Pozzolanic activity of oil-refining catalyst: evaluation by electron and atomic microscopy

The reuse of waste fluid catalytic cracking (FCC) catalyst as partial surrogate for cement can reduce the environmental impact of both the oil-refinery and cement production industries [1,2]. FCC catalysts can be considered as pozzolanic materials since in the presence of water they tend to chemically react with calcium hydroxide to produce compounds possessing cementitious properties [3,4]. In addition, partial replacement of cement with FCC catalysts can enhance the performance of pastes and mortars, namely by improving their compressive strength [5,6]. In the present work the reaction of waste FCC catalyst with Ca(OH)2 has been investigated after a curing time of 28 days by scanning electron microscopy (SEM) with electron backscattered signal (BSE) combined with X-ray energy dispersive spectroscopy (EDS) carried out with a JEOL JSM 7001F instrument operated at 15 kV coupled to an INCA pentaFetx3 Oxford spectrometer. The polished cross-sections of FCC particles embedded in resin have also been evaluated by atomic force microscopy (AFM) in contact mode (CM) using a NanoSurf EasyScan 2 instrument. The SEM/EDS results revealed that an inward migration of Ca occurred during the reaction. A weaker outward migration of Si and Al was also apparent (Fig. 1). The migration of Ca was not homogeneous and tended to follow high-diffusivity paths within the porous waste FCC catalyst particles. The present study suggests that the porosity of waste FCC catalysts is key for the migration/reaction of Ca from the surrounding matrix, playing an important role in the pozzolanic activity of the system. The topography images and surface roughness parameters obtained by atomic force microscopy can be used to infer the local porosity in waste FCC catalyst particles (Fig. 2).

Ergosterol as a rapid measurement of Ganoderma rot of oil palm

Palm oil (PO) is a very important commodity for many countries and especially Indonesia and Malaysia who are the predominant producers. PO is used in ca. 30% of supermarket foods, cosmetics, cooking and as biodiesel. The growth of oil palms in plantations is controversial as the production methods contribute to climate change and cause environmental damage [1]. The plant is subjected to a devastating disease in these two countries caused by the white rot fungus Ganoderma. There are no satisfactory methods to diagnose the disease in the plant as they are too slow and/or inaccurate. The lipid compound ergosterol is unique to fungi and is used to measure growth especially in solid substrates. We report here on the use of ergosterol to measure the growth of Ganoderma in oil palms using HPLC and TLC methods [2]. The method is rapid and correlates well with other methods and is capable of being used on-site, hence improving the speed of analysis and allowing remedial action. Climate change will affect the health of OP [1] and rapid detection methods will be increasingly required to control the disease. [1] Paterson, RRM, Kumar, L, Taylor, S, Lima N. Future climate effects on suitability for growth of oil palms in Malaysia and Indonesia. Scientific Reports, 5, 2015, 14457. [2] Muniroh, MS, Sariah M, Zainal Abidin, MA, Lima, N, Paterson, RRM. Rapid detection of Ganoderma-infected oil palms by microwave ergosterol extraction with HPLC and TLC. Journal of Microbiological Methods, 100, 2014, 143–147.

Aromatic amines sources, environmental impact and remediation

Aromatic amines are widely used industrial chemicals as their major sources in the environment include several chemical industry sectors such as oil refining, synthetic polymers, dyes, adhesives, rubbers, perfume, pharmaceuticals, pesticides and explosives. They result also from diesel exhaust, combustion of wood chips and rubber and tobacco smoke. Some types of aromatic amines are generated during cooking, special grilled meat and fish, as well. The intensive use and production of these compounds explains its occurrence in the environment such as in air, water and soil, thereby creating a potential for human exposure. Since aromatic amines are potential carcinogenic and toxic agents, they constitute an important class of environmental pollutants of enormous concern, which efficient removal is a crucial task for researchers, so several methods have been investigated and applied. In this chapter the types and general properties of aromatic amine compounds are reviewed. As aromatic amines are continuously entering the environment from various sources and have been designated as high priority pollutants, their presence in the environment must be monitored at concentration levels lower than 30 mg L1, compatible with the limits allowed by the regulations. Consequently, most relevant analytical methods to detect the aromatic amines composition in environmental matrices, and for monitoring their degradation, are essential and will be presented. Those include Spectroscopy, namely UV/visible and Fourier Transform Infrared Spectroscopy (FTIR); Chromatography, in particular Thin Layer (TLC), High Performance Liquid (HPLC) and Gas chromatography (GC); Capillary electrophoresis (CE); Mass spectrometry (MS) and combination of different methods including GC-MS, HPLC-MS and CE-MS. Choosing the best methods depend on their availability, costs, detection limit and sample concentration, which sometimes need to be concentrate or pretreated. However, combined methods may give more complete results based on the complementary information. The environmental impact, toxicity and carcinogenicity of many aromatic amines have been reported and are emphasized in this chapter too. Lately, the conventional aromatic amines degradation and the alternative biodegradation processes are highlighted. Parameters affecting biodegradation, role of different electron acceptors in aerobic and anaerobic biodegradation and kinetics are discussed. Conventional processes including extraction, adsorption onto activated carbon, chemical oxidation, advanced oxidation, electrochemical techniques and irradiation suffer from drawbacks including high costs, formation of hazardous by-products and low efficiency. Biological processes, taking advantage of the naturally processes occurring in environment, have been developed and tested, proved as an economic, energy efficient and environmentally feasible alternative. Aerobic biodegradation is one of the most promising techniques for aromatic amines remediation, but has the drawback of aromatic amines autooxidation once they are exposed to oxygen, instead of their degradation. Higher costs, especially due to power consumption for aeration, can also limit its application. Anaerobic degradation technology is the novel path for treatment of a wide variety of aromatic amines, including industrial wastewater, and will be discussed. However, some are difficult to degrade under anaerobic conditions and, thus, other electron acceptors such as nitrate, iron, sulphate, manganese and carbonate have, alternatively, been tested.

Linkages of dietary patterns, international trade and land use: the case of olive oil in the European Union

Within only two decades olive oil developed from a niche product which could hardly be found in food stores outside the producing regions towards an integrated component in the diets of industrial countries. This paper discusses the impacts of the promotion of the “healthy Mediterranean diet” on land use and agro-ecosystems in the producing countries. It examines the dynamics of olive oil production, trade and consumption in the EU15 in the period 1972 to 2003 and the links between dietary patterns, trade and land use. It analyses the underlying socio-economic driving forces behind the increasing spatial disconnect between production and consumption of olive oil in the EU15 and in particular in Spain, the world largest producer during the last three decades. In the observed period olive oil consumption increased 16 fold in the non-producing EU15 countries. In the geographically limited producing regions like Spain, the 5 fold increase in export production was associated with the rapid industrialization of olive production, the conversion of vast Mediterranean landscapes to olive monocultures and a range of environmental pressures. High amounts of subsidies of the European Common Agricultural Policy and feedback loops within production and consumption systems were driving the transformation of the olive oil system. Our analysis indicates the process of change was not immediately driven by increases in demand for olive oil in non-producing countries, but rather by the institutional setting of the European Union and by concerted political interventions.

Effects of short-term high-fructose diets in humans: modulation by environmental factors

It is currently suspected that sugar overconsumption, and more specifically fructose, may promote the development of obesity and of several cardio-metabolic disorders. However, environmental factors, such as fish oil and dietary proteins, may prevent some deleterious effects of fructose. The aim of this thesis was to identify potential environmental factors that may modulate the metabolic effects of fructose. The first study was designed to evaluate the impact of endurance exercise in healthy young men fed a high-fructose, isocaloric diet. Fructose-induced effects on lipid profile were totally prevented by endurance exercise and may be explained by an enhanced clearance of TRL-TG and the inhibition of de novo lipogenesis. As energy intake was adjusted to energy requirement, we can conclude that exercise acts on fructose metabolism independently of energy imbalance. The second study aimed at determining whether coffee and more specifically chlorogenic acid consumption may prevent fructose-induced intrahepatic lipids accumulation, hypertriglyceridemia and hepatic insulin resistance, through a stimulation of lipid oxidation. Coffee did not prevent the fructose-induced increase in IHCL or plasma TG. Interestingly, the three coffees tested prevented the decrease in hepatic insulin sensitivity, independently of their content in caffeine or chlorogenic acid. Finally, in the third study, we evaluated the effect of essential amino acid supplementation on the increase of hepatic lipids induced by a high-fructose diet. This intervention slightly decreased IHCL concentration. The exact mechanisms remain unidentified but may involve an increased secretion of VLDL-TG. In conclusion, the environmental factors evaluated allow to prevent some of the deleterious effects of fructose and suggest that recommendations on fructose consumption should also take into account environmental factors.

The capital gains from trade are not enough: Evidence from the environmental accounts of Venezuela and Mexico

In principle, a country can not endure negative genuine savings for longperiods of time without experiencing declining consumption. Nevertheless,theoreticians envisage two alternatives to explain how an exporter ofnon-renewable natural resources could experience permanent negativegenuine savings and still ensure sustainability. The first one allegesthat the capital gains arising from the expected improvement in theterms of trade would suffice to compensate for the negative savings ofthe resource exporter. The second alternative points at technologicalchange as a way to avoid economic collapse. This paper uses the dataof Venezuela and Mexico to empirically test the first of these twohypotheses. The results presented here prove that the terms oftrade do not suffice to compensate the depletion of oil reservesin these two open economies.

The role of mycorrhizas in more sustainable oil palm cultivation

Oil palm is a significant and developing crop in many developing countries. The introduction of oil palm puts pressure on natural resources because it is often planted in cleared-cut land that previously supported other crops or was forested. This has led to environmental concerns which require attention. Hence it is important that new plantations are managed in a sustainable way to reduce the impact of oil palm cultivation on ecosystems whilst maximising yield and productivity to farmers. The application of arbuscular mycorrhizal fungi (AMF) technology is one option that can benefit both agronomic plant health and ecosystems. AMF have the potential to increase conventional agricultural productivity and are crucial for the sustainable functioning of agricultural ecosystems. This paper provides an insight into how AMF application might benefit oil palm cultivation through more sustainable management and the practical use of AMF for oil palm plantations.

The effect of sub-lethal doses of Azadirachta indica (Meliaceae) oil on the midgut of Spodoptera frugiperda (Lepidoptera, Noctuidae)

The fall armyworm, Spodoptera frugiperda, is one of the major field pests for maize production. It is mainly controlled by means of synthetic, and more recently by resistant cultivar of maize expressing Bt toxins. The neem tree, Azadirachta indica, is a plant that can potentially control insects with the advantage of being food and environmental safe. The aim of this study was to assess the effect of neem oil on the development and survival of S. frugiperda caterpillars by assessing histological alterations caused on their midgut. Newly hatched caterpillars were submitted to three neem oil concentrations: 0.006; 0.05; 0.4%, which were added to their artificial diet. Ten 3rd instar caterpillars, taken from each treatment, were submitted to histological analysis. The alimentary canals from the specimens were fixed in Baker for 12 hours, desiccated and diaphanized in alcohol/xylol (1:1) and xylol. After placing the samples in paraffin, they were sliced in 8 µm sections and stained with hematoxylin-eosin stain. The neem oil added to the diet of S. frugiperda caused total mortality at dose of 0.4% whilst still in the first instars, prolonged the larval and pupal stages, and reduced the pupal weight. Histo-physiological alterations such as degeneration of the epithelial lining of the midgut and in the peritrophic matrix were found at all concentrations of neem oil.

Molecular analysis of the bacterial diversity in a specialized consortium for diesel oil degradation

Diesel oil is a compound derived from petroleum, consisting primarily of hydrocarbons. Poor conditions in transportation and storage of this product can contribute significantly to accidental spills causing serious ecological problems in soil and water and affecting the diversity of the microbial environment. The cloning and sequencing of the 16S rRNA gene is one of the molecular techniques that allows estimation and comparison of the microbial diversity in different environmental samples. The aim of this work was to estimate the diversity of microorganisms from the Bacteria domain in a consortium specialized in diesel oil degradation through partial sequencing of the 16S rRNA gene. After the extraction of DNA metagenomics, the material was amplified by PCR reaction using specific oligonucleotide primers for the 16S rRNA gene. The PCR products were cloned into a pGEM-T-Easy vector (Promega), and Escherichia coli was used as the host cell for recombinant DNAs. The partial clone sequencing was obtained using universal oligonucleotide primers from the vector. The genetic library obtained generated 431 clones. All the sequenced clones presented similarity to phylum Proteobacteria, with Gammaproteobacteria the most present group (49.8 % of the clones), followed by Alphaproteobacteira (44.8 %) and Betaproteobacteria (5.4 %). The Pseudomonas genus was the most abundant in the metagenomic library, followed by the Parvibaculum and the Sphingobium genus, respectively. After partial sequencing of the 16S rRNA, the diversity of the bacterial consortium was estimated using DOTUR software. When comparing these sequences to the database from the National Center for Biotechnology Information (NCBI), a strong correlation was found between the data generated by the software used and the data deposited in NCBI.

First day of an oil spill on the open sea: early mass transfers of hydrocarbons to air and water.

During the first hours after release of petroleum at sea, crude oil hydrocarbons partition rapidly into air and water. However, limited information is available about very early evaporation and dissolution processes. We report on the composition of the oil slick during the first day after a permitted, unrestrained 4.3 m(3) oil release conducted on the North Sea. Rapid mass transfers of volatile and soluble hydrocarbons were observed, with >50% of ≤C17 hydrocarbons disappearing within 25 h from this oil slick of <10 km(2) area and <10 μm thickness. For oil sheen, >50% losses of ≤C16 hydrocarbons were observed after 1 h. We developed a mass transfer model to describe the evolution of oil slick chemical composition and water column hydrocarbon concentrations. The model was parametrized based on environmental conditions and hydrocarbon partitioning properties estimated from comprehensive two-dimensional gas chromatography (GC×GC) retention data. The model correctly predicted the observed fractionation of petroleum hydrocarbons in the oil slick resulting from evaporation and dissolution. This is the first report on the broad-spectrum compositional changes in oil during the first day of a spill at the sea surface. Expected outcomes under other environmental conditions are discussed, as well as comparisons to other models.

Environmental pollution promotes selection of microbial degradation pathways

Astonishing as it may seem, one organism's waste is often ideal food for another. Many waste products generated by human activities are routinely degraded by microorganisms under controlled conditions during waste-water treatment. Toxic pollutants resulting from inadvertent releases, such as oil spills, are also consumed by bacteria, the simplest organisms on Earth. Biodegradation of toxic or particularly persistent compounds, however, remains problematic. What has escaped the attention of many is that bacteria exposed to pollutants can adapt to them by mutating or acquiring degradative genes. These bacteria can proliferate in the environment as a result of the selection pressures created by pollutants. The positive outcome of selection pressure is that harmful compounds may eventually be broken down completely through biodegradation. The downside is that biodegradation may require extremely long periods of time. Although the adaptation process has been shown to be reproducible, it remains very difficult to predict.