The Kasparov-World Game

Kasparov-World, initiated by Microsoft and also sponsored by First USA, was a novel correspondence game played on the World Wide Web at one ply per day. This was the first time that any group had attempted to form on the Web and then solve shared problems against fixed, short-term deadlines. The first author first became involved in his role as a Web consultant, observing the dynamics and effectiveness of the group. These are fully described, together with observations on the technological contribution and the second author's post-hoc computation of some relevant Endgame Tables.

Chess Endgame News

The DTZ metric indicates the minimaxed 'Depth To Zeroing of the ply-count' for decisive positions. Ronald de Man's DTZ50' metric is a variant of the DTZ metric as moderated by the FIDE 50-move draw-claim rule. DTZ50'-depths are given to '50-move-rule draws' as well as to unconditionally decisive positions. This note defines a two-dimensional taxonomy of positions implicitly defined by DTZ50'. 'Decisive' positions may have values of (wins/losses) v =1/-1 or v = 2/-2. A position's depth in the new DTZ50' metric may be greater than, equal to or less than its DTZ depth. The six parts of the taxonomy are examined in detail, and illustrated by some 40 positions and 16 lines. Positions, lines and the annotation of these lines are supplied in the ancillary data files.

Depth to mate and the 50-move rule

The most popular endgame tables (EGTs) documenting ‘DTM’ Depth to Mate in chess endgames are those of Eugene Nalimov but these do not recognise the FIDE 50-move rule ‘50mr’. This paper marks the creation by the first author of EGTs for sub-6-man (s6m) chess and beyond which give DTM as affected by the ply count pc. The results are put into the context of previous work recognising the 50mr and are compared with the original unmoderated DTM results. The work is also notable for being the first EGT generation work to use the functional programming language HASKELL.

Influence of hardwood, softwoodand fractionated pulp in a stratifiedthree-layered fine paper : Lövved, barrved och fraktionerad massa ochdess inverkan på ett treskiktat finpapper

Four different trials of stratified three-layered fine paper, of sulphate pulp, were performed to investigate if stratified fine fraction or fibres from birch can improve the properties of a paper compared to a reference sheet. All trials had five different scenarios and each scenario was calendered with different linear load. All sheets had a grammage of 80 g/m2.In the first trial, the paper contained birch, pine and filler of calciumcarbonate (marble), and was manufactured with the pilot paper machine XPM and the stratified headbox Formator at RCF (Stora Enso Research Center in Falun). The furnish consisted of 75% birch and 25% pine.The second trial contained coated sheets with paper from trial one as the base paper. The coating slip contained calciumcarbonate and clay and the amount was approximately 10-12 g/m2.The third trial, also with birch and pine but without filler, was performed at STFI (Skogsindustrins Tekniska Forskningsinstitut in Stockholm) with the laboratory scaled paper machine StratEx and the stratified headbox AQ-vanes. The furnish consisted of 75% birch and 25% pine, except for one scenario which contained of 75% pine and 25% birch.The last trial contained fractionated pulp of birch and pine and was performed at STFI. 50% was fine fraction and 50% was coarse fraction.This test does not show any clear benefits of making stratified sheets of birch and pine when it comes to properties such as bending stiffness, tensile index and surface smoothness. The retention can be improved with birch in the surface plies. It is possible that the formation can be improved with birch in the surface plies and pine in the middle ply. It is also possible that fine fraction in the surface plies and coarse fraction in the middle ply can improve both surface smoothness and bending stiffness. The results in this test are shown with confidence intervals which points out the difficulties of analysing sheets manufactured with a pilot paper machine or a laboratory scaled paper machine.

Desempenho de um trator agrícola equipado com pneus radiais e diagonais com três níveis de lastros líquidos

A utilização correta de pneus em tratores, tanto em relação ao seu tipo quanto à calibração de sua pressão interna, e a lastragem ideal para cada condição de carga são fatores que influem significativamente no desempenho do trator. Esta pesquisa teve como objetivo comparar o desempenho de um trator equipado com pneus radiais e com pneus diagonais, para três condições de lastragem líquida (0%, 40% e 75% de água), em três condições superficiais de um Nitossolo Vermelho distrófico (superfície firme, preparada e com cobertura vegetal de resto de milho) e em três velocidades teóricas de deslocamento (4 km h-1, 5 km h-1 e 7 km h-1), informadas no painel do trator, correspondendo às marchas B1, B2 e C1. O melhor desempenho do trator, equipado com pneu diagonal, ocorreu na condição de 75% de água nos pneus, apresentando maior velocidade de deslocamento, menor patinhagem do trator, menor consumo horário de combustível e gerando maior potência na barra de tração. Com pneus radiais, o melhor desempenho do trator ocorreu na condição de 40% de água nos pneus, proporcionando maiores velocidades de deslocamento do trator, menores patinhagens, menores consumos, horário e específico de combustível, e maiores potência e rendimento na barra de tração.

Avaliação do contato pneu-solo em três modelos de pneus agrícolas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The effect of thermal cycles on the mechanical properties of fiber-metal laminates

The effect of thermal-shock cycles on the mechanical properties of fiber-metal laminates (FMLs) has been evaluated. FML plates were composed by two AA2024 Al sheets (1.6 mm thick) and one composite ply formed by two layers of unidirectional glass fiber epoxy prepreg and two layers of epoxy adhesive tape of glass fiber reinforced epoxy adhesive. The set was manufactured by hand layup and typical vacuum bag technique. The curing cycle was in autoclave at 125 +/- 5 degrees C for 90 min and an autoclave pressure of 400 kPa. FML coupons taken from the manufactured plate were submitted to temperature variations between -50 and +80 degrees C, with a fast transition between these temperatures. Tensile and interlaminar shear strength were evaluated on samples after 1000 and 2000 cycles, and compared to nonexposed samples. 2000 Cycles corresponds to typical C Check interval for commercial aircraft maintenance programs. It was observed that the thermal-shock cycles did not result in significant microstructural changes on the FML, particularly on the composite ply. Similarly, no appreciable effect on the mechanical properties of FML was observed by the thermal-shock cycles. (c) 2012 Elsevier Ltd. All rights reserved.

New Insight into the Mechanism of Action of Wasp Mastoparan Peptides: Lytic Activity and Clustering Observed with Giant Vesicles

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desempenho de um trator em função do tipo de pneu, da lastragem e da velocidade de trabalho

O trabalho comparou o desempenho de um trator agrícola 4x2 TDA de 89 kW (121cv) em função do tipo de pneus (radial, diagonal e de baixa pressão), a condição de lastragem (com e sem água nos pneus) e quatro velocidades [V1 (1,84km h-1), V2 (3,18km h-1, V3 (4,57km h-1), V4 (5,04km h-1)]. O experimento foi realizado na UNESP-Jaboticabal-SP, em condição de preparo do solo com escarificador de sete hastes a 30cm de profundidade. Os pneus foram do tipo R1, com as seguintes características: [radial (dianteiros-14.9 R 26; traseiros-620/75 R 30) diagonal (dianteiros-14.9-26, traseiros-23.1-30) e BPAF (dianteiros-500/60-26.5; traseiros-700/55-34)]. O delineamento experimental foi blocos casualizados, em esquema fatorial 3x2x4, com 24 tratamentos e três repetições. Os resultados evidenciaram vantagens para o trator equipado com pneus radiais.

Variaciones del índice de cono en suelo movilizado posterior al tráfico de un tractor equipado con dos tipos de neumáticos y a cuatro velocidades de desplazamiento

The tractor is one of the machines that more traffics over the soil during the processes involving agricultural production. The interaction tractor/soil is made by the tires which, in most of the cases, are pneumatic. The tire type and the tractor travel speed, interfere directly on the pressure over the soil. One of the techniques employed to evaluate the alterations that tractor traffic causes in the soil is to measure its Cone Index. The aim of this research was to evaluate the same Cone Index alterations caused by an agricultural tractor equipped with both radial tires and bias ply tires, trafficking mobilized soil in four different travel speeds. The experiment was performed in a LATOSSOLO VERMELHO, located 22°51' S, 48°25'W and 770 m of altitude, in Botucatu-SP, Brazil. The soil mobilization was performed with a chisel plow and a disc arrow. The traction was accomplished with a John Deere tractor, model 6600, with 88 kW of power and 6,723 kg. Equipment requiring a force of 25kN was traced by the tractor draw bar. The experimental design was in randomized blocks with 4 × 2 factorial arrangements, with two distinct treatments corresponding to the types of tires (bias and radial) and the four travel speeds, with six replications. There were selected the following speeds: 3.5, 3.9, 5.1 and 5.9 km h-1. To determine the soil resistance, there was utilized MSSU - Mobile Soil Sampling Unit, with which the Cone Index was obtained in layers from 0-100, 100-200, 200-300, 300-400, 400-500 and over 500 mm deep. The Cone Index where evaluated in areas with non contact between tire and soil (ICn) and in the tire footprint track (ICp). There were calculated the Cone Index increments caused by the tractor tire (AIC) and the results showed that as the tractor travel speed increased, there were observed decrements in the medium values of cone index. The radial tire provided smaller values of the Cone Index in the superficial layer of the soil (0 to 100 mm) in relation to the bias ply tire, when the speed was approximately 6 km h-1. The increment in the Cone Index, promoted by the tractor, was more intense in the first 200 mm depth, but it also reached the layer from 200 to 300 mm.

Desempenho operacional e energético de um trator agrícola em função do tipo de pneu, velocidade de deslocamento, lastragem líquida e condição superficial do solo: Leonardo de Almeida Monteiro. -

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação das metodologias de derterminação das áreas de contato e deformações elásticas de pneus agrícolas em função das pressões de inflação e cargas radiais

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Desempenho de um trator agrícola em função do desgaste das garras dos pneus e das condições superficiais do solo

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Desenvolvimento de critérios para seleção de adesivos utilizados na fabricação de pás de turbinas eólicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Emprego da reflectometria por domínio do tempo na determinação da umidade de madeiras comerciais

Pós-graduação em Agronomia (Energia na Agricultura) - FCA