Comparação das águas dos rios Jaguari e Atibaia na região de lançamento de efluente de indústria petroquímica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A case-comparison interview study of brain tumors and employment in occupations with presumed electric and magnetic field exposures

Results from epidemiologic studies suggest that persons working in occupations with presumed electric and magnetic field (EMF) exposures are at increased risk of brain cancer. This study utilized data from a completed, population-based, interview case-control study of central nervous system (CNS) tumors and employment in the petrochemical industry to test the hypothesis that employment in EMF-related occupations increases CNS tumor risk. A total of 375 male residents of the Texas-Louisiana Gulf Coast Area, age 20 to 79, with primary neuroglial CNS tumors diagnosed during the period 1980-84 were identified. A population-based comparison group of 450 age, race and geographically matched males was selected. Occupational histories and potential risk factor data were collected via personal interviews with study subjects or their next-of-kin.^ Adjusted odds ratios were less than 1.0 for persons ever employed in an electrical occupation (OR = 0.65; 95% CI = 0.40-1.09) or whose usual occupation was electrical (OR = 0.76; 95% CI = 0.33-1.73). Relative risk estimates did not increase significantly as time since first employment or duration of employment increased. Examination of CNS tumor risk by high (OR = 0.80), medium (OR = 0.88) and low (OR = 0.45) exposure categories for persons whose usual occupation was electrical did not indicate a dose-response pattern. In addition, the mean age of exposed cases was not significantly younger than that for unexposed cases. Analysis of risk by probability of exposure to EMFs showed non-significant elevations in the adjusted odds ratio for definite exposed workers defined by their usual occupation (OR = 1.78; 95% CI = 0.70-4.51) and ever/never employed status (OR = 1.54; 95% CI = 0.17-4.91).^ These findings suggest that employment in occupations with presumed EMF exposures does not increase CNS tumor risk as was suggested by previous investigations. The results of this study also do not support the EMF-tumor promotion hypothesis. ^

Modelo de gestión de costes medioambientales para el sector petroquímico venezolano

El crecimiento económico ha producido mejoras en el nivel de vida de la población que muchas veces tienen efectos medioambientales negativos en el largo plazo. Ante esta problemática, surge la necesidad a nivel empresarial de enmarcarse en un modelo de desarrollo sostenible que combine los objetivos de crecimiento económico con los de protección medioambiental. Esta situación puede representar altos costes para las empresas del sector petroquímico venezolano, debido al elevado riesgo de sus operaciones y al conjunto de regulaciones legales vigentes en materia medioambiental. Por lo tanto, el objetivo de la presente investigación ha sido proponer un modelo para la gestión de costes medioambientales de dicho sector fundamentado en la ecoeficiencia. Se planteó una investigación proyectiva, desde un enfoque holístico. Se utilizó un diseño de investigación univariable, transeccional contemporáneo, de fuente mixta. Univariable, porque se enfoca en la gestión de costes medioambientales como único evento a modificar. Transeccional contemporáneo, porque el evento se estudia en la actualidad y la medición de los datos se realiza en un solo momento. De fuente mixta, porque se combinó un diseño documental con un diseño de campo. Se utilizó un diseño documental para el análisis comparativo de las normativas de registro y control de costes medioambientales propuestas por organismos internacionales, mediante la aplicación de una matriz de análisis de categorías emergentes. Para el diagnóstico de la gestión de costes medioambientales en el sector petroquímico venezolano, se utilizó un diseño de campo en las empresas del sector que operan en la región zuliana. Para ello se aplicó un cuestionario con 100 ítems en escala Likert y 6 preguntas de opción múltiple. Dicho cuestionario fue validado mediante la revisión de expertos y se determinó su confiablidad a través del coeficiente alfa de Cronbach. Los resultados muestran que los principales asuntos tratados por las normativas analizadas pueden agruparse en seis temas: alcance de la contabilidad de gestión medioambiental, clasificación, tratamiento contable, asignación, informes de costes medioambientales e indicadores de gestión. Se evidenció que las guías de aplicación de la contabilidad de gestión medioambiental abordan todos los temas identificados pero no hay uniformidad en los criterios asumidos. Por el contrario, las normativas en el ámbito de la contabilidad financiera consideran principalmente los aspectos relacionados con el tratamiento contable de los costes medioambientales y su inclusión en los estados financieros. En cuanto a la gestión de costes medioambientales que realizan las empresas del sector petroquímico venezolano, se evidenció su limitación por la escasa consideración de criterios de ecoeficiencia y la poca aplicación de herramientas de contabilidad de gestión, que dificultan la determinación y el control de costes medioambientales. Tomando como base los resultados obtenidos, se diseñó el modelo de Gestión de Costes Medioambientales Ecoeficiente (GCME). Dicho modelo plantea como deben incorporarse los criterios de ecoeficiencia y las herramientas de contabilidad de gestión medioambiental para la planificación, coordinación y control en la gestión de costes medioambientales. Se plantea que estas etapas deben desarrollarse permanentemente para asegurar la mejora continua del proceso y su adaptación a los cambios tecnológicos y a las regulaciones legales. Se hace énfasis en las directrices que deben seguir las empresas del sector petroquímico venezolano para la aplicación del modelo GCME. Sin embargo, por su generalidad y adaptación a las Normas Internacionales de Contabilidad vigentes en Venezuela, dicho modelo es aplicable a diversos sectores industriales que requieran mejorar su desempeño económico-medioambiental. ABSTRACT Economic growth has led to improvements in the standard of living of the population that often have negative environmental effects over the long term. Faced with this problem, at the enterprise-level, the need to be framed in a sustainable development model that combines the goals of economic growth with environmental protection arises. This situation may represent high costs for the Venezuelan petrochemical companies due to the high risk of their operations and to all the applicable legal regulations on environmental matters. Therefore, this research aims to propose a model for the environmental costs management of these companies based on eco-efficiency. A projective research was performed from a holistic approach. An univariate, contemporary cross-sectional and mixed source research design was used. It is univariate, because it focuses on environmental costs management as the single event to change. It is contemporary cross-sectional, because the event is currently studied and the data measurement is performed in a single moment. It relies on mixed source, because it combines a documentary design with a field design. A documentary design was used for the comparative analysis of the standards of registration and control of environmental costs proposed by international organizations, by applying an analysis matrix of emerging categories. For the diagnosis of the environmental costs management in the Venezuelan petrochemical industry, a field design was applied in the companies that operate in the Zulia region. A questionnaire with 100 items on a Likert scale and 6 multiple-choice questions was used. The questionnaire was validated by peer review and internal consistency reliability was determined using Cronbach's alpha coefficient. The results show that the main issues addressed in the analyzed regulations can be grouped into six themes: scope of environmental management accounting, classification, accounting, allocation, reporting of environmental costs and performance indicators. It was evident that implementation guides of environmental management accounting address all issues identified but there is no uniformity in the assumed criteria. Meanwhile, regulations in the financial accounting field mainly consider aspects related to the accounting treatment of environmental costs and their inclusion in the financial statements. Regarding the environmental costs management performed by Venezuelan petrochemical companies, its limitations were made evident by the low status of eco-efficiency criteria and insufficient application of management accounting tools, which hinder the identification and control of environmental costs. Based on the results, the model of eco-efficient environmental costs management (EECM) was designed. This model indicates how eco-efficiency criteria and tools of environmental management accounting for planning, coordination and control in the environmental costs management should be incorporated. It argues that these stages must be continually developed to ensure a continuous process improvement and its adaptation to technological and legal regulatory changes. The guidelines which the Venezuelan petrochemical companies should follow for the EECM model application have been emphasized. However, due to its generality and adaptation to the International Accounting Standards enforced in Venezuela, this model is applicable to various industries that require an improvement of their economic and environmental performance.

Tecnologia eletroquímica como tratamento alternativo de efluentes derivados da indústria têxtil e petroquímica

In this work, the treatment of wastewater from the textile industry, containing dyes as Yellow Novacron (YN), Red Remazol BR (RRB) and Blue Novacron CD (NB), and also, the treatment of wastewater from petrochemical industry (produced water) were investigated by anodic oxidation (OA) with platinum anodes supported on titanium (Ti/Pt) and boron-doped diamond (DDB). Definitely, one of the main parameters of this kind of treatment is the type of electrocatalytic material used, since the mechanisms and products of some anodic reactions depend on it. The OA of synthetic effluents containing with RRB, NB and YN were investigated in order to find the best conditions for the removal of color and organic content of the dye. According to the experimental results, the process of OA is suitable for decolorization of wastewaters containing these textile dyes due to electrocatalytic properties of DDB and Pt anodes. Removal of the organic load was more efficient at DDB, in all cases; where the dyes were degraded to aliphatic carboxylic acids at the end of the electrolysis. Energy requirements for the removal of color during OA of solutions of RRB, NB and YN depends mainly on the operating conditions, for example, RRB passes of 3.30 kWh m-3 at 20 mA cm-2 for 4.28 kWh m-3 at 60 mA cm-2 (pH = 1); 15.23 kWh m-3 at 20 mA cm-2 to 24.75 kWh m-3 at 60 mA cm-2 (pH 4.5); 10.80 kWh m-3 at 20 mA cm-2 to 31.5 kWh m-3 at 60 mA cm-2 (pH = 8) (estimated data for volume of treated effluent). On the other hand, in the study of OA of produced water effluent generated by petrochemical industry, galvanostatic electrolysis using DDB led to the complete removal of COD (98%), due to large amounts of hydroxyl radicals and peroxodisulphates generated from the oxidation of water and sulfates in solution, respectively. Thus, the rate of COD removal increases with increasing applied current density (15-60 mAcm-2 ). Moreover, at Pt electrode, approximately 50% removal of the organic load was achieved by applying from 15 to 30 mAcm-2 while 80% of COD removal was achieved for 60 mAcm-2 . Thus, the results obtained in the application of this technology were satisfactory depending on the electrocatalytic materials and operating conditions used for removal of organic load (petrochemical and textile effluents) as well as for the removal of color (in the case of textile effluents). Therefore, the applicability of electrochemical treatment can be considered as a new alternative like pretreatment or treatment of effluents derived from textiles and petrochemical industries.

Avaliação da biodegradação do dibenzotiofeno utilizando lodos ativados

During the oil refining process a huge discard volume of water occurs, which carries the contaminants from the process. A class of contaminant compounds resulting from the petrochemical industry are the Polyaromatic Hydrocarbons (PAH's). To evaluate the biodegradation of Dibenzothiophene in refinery water a synthetic wastewater was prepared to be treated using activated sludge. For this, a 2 3 Composite Design (plus 3 central points and six axial points) was carried out. The planning had as independent variables (factors) the initial concentration of DBT, pH and time of biodegradation. Biodegradation of DBT was assayed following the parameters COD, pH, temperature, SS, VSS, FVS, SVI. Concerned to the chromatographic conditions, a methodology was validated in order to verify the presence of DBT and its metabolite, 2-HBF, in the final wastewater treated by activated sludge system using a liquid - liquid extraction coupled to HPLC / UV analysis. The parameters used for validation were DL, QL, linearity, recovery and repeatability. As for optimization, the results indicated that the studied methodology can be used in monitoring the DBT degradation and 2- HBF by activated sludge, as they showed excellent linearity values, coefficients of variation, so as satisfactory recovery percentage. COD reduction efficiency tests showed an average percentage of 64.4%. The increasing trend for the results for the TSS and VSS tests showed that the activated sludge was well tailored. The best operating conditions for the reduction of COD were observed when operated with median concentrations of DBT, a higher time to biodegradation, and pH in both the acidic range as the basic one. The biodegradability of the DBT was confirmed by determining the presence of HBF-2. The highest concentrations of HBF-2 were obtained in extreme concentrations of DBT and pH, and higher biodegradation times.

Aplicação de tratamentos eletroquímicos integrados para remediação de solos e águas contaminadas com petróleo e pesticidas

Electrochemical technologies have been proposed as a promising alternative for the treatment of effluents and contaminated soils. Therefore, the objective of this work was to study the treatment of contaminated soils and wastewaters using electrochemical technologies. Thus, the study regarding the scale-up of the electrochemical system with continuous flow treatment of wastewater of the petrochemical industry was investigated using platinum electrodes supported on titanium (Ti / Pt), and boron-doped diamond (BDD). The results clearly showed that under the operating conditions studied and electrocatalytic materials employed, the better removal efficiency was achieved with BDD electrode reducing the chemical oxygen demand (COD) from 2746 mg L-1 to 200 mg L-1 in 5 h consuming 56.2 kWh m-3 . The decontamination of soils and effluents by petrochemical products was evaluated by studying the effects of electrokinetic remediation for removal of total petroleum hydrocarbons (HTP) from contaminated soil with diesel. The efficiency of this process was dependent on the electrolyte used Na2SO4 (96.46%), citric acid (81.36%) and NaOH (68.03%) for 15 days. Furthermore, the effluent after treatment of the soil was treated by electrochemical oxidation, achieving a good elimination of the organic polluting load dissolved. Depending on the physical behavior of wastewater contaminated with oil (emulsified state); atrazine emulsified effluents were investigated. The main characteristics of the effluent produced during the washing of contaminated soil were studied, being dependent on the surfactant dosage used; which determined its electrolytic treatment with BDD. The electrochemical oxidation of emulsified effluent of atrazine was efficient, but the key to the treatment is reducing the size of micelles.

Reconfiguração dinâmica de estratégias distribuídas em dispositivos foundation fieldbus para a otimização de processos na indústria do petróleo

The petrochemical industry has as objective obtain, from crude oil, some products with a higher commercial value and a bigger industrial utility for energy purposes. These industrial processes are complex, commonly operating with large production volume and in restricted operation conditions. The operation control in optimized and stable conditions is important to keep obtained products quality and the industrial plant safety. Currently, industrial network has been attained evidence when there is a need to make the process control in a distributed way. The Foundation Fieldbus protocol for industrial network, for its interoperability feature and its user interface organized in simple configuration blocks, has great notoriety among industrial automation network group. This present work puts together some benefits brought by industrial network technology to petrochemical industrial processes inherent complexity. For this, a dynamic reconfiguration system for intelligent strategies (artificial neural networks, for example) based on the protocol user application layer is proposed which might allow different applications use in a particular process, without operators intervention and with necessary guarantees for the proper plant functioning

Estimação e compensação de não linearidades inerentes aos atuadores dos processos industriais

The oscillations presents in control loops can cause damages in petrochemical industry. Canceling, or even preventing such oscillations, would save up to large amount of dollars. Studies have identified that one of the causes of these oscillations are the nonlinearities present on industrial process actuators. This study has the objective to develop a methodology for removal of the harmful effects of nonlinearities. Will be proposed an parameter estimation method to Hammerstein model, whose nonlinearity is represented by dead-zone or backlash. The estimated parameters will be used to construct inverse models of compensation. A simulated level system was used as a test platform. The valve that controls inflow has a nonlinearity. Results and describing function analysis show an improvement on system response

Pirólise térmica e catalítica de resíduos de vácuo gerados no refino de petróleo

In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste

Reforma a seco de metano com catalisadores Ni/MCM-41 sintetizados a partir de fontes alternativas de sílica

The production of synthesis gas has received renewed attention due to demand for renewable energies to reduce the emissions of gases responsible for enhanced greenhouse effect. This work was carried out in order to synthesize, characterize and evaluate the implementation of nickel catalysts on MCM-41 in dry reforming reactions of methane. The mesoporous molecular sieves were synthesized using as silica sources the tetraethyl orthosilicate (TEOS) and residual glass powder (PV). The sieves were impregnated with 10% nickel to obtain the metallic catalysts (Ni/MCM-41). These materials were calcined and characterized by Thermogravimetric Analysis (TG), Infrared spectroscopy (FTIR), X-ray Diffraction (XRD), Temperature-Programmed Reduction (TPR) and N2 Adsorption/Desorption isotherms (BET/BJH). The catalytic properties of the samples were evaluated in methane dry reforming with CO2 in order to produce synthesis gas to be used in the petrochemical industry. The materials characterized showed hexagonal structure characteristic of mesoporous material MCM-41 type, being maintained after impregnation with nickel. The samples presented variations in the specific surface area, average volume and diameter of pores based on the type of interaction between the nickel and the mesoporous support. The result of the the catalytic tests showed conversions about 91% CO2, 86% CH4, yelds about 85% CO and 81% H2 to Ni/MCM-41_TEOS_C, and conversions about 87% CO2, 82% CH4, yelds about 70% CO and 59% H2 to Ni/MCM-41_PV_C. The similar performance confirms that the TEOS can be replaced by a less noble materials

Reproductive outcomes in an area adjacent to a petrochemical plant in southern Brazil

OBJECTIVE: To evaluate possible adverse reproductive outcomes in an area adjacent to a petrochemical plant in southern Brazil. METHODS: A review of 17,113 birth records of the main hospital of the municipality of Montenegro, southern Brazil, from 1983 to 1998 was carried out. Three groups of cases were selected: (1) newborns with major congenital malformations; (2) newborns with low birth weight (<2,500 g); and (3) stillborns (>500 g). A control was assigned to each case. Controls were the first newborns weighing > or = 2,500 g without malformations and of case-matching sex. Mother's residence during pregnancy was used as an exposure parameter. Statistical analyses were performed using Chi-square test or Fisher test, odds ratio, 0.05 significance level, and 95% confidence interval. RESULTS: For unadjusted analysis, it was found a correlation between low birth weight and geographical proximity of mother's residence to the petrochemical plant (OR = 1.66; 95% CI = 1.01--2.72) or residence on the way of preferential wind direction (OR = 1.62; 95% CI = 1.03--2.56). When other covariates were added in the conditional logistic regression (maternal smoking habits, chronic disease and age), there was no association. CONCLUSIONS: Despite final results were negative, low birth weight could be a good parameter of environmental contamination and should be closely monitored in the studied area.

Industry specific lifecycle services for process critical motors

This Master’s Thesis examines industrial service business and studies how Global Technical Support Center Finland, part of ABB Oy, can develop its lifecycle services based on availability related customer needs. Focus is in three most business critical industry segments OGP (Oil, Gas and Petrochemical), Power and Metals. The research was conducted as a qualitative case study, including literature review and empirical part. The literature review explores industrial service business, product lifecycle services and related customer needs, product effectiveness and maintenance. This study contains also characteristics of constructive research. Primary material was gathered through internal and external interviews. Both theme and semi-structured interviews were performed. This research has shown that customers have different needs depending of the industry segment where they operate. Most remarkable differences are related to maintenance schedules. The main outcomes of the study are the industry specific lifecycle service models that combine company recommendations with customer specific needs. Other development needs were related to proactivity, condition based monitoring, information sharing and lifecycle estimations.

Economical analysis of ethanol steam reformer for hydrogen production associated with a sugarcane industry

An expressive amount of produced hydrogen is generated by customers in-situ such as petrochemical, fertilizer and sugarcane industries. However, the most utilized feedstock is natural gas, a non-renewable and fossil fuel. The introduction of biohydrogen production process associated in a sugarcane industry is an alternative to diminish emissions and contribute to create a CO2 cycle, where the plants capture this gas by photosynthesis process and produces sucrose for ethanol production. The cost of production of ethanol has dramatically decreased (from about US$ 700/m3 in 1970s to US$ 200/m3 today), becoming this a good option at near term, inclusively for its utilization by customers localized in main regions (localized especially in regions such as Southeastern Brazil) Also in near future, it will possible the utilization of fuel cells as form of distributed generation. Its utilization could occur specially in peak hours, diminishing the cost of investments in newer transmission systems. A technical and economic analysis of steam reformer of ethanol to hydrogen production associated with sugarcane industry was recently performed. This technique will also allow the use of ethanol when its price is relatively low. This study was based on a previous R&D study (sponsored by CEMIG - State of Minas Gerais Electricity Company) where thermodynamic and economic analyses were developed, based in the development of two ethanol steam reformers prototypes.x In this study an analysis was performed considering the use of bagasse as source of heat in the steam reforming process. Its use could to diminish the costs of hydrogen production, especially at large scale, obtaining cost-competitive production and permitting that sugarcane industry produces hydrogen in large scale beyond ethylic alcohol, anhydrous alcohol (or ethanol) and sugar.

EMPLOYMENT AND EXPOSURES IN THE PETROLEUM REFINING AND PETROCHEMICAL INDUSTRIES AND THE RISK OF LUNG CANCER (EPIDEMIOLOGY, ASSESSMENT)

This dissertation addresses the risk of lung cancer associated with occupational exposures in the petroleum refining and petrochemical industries. Earlier epidemiologic studies of this association did not adjust for cigarette smoking or have specific exposure classifications. The Texas EXposure Assessment System (TEXAS) was developed with data from a population-based, case-comparison study conducted in five southeast Texas counties between 1976 and 1980. The Texas Exposure Assessment System uses job and process categories developed by the American Petroleum Institute, as well as time-oriented variables to identify high risk groups.^ An industry-wide, increased risk for lung cancer was associated with jobs having low-level hydrocarbon exposure that also include other occupational inhalation exposures (OR = 2.0--adjusted for smoking and latency effects). The prohibition of cigarette smoking for jobs with high-level hydrocarbon exposure might explain part of the increased risk for jobs with low-level hydrocarbon exposures. Asbestos exposure comprises a large part of the risk associated with jobs having other inhalation exposures besides hydrocarbons. Workers in petroleum refineries were not shown to have an increased, occupational risk for lung cancer. The increased risk for lung cancer among petrochemical workers (OR = 3.1--smoking and latency adjusted) is associated with all jobs that involve other inhalation exposure characteristics (not only low-level hydrocarbon exposures). Findings for contract workers and workers exposed to specific chemicals were inconclusive although some hypotheses for future research were identified.^ The study results demonstrate that the predominant risk for lung cancer is due to cigarette smoking (OR = 9.8). Cigarette smoking accounts for 86.5% of the incident lung cancer cases within the study area. Workers in the petroleum industry smoke significantly less than persons employed in other industries (p << 0.001). Only 2.2% of the incident lung cancer cases may be attributed to petroleum industry jobs; lifestyle factors (e.g., nutrition) may be associated with the balance of the cases. The results from this study also suggest possible high risk time periods (OR = 3.9--smoking and occupation adjusted). Artifacts in time-oriented findings may result because of the latency interval for lung cancer, secular peaks in age-, sex-specific incidence rates, or periods of hazardous exposures in the petroleum industry. ^