimmune diseases (>1 organ involved), personal history of cancer other than basal cell carcinoma, severe atopic dermatitis or psoriasis, pemphigus foliaceus, porphyrias, filariasis, leprosy, extra pulmonary tuberculosis or paracoccidioidomycosis, and previous use of etretinate. Drugs that impose temporary ineligibility: other systemic retinoids, systemic corticosteroids, 5-alpha-reductase inhibitors, vaccines, methotrexate, beta-blockers, minoxidil, anti-epileptic, and anti-psychotic drugs. Other conditions that impose temporary ineligibility: occupational accident with biologic material, piercing, tattoo, sexually transmitted diseases, herpes, and bacterial infections, among others. Discussion: Thalidomide is currently missing in the teratogenic drugs list. Although finasteride was previously considered a drug that imposed permanent inaptitude, according to its short halflife current restriction of 1 month is still too long. Dermatologists should be able to advise their patients about proper timing to donate blood, and discuss the impact of drug withdrawal on treatment outcomes and to respect the designated washout periods.

Securitization and Special Purpose Vehicles in an International Setting: a Systemic View

The present work tries to display a comprehensive and comparative study of the different legal and regulatory problems involved in international securitization transactions. First, an introduction to securitization is provided, with the basic elements of the transaction, followed by the different varieties of it, including dynamic securitization and synthetic securitization structures. Together with this introduction to the intricacies of the structure, a insight into the influence of securitization in the financial and economic crisis of 2007-2009 is provided too; as well as an overview of the process of regulatory competition and cooperation that constitutes the framework for the international aspects of securitization. The next Chapter focuses on the aspects that constitute the foundations of structured finance: the inception of the vehicle, and the transfer of risks associated to the securitized assets, with particular emphasis on the validity of those elements, and how a securitization transaction could be threatened at its root. In this sense, special importance is given to the validity of the trust as an instrument of finance, to the assignment of future receivables or receivables in block, and to the importance of formalities for the validity of corporations, trusts, assignments, etc., and the interaction of such formalities contained in general corporate, trust and assignment law with those contemplated under specific securitization regulations. Then, the next Chapter (III) focuses on creditor protection aspects. As such, we provide some insights on the debate on the capital structure of the firm, and its inadequacy to assess the financial soundness problems inherent to securitization. Then, we proceed to analyze the importance of rules on creditor protection in the context of securitization. The corollary is in the rules in case of insolvency. In this sense, we divide the cases where a party involved in the transaction goes bankrupt, from those where the transaction itself collapses. Finally, we focus on the scenario where a substance over form analysis may compromise some of the elements of the structure (notably the limited liability of the sponsor, and/or the transfer of assets) by means of veil piercing, substantive consolidation, or recharacterization theories. Once these elements have been covered, the next Chapters focus on the regulatory aspects involved in the transaction. Chapter IV is more referred to “market” regulations, i.e. those concerned with information disclosure and other rules (appointment of the indenture trustee, and elaboration of a rating by a rating agency) concerning the offering of asset-backed securities to the public. Chapter V, on the other hand, focuses on “prudential” regulation of the entity entrusted with securitizing assets (the so-called Special Purpose vehicle), and other entities involved in the process. Regarding the SPV, a reference is made to licensing requirements, restriction of activities and governance structures to prevent abuses. Regarding the sponsor of the transaction, a focus is made on provisions on sound originating practices, and the servicing function. Finally, we study accounting and banking regulations, including the Basel I and Basel II Frameworks, which determine the consolidation of the SPV, and the de-recognition of the securitized asset from the originating company’s balance-sheet, as well as the posterior treatment of those assets, in particular by banks. Chapters VI-IX are concerned with liability matters. Chapter VI is an introduction to the different sources of liability. Chapter VII focuses on the liability by the SPV and its management for the information supplied to investors, the management of the asset pool, and the breach of loyalty (or fiduciary) duties. Chapter VIII rather refers to the liability of the originator as a result of such information and statements, but also as a result of inadequate and reckless originating or servicing practices. Chapter IX finally focuses on third parties entrusted with the soundness of the transaction towards the market, the so-called gatekeepers. In this respect, we make special emphasis on the liability of indenture trustees, underwriters and rating agencies. Chapters X and XI focus on the international aspects of securitization. Chapter X contains a conflicts of laws analysis of the different aspects of structured finance. In this respect, a study is made of the laws applicable to the vehicle, to the transfer of risks (either by assignment or by means of derivatives contracts), to liability issues; and a study is also made of the competent jurisdiction (and applicable law) in bankruptcy cases; as well as in cases where a substance-over-form is performed. Then, special attention is also devoted to the role of financial and securities regulations; as well as to their territorial limits, and extraterritoriality problems involved. Chapter XI supplements the prior Chapter, for it analyzes the limits to the States’ exercise of regulatory power by the personal and “market” freedoms included in the US Constitution or the EU Treaties. A reference is also made to the (still insufficient) rules from the WTO Framework, and their significance to the States’ recognition and regulation of securitization transactions.

Simulazione del volo di un catamarano con hydrofoil

Velocity prediction program per catamarano con V-foil anteriori e T-foil posteriori, simulazione di volo 3DOF con analisi della stabilità e dei carichi applicati.

An anatomical investigation of the cervicothoracic ganglion

Anatomical variability within the autonomic nervous system has long been accepted. This study evaluated the anatomical variability of the cervicothoracic ganglion (CTG) according to its form and, in addition, provided precise measurements between the CTG and the anterior tubercle of the transverse process of the sixth cervical vertebra (C6TP), the first costovertebral articulation, and the vertebral artery. Forty-two adult cadavers were dissected, 22 male and 20 females. Five main forms of CTG were documented; spindle (31.9%), dumbbell (23.2%), truncated (21.7%), perforated (14.5%), and inverted-L (8.7%). The means for length, width, and thickness of the CTG were 18.5 mm, 8.2 mm, and 4.5 mm, respectively. The dimensions were found to be slightly larger in the males than females and on the left sides as compared to the right. The mean shortest distance between the CTGs and the vertebral artery was found to be 2.8 mm, whilst the mean shortest distances to C6TP was 25.7 mm and to the first costovertebral articulation was 1.7 mm. There is great variability in the morphology of the CTG with five common forms consistently seen. The relation to the vertebral artery may influence the form of the ganglion. Two previously undocumented forms are recorded; the truncated which describes the important juxtaposition of the CTG and the vertebral artery and the perforated which describes the piercing of the ganglion itself by the artery. The findings are considered to be of clinical importance to anesthetists, surgeons, neurosurgeons, and anatomists.

Shear band evolution in Zr/Hf-based bulk metallic glasses under static and dynamic indentations

Bulk metallic glasses (BMGs) exhibit superior mechanical properties as compared with other conventional materials and have been proposed for numerous engineering and technological applications. Zr/Hf-based BMGs or tungsten reinforced BMG composites are considered as a potential replacement for depleted uranium armor-piercing projectiles because of their ability to form localized shear bands during impact, which has been known to be the dominant plastic deformation mechanism in BMGs. However, in conventional tensile, compressive and bending tests, limited ductility has been observed because of fracture initiation immediately following the shear band formation. To fully investigate shear band characteristics, indentation tests that can confine the deformation in a limited region have been pursued. In this thesis, a detailed investigation of thermal stability and mechanical deformation behavior of Zr/Hf-based BMGs is conducted. First, systematic studies had been implemented to understand the influence of relative compositions of Zr and Hf on thermal stability and mechanical property evolution. Second, shear band evolution under indentations were investigated experimentally and theoretically. Three kinds of indentation studies were conducted on BMGs in the current study. (a) Nano-indentation to determine the mechanical properties as a function of Hf/Zr content. (b) Static Vickers indentation on bonded split specimens to investigate the shear band evolution characteristics beneath the indention. (c) Dynamic Vickers indentation on bonded split specimens to investigate the influence of strain rate. It was found in the present work that gradually replacing Zr by Hf remarkably increases the density and improves the mechanical properties. However, a slight decrease in glass forming ability with increasing Hf content has also been identified through thermodynamic analysis although all the materials in the current study were still found to be amorphous. Many indentation studies have revealed only a few shear bands surrounding the indent on the top surface of the specimen. This small number of shear bands cannot account for the large plastic deformation beneath the indentations. Therefore, a bonded interface technique has been used to observe the slip-steps due to shear band evolution. Vickers indentations were performed along the interface of the bonded split specimen at increasing loads. At small indentation loads, the plastic deformation was primarily accommodated by semi-circular primary shear bands surrounding the indentation. At higher loads, secondary and tertiary shear bands were formed inside this plastic zone. A modified expanding cavity model was then used to predict the plastic zone size characterized by the shear bands and to identify the stress components responsible for the evolution of the various types of shear bands. The applicability of various hardness—yield-strength ( H −σγ ) relationships currently available in the literature for bulk metallic glasses (BMGs) is also investigated. Experimental data generated on ZrHf-based BMGs in the current study and those available elsewhere on other BMG compositions were used to validate the models. A modified expanding-cavity model, employed in earlier work, was extended to propose a new H −σγ relationship. Unlike previous models, the proposed model takes into account not only the indenter geometry and the material properties, but also the pressure sensitivity index of the BMGs. The influence of various model parameters is systematically analyzed. It is shown that there is a good correlation between the model predictions and the experimental data for a wide range of BMG compositions. Under dynamic Vickers indentation, a decrease in indentation hardness at high loading rate was observed compared to static indentation hardness. It was observed that at equivalent loads, dynamic indentations produced more severe deformation features on the loading surface than static indentations. Different from static indentation, two sets of widely spaced semi-circular shear bands with two different curvatures were observed. The observed shear band pattern and the strain rate softening in indentation hardness were rationalized based on the variations in the normal stress on the slip plane, the strain rate of shear and the temperature rise associated with the indentation deformation. Finally, a coupled thermo-mechanical model is proposed that utilizes a momentum diffusion mechanism for the growth and evolution of the final spacing of shear bands. The influence of strain rate, confinement pressure and critical shear displacement on the shear band spacing, temperature rise within the shear band, and the associated variation in flow stress have been captured and analyzed. Consistent with the known pressure sensitive behavior of BMGs, the current model clearly captures the influence of the normal stress in the formation of shear bands. The normal stress not only reduces the time to reach critical shear displacement but also causes a significant temperature rise during the shear band formation. Based on this observation, the variation of shear band spacing in a typical dynamic indentation test has been rationalized. The temperature rise within a shear band can be in excess of 2000K at high strain rate and high confinement pressure conditions. The associated drop in viscosity and flow stress may explain the observed decrease in fracture strength and indentation hardness. The above investigations provide valuable insight into the deformation behavior of BMGs under static and dynamic loading conditions. The shear band patterns observed in the above indentation studies can be helpful to understand and model the deformation features under complex loading scenarios such as the interaction of a penetrator with armor. Future work encompasses (1) extending and modifying the coupled thermo-mechanical model to account for the temperature rise in quasistatic deformation; and (2) expanding this model to account for the microstructural variation-crystallization and free volume migration associated with the deformation.

A tritrophic signal that attracts parasitoids to host-damaged plants withstands disruption by non-host herbivores

Background: Volatiles emitted by herbivore-infested plants are highly attractive to parasitoids and therefore have been proposed to be part of an indirect plant defense strategy. However, this proposed function of the plant-provided signals remains controversial, and it is unclear how specific and reliable the signals are under natural conditions with simultaneous feeding by multiple herbivores. Phloem feeders in particular are assumed to interfere with plant defense responses. Therefore, we investigated how attack by the piercing-sucking cicadellid Euscelidius variegatus influences signaling by maize plants in response to the chewing herbivore Spodoptera littoralis.Results: The parasitoid Cotesia marginiventris strongly preferred volatiles of plants infested with its host S. littoralis. Overall, the volatile emissions induced by S. littoralis and E. variegatus were similar, but higher levels of certain wound-released compounds may have allowed the wasps to specifically recognize plants infested by hosts. Expression levels of defense marker genes and further behavioral bioassays with the parasitoid showed that neither the physiological defense responses nor the attractiveness of S. littoralis infested plants were altered by simultaneous E. variegatus attack.Conclusions: Our findings imply that plant defense responses to herbivory can be more robust than generally assumed and that ensuing volatiles convey specific information about the type of herbivore that is attacking a plant, even in complex situations with multiple herbivores. Hence, the results of this study support the notion that herbivore-induced plant volatiles may be part of a plant's indirect defense stratagem. © 2010 Erb et al; licensee BioMed Central Ltd.

An EAR-motif-containing ERF transcription factor affects herbivore-induced signaling, defense and resistance in rice

Ethylene responsive factors (ERFs) are a large family of plant-specific transcription factors that are involved in the regulation of plant development and stress responses. However, little to nothing is known about their role in herbivore-induced defense. We discovered a nucleus-localized ERF gene in rice (Oryza sativa), OsERF3, that was rapidly up-regulated in response to feeding by the rice striped stem borer (SSB) Chilo suppressalis. Antisense and over-expression of OsERF3 revealed that it positively affects transcript levels of two mitogen-activated protein kinases (MAPKs) and two WRKY genes as well as concentrations of jasmonate (JA), salicylate (SA) and the activity of trypsin protease inhibitors (TrypPIs). OsERF3 was also found to mediate the resistance of rice to SSB. On the other hand, OsERF3 was slightly suppressed by the rice brown planthopper (BPH) Nilaparvata lugens (Stål) and increased susceptibility to this piercing sucking insect, possibly by suppressing H2O2 biosynthesis. We propose that OsERF3 affects early components of herbivore-induced defense responses by suppressing MAPK repressors and modulating JA, SA, ethylene and H2O2 pathways as well as plant resistance. Our results also illustrate that OsERF3 acts as a central switch that gears the plant’s metabolism towards an appropriate response to chewing or piercing/sucking insects.

Non-sexual household transmission of HCV infection: A cohort study

Objective. This study was designed to determine the prevalence and incidence of HCV infection among non-sexual household contacts of HCV-infected women and to describe the association between HCV infection and potential household risk factors in order to examine whether non-sexual household contact is a route of transmission for HCV infection. ^ Methods. A baseline prevalence survey included 409 non-sexual household contacts of 241 HCV-infected index women in the Houston area from 1994 to 1997. A total of 470 non-sexual household contacts with no evidence of HCV infection at baseline investigation were re-assessed approximately three years after baseline enrollment. Information on potential risk factors was collected through face to face interviews and blood samples were tested for anti-HCV with ELISA-2 and Matrix/RIBA-2. The relationships between HCV infection and potential risk factors were examined by using univariate and multivariate logistic regression analyses. ^ Results. The overall prevalence of anti-HCV positivity among 409 non-sexual household contacts was 4.4%. The highest prevalence of anti-HCV was found in parents (19.5%), followed by siblings (8.1%) and other relatives (5.6%); the children had the lowest prevalence of anti-HCV (1.2%). The univariate analysis showed that IDU, blood transfusion, tattoos, sexual contact with injecting drug users, more than 3 sexual partners in a lifetime, history of a STD, incarceration, previous hepatitis, and contact with hepatitis patients were significantly associated with HCV infection, however, sharing razors, nail clippers, toothbrushes, gum, food or beds with HCV-infected women, and history of dialysis, health care job, body piercing, and homosexual activities were not. Multivariate analysis found that IDU (OR = 221.7 with 95% CI of 22.8 to 2155.7) and history of a STD (OR = 11.7 with 95% CI of 1.2 to 113.1) were the only variables significantly associated with HCV infection. No such associations remained for other risk factors. The three-year cumulative incidence of anti-HCV among 352 non-sexual household contacts of HCV-infected women was zero. ^ Conclusion. This study has provided no evidence that non-sexual household contact is a likely route of transmission for HCV infection. The risk of sharing razors, nail clippers, toothbrushes, gum, food and/or beds with HCV-infected women is not evident and has not been shown to be the likely mode for HCV spread among family members. This study does suggest that IDU is the likely route of transmission for most HCV infection. Association also has been shown independently with a history of STD. The prevalence of anti-HCV among non-sexual household contacts was low. Exposure to common parenteral risk factors and sexual transmission between sexual partners may account for HCV spread among household members of HCV-infected persons. ^

Análise numérico-experimental de blindagens balísticas

O desenvolvimento técnico e científico em torno das blindagens tem procurado contrariar o constante aperfeiçoamento dos projéteis e do seu poder de penetração. Para cumprir este objetivo, é necessário recorrer a soluções inovadoras tanto em termos dos materiais utilizados no fabrico, como ao nível do formato da própria blindagem. Com este trabalho pretende-se dar os primeiros passos na produção e teste de materiais em situação de tiro real, bem como na modelação e simulação dos mesmos com o objetivo de adquirir capacidades, técnicas e procedimentos para trabalhos futuros. O trabalho teve início com a realização da pesquisa bibliográfica sobre vários aspetos desde o fabrico até à avaliação do desempenho de blindagens balísticas. O trabalho teórico desta tese incidiu na modelação por elementos finitos dos elementos balísticos (proteções e projétil) tendo como objetivo a simulação numérica da sua interação em condições de impacto. O trabalho experimental foi realizado no campo de tiro da Escola das Armas onde foram testados os alvos com os materiais compósitos produzidos e com placas de alumínio, com diferentes combinações. A análise de resultados permitiu comparar e avaliar as diferenças entre as estimativas teóricas e as suas limitações com as observações experimentais do tiro real.

Avaliação do comportamento mecânico de blindagens balísticas

Desde os primórdios da história, o ser humano tem procurado criar e aperfeiçoar mecanismos que o protejam das agressões do inimigo. Neste sentido, o desenvolvimento técnico e científico em torno das blindagens tem procurado contrariar o constante aperfeiçoamento dos projécteis e do seu poder de penetração. De facto, as blindagens são muitas vezes desenvolvidas para fins específicos de forma a aumentar o seu desempenho na protecção de pessoas e equipamentos. Para cumprir este objectivo, é muitas vezes necessário recorrer a soluções inovadoras, tanto em termos dos materiais e da respectiva qualidade/quantidade utilizada no fabrico, como ao nível do formato da própria blindagem. A avaliação do desempenho das blindagens é extremamente importante para garantir a segurança do utilizador nas mais diversas actividades, tanto militares, como civis. No entanto, esta informação é considerada muitas vezes sigilosa pelo risco que representa para a sociedade militar e civil, e/ou por fortes interesses económicos por parte das empresas que comercializam estes equipamentos de protecção. Quando realizada, esta avaliação restringe-se geralmente a aspectos meramente qualitativos, tais como a verificação do dano produzido pelo projéctil. No entanto, não é usual avaliar o valor da energia remanescente de impacto que, não sendo absorvida pela blindagem, é transmitida ao utilizador ou equipamento. Por outras palavras, será a não penetrabilidade da blindagem uma condição suficiente para garantir a segurança? A presente investigação incidiu no desenvolvimento de uma metodologia experimental inovadora que permita quantificar a energia remanescente de impacto, transmitida através da blindagem ao utilizador, a quando da interacção com o projéctil. Para permitir realizar os ensaios balísticos em condições laboratoriais controladas foi desenvolvido um sistema de impulsão electromagnética que possibilita a ausência de ruído, de fumos ou clarões, consentindo o disparo de diferentes tipos de projécteis com ajuste contínuo da energia de impacto. Para testar a metodologia desenvolvida foram utilizadas blindagens representativas das actividades do Exército Português. De facto, o contributo do presente trabalho permite preencher uma lacuna na avaliação de blindagens, apresentando-se como uma mais-valia, na medida que poderá ser utilizado futuramente pelo Exército Português para uma avaliação independente de blindagens.

Piercings orais: implicações e consequências

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz