Estimating the duration and cost of weed eradication programmes

Two prerequisites for realistically embarking upon an eradication programme are that cost-benefit analysis favours this strategy over other management options and that sufficient resources are available to carry the programme through to completion. These are not independent criteria, but it is our view that too little attention has been paid to estimating the investment required to complete weed eradication programmes. We deal with this problem by using a two-pronged approach: 1) developing a stochastic dynamic model that provides an estimation of programme duration; and 2) estimating the inputs required to delimit a weed incursion and to prevent weed reproduction over a sufficiently long period to allow extirpation of all infestations. The model is built upon relationships that capture the time-related detection of new infested areas, rates of progression of infestations from the active to the monitoring stage, rates of reversion of infestations from the monitoring to active stage, and the frequency distribution of time since last detection for all infestations. This approach is applied to the branched broomrape (Orobanche ramosa) eradication programme currently underway in South Australia. This programme commenced in 1999 and currently 7450 ha are known to be infested with the weed. To date none of the infestations have been eradicated. Given recent (2008) levels of investment and current eradication methods, model predictions are that it would take, on average, an additional 73 years to eradicate this weed at an average additional cost (NPV) of $AU67.9m. When the model was run for circumstances in 2003 and 2006, the average programme duration and total cost (NPV) were predicted to be 159 and 94 years, and $AU91.3m and $AU72.3m, respectively. The reduction in estimated programme length and cost may represent progress towards the eradication objective, although eradication of this species still remains a long term prospect.

A systematic literature review of alcohol education programmes in middle and high school settings (2000-2014)

Purpose Social marketing benchmark criteria were used to understand the extent to which single-substance alcohol education programmes targeting adolescents in middle and high school settings sought to change behaviour, utilised theory, included audience research and applied the market segmentation process. The paper aims to discuss these issues. Design/methodology/approach A systematic literature review retrieved a total of 1,495 identified articles; 565 duplicates were removed. The remaining 930 articles were then screened. Articles detailing formative research or programmes targeting multiple substances, parents, families and/or communities, as well as elementary schools and universities were excluded. A total of 31 articles, encompassing 16 qualifying programmes, were selected for detailed evaluation. Findings The majority of alcohol education programmes were developed on the basis of theory and achieved short- and medium-term behavioural effects. Importantly, most programmes were universal and did not apply the full market segmentation process. Limited audience research in the form of student involvement in programme design was identified. Research limitations/implications This systematic literature review focused on single-substance alcohol education programmes targeted at middle and high school student populations, retrieving studies back to the year 2000. Originality/value The results of this systematic literature review indicate that application of the social marketing benchmark criteria of market segmentation and audience research may represent an avenue for further extending alcohol education programme effectiveness in middle and high school settings.

Evaluating the performance of weed containment programmes

Aim: To develop approaches to the evaluation of programmes whose strategic objectives are to halt or slow weed spread. Location: Australia. Methods: Key aspects in the evaluation of weed containment programmes are considered. These include the relevance of models that predict the effects of management intervention on spread, the detection of spread, evidence for containment failure and metrics for absolute or partial containment. Case studies documenting either near-absolute (Orobanche ramosa L., branched broomrape) or partial (Parthenium hysterophorus (L.) King and Robinson, parthenium) containment are presented. Results: While useful for informing containment strategies, predictive models cannot be employed in containment programme evaluation owing to the highly stochastic nature of realized weed spread. The quality of observations is critical to the timely detection of weed spread. Effectiveness of surveillance and monitoring activities will be improved by utilizing information on habitat suitability and identification of sites from which spread could most compromise containment. Proof of containment failure may be difficult to obtain. The default option of assuming that a new detection represents containment failure could lead to an underestimate of containment success, the magnitude of which will depend on how often this assumption is made. Main conclusions: Evaluation of weed containment programmes will be relatively straightforward if containment is either absolute or near-absolute and may be based on total containment area and direct measures of containment failure, for example, levels of dispersal, establishment and reproduction beyond (but proximal to) the containment line. Where containment is only partial, other measures of containment effectiveness will be required. These may include changes in the rates of detection of new infestations following the institution of interventions designed to reduce dispersal, the degree of compliance with such interventions, and the effectiveness of tactics intended to reduce fecundity or other demographic drivers of spread. © 2012 Blackwell Publishing Ltd.

The need for cost-effectiveness analyses of antimicrobial stewardship programmes: A structured review

The cost effectiveness of antimicrobial stewardship (AMS) programmes was reviewed in hospital settings of Organisation for Economic Co-operation and Development (OECD) countries, and limited to adult patient populations. In each of the 36 studies, the type of AMS strategy and the clinical and cost outcomes were evaluated. The main AMS strategy implemented was prospective audit with intervention and feedback (PAIF), followed by the use of rapid technology, including rapid polymerase chain reaction (PCR)-based methods and matrix-assisted laser desorption/ionisation time-of-flight (MALDI-TOF) technology, for the treatment of bloodstream infections. All but one of the 36 studies reported that AMS resulted in a reduction in pharmacy expenditure. Among 27 studies measuring changes to health outcomes, either no change was reported post-AMS, or the additional benefits achieved from these outcomes were not quantified. Only two studies performed a full economic evaluation: one on a PAIF-based AMS intervention; and the other on use of rapid technology for the selection of appropriate treatment for serious Staphylococcus aureus infections. Both studies found the interventions to be cost effective. AMS programmes achieved a reduction in pharmacy expenditure, but there was a lack of consistency in the reported cost outcomes making it difficult to compare between interventions. A failure to capture complete costs in terms of resource use makes it difficult to determine the true cost of these interventions. There is an urgent need for full economic evaluations that compare relative changes both in clinical and cost outcomes to enable identification of the most cost-effective AMS strategies in hospitals.

Auditing design and innovation programmes within a multinational insurance provider

The financial services industry is key to the success of the Australian economy, however even established businesses need to continually push to innovate. At present, design is becoming widely accepted as means to innovate and many companies currently have design and innovation programmes. The goal of these programmes is to foster a design capability amongst staff members. However, little is known as to the impact of the innovation capabilities such design programmes claim to instil. Therefore, this paper seeks to investigate how a financial services firm is currently attempting to build a design capability amongst staff members. Using a case study approach the research team audited four design capability programmes currently being deployed by the case firm. The study highlights the strengths and weaknesses of current efforts by the firm and current barriers to achieving design capability. The implications of this paper include key insights for both academics and industry.

HIV outbreak among injecting drug users in Finland

An HIV outbreak among Finnish injecting drug users (IDUs) occurred in 1998. By the end of 2005, 282 IDUs were in-fected, most of them by recombinant virus CRF01_AE of HIV. After a rapid spread, the outbreak subsided, and the prevalence of HIV among IDUs remained low (<2%). The purpose of the study was to describe the outbreak in order to recognise factors that have influenced the spread and restriction of the outbreak, and thus to find tools for HIV preven-tion. Data on Finnish IDUs newly diagnosed HIV-positive between 1998 and 2005 was collected through interviews and patient documents. Study I compared markers of disease progression between 93 Finnish IDUs and 63 Dutch IDUs. In study II, geographical spread of the HIV outbreak was examined and compared with the spatial distribution of employed males. In study III, risk behaviour data from interviews of 89 HIV-positive and 207 HIV-negative IDUs was linked, and prevalence and risk factors for unprotected sex were evaluated. In study IV, data on 238 newly diagnosed IDUs was combined with data on 675 sexually transmitted HIV cases, and risk factors for late HIV diagnosis (CD4 cell count <200/µL, or AIDS at HIV diagnosis) were analysed. Finnish IDUs infected with CRF01_AE exhibited higher viral loads than did Amsterdam IDUs infected with subtype B, but there was no difference in CD4 development. The Finnish IDU outbreak spread and was restricted socially in a marginalised IDU population and geographically in areas characterised by low proportions of employed males. Up to 40% of the cases in the two clusters outside the city centre had no contact with the centre, where needle exchange services were available since 1997. Up to 63% of HIV-positive and 80% of HIV-negative sexually active IDUs reported inconsistent condom use, which was associated with steady relationships and recent inpatient addiction care. Com-pared to other transmission groups, HIV-positive IDUs were diagnosed earlier in their infection. The proportion of late diagnosed HIV cases in all transmission groups was 23%, but was only 6% among IDUs diagnosed during the first four years of the epidemic. The high viral load in early HIV infection may have contributed to the rapid spread of recombinant virus in the Finnish outbreak. The outbreak was restricted to a marginalised IDU population, and limited spatially to local pockets of pov-erty. To prevent HIV among IDUs, these pockets should be recognised and reached early through outreach work and the distribution of needle exchange and other prevention activities. To prevent the sexual transmission of HIV among IDUs, prevention programmes should be combined with addiction care services and targeted at every IDU. The early detection of the outbreak and early implementation of needle exchange programmes likely played a crucial role in re-versing the IDU outbreak.

Gasifier stoves - science, technology and field outreach

Development of a new class of single pan high efficiency, low emission stoves, named gasifier stoves, that promise constant power that can be controlled using any solid biomass fuel in the form of pellets is reported here. These stoves use battery-run fan-based air supply for gasification (primary air) and for combustion (secondary air).Design with the correct secondary air flow ensures near-stoichiometric combustion that allows attainment of peak combustion temperatures with accompanying high water boiling efficiencies (up to 50% for vessels of practical relevance) and very low emissions (of carbon monoxide, particulate matter and oxides of nitrogen). The use of high density agro-residue based pellets or coconut shell pieces ensures operational duration of about an hour or more at power levels of 3 kWth (similar to 12 g/min). The principles involved and the optimization aspects of the design are outlined. The dependence of efficiency and emissions on the design parameters are described. The field imperatives that drive the choice of the rechargeable battery source and the fan are brought out. The implications of developments of Oorja-Plus and OorjaSuper stoves to the domestic cooking scenario of India are briefly discussed. The process development, testing and internal qualification tasks were undertaken by Indian Institute of Science. Product development and the fuel pellet production were dealt with by First Energy Private Ltd.Close interaction at several times during this period has helped progress the project from the laboratory to large scale commercial operation. At this time, over four hundred thousand stoves and 30 kilotonnes fuel have been sold in four states in India.

Indian Nanoelectronics Users Program An Outreach Vehicle to Expedite Nanoelectronics Research in India

The worldwide research in nanoelectronics is motivated by the fact that scaling of MOSFETs by conventional top down approach will not continue for ever due to fundamental limits imposed by physics even if it is delayed for some more years. The research community in this domain has largely become multidisciplinary trying to discover novel transistor structures built with novel materials so that semiconductor industry can continue to follow its projected roadmap. However, setting up and running a nanoelectronics facility for research is hugely expensive. Therefore it is a common model to setup a central networked facility that can be shared with large number of users across the research community. The Centres for Excellence in Nanoelectronics (CEN) at Indian Institute of Science, Bangalore (IISc) and Indian Institute of Technology, Bombay (IITB) are such central networked facilities setup with funding of about USD 20 million from the Department of Information Technology (DIT), Ministry of Communications and Information Technology (MCIT), Government of India, in 2005. Indian Nanoelectronics Users Program (INUP) is a missionary program not only to spread awareness and provide training in nanoelectronics but also to provide easy access to the latest facilities at CEN in IISc and at IITB for the wider nanoelectronics research community in India. This program, also funded by MCIT, aims to train researchers by conducting workshops, hands-on training programs, and providing access to CEN facilities. This is a unique program aiming to expedite nanoelectronics research in the country, as the funding for projects required for projects proposed by researchers from around India has prior financial approval from the government and requires only technical approval by the IISc/ IITB team. This paper discusses the objectives of INUP, gives brief descriptions of CEN facilities, the training programs conducted by INUP and list various research activities currently under way in the program.

Seafood safety: economics of Hazard Analysis and Critical Control Point (HACCP) programmes

Seventy percent of the world's catch of fish and fishery products is consumed as food. Fish and shellfish products represent 15.6 percent of animal protein supply and 5.6 percent of total protein supply on a worldwide basis. Developing countries account for almost 50 percent of global fish exports. Seafood-borne disease or illness outbreaks affect consumers both physically and financially, and create regulatory problems for both importing and exporting countries. Seafood safety as a commodity cannot be purchased in the marketplace and government intervenes to regulate the safety and quality of seafood. Theoretical issues and data limitations create problems in estimating what consumers will pay for seafood safety and quality. The costs and benefits of seafood safety must be considered at all levels, including the fishers, fish farmers, input suppliers to fishing, processing and trade, seafood processors, seafood distributors, consumers and government. Hazard Analysis Critical Control Point (HACCP) programmes are being implemented on a worldwide basis for seafood. Studies have been completed to estimate the cost of HACCP in various shrimp, fish and shellfish plants in the United States, and are underway for some seafood plants in the United Kingdom, Canada and Africa. Major developments within the last two decades have created a set of complex trading situations for seafood. Current events indicate that seafood safety and quality can be used as non-tariff barriers to free trade. Research priorities necessary to estimate the economic value and impacts of achieving safer seafood are outlined at the consumer, seafood production and processing, trade and government levels. An extensive list of references on the economics of seafood safety and quality is presented. (PDF contains 56 pages; captured from html.)

Relevance of the programmes of the federal fisheries schools to Nigeria's fishing industry

Nigeria's three federal fisheries schools are administered by three autonomous research institutes located in Lagos, New Bussa, and Maiduguri. The schools were established at different periods to train the required manpower for Nigeria's fishing industry which has remained predominantly artisanal since its inception in 1942 as a Second World War exigency. Despite the establishment of the schools, the industry's manpower is still being dominated by non-nationals especially in the capture fisheries sub-sector. The common features of the schools include the apparent insensitivity of their programmes to the industry's dynamic manpower needs; the absence of coordination of their programmes by a national body which would have ensured that the schools are able to communicate with one another and are willing to act and share a purpose. The need and the methodology for a change of emphasis from the on-going training of extension agents and officers to that of fishing operatives and technicians to enable Nigeria effectively harness her local fish resources towards self-sufficiency is highlighted.

Credit financing of aquaculture programmes -- a review

A discussion is presented on the role of credit financing in the development of aquaculture programmes in Nigeria. The constraints militating against credit availability to aquaculture vis-a-vis the competition between aquaculture and other agricultural and industrial sectors for the allocation of available credit facilities are examined. Possible ways of enhancing preferential allocation of capital to the aquaculture industry from the various sources of credit available to the Nigerial agricultural economy are suggested

Analyses physico-chimiques des eaux de la Lagune Ebrié effectuées de 1979 à 1981 au cours des programmes "Variabilité interannuelle" et "Baie de Biétri"

Physico-chemical data collections aimed to assess the interannual variability of the lagoon hydroclimate and the impact of an airport dam on the water quality of the Ebrié lagoon.