856 resultados para Occupational Health and Industrial Hygiene
Resumo:
This investigation assessed the applicability of Dr. William Haddon’s strategies for controlling hazards involving materials-handling operations in industrial and mining workplaces. Published over 20 years ago, Haddon’s strategies purport to include all strategies for preventing and mitigating harm to people, property, and the environment. Students in an undergraduate class were assigned to find tactical examples of each of Haddon’s strategies applicable to material handling. Haddon’s tenth strategy involving medical care and rehabilitation was not included. Their classifications were analyzed to identify points of confusion as well as points of general agreement. Students found numerous tactics for strategies involving engineering and behavioral strategies. Fewer tactics were identified for strategies involving damage control through effective and timely response.
Resumo:
An experiment examined five signal words on safety signs for effectiveness at communicating information about severity of a hazard. Perceived severity was rated by 59 college students for the signal words Deadly, Danger, Warning, Caution, and Notice. Results indicated that Deadly communicated the highest ratings for severity. Danger was second. Warning and Caution were tied for third. The lowest ratings were for Notice.
Resumo:
This paper describes a case study of a labor-based ergonomics-training program that makes use of some effective worker training methods. The program focus was on ergonomics awareness and back injury prevention for nursing home workers. It was developed and conducted by a not-for-profit organization affiliated with the Service Employees International Union. Training methods included the train-the-trainer model and the small group activity method. The investigation also compared the program components with those identified by the Occupational Safety and Health Administration (OSHA) as being key elements in effective safety training.
Resumo:
Most studies of warning signs involve undergraduate students as subjects. This paper reports a direct comparison of findings from an undergraduate population and an employed population. The 48 employed subjects from this study were compared with 59 undergraduate subjects from a companion study. Subjects from both populations were shown the same signs and asked to rate the severity level connoted by each sign. The signs differed only in signal word. Results for each population indicated that signal word had a highly significant effect on severity ratings. When the two populations were compared for ratings of each signal word, the only significant difference was for Caution. Median ratings of each population were the same: Deadly (4), Danger (3), Warning (2), Caution (1), and Notice (0).
Resumo:
Run overs caused by falls from tractors and trailing equipment are one of the more serious unintentional injuries on farms. These types of falls are particularly common for older farmers and children, but everyone can be at risk, given the right conditions. Do your part to prevent falls from machinery by adopting safe practices.
Resumo:
A Similar Exposure Group (SEG) can be created through the evaluation of workers performing the same or similar task, hazards they are exposed to, frequency and duration of their exposures, engineering controls available during their operations, personal protective equipment used, and exposure data. For this report, the samples of one facility that has collected nearly 40,000 various types of samples will be evaluated to determine if the creation of a SEG can be supported. The data will be reviewed for consistency with collection methods and laboratory detection limits. A subset of the samples may be selected based on the review. Data will also be statistically evaluated in order to determine whether the data is sufficient to terminate the sampling. IHDataAnalyst V1.27 will be used to assess the data. This program uses Bayesian Analysis to assist in making determinations. The 95 percent confidence interval will be calculated and evaluated in making decisions. This evaluation will be used to determine if a SEG can be created for any of the workers and determine the need for future sample collection. The data and evaluation presented in this report have been selected and evaluated specifically for the purposes of this project.
Resumo:
Exposure to diesel particulate matter from diesel exhaust has been shown to have adverse health effects in humans. In 2012 The International Agency for Research on Cancer classified diesel exhaust as a group 1 know human carcinogen. Because of the associated health effects, there has been a strong push to reduce the amount of diesel exhaust present in the mining industry. Biodiesel is one to the more common and promising control options used to reduce the amount of diesel particulate matter that is generated during fuel combustion. The use of biodiesel over petroleum diesel has been shown to reduce not only particulate matter, but hydro carbon and carbon monoxide mass emissions as well. Personal and area samples were collected at an underground metal mine in the northwestern United States to evaluate the current blend of B70 biodiesel. The objective of this research was to evaluate the carbon levels associated with diesel particulate matter generated from the combustion of a B70 biodiesel. Data was also compared to past studies on which diesel particulate matter from petroleum diesel was evaluated. Samples were taken on four separate four day campaigns between March and October of 2014. Area samples were taken from 7 different areas in the mine and personal samples were taken from a 20 person cohort. The equipment used for sampling was compliant with the NIOSH 5040 method. Statistical analysis of the results was done using Minitab 17 software. The statistical analysis showed that the total carbon concentrations from biodiesel were well below the MSHA exposure limit. Results also showed that organic/elemental carbon ratios were consistent with past studies as the concentrations of organic carbon were significantly higher than those of elemental carbon.
Resumo:
The Mine Improvement and New Emergency Response (MINER) Act of 2006 implemented new regulations in the underground coal mining industry that allow for the certification of non-compressed gas equipment for respiratory protection in underground coal mines. NASA’s Kennedy Space Center (KSC) Biomedical Research and Engineering Laboratory (BRL) is investigating the potential to expand cryogenic air supply systems into the mining and general industries. These investigations have, so far, resulted in four separate comparison and hardware development programs. The Propellant Handlers Ensemble (PHE) and Level “A” Ensemble Comparison (LAE): This study compared worker thermal stress while using the industry standard Level A hazardous material handling ensemble as opposed to using the similarly protective Propellant Handler’s Ensemble (PHE) that utilizes a cryogenic air supply pack, known as an Environmental Control Unit (ECU) as opposed to the compressed air Self Contained Breathing Apparatus (SCBA) used in the LAE. The research found that, in a 102°F environment, test subjects experienced significantly decreased body temperature increases, significantly decreased heart rate increases, and decreased sweat loss while performing a standard work routine while using the PHE, compared to the same test subjects performing the same routine while using the LAE. The Cryogenic Refuge Alternative Supply System (CryoRASS) project: The MINER Act of 2006 requires the operators of underground coal mines to provide refuge alternatives that can provide a safe atmosphere for workers for up to 96 hours in the event of a mine emergency. The CryoRASS project retrofitted an existing refuge chamber with a liquid air supply instead of the standard compressed air supply system and performed a 96 hour test. The CryoRASS system demonstrated that it provided a larger air supply in a significantly smaller footprint area, provided humidity and temperature control, and maintained acceptable oxygen and carbon dioxide levels in the chamber for the required amount of time. SCBA and Mine Rescue System (CryoBA/CryoASFS) Another requirement of the MINER Act is that additional emergency breathing equipment must be staged along evacuation routes to supplement the Self Contained/Self Rescue (SCSR) devices that are now required. The BRL has developed an SCBA known as the Cryogenic Breathing Apparatus (CryoBA), that has the ability to provide 2 hours of breathing air, a refill capability, and some cooling for the user. Cryogenic Air Storage and Filling Stations (CryoASFS) would be positioned in critical areas to extend evacuation time. The CryoASFS stations have a significantly smaller footprint and larger air storage capacity to similar compressed air systems. The CryoBA pack is currently undergoing NIOSH certification testing. Technical challenges associated with liquid breathing air systems: Research done by the BRL has also addressed three major technical challenges involved with the widespread use of liquid breathing air. The BRL developed a storage Dewar fitted with a Cryorefrigerator that has stored liquid air for four months with no appreciable oxygen enrichment due to differential evaporation. Testing of liquid breathing air was material and time intensive. A BRL contract developed a system that only required 1 liter of air and five minutes of time compared to the 10 liters of air and 75 minutes of time required by the old method. The BRL also developed a simple and cost effective method of manufacturing liquid air that joins a liquid oxygen tanker with a liquid nitrogen tanker through an orifice controlled “Y” fitting, mixing the two components, and depositing the mixed breathing air in a separate tanker.
Resumo:
This report examines the Genesis II irradiator made by Gray*Star Incorporated, Mississippi Department of Health radiation safety regulations, and Nuclear Regulatory Commission (NRC) inspection guidelines for irradiators. The purpose for this report is to evaluate any hazards which may lead to a catastrophic water loss, evaluate protective action distances during a reduced shielding situation, and evaluate the safety engineering measures incorporated by Mississippi and Federal regulations to ensure the mitigation of risk for pool irradiators. Due to safeguard controls prohibiting release of precise data on emergency response measures and radioactivity of the isotopes utilized this report will be focused on regulations mandating specific engineering controls and manufacturer recommended guidelines for best practices.
Resumo:
BACKGROUND: This project addressed an unresolved issue involving measurement methods for determining step uniformity. Leading experts on stairway safety agree that lack of step uniformity within a flight contributes to risk of missteps. A relatively new method for precisely measuring step dimensions is the nosing-to-nosing method. An issue in applying the method is lack of agreement on the lateral location to make the measurements. That location depends on where stairway users ascend and descend relative to the width of the steps. A prior investigator examined people descending to determine the lateral distance between the handrail center and the mid-line of the person’s body. He found the median was 44 cm. AIM: The two objectives of the experiment were to: (1) determine if a different set of stairway users will have the same median lateral distance from the handrail as those described in the prior observational study, and (2) determine if the lateral distance of participants is affected by their direction of travel and use of a handrail. METHODS: The investigators established visible distance markers on one stairway in a campus building and videotaped volunteer students ascending and descending the flight of stairs. Each of the 16 participant ascended with and without using the handrail, and each descended with and without using the handrail. Images were printed and analyzed to determine their lateral distance between the inner edge of the handrail and a point midway between the participant’s knees. Results were analyzed statistically to test hypotheses corresponding to the two objectives. RESULTS: The previous study found a median lateral distance of 44 cm when measured from the center of the handrail. Using comparable data, the median found in this study was 25 cm. Results of this study indicated that lateral distance from the handrail is significantly affected by the direction of travel and by use of the handrail. The greatest lateral distance was for ascending with the handrail. The shortest lateral distance was for descending without the handrail. VALUE: Committees develop and periodically revise standards for stairways leading to fire exits and workplace facilities. The practical value of this project is providing empirical evidence that standard developing committees may consider when convening to update their requirements and guidelines on how to measure step uniformity.
Resumo:
The role of the occupational health nurse is broad and includes health care provider, manager/coordinator, educator/advisor, and case manager and consultant, depending on the type of industry and the country in which the nurse practices. Regardless of the type of role, the occupational health nurse must participate in continuing nursing education (CNE) activities. This study describes the roles, credentials, and number of CNE activities undertaken by occupational health nurses working in Ontario, Canada. Using a non-experimental descriptive design, a questionnaire was mailed to all practicing occupational health nurses who are members (n = 900) of a local nursing association. Three hundred fifty-four questionnaires were returned. Nurses reported a variety of roles in the following categories: case management, health promotion, policy development, infection control/travel health, ergonomics, education, research, health and safety, direct care, consultation, disaster preparedness, and industrial hygiene. Sixty-five percent of nurses held an occupational health nurse credential, and 19% of nurses attended more than 100 hours of CNE annually. Occupational health nurses have multiple workplace roles. Many attend CNE activities and they often prepare for credentialing.
Resumo:
The institutional and regulatory interlinkages between industrial relations (IR) and occupational health and safety (OHS) are seldom explored in the IR literature. This article begins to address this gap by examining regulatory initiatives in Australia during a period of neoliberal government. It examines the laws enacted by the federal government during this period and events and cases arising from these laws that go some way to illustrating their effects. Evidence is also drawn from detailed research on a number of state OHS inspectorates between 2004 and 2006. It is argued that de-collectivist changes to IR laws exacerbated problems posed by the growth of flexible work arrangements and a drop in union density, weakening participatory provisions in OHS laws and promoting work arrangements that undermined OHS standards. The study provides evidence of the implications of a divergence in the trajectory of IR and OHS laws and the importance of better integrating worker protection laws.
Resumo:
Occupational asthma is the most common form of reported occupational respiratory disease in many industrialized countries. Recent studies show that environmental exposures account for up to 40% of the cases of asthma and that 2% to 15% of all cases of asthma are attributable to occupational exposures. In the dental workplace, dental hygienists are exposed to hazardous substances. Among these hazards are respiratory sensitizers, irritants and infectious agents. A cross-sectional study of Texas dental hygienists was conducted to assess the prevalence of occupational asthma. Registered dietitians were surveyed as a comparison group, because this group is similar in demographic makeup to dental hygienists, but conducts no clinical treatment with associated hazardous exposures. Neither the questionnaire survey nor the cover letter revealed the focus of this investigation. Three hundred and thirty five dental hygienists licensed to practice in the state of Texas as of January 1, 1999, and 320 dietitians that are also licensed by the state of Texas were randomly selected. (Abstract shortened by UMI.)^