Influence of process parameters on fluidised hot-melt granulation and tablet pressing of pharmaceutical powders

This study investigates the influence of process parameters on the fluidised hot melt granulation of lactose and PEG 6000, and the subsequent tablet pressing of the granules. Granulation experiments were performed to assess the effect of granulation time and binder content of the feed on the resulting granule properties such as mass mean granule size, size distribution, granule fracture stress, and granule porosity. These data were correlated using the granule growth regime model. It was found that the dominant granule growth mechanisms in this melt granulation system were nucleation followed by steady growth (PEG 10–20% w/w). However, with binder contents greater than 20% w/w, the granulation mechanism moved to the “over-wet massing” regime in which discrete granule formation could not be obtained. The granules produced in the melt fluidised bed process were subsequently pressed into tablets using an industrial tablet press. The physical properties of the tablets: fracture stress, disintegration time and friability were assessed using industry standards. These analyses indicated that particle size and binder content of the initial granules influenced the mechanical properties of the tablets. It was noted that a decrease in initial granule size resulted in an increase in the fracture stress of the tablets formed.

Tono-Pen determination of intraocular pressure in patients with band keratopathy or glued cornea

Aims. To evaluate the intraocular pressure (IOP) measurements in patients with band keratopathy or glued corneas obtained from affected and non-affected areas. Methods. 15 patients with band keratopathy or glued corneas were prospectively recruited. When both eyes were affected, only the right eye was analysed. Tono-Pen readings of IOP were obtained sequentially from the affected and non-affected corneal surface. Additionally, Goldmann applanation tonometry was attempted. Results. Determination of IOP with the Tono-Pen was possible in all cases, while Goldmann tonometry was not performed in three patients because of severe corneal irregularities. The average of the Tono-Pen readings obtained from the affected cornea (34.8 (SD 14.0) mmHg) was consistently and significantly higher (p <0.001) than mean IOP obtained by the Tono-Pen from the non-affected area (14.8 (4.3) mmHg). The average of Goldmann tonometry readings (14.4 (6.1) mmHg) did not differ significantly from the Tono-Pen values obtained from the non-affected corneal area (p = 0.47) but was significantly lower than the Tono-Pen measurements obtained from the affected area (p <0.001) Conclusion. In patients with band keratopathy or glued corneas determination of IOP by Tono-Pen tonometry varies from affected to non-affected area. The Tono-Pen overestimates the level of IOP when it is applied to areas with band keratopathy or with glue.

Influence of fill factor variation in high shear granulation on the post granulation processes: Compression and tablet properties

This paper describes an investigation of the effect of fill factor; on the compaction behaviour of the granules during tableting and hence mechanical properties of tablets formed. The fill factor; which is the ratio of volume of wet powder material to vessel volume of the granulator, was used as an indicator of batch size. It has been established previously that in high shear granulation the batch size influences the size distribution and granule mechanical properties [1]. The work reported in this paper is an extension to the work presented in [1], hence granules from the same batches were used in production of tablets. The same tabletting conditions were employed during tabletting to allow a comparison of their properties. The compaction properties of the granules are inferred from the data generated during the tabletting process. The tablet strength and dissolution properties of the tablets were also measured. The results obtained show that the granule batch size affects the strength and dissolution of the tablets formed. The tablets produced from large batches were found to be weaker and had a faster dissolution rate. The fill factor was also found to affect the tablet to tablet variation of a non-functional active pharmaceutical ingredient included in the feed powder. Tablets produced from larger batches show greater variation compared to those from smaller batches.

Do print para o tablet. Estudo de caso da Revista Proteste

Actualmente o contacto com uma notícia é feito em rede e através de diversos media, o Papel, a Internet, a Televisão, os Telemóveis e os Tablets. Como dispositivo técnico de leitura de notícias os Tablets são uma plataforma que apresenta os conteúdos da notícia de uma revista de forma diferente. A informação é apresentada através de soluções visuais e com uma nova narrativa, diferente das revistas tradicionais. Os conteúdos estão mais fragmentados, o leitor pode ver um vídeo, ouvir uma música, seleccionar uma informação através de um sistema de “árvore de decisão” carregando num simples botão, aceder a um hyperlink ou simplesmente visualizar um slideshow. Todos estes recursos interativos estão disponíveis. Os números de venda de Tablets induzem a que muitas editoras se adaptem a esta inovação e que desenvolvam os seus produtos editoriais neste novo suporte. A revista Proteste, o principal produto da linha generalista que abrange todos os domínios do equipamento e os serviços destinados ao consumidor, da Editora DecoProteste Editores para a defesa do consumidor, LDA, necessita de migrar para estes dispositivos para cativar novos públicos. A presença desta revista nos Tablets está actualmente disponível através de um pdf com interação diminuta. Esta limitação será o ponto de partida deste trabalho de Projeto. A proposta terá um novo layout, que será estruturado com base na revista tradicional em papel, o objetivo é privilegiar a fácil usabilidade e apreensão dos conteúdos pelo leitor. A aplicação será concebida através de software compatível com o utilizado na produção da revista. Serão seleccionados conteúdos já publicados e identificadas as respectivas fontes. O projecto centrar-se-á no design de uma aplicação na qual serão criados todos os elementos interactivos de forma a introduzir uma nova narrativa/storytelling na publicação onde o consumidor possa interagir. A identificação com a revista em papel será muito forte através de uma nomenclatura que nos remeterá para os conteúdos disponibilizados em papel, nomeadamente as rubricas, os testes comparativos com designação de uma Escolha Acertada, que define a melhor relação “qualidade/preço”, bem como a selecção dos produtos e serviços com melhor desempenho. Os estudos de preços, outro dos sectores fundamentais da informação disponível em papel, também serão abordados. O modo como consumimos informação mudou. Com boas “histórias” em mãos e através dos meios tecnológicos disponíveis é a altura ideal para poder contá-las.

Online consumer behavior: The tablet shopper – A new kind of customer?

Tablet computers are on the rise and are increasingly superseding stationary computers in terms of modern online shopping. This paper therefore aims on understanding how tablet and website characteristics might impact online consumer behavior. The collected data resulted from focus groups and in-depth interviews conducted with a technology affine audience. It has shown that tablets indeed may have shifted shopping behavior from utilitarian towards rather recreational attributes. Discussions also revealed high customer expectations towards visited shopping websites and prevailing deficits. Thus, harnessing the concept of experiential flow is crucial. Compelling experiences are required to increase the duration of stay and consequently the likelihood of increased purchases.