The French polisher and the unsentimental interior

In January 2011 a swollen Brisbane River broke its banks flooding riverside houses and buildings. The river’s water spread and rose up through storm water drains inundating some 20 000 houses in low-lying land. As the water receded those residents affected by the floods returned to their homes to assess the damage. While some people breathed a sigh of relief others were devastated by the overwhelming damage to their homes and personal belongings. Over the next few weeks the landscape of Brisbane was altered not merely by the mud and debris left by the torrent of water, but by the piles of domestic contents occupying Brisbane streets. Beds, toys, cabinets, plasterboard, tiles and household furniture lined curbsides waiting for collection. Later they would accumulate in public parks and sports centres to await disposal, momentarily creating an unsettling landscape of discarded domestic interiors. While most houses remained standing the heart breaking repercussions were evident in their interiority. Thousands of volunteers flocked to help those affected by the floods to purge the damage left by the water – removing wall and floor linings, discarding furniture and spoilt belongings. In her paper on Hurricane Katrina, Julieanna Preston wrote, ‘What anthropological evidence would we find as we followed their migration – heaps left by the side of the road, the physical weight overcoming the personal value…’ For many of the post flood restored homes and buildings entire interiors have been replaced, eradicating any trace of the significant event that disturbed them only months earlier. There were artifacts that would have survived the floods - furniture of solid timber – these were discarded and with them the patina that marked an important event in history. The patina is beyond technological reproducibility, and as Walter Benjamin writes, this being the whole premise of genuineness. It is the role of the French Polisher to maintain the true wear of the artefact for it is the patina that is most valuable in its ability to narrate the history of a piece. In 2012 two separate exhibitions in Brisbane will take place to display a selected collection of flood-damaged artefacts. This orchestrated way to commemorate the damage left by floods may be a method to compensate for the haste in which the damage was purged from the city. This need for exhibiting damaged artifacts illustrates Andreas Huyssen’s point that "…today memory is understood as a mode of re-presentation and as belonging to the present." This research looks at the dying trade of the French Polisher through conversations and a visual study of flood damaged furniture. The research also investigates the personal loss of artifacts through intimate stories shared by flood victims. This paper seeks to understand why so much was discarded and celebrate what remains.

Archaeometric evidence for the authenticity of the Jehoash inscription tablet

A gray, fine-grained arkosic sandstone tablet bearing an inscription in ancient Hebrew from the First Temple Period contains a rich assemblage of particles accumulated in the covering patina. Two types of patina cover the tablet: a thin layer of black to orange iron-oxide-rich layer, a product of micro-biogenic processes, and a light beige patina that contains feldspars, carbonate, iron oxide, subangular quartz grains, carbon ash particles and gold globules (1 to 4 microns [1 micron = 0.001 millimeter] in diameter). The patina covers the rock surface as well as the engraved lettering grooves and blankets and thus post-dates the incised inscription as well as a crack that runs across the stone and several of the engraved letters. Radiocarbon analyses of the carbon particles in the patina yield a calibrated radiocarbon age of 2340 to 2150 Cal BP. The presence of microcolonial fungi and associated pitting in the patina indicates slow growth over many years. The occurrence of pure gold globules and carbon ash particles is evidence of a thermal event in close proximity to the tablet (above 1000 degrees Celsius). This study supports the antiquity of the patina, which in turn, strengthens the contention that the inscription is authentic.

Element partitioning and potential mobility within surface dusts on buildings in a polluted urban environment, Budapest.

A voluminous literature exists on the analysis of water-soluble ions extracted from gypsum crusts and patinas formed on building surfaces. However, less data is available on the intermediate dust layer and the important role its complex matrix and constituents play in crust/patina formation. To address this issue, surface dust samples were collected from two buildings in the city of Budapest. Substrate properties, different pollution levels and environmental variations were considered by collecting samples from a city centre granite building exposed to intense traffic conditions and from an oolitic limestone church situated in a pedestrian area outside and high above the main pollution zone. Selective extraction examines both water-soluble ions (Ca2+, Mg2+, Na+, K+, Cl-, NO3- SO42-) and selected elements (Fe, Mn, Zn, Cu, Cr, Pb, Ni) from the water-soluble, exchangeable/carbonate, amorphous Mn, amorphous Fe/Mn, crystalline Fe/Mn, organic and residual phases, their mobility and potential to catalyse heterogeneous surface reactions. Salt weathering processes are highlighted by high concentrations of water-soluble Ca2+, Na+, Cl- and SO42-- at both sites. Manganese, Zn and Cu and to a lesser extent Pb and Ni, are very mobile in the city centre dust, where 30%, 54%, 38%, 11% and 11% of their totals are bound by the water-soluble phase, respectively. Church dust shows a sharp contrast for Mn, Zn, Cu and Pb with only 3%, 1%, 12% and 3% of their totals being bound by the water-soluble phase respectively. This may be due to (a) different environmental conditions at the church e.g. lower humidity (b) continuous replenishment of salts under intensive city centre traffic conditions (c) enrichment in oxidisable organic carbon by a factor of 4.5 and a tenfold increase in acidity in the city centre dust.

Nature des perceptions entourant les qualités écologiques des objets à caractère artisanal

Depuis quelques temps, on note que les objets d’apparence artisanale symbolisent souvent des qualités écologiques telles que des matériaux naturels et une fabrication éthique. Les visées de l’étude ont été d’explorer les perceptions à l’égard des objets à caractère artisanal et cela, en vue de reconnaître quelles qualités écologiques sont attribuées à ces derniers, tout en tentant de comprendre les raisons qui se cachent derrière ces associations. Une étude auprès d’usagers a permis d’explorer l’ensemble des qualités pouvant être liées à ce type d’objet, en considérant plus précisément le rapport entre les qualités écologiques leur étant accordées et leur durée de vie projetée. Pour ce faire, au cours d’entretiens individuels, des thèmes comme l’appréciation à long terme, la signification et la considération de la diversité culturelle ont été examinés. Les résultats montrent entre autres que les objets à caractère artisanal sont caractérisés comme étant composés de matériaux naturels et sains pour la santé des usagers. Leur usure est reconnue comme éveillant les représentations quant à leur « histoire », alors que leur originalité leur confère une « âme ». Enfin, car ils sont considérés comme ayant été fabriqués par des créateurs autonomes, ces objets sont associés à des conditions de travail éthiques et sont perçus comme étant capables de faire tourner l’économie locale. Les renseignements recueillis peuvent informer les théories et la pratique en design industriel quant à la disposition des objets à caractère artisanal à être appréciés par les usagers, de leur durée de vie projetée et du désir de les entretenir et de les léguer. Ce projet constitue un premier répertoire des perceptions entourant ce type d’objet, un champ de recherche encore très peu documenté, malgré qu’il s’inscrive à l’intérieur d’un contexte environnemental et social bien actuel. Les résultats obtenus contribuent à leur façon à la perspective d’une conception, d’une fabrication et d’une consommation davantage viables.

Iniqüidade em saúde: uma extensão das desigualdades sociais no sistema público de saúde do Brasil (2003-2006)

This issue analises the unevenness in the brazilian system of public health care as an extension of socials inequities. It is a theoretical study based in a historical method, using empirical camp from academic, corporation and institution researchs, along the period 2002-2006. Equality and effectiveness in health systems are analitical basic cathegories grap in the root of the doctrine, principles and organization of the Unique Health System, in which sectorial actions are inserted. Discuss the estructural prodution and determined those inequalities through some social determiners of health system: income, land, food securitiy, nutritional situation, basic sanitation, epidemiological inequities and public management policy. Carry out a thematic review over health social production, it formlation and the goals of social policies, as well as the insertion of the equality principle in the assistance system, in the frame of the running public health regulations. It uses reflections that enlighted the correlation between the process of political-institutional actions and equity on health assistance. Analized the pertinency of sectorial reorganizational strategies on basic attendance, confronting the hipothesis that those strategies reinforce social inequities in health system, because it organize diferential assistance levels over not equal baselines. The results show up that social inequalities, even remaining, have had a small decrease; that the selectiviness of actual public policies and the duplication of the health system, increases the differences within and between the social classes and configures the assistance as inequal. The basic care system has great shortages that also appeares in middle and complex assistance levels. As conclusion, it remarks that the health assintance system, even with it integrality has limits; structural problems on material conditions of living and health system could not be reversed only with institutional legal arragements; by the contrary, in border conditions, these strategies produce policies that reinforce inequities, neglecting the equity principle of the system in which frame, they work. One patina of this tim

Biofilms on exposed monumental stones: mechanism of formation and development of new control methods

Within the stone monumental artefacts artistic fountains are extremely favorable to formation of biofilms, giving rise to biodegradation processes related with physical-chemical and visual aspect alterations, because of their particular exposure conditions. Microbial diversity of five fountains (two from Spain and three from Italy) was investigated. It was observed an ample similarity between the biodiversity of monumental stones reported in literature and that one found in studied fountains. Mechanical procedures and toxic chemical products are usually employed to remove such phototrophic patinas. Alternative methods based on natural antifouling substances are recently experimented in the marine sector, due to their very low environmental impact and for the bio settlement prevention on partially immersed structures of ships. In the present work groups of antibiofouling agents (ABAs) were selected from literature for their ability to interfere, at molecular level, with the microbial communication system “quorum sensing”, inhibiting the initial phase of biofilm formation. The efficacy of some natural antibiofoulants agents (ABAs) with terrestrial (Capsaicine - CS, Cinnamaldehyde - CI) and marine origin (Zosteric Acid - ZA, poly-Alkyl Pyridinium Salts – pAPS and Ceramium botryocarpum extract - CBE), incorporated into two commercial coatings (Silres BS OH 100 - S and Wacker Silres BS 290 - W) commonly used in stone conservation procedures were evaluated. The formation of phototrophic biofilms in laboratory conditions (on Carrara marble specimens and Sierra Elvira stone) and on two monumental fountains (Tacca’s Fountain 2 - Florence, Italy and Fountain from Patio de la Lindaraja - Alhambra Palace, Granada, Spain) has been investigated in the presence or absence of these natural antifouling agents. The natural antibiofouling agents, at tested concentrations, demonstrated a certain inhibitory effect. The silane-siloxane based silicone coating (W) mixing with ABAs was more suitable with respect to ethyl silicate coating (S) and proved efficacy against biofilm formation only when incompletely cured. The laboratory results indicated a positive action in inhibiting the patina formation, especially for poly-alkyl pyridinium salts, zosteric acid and cinnamaldehyde, while on site tests revealed a good effect for zosteric acid.

Acciaio COR-TEN esposto in ambiente urbano-costiero: studio del rilascio di metalli di lega

Il Cor-Ten è un acciaio micro-legato, detto anche acciaio patinabile, che garantisce una buona resistenza alla corrosione da agenti atmosferici. Proprio grazie a questa sua peculiare caratteristica sta conoscendo un vasto impiego in particolare nel campo dell’edilizia e delle infrastrutture. La corrosione infatti interessa tutti i settori produttivi e non, provocando ingenti danni economici. Stime effettuate negli ultimi 40anni da diversi enti internazionali indicano che l’entità di questi danni, pur variando da settore a settore, risulta compresa per i paesi industrializzati tra il 3 e il 4% del PIL. Da questi dati si evince la necessità di proteggere i materiali dalla corrosione; in genere per questo scopo si ricorre a trattamenti superficiali o a rivestimenti protettivi. Queste tecniche non rappresentano però l’unica strada, è possibile infatti agire sulla composizione della lega, come nel caso del Cor-Ten, in modo che l’interazione metallo-ambiente porti alla formazione di una patina protettiva di prodotti di corrosione relativamente stabili. La formazione di questo strato, cosiddetto passivante, protegge il metallo da un’ulteriore attacco corrosivo. Scopo di questo lavoro di tesi è studiare il comportamento di questo materiale in ambiente urbano-costiero in tre differenti stati di finitura in cui è commercialmente disponibile: grezzo, pre-patinato e pre-patinato cerato, focalizzando l’attenzione sugli aspetti ambientali legati al suo utilizzo e cercando di valutare in particolare il rilascio dei metalli di lega nell’ambiente, aspetto fino ad ora non considerato in letteratura. I risultati ottenuti indicano che sembrerebbe preferibile l’utilizzo del materiale grezzo rispetto ai pre-patinati, almeno per quanto riguarda il rilascio di metalli in ambiente. Sulla base dei risultati ottenuti è possibile fornire una stima, per i tre stati di finitura di Cor-Ten A considerati, del quantitativo totale (solubile + estraibile) dei metalli rilasciati in ambiente nei sette mesi di esposizione durante la stagione primaverile-estiva della sperimentazione condotta in questo studio. La quantità rilasciata stimata per il Fe oscilla tra i 0,5 g/m2 per i provini light e i 0,7 g/m2 per i provini dark e grezzi, per il Ni il range è compreso tra i 3,6 mg/m2 dei provini grezzi e i 5 mg/m2 per i light, nel caso del Mn il quantitativo varia dai 6,8 mg/m2 per i light ai 10 mg/m2 per i grezzi. Per il Cr la stima per i provini pre-patinati è simile e si attesta intorno a 1,7 mg/m2, risultando minore (anche se in maniera non rilevate) per i grezzi.

Outdoor bronze conservation: assessment of protective treatments by accelerated aging and of treatment removal procedures by laser cleaning

Outdoor bronzes exposed to the environment form naturally a layer called patina, which may be able to protect the metallic substrate. However, since the last century, with the appearance of acid rains, a strong change in the nature and properties of the copper based patinas occurred [1]. Studies and general observations have established that bronze corrosion patinas created by acid rain are not only disfiguring in terms of loss of detail and homogeneity, but are also unstable [2]. The unstable patina is partially leached away by rainwater. This leaching is represented by green streaking on bronze monuments [3]. Because of the instability of the patina, conservation techniques are usually required. On a bronze object exposed to the outdoor environment, there are different actions of the rainfall and other atmospheric agents as a function of the monument shape. In fact, we recognize sheltered and unsheltered areas as regards exposure to rainwater [4]. As a consequence of these different actions, two main patina types are formed on monuments exposed to the outdoor environment. These patinas have different electrochemical, morphological and compositional characteristics [1]. In the case of sheltered areas, the patina contains mainly copper products, stratified above a layer strongly enriched in insoluble Sn oxides, located at the interface with the uncorroded metal. Moreover, different colors of the patina result from the exposure geometry. The surface color may be pale green for unsheltered areas, and green and mat black for sheltered areas [4]. Thus, in real outdoor bronze monuments, the corrosion behavior is strongly influenced by the exposure geometry. This must be taken into account when designing conservation procedures, since the patina is in most cases the support on which corrosion inhibitors are applied. Presently, for protecting outdoor bronzes against atmospheric corrosion, inhibitors and protective treatments are used. BTA and its derivatives, which are the most common inhibitors used for copper and its alloy, were found to be toxic for the environment and human health [5, 6]. Moreover, it has been demonstrated that BTA is efficient when applied on bare copper but not as efficient when applied on bare bronze [7]. Thus it was necessary to find alternative compounds. Silane-based inhibitors (already successfully tested on copper and other metallic substrates [8]), were taken into consideration as a non-toxic, environmentally friendly alternative to BTA derivatives for bronze protection. The purpose of this thesis was based on the assessment of the efficiency of a selected compound, to protect the bronze against corrosion, which is the 3-mercapto-propyl-trimethoxy-silane (PropS-SH). It was selected thanks to the collaboration with the Corrosion Studies Centre “Aldo Daccò” at the Università di Ferrara. Since previous studies [9, 10, 11] demonstrated that the addition of nanoparticles to silane-based inhibitors leads to an increase of the protective efficiency, we also wanted to evaluate the influence of the addition of CeO2, La2O3, TiO2 nanoparticles on the protective efficiency of 3-mercapto-propyl-trimethoxy-silane, applied on pre-patinated bronze surfaces. This study is the first section of the thesis. Since restorers have to work on patinated bronzes and not on bare metal (except for contemporary art), it is important to be able to recreate the patina, under laboratory conditions, either in sheltered or unsheltered conditions to test the coating and to obtain reliable results. Therefore, at the University of Bologna, different devices have been designed to simulate the real outdoor conditions and to create a patina which is representative of real application conditions of inhibitor or protective treatments. In particular, accelerated ageing devices by wet & dry (simulating the action of stagnant rain in sheltered areas [12]) and by dropping (simulating the leaching action of the rain in unsheltered areas [1]) tests were used. In the present work, we used the dropping test as a method to produce pre-patinated bronze surfaces for the application of a candidate inhibitor as well as for evaluating its protective efficiency on aged bronze (unsheltered areas). In this thesis, gilded bronzes were also studied. When they are exposed to the outside environment, a corrosion phenomenon appears which is due to the electrochemical couple gold/copper where copper is the anode. In the presence of an electrolyte, this phenomenon results in the formation of corrosion products than will cause a blistering of the gold (or a break-up and loss of the film in some cases). Moreover, because of the diffusion of the copper salts to the surface, aggregates and a greenish film will be formed on the surface of the sample [13]. By coating gilded samples with PropS-SH and PropS-SH containing nano-particles and carrying out accelerated ageing by the dropping test, a discussion is possible on the effectiveness of this coating, either with nano-particles or not, against the corrosion process. This part is the section 2 of this thesis. Finally, a discussion about laser treatment aiming at the assessment of reversibility/re-applicability of the PropS-SH coating can be found in section 3 of this thesis. Because the protective layer loses its efficiency with time, it is necessary to find a way of removing the silane layer, before applying a new one on the “bare” patina. One request is to minimize the damages that a laser treatment would create on the patina. Therefore, different laser fluences (energy/surface) were applied on the sample surface during the treatment process in order to find the best range of fluence. In particular, we made a characterization of surfaces before and after removal of PropS-SH (applied on a naturally patinated surface, and subsequently aged by natural exposure) with laser methods. The laser removal treatment was done by the CNR Institute of Applied Physics “Nello Carrara” of Sesto Fiorentino in Florence. In all the three sections of the thesis, a range of non-destructive spectroscopic methods (Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS), μ-Raman spectroscopy, X-Ray diffractometry (XRD)) were used for characterizing the corroded surfaces. AAS (Atomic Absorption Spectroscopy) was used to analyze the ageing solutions from the dropping test in sections 1 and 2.

Corrosione atmosferica in area urbana-costiera di un acciaio Cor-Ten: studio del rilascio in ambiente dei metalli di lega

Cor-Ten is a particular kind of steel, belonging to low-alloyed steel; thanks to his aesthetic features and resistance to atmospheric corrosion, this material is largely used in architectural, artistic and infrastructural applications. After environmental exposure, Cor-Ten steel exhibits the characteristic ability to self-protect from corrosion, by the development of a stable and adherent protective layer. However, some environmental factors can influence the formation and stability of the patina. In particular, exposure of Cor-Ten to polluted atmosphere (NOx, SOx, O3) or coastal areas (marine spray) may cause problems to the protective layer and, as a consequence, a release of alloying metals, which can accumulate near the structures. Some of these metals, such as Cr and Ni, could be very dangerous for soils and water because of their large toxicity. The aim of this work was to study the corrosion behavior of Cor-Ten exposed to an urban-coastal site (Rimini, Italy). Three different kinds of commercial surface finish (bare and pre-patinated, with or without a beeswax covering) were examined, both in sheltered and unsheltered exposure conditions. Wet deposition brushing the specimens surface (leaching solutions) are monthly collected and analyzed to evaluate the extent of metal release and the form in which they leave the surface, for example, as water-soluble compounds or non-adherent corrosion products. Five alloying metals (Fe, Cu, Cr, Mn and Ni) and nine ions (Cl-, NO3-, NO2-, SO42-, Na+, Ca2+, K+, Mg2+, NH4+) are determined through Atomic Absorption Spectroscopy and Ion Chromatography, respectively. Furthermore, the evolution and the behaviour of the patina are periodically followed by surface investigations (SEM-EDS and Raman Spectroscopy). After two years of exposure, the results show that Bare Cor-Ten, cheaper than the other analyzed specimens, even though undergoes the greater mass variation, his metal release is comparable to the release of the pre-patinated samples. The behavior of pre-patinated steel, with or without beeswax covering, do not show particular difference. This exposure environment doesn’t allow a completely stabilization of the patina; nevertheless an estimate of metal release after 10 years of exposure points out that the environmental impact of Cor-Ten is very low: for example, the release of chromium in the soluble fraction is less than 10 mg if we consider an exposed wall of 10 m2.

Strategie di conservazione per bronzi esposti all'aperto: studio di metodologie di pulitura, patinazione e consolidamento

Con l’aumento dell’acidità e degli inquinanti nelle deposizioni umide, la corrosione atmosferica dei bronzi esposti all’aperto è stata accelerata e la stabilità della patina di prodotti di alterazione, che solitamente protegge parzialmente il substrato metallico, risulta compromessa. La patina costituisce il supporto reale nelle condizioni d’impiego dell’inibitore o del protettivo, il quale viene applicato in seguito ad una pulitura del manufatto corroso che non espone il metallo nudo. L’inibitore attualmente più utilizzato, benzotriazolo (BTA), risulta non totalmente adeguato nei confronti del bronzo, tossico per l’ambiente e sospetto cancerogeno per l’uomo. Occorre quindi sviluppare soluzioni alternative per la conservazione dei bronzi all’aperto: a questo scopo, il presente lavoro di tesi si è sviluppato in tre fasi: (i) patinazione via invecchiamento artificiale accelerato, simulando la pioggia battente (dropping test) e la pioggia stagnante (wet&dry) su campioni di bronzo quaternario Cu-Sn-Zn-Pb, al fine di produrre un substrato rappresentativo, diversificando le patine prodotte dalle due geometrie di esposizione, sul quale possa essere applicato un inibitore o protettivo. La patinazione artificiale ha permesso di riprodurre efficacemente le due tipologie di patine naturali: le superfici patinate in pioggia battente hanno mostrato il tipico arricchimento in Stagno dovuto alla decuprificazione, mentre le superfici patinate in pioggia stagnante hanno presentato la comparsa dei tipici prodotti precursori dei solfati basici. (ii) pulitura di una patina naturale su bronzo quaternario (fontana del XVII sec.) mediante sabbiatura criogenica (dry-ice blasting), al fine di verificare l’efficienza di questa tecnica per preparare le superfici patinate all’applicazione di un inibitore o protettivo e il suo eventuale utilizzo in sostituzione alle tecniche tradizionali. La sabbiatura criogenica si è tuttavia dimostrata non selettiva nei confronti dei depositi calcarei, dimostrandosi non utilmente applicabile. (iii) protezione di superfici di bronzo quaternario, patinate artificialmente simulando la pioggia battente, mediante un trattamento innovativo di biopatinazione ottenuto applicando il ceppo fungino Beauveria Bassiana, potenzialmente in grado di convertire in ossalati i prodotti di corrosione della patina naturale. Lo scopo è quello di valutare l’efficienza protettiva della biopatina in seguito ad un invecchiamento accelerato simulante la pioggia battente. La biopatinazione è risultata applicabile anche a superfici arricchite in Stagno artificialmente (dropping test), ma la biopatina ottenuta non si è mostrata in grado di limitare i fenomeni corrosivi. Si ritengono necessarie ulteriori prove per valutarne l’efficienza a più lungo termine.