Processo de obtenção de vinagre de gengibre

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aspectos metalúrgicos de revestimentos em dutos depositados com a superliga de níquel ERNiCrMo-4 pelos processos MIG convencional e MIG com adição de arame frio

Este trabalho estuda o perfil metalúrgico de revestimentos em dutos depositados pelos processos MIG C e MIG AF. A indústria petroquímica, e outras que utilizam dutos como meio de transporte de seus insumos, depara-se com um grande desafio: como aumentar a vida útil desses dutos em um ambiente severo de trabalho. No caso específico da petroquímica, os dutos servem como meio de transporte para petróleo e gás, que são produtos extremamente agressivos às paredes internas desses tubos que sofrem degradação por corrosão causada, principalmente, pela composição química, pressão e temperatura desses produtos. Nesse contexto a soldagem de revestimentos realizada com ligas à base de Níquel, torna-se uma excelente opção para a construção, reparo e manutenção de equipamentos cuja aplicação seja voltada a ambientes severos de trabalho, tornando possível aperfeiçoar as características requeridas, como por exemplo, a resistência à corrosão. É nesse cenário que surge o mote para a realização desta pesquisa, baseada em trabalhos que indicam que o processo de soldagem MIG/MAG com o da adição de arame frio possui a finalidade de avaliar as características metalúrgicas do revestimento em dutos depositados pelo processo derivativo MIG convencional – MIG-C e MIG com adição de arame frio – MIG AF – utilizando a liga de Níquel ERNiCrMo-4 em dutos de aço carbono. As soldas foram depositadas em dutos de diâmetro de 228,6 mm, formando uma camada de revestimento interno de quatro passes, divididos em três segmentos da circunferência do duto, em três diferentes energias de soldagem: 1,1; 0,9 e 0,7 kJ/mm. Desses segmentos retiraram-se corpos de prova dos dutos para a produção das amostras. Após a metalografia, realizada nas amostras, seguiu-se com a análise e caracterização ao microscópio óptico, microscópio eletrônico de varredura e ensaio de microdureza. Os revestimentos apresentaram excelente qualidade superficial para todos os pacotes operacionais aplicados na obtenção das soldas. As análises das regiões estudadas: metal de base; zona parcialmente misturada e zona termicamente afetada, mostraram-se compatíveis com os da literatura estudada, tanto para o MIG com adição de arame frio, quanto para o convencional. Na ZTA, foram observados valores de Tungstênio em torno de 1,0%, o aumento dos níveis de dureza foi creditado a esse fato. Os resultados de microdureza indicaram que para ambos os casos, MIG C e MIG AF, nas 4 regiões analisadas ocorreram de maneira semelhante, sendo a região da ZTA a que apresentou maiores valores na faixa de 400 a 500 HV, enquanto que nas demais regiões a faixa ficou entre 250 a 350 HV. Os resultados indicam que o processo com arame frio, MIG AF, mostrou-se tão eficiente quanto o convencional, MIG C. A energia de soldagem aumentou a diluição de Fe no metal de solda. Precipitados ricos em Mo e Cr foram encontrados no metal de solda.

Os sentidos da ciência no cenário industrial: a inovação tecnológica e suas implicações na política de educação superior

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Greening the work force in Brazilian hotels: The role of environmental training

BACKGROUND: Organizations are increasingly required to reduce their environmental impact through the adoption of environmental management, which requires the support of human resource practices.OBJECTIVE: The objective of this study is to determine whether human resource management practices, especially training, are supporting environmental management practices at four hotels located in Brazil.METHODS: This research is qualitative, based on the analysis of four hotels in Brazil.RESULTS: Based on the systematized empirical evidence collected from four hotels (Hotels A, B, C, and D), it can be concluded that: (1) human resource management is still not fully aligned with environmental objectives at the hotels studied; (2) only Hotel B has implemented environmental management practices and aligned with human resource management in a more developed manner, which may indicate that these two variables of analysis could have interrelations; (3) environmental training as a human resource management practice was verified in all hotels analyzed.CONCLUSIONS: The greening of human resources practices is not fully aligned with environmental objectives in the hotels studied. If these hotels really wish to "go green," environmental training will be necessary. Hotel stakeholders play a major role in implementing the greening of the hotel industry.

Avaliação mecânica da colagem estrutural entre compósitos poliméricos e materiais metálicos utilizados em dutos petroquímicos

The development of technology for structural composites has as one of its ends form a set of materials that combine high values of mechanical strength and stiffness and low density. Today, companies like Embraer and PETROBRAS and research institutions like NASA, working with these materials with recognized advantages in terms of weight gain, increased performance and low corrosion. We have developed a systematic study to determine the bond strength between composite carbon fiber / epoxy and fiberglass / epoxy laminate both bonded to a carbon steel which are widely used in the petrochemical industry and repair. For morphological evaluation and bonding between materials of different natures, ultrasound analysis, optical microscopy and stereoscopy were performed. To simulate actual conditions, the composites were subjected to conditioning by using heat shock temperatures from -50 to 80 ° C for 1000 cycles for composite carbon fiber / epoxy composites and 2000 cycles for fiberglass / epoxy . The use of composites studied here proved to be efficient to perform repairs in metallic pipes with application petrochemical, as when exposed to sudden changes of temperature (-50 ° to 80 ° C) cycling at 1000 to 2000 times, its mechanical properties (shear and tensile) practically do not change

Estudo de caso: aplicação do método DMAIC-White Belt- na redução de latas amassadas em uma produção de leite em pó

This work consists of the implementation of the steps Define, Measure , Analyze , Improve and Control ( DMAIC ) to develop a Six Sigma project in an industry the food industry. The objective was to demonstrate a potential for reducing the occurrence of crushed cans in potting milk powder industry in a White Belt project. The food industry accounts for about 9 % of Brazil's gross domestic product ( GDP ), generating thousands of jobs . Among the major sectors of the food industry is the manufacturing sector of milk , occupies approximately 10 % of the total turnover of the food industry . Brazil is considered today one of the eight largest producers of milk powder in the world. The milk powder is packed , mostly for aluminum cans that are lined internally with varnishes and other materials to protect the milk of metals from aluminum. When the cans are dented food protection is compromised and may lead ingestion causing dis-eases such as botulism. Aiming to solve the problem of dented cans methodology was used as a case study with a quantitative approach through the DMAIC method. Some quality tools used in each step of the project as brainstorming , cause and effect diagram , flowchart , ef-fort and impact matrix, 5W1H , among other Pareto diagram is presented . A survey about the disposal of cans in the company verifying a mean loss and, from this histor-ical , a goal loss was calculated was performed . With the target set we calculated the annual saving design . During application of DMAIC was found that the highest rate of loss occurred in transportation between the factory and the factory that fills cans milk . Several actions were taken to resolve problems that resulted in dented cans and the first two months of phase control it was found that the smaller losses calculated target resulting in a saving for the company. The short time of implementa-tion of the Improve phase did not allow a more detailed a ...

Avaliação da usinagem do INCONEL 718

The nickel superalloys are known as being a material with poor machinability, they have some properties like high hardness, good resistance at high temperature, tendency to weld with the tool material at high temperature, etc. In the aerospace, biomedical and petrochemical industry, are increasing the need to use materials that resist to aggressive process and environment. In these uses, it has increased the use of nickel-based superalloys like Inconel 718 and consequently the need to research new techniques and tools to improve the machinability of this material. For the superalloys and resistant alloys at high temperatures is considered that the difficulty in the machining regards to the combination of the relatively high cutting forces and high temperatures that grow during the machine process, causing deformation or breakage of the cutting tool. This work purpose is to develop the study of the machining of external cylindrical turning of the nickel based alloy Inconel 718, using ceramic tools, seeking the optimization of machining this alloy, looking to provide real productive increases without the need of investments in new production means. The machining test were accomplished using commercials hard metal tools and the results were compared each other to find the best tool and the best parameter. The conclusion is that the tool TNMG160408-23 -class 1005- was the better one, when used with the parameter 60_15_08

Comparação das águas dos rios Jaguari e Atibaia na região de lançamento de efluente de indústria petroquímica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Disponibilidade de "açúcares de adição" no Brasil: distribuição, fontes alimentares e tendência temporal

OBJETIVOS: Estimar o consumo de "açúcar de adição" pela população brasileira, nos estratos regionais e socioeconômicos, destacando suas principais fontes alimentares e verificar a tendência do seu consumo nas últimas décadas. MÉTODOS: Contou-se com informações das Pesquisas de Orçamentos Familiares a partir da década de 80 sobre o tipo e a quantidade de alimentos e bebidas adquiridos pelas famílias brasileiras. Os indicadores analisados foram: % das calorias de açúcar no total calórico da dieta e % calórico das frações de açúcar de mesa e de açúcar adicionado aos alimentos pela indústria/kcal açúcar da dieta. RESULTADOS: Em 2002/03, 16,7% das calorias totais eram provenientes de "açúcar de adição" e sua participação mostrou-se elevada em todos os estratos regionais e de renda. A razão açúcar de mesa/açúcar adicionado pela indústria se inverte com o aumento da renda. A participação do açúcar de mesa nos últimos 15 anos foi reduzida, enquanto a contribuição do açúcar adicionado aos alimentos dobrou, especialmente por meio do consumo de refrigerantes e biscoitos. CONCLUSÕES: O consumo de açúcar no Brasil excede largamente a recomendação da OMS e verificou-se importante alteração nas fontes de consumo.

A case-comparison interview study of brain tumors and employment in occupations with presumed electric and magnetic field exposures

Results from epidemiologic studies suggest that persons working in occupations with presumed electric and magnetic field (EMF) exposures are at increased risk of brain cancer. This study utilized data from a completed, population-based, interview case-control study of central nervous system (CNS) tumors and employment in the petrochemical industry to test the hypothesis that employment in EMF-related occupations increases CNS tumor risk. A total of 375 male residents of the Texas-Louisiana Gulf Coast Area, age 20 to 79, with primary neuroglial CNS tumors diagnosed during the period 1980-84 were identified. A population-based comparison group of 450 age, race and geographically matched males was selected. Occupational histories and potential risk factor data were collected via personal interviews with study subjects or their next-of-kin.^ Adjusted odds ratios were less than 1.0 for persons ever employed in an electrical occupation (OR = 0.65; 95% CI = 0.40-1.09) or whose usual occupation was electrical (OR = 0.76; 95% CI = 0.33-1.73). Relative risk estimates did not increase significantly as time since first employment or duration of employment increased. Examination of CNS tumor risk by high (OR = 0.80), medium (OR = 0.88) and low (OR = 0.45) exposure categories for persons whose usual occupation was electrical did not indicate a dose-response pattern. In addition, the mean age of exposed cases was not significantly younger than that for unexposed cases. Analysis of risk by probability of exposure to EMFs showed non-significant elevations in the adjusted odds ratio for definite exposed workers defined by their usual occupation (OR = 1.78; 95% CI = 0.70-4.51) and ever/never employed status (OR = 1.54; 95% CI = 0.17-4.91).^ These findings suggest that employment in occupations with presumed EMF exposures does not increase CNS tumor risk as was suggested by previous investigations. The results of this study also do not support the EMF-tumor promotion hypothesis. ^

Modelo de gestión de costes medioambientales para el sector petroquímico venezolano

El crecimiento económico ha producido mejoras en el nivel de vida de la población que muchas veces tienen efectos medioambientales negativos en el largo plazo. Ante esta problemática, surge la necesidad a nivel empresarial de enmarcarse en un modelo de desarrollo sostenible que combine los objetivos de crecimiento económico con los de protección medioambiental. Esta situación puede representar altos costes para las empresas del sector petroquímico venezolano, debido al elevado riesgo de sus operaciones y al conjunto de regulaciones legales vigentes en materia medioambiental. Por lo tanto, el objetivo de la presente investigación ha sido proponer un modelo para la gestión de costes medioambientales de dicho sector fundamentado en la ecoeficiencia. Se planteó una investigación proyectiva, desde un enfoque holístico. Se utilizó un diseño de investigación univariable, transeccional contemporáneo, de fuente mixta. Univariable, porque se enfoca en la gestión de costes medioambientales como único evento a modificar. Transeccional contemporáneo, porque el evento se estudia en la actualidad y la medición de los datos se realiza en un solo momento. De fuente mixta, porque se combinó un diseño documental con un diseño de campo. Se utilizó un diseño documental para el análisis comparativo de las normativas de registro y control de costes medioambientales propuestas por organismos internacionales, mediante la aplicación de una matriz de análisis de categorías emergentes. Para el diagnóstico de la gestión de costes medioambientales en el sector petroquímico venezolano, se utilizó un diseño de campo en las empresas del sector que operan en la región zuliana. Para ello se aplicó un cuestionario con 100 ítems en escala Likert y 6 preguntas de opción múltiple. Dicho cuestionario fue validado mediante la revisión de expertos y se determinó su confiablidad a través del coeficiente alfa de Cronbach. Los resultados muestran que los principales asuntos tratados por las normativas analizadas pueden agruparse en seis temas: alcance de la contabilidad de gestión medioambiental, clasificación, tratamiento contable, asignación, informes de costes medioambientales e indicadores de gestión. Se evidenció que las guías de aplicación de la contabilidad de gestión medioambiental abordan todos los temas identificados pero no hay uniformidad en los criterios asumidos. Por el contrario, las normativas en el ámbito de la contabilidad financiera consideran principalmente los aspectos relacionados con el tratamiento contable de los costes medioambientales y su inclusión en los estados financieros. En cuanto a la gestión de costes medioambientales que realizan las empresas del sector petroquímico venezolano, se evidenció su limitación por la escasa consideración de criterios de ecoeficiencia y la poca aplicación de herramientas de contabilidad de gestión, que dificultan la determinación y el control de costes medioambientales. Tomando como base los resultados obtenidos, se diseñó el modelo de Gestión de Costes Medioambientales Ecoeficiente (GCME). Dicho modelo plantea como deben incorporarse los criterios de ecoeficiencia y las herramientas de contabilidad de gestión medioambiental para la planificación, coordinación y control en la gestión de costes medioambientales. Se plantea que estas etapas deben desarrollarse permanentemente para asegurar la mejora continua del proceso y su adaptación a los cambios tecnológicos y a las regulaciones legales. Se hace énfasis en las directrices que deben seguir las empresas del sector petroquímico venezolano para la aplicación del modelo GCME. Sin embargo, por su generalidad y adaptación a las Normas Internacionales de Contabilidad vigentes en Venezuela, dicho modelo es aplicable a diversos sectores industriales que requieran mejorar su desempeño económico-medioambiental. ABSTRACT Economic growth has led to improvements in the standard of living of the population that often have negative environmental effects over the long term. Faced with this problem, at the enterprise-level, the need to be framed in a sustainable development model that combines the goals of economic growth with environmental protection arises. This situation may represent high costs for the Venezuelan petrochemical companies due to the high risk of their operations and to all the applicable legal regulations on environmental matters. Therefore, this research aims to propose a model for the environmental costs management of these companies based on eco-efficiency. A projective research was performed from a holistic approach. An univariate, contemporary cross-sectional and mixed source research design was used. It is univariate, because it focuses on environmental costs management as the single event to change. It is contemporary cross-sectional, because the event is currently studied and the data measurement is performed in a single moment. It relies on mixed source, because it combines a documentary design with a field design. A documentary design was used for the comparative analysis of the standards of registration and control of environmental costs proposed by international organizations, by applying an analysis matrix of emerging categories. For the diagnosis of the environmental costs management in the Venezuelan petrochemical industry, a field design was applied in the companies that operate in the Zulia region. A questionnaire with 100 items on a Likert scale and 6 multiple-choice questions was used. The questionnaire was validated by peer review and internal consistency reliability was determined using Cronbach's alpha coefficient. The results show that the main issues addressed in the analyzed regulations can be grouped into six themes: scope of environmental management accounting, classification, accounting, allocation, reporting of environmental costs and performance indicators. It was evident that implementation guides of environmental management accounting address all issues identified but there is no uniformity in the assumed criteria. Meanwhile, regulations in the financial accounting field mainly consider aspects related to the accounting treatment of environmental costs and their inclusion in the financial statements. Regarding the environmental costs management performed by Venezuelan petrochemical companies, its limitations were made evident by the low status of eco-efficiency criteria and insufficient application of management accounting tools, which hinder the identification and control of environmental costs. Based on the results, the model of eco-efficient environmental costs management (EECM) was designed. This model indicates how eco-efficiency criteria and tools of environmental management accounting for planning, coordination and control in the environmental costs management should be incorporated. It argues that these stages must be continually developed to ensure a continuous process improvement and its adaptation to technological and legal regulatory changes. The guidelines which the Venezuelan petrochemical companies should follow for the EECM model application have been emphasized. However, due to its generality and adaptation to the International Accounting Standards enforced in Venezuela, this model is applicable to various industries that require an improvement of their economic and environmental performance.

Tecnologia eletroquímica como tratamento alternativo de efluentes derivados da indústria têxtil e petroquímica

In this work, the treatment of wastewater from the textile industry, containing dyes as Yellow Novacron (YN), Red Remazol BR (RRB) and Blue Novacron CD (NB), and also, the treatment of wastewater from petrochemical industry (produced water) were investigated by anodic oxidation (OA) with platinum anodes supported on titanium (Ti/Pt) and boron-doped diamond (DDB). Definitely, one of the main parameters of this kind of treatment is the type of electrocatalytic material used, since the mechanisms and products of some anodic reactions depend on it. The OA of synthetic effluents containing with RRB, NB and YN were investigated in order to find the best conditions for the removal of color and organic content of the dye. According to the experimental results, the process of OA is suitable for decolorization of wastewaters containing these textile dyes due to electrocatalytic properties of DDB and Pt anodes. Removal of the organic load was more efficient at DDB, in all cases; where the dyes were degraded to aliphatic carboxylic acids at the end of the electrolysis. Energy requirements for the removal of color during OA of solutions of RRB, NB and YN depends mainly on the operating conditions, for example, RRB passes of 3.30 kWh m-3 at 20 mA cm-2 for 4.28 kWh m-3 at 60 mA cm-2 (pH = 1); 15.23 kWh m-3 at 20 mA cm-2 to 24.75 kWh m-3 at 60 mA cm-2 (pH 4.5); 10.80 kWh m-3 at 20 mA cm-2 to 31.5 kWh m-3 at 60 mA cm-2 (pH = 8) (estimated data for volume of treated effluent). On the other hand, in the study of OA of produced water effluent generated by petrochemical industry, galvanostatic electrolysis using DDB led to the complete removal of COD (98%), due to large amounts of hydroxyl radicals and peroxodisulphates generated from the oxidation of water and sulfates in solution, respectively. Thus, the rate of COD removal increases with increasing applied current density (15-60 mAcm-2 ). Moreover, at Pt electrode, approximately 50% removal of the organic load was achieved by applying from 15 to 30 mAcm-2 while 80% of COD removal was achieved for 60 mAcm-2 . Thus, the results obtained in the application of this technology were satisfactory depending on the electrocatalytic materials and operating conditions used for removal of organic load (petrochemical and textile effluents) as well as for the removal of color (in the case of textile effluents). Therefore, the applicability of electrochemical treatment can be considered as a new alternative like pretreatment or treatment of effluents derived from textiles and petrochemical industries.

Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados

During the oil refining process a huge discard volume of water occurs, which carries the contaminants from the process. A class of contaminant compounds resulting from the petrochemical industry are the Polyaromatic Hydrocarbons (PAH's). To evaluate the biodegradation of Dibenzothiophene in refinery water a synthetic wastewater was prepared to be treated using activated sludge. For this, a 2 3 Composite Design (plus 3 central points and six axial points) was carried out. The planning had as independent variables (factors) the initial concentration of DBT, pH and time of biodegradation. Biodegradation of DBT was assayed following the parameters COD, pH, temperature, SS, VSS, FVS, SVI. Concerned to the chromatographic conditions, a methodology was validated in order to verify the presence of DBT and its metabolite, 2-HBF, in the final wastewater treated by activated sludge system using a liquid - liquid extraction coupled to HPLC / UV analysis. The parameters used for validation were DL, QL, linearity, recovery and repeatability. As for optimization, the results indicated that the studied methodology can be used in monitoring the DBT degradation and 2- HBF by activated sludge, as they showed excellent linearity values, coefficients of variation, so as satisfactory recovery percentage. COD reduction efficiency tests showed an average percentage of 64.4%. The increasing trend for the results for the TSS and VSS tests showed that the activated sludge was well tailored. The best operating conditions for the reduction of COD were observed when operated with median concentrations of DBT, a higher time to biodegradation, and pH in both the acidic range as the basic one. The biodegradability of the DBT was confirmed by determining the presence of HBF-2. The highest concentrations of HBF-2 were obtained in extreme concentrations of DBT and pH, and higher biodegradation times.

Aplicação de tratamentos eletroquímicos integrados para remediação de solos e águas contaminadas com petróleo e pesticidas

Electrochemical technologies have been proposed as a promising alternative for the treatment of effluents and contaminated soils. Therefore, the objective of this work was to study the treatment of contaminated soils and wastewaters using electrochemical technologies. Thus, the study regarding the scale-up of the electrochemical system with continuous flow treatment of wastewater of the petrochemical industry was investigated using platinum electrodes supported on titanium (Ti / Pt), and boron-doped diamond (BDD). The results clearly showed that under the operating conditions studied and electrocatalytic materials employed, the better removal efficiency was achieved with BDD electrode reducing the chemical oxygen demand (COD) from 2746 mg L-1 to 200 mg L-1 in 5 h consuming 56.2 kWh m-3 . The decontamination of soils and effluents by petrochemical products was evaluated by studying the effects of electrokinetic remediation for removal of total petroleum hydrocarbons (HTP) from contaminated soil with diesel. The efficiency of this process was dependent on the electrolyte used Na2SO4 (96.46%), citric acid (81.36%) and NaOH (68.03%) for 15 days. Furthermore, the effluent after treatment of the soil was treated by electrochemical oxidation, achieving a good elimination of the organic polluting load dissolved. Depending on the physical behavior of wastewater contaminated with oil (emulsified state); atrazine emulsified effluents were investigated. The main characteristics of the effluent produced during the washing of contaminated soil were studied, being dependent on the surfactant dosage used; which determined its electrolytic treatment with BDD. The electrochemical oxidation of emulsified effluent of atrazine was efficient, but the key to the treatment is reducing the size of micelles.