Dynamic characterisation of four nine-story large-panel R.C. buildings in Bishkek (Kyrgyzstan): A comparison between experimental ambient vibration analysis and numerical finite element modeling

With the outlook of improving seismic vulnerability assessment for the city of Bishkek (Kyrgyzstan), the global dynamic behaviour of four nine-storey r.c. large-panel buildings in elastic regime is studied. The four buildings were built during the Soviet era within a serial production system. Since they all belong to the same series, they have very similar geometries both in plan and in height. Firstly, ambient vibration measurements are performed in the four buildings. The data analysis composed of discrete Fourier transform, modal analysis (frequency domain decomposition) and deconvolution interferometry, yields the modal characteristics and an estimate of the linear impulse response function for the structures of the four buildings. Then, finite element models are set up for all four buildings and the results of the numerical modal analysis are compared with the experimental ones. The numerical models are finally calibrated considering the first three global modes and their results match the experimental ones with an error of less then 20%.

Scientific Production on Open Access : A Worldwide Bibliometric Analysis in the Academic and Scientific Context

This research aims to diachronically analyze the worldwide scientific production on open access, in the academic and scientific context, in order to contribute to knowledge and visualization of its main actors. As a method, bibliographical, descriptive and analytical research was used, with the contribution of bibliometric studies, especially the production indicators, scientific collaboration and indicators of thematic co-occurrence. The Scopus database was used as a source to retrieve the articles on the subject, with a resulting corpus of 1179 articles. Using Bibexcel software, frequency tables were constructed for the variables, and Pajek software was used to visualize the collaboration network and VoSViewer for the construction of the keywords' network. As for the results, the most productive researchers come from countries such as the United States, Canada, France and Spain. Journals with higher impact in the academic community have disseminated the new constructed knowledge. A collaborative network with a few subnets where co-authors are from different countries has been observed. As conclusions, this study allows identifying the themes of debates that mark the development of open access at the international level, and it is possible to state that open access is one of the new emerging and frontier fields of library and information science

Scientific Production on Open Access : A Worldwide Bibliometric Analysis in the Academic and Scientific Context

This research aims to diachronically analyze the worldwide scientific production on open access, in the academic and scientific context, in order to contribute to knowledge and visualization of its main actors. As a method, bibliographical, descriptive and analytical research was used, with the contribution of bibliometric studies, especially the production indicators, scientific collaboration and indicators of thematic co-occurrence. The Scopus database was used as a source to retrieve the articles on the subject, with a resulting corpus of 1179 articles. Using Bibexcel software, frequency tables were constructed for the variables, and Pajek software was used to visualize the collaboration network and VoSViewer for the construction of the keywords' network. As for the results, the most productive researchers come from countries such as the United States, Canada, France and Spain. Journals with higher impact in the academic community have disseminated the new constructed knowledge. A collaborative network with a few subnets where co-authors are from different countries has been observed. As conclusions, this study allows identifying the themes of debates that mark the development of open access at the international level, and it is possible to state that open access is one of the new emerging and frontier fields of library and information science

Scientific Production on Open Access : A Worldwide Bibliometric Analysis in the Academic and Scientific Context

This research aims to diachronically analyze the worldwide scientific production on open access, in the academic and scientific context, in order to contribute to knowledge and visualization of its main actors. As a method, bibliographical, descriptive and analytical research was used, with the contribution of bibliometric studies, especially the production indicators, scientific collaboration and indicators of thematic co-occurrence. The Scopus database was used as a source to retrieve the articles on the subject, with a resulting corpus of 1179 articles. Using Bibexcel software, frequency tables were constructed for the variables, and Pajek software was used to visualize the collaboration network and VoSViewer for the construction of the keywords' network. As for the results, the most productive researchers come from countries such as the United States, Canada, France and Spain. Journals with higher impact in the academic community have disseminated the new constructed knowledge. A collaborative network with a few subnets where co-authors are from different countries has been observed. As conclusions, this study allows identifying the themes of debates that mark the development of open access at the international level, and it is possible to state that open access is one of the new emerging and frontier fields of library and information science

Theoretical analysis and numerical verification of the consistency of viscous smoothed-particle-hydrodynamics formulations in simulating free-surface flows

The theoretical formulation of the smoothed particle hydrodynamics (SPH) method deserves great care because of some inconsistencies occurring when considering free-surface inviscid flows. Actually, in SPH formulations one usually assumes that (i) surface integral terms on the boundary of the interpolation kernel support are neglected, (ii) free-surface conditions are implicitly verified. These assumptions are studied in detail in the present work for free-surface Newtonian viscous flow. The consistency of classical viscous weakly compressible SPH formulations is investigated. In particular, the principle of virtual work is used to study the verification of the free-surface boundary conditions in a weak sense. The latter can be related to the global energy dissipation induced by the viscous term formulations and their consistency. Numerical verification of this theoretical analysis is provided on three free-surface test cases including a standing wave, with the three viscous term formulations investigated.

Coupling time-stepping numerical methods and standard aerodynamics codes for instability analysis of flows in complex geometries

The development of a global instability analysis code coupling a time-stepping approach, as applied to the solution of BiGlobal and TriGlobal instability analysis 1, 2 and finite-volume-based spatial discretization, as used in standard aerodynamics codes is presented. The key advantage of the time-stepping method over matrix-formulation approaches is that the former provides a solution to the computer-storage issues associated with the latter methodology. To-date both approaches are successfully in use to analyze instability in complex geometries, although their relative advantages have never been quantified. The ultimate goal of the present work is to address this issue in the context of spatial discretization schemes typically used in industry. The time-stepping approach of Chiba 3 has been implemented in conjunction with two direct numerical simulation algorithms, one based on the typically-used in this context high-order method and another based on low-order methods representative of those in common use in industry. The two codes have been validated with solutions of the BiGlobal EVP and it has been showed that small errors in the base flow do not have affect significantly the results. As a result, a three-dimensional compressible unsteady second-order code for global linear stability has been successfully developed based on finite-volume spatial discretization and time-stepping method with the ability to study complex geometries by means of unstructured and hybrid meshes

Efficient numerical methods for global linear instability. Analysis and modeling of non-orthogonal swept attachment-line boundary layer flow

The aim of this thesis is to study the mechanisms of instability that occur in swept wings when the angle of attack increases. For this, a simplified model for the a simplified model for the non-orthogonal swept leading edge boundary layer has been used as well as different numerical techniques in order to solve the linear stability problem that describes the behavior of perturbations superposed upon this base flow. Two different approaches, matrix-free and matrix forming methods, have been validated using direct numerical simulations with spectral resolution. In this way, flow instability in the non-orthogonal swept attachment-line boundary layer is addressed in a linear analysis framework via the solution of the pertinent global (Bi-Global) PDE-based eigenvalue problem. Subsequently, a simple extension of the extended G¨ortler-H¨ammerlin ODEbased polynomial model proposed by Theofilis, Fedorov, Obrist & Dallmann (2003) for orthogonal flow, which includes previous models as particular cases and recovers global instability analysis results, is presented for non-orthogonal flow. Direct numerical simulations have been used to verify the stability results and unravel the limits of validity of the basic flow model analyzed. The effect of the angle of attack, AoA, on the critical conditions of the non-orthogonal problem has been documented; an increase of the angle of attack, from AoA = 0 (orthogonal flow) up to values close to _/2 which make the assumptions under which the basic flow is derived questionable, is found to systematically destabilize the flow. The critical conditions of non-orthogonal flows at 0 _ AoA _ _/2 are shown to be recoverable from those of orthogonal flow, via a simple analytical transformation involving AoA. These results can help to understand the mechanisms of destabilization that occurs in the attachment line of wings at finite angles of attack. Studies taking into account variations of the pressure field in the basic flow or the extension to compressible flows are issues that remain open. El objetivo de esta tesis es estudiar los mecanismos de la inestabilidad que se producen en ciertos dispositivos aerodinámicos cuando se aumenta el ángulo de ataque. Para ello se ha utilizado un modelo simplificado del flujo de base, así como diferentes técnicas numéricas, con el fin de resolver el problema de estabilidad lineal asociado que describe el comportamiento de las perturbaciones. Estos métodos; sin y con formación de matriz, se han validado utilizando simulaciones numéricas directas con resolución espectral. De esta manera, la inestabilidad del flujo de capa límite laminar oblicuo entorno a la línea de estancamiento se aborda en un marco de análisis lineal por medio del método Bi-Global de resolución del problema de valores propios en derivadas parciales. Posteriormente se propone una extensión simple para el flujo no-ortogonal del modelo polinomial de ecuaciones diferenciales ordinarias, G¨ortler-H¨ammerlin extendido, propuesto por Theofilis et al. (2003) para el flujo ortogonal, que incluye los modelos previos como casos particulares y recupera los resultados del analisis global de estabilidad lineal. Se han realizado simulaciones directas con el fin de verificar los resultados del análisis de estabilidad así como para investigar los límites de validez del modelo de flujo base utilizado. En este trabajo se ha documentado el efecto del ángulo de ataque AoA en las condiciones críticas del problema no ortogonal obteniendo que el incremento del ángulo de ataque, de AoA = 0 (flujo ortogonal) hasta valores próximos a _/2, en el cual las hipótesis sobre las que se basa el flujo base dejan de ser válidas, tiende sistemáticamente a desestabilizar el flujo. Las condiciones críticas del caso no ortogonal 0 _ AoA _ _/2 pueden recuperarse a partir del caso ortogonal mediante el uso de una transformación analítica simple que implica el ángulo de ataque AoA. Estos resultados pueden ayudar a comprender los mecanismos de desestabilización que se producen en el borde de ataque de las alas de los aviones a ángulos de ataque finitos. Como tareas pendientes quedaría realizar estudios que tengan en cuenta variaciones del campo de presión en el flujo base así como la extensión de éste al caso de flujos compresibles.

Experimental and numerical analysis of concrete Slabs subjected to Blast

This paper summarizes the research activities focused on the behaviour of concrete and concrete structures subjected to blast loading carried out by the Department of Materials Science of the Technical University of Madrid (PUM). These activities comprise the design and construction of a test bench that allows for testing up to four planar concrete specimens with one single explosion, the study of the performance of different protection concepts for concrete structures and, finally, the development of a numerical model for the simulation of concrete structural elements subjected to blast. Up to date 6 different types of concrete have been studied, from plain normal strength concrete, to high strength concrete, including also fibre reinforced concretes with different types of fibres. The numerical model is based on the Cohesive Crack Model approach, and has been developed for the LSDYNA finite element code through a user programmed subroutine. Despite its simplicity, the model is able to predict the failure patterns of the concrete slabs tested with a high level of accuracy

Numerical analysis of shell and spatial structures

Since the advent of the computer into the engineering field, the application of the numerical methods to the solution of engineering problems has grown very rapidly. Among the different computer methods of structural analysis the Finite Element (FEM) has been predominantly used. Shells and space structures are very attractive and have been constructed to solve a large variety of functional problems (roofs, industrial building, aqueducts, reservoirs, footings etc). In this type of structures aesthetics, structural efficiency and concept play a very important role. This class of structures can be divided into three main groups, namely continuous (concrete) shells, space frames and tension (fabric, pneumatic, cable etc )structures. In the following only the current applications of the FEM to the analysis of continuous shell structures will be discussed. However, some of the comments on this class of shells can be also applied to some extend to the others, but obviously specific computational problems will be restricted to the continuous shells. Different aspects, such as, the type of elements,input-output computational techniques etc, of the analysis of shells by the FEM will be described below. Clearly, the improvements and developments occurring in general for the FEM since its first appearance in the fifties have had a significative impact on the particular class of structures under discussion.

Los Angeles and Long Beach Harbors model study : numerical analysis of tidal circulation for the 2020 Master Plan /

"June 1984."

Problems for the numerical analysis of the future; [papers presented at the symposium on modern calculating machinery and numerical methods, held on July 29-31, 1948, at the University of California, Los Angeles]

Includes bibliographies.

A new analysis of chronology and geography, history and prophecy : in which their elements are attempted to be explained, harmonized and vindicated, upon scriptural and scientific principles ... /

Mode of access: Internet.

OMNITAB : a computer program for statistical and numerical analysis /

Includes bibliographies and index.

Influence apart from Adoption: How Interaction between Programming and Scientific Practices Shapes Modes of Inquiry in Four Oceanography Teams

Thesis (Ph.D.)--University of Washington, 2016-06