Modelação de processos e implementação de ferramentas de Planeamento e Controlo da Produção numa empresa de produção de resguardos de banho

Dissertação de mestrado em Engenharia Industrial

Simulação numérica do comportamento ao impacto de componentes para calçado de segurança

Dissertação de mestrado integrado em Engenharia Mecânica

Development of composite auxetic structures for civil engineering applications

Tese de Doutoramento em Engenharia Têxtil

Triatoma mexicana (Hemiptera: Reduviidae) in Guanajuato, Mexico: house infestation and seasonal variation

Triatoma mexicana was described by Herrich-Schaeffer in 1848. In 1940, a male specimen was found in Hidalgo. In 1970, this species was recorded in the state of Queretaro. Later, it was registered in Guanajuato and San Luis Potosi. In the present paper we performed an investigation in 545 dwellings from three counties in the state of Guanajuato, Mexico, from March 2003 to May 2004. The search and capture of triatomines were seasonally performed indoors and outdoors. Entomological indexes were calculated. The risk and no risk relations between triatomine presence and housing construction materials were analyzed. Fourteen triatomines were collected indoors and 151 outdoors. The vectors were collected in houses built with either risky and non-risky materials. Adults go indoors but do not settle there, hence, no relationship was found between the building materials and infestation of houses. Conventional interventions like house improvement or insecticide spraying are not efficient for the control of T. mexicana, because its developmental cycle is accomplished outdoors in the area surrounding the houses.

Acoustic transport of charge and spins in GaAs-based heterostructures

Report for the scientific sojourn carried out at the Paul Drude Institut für Festkörperelektronik of the Stanford University, USA, from 2010 to 2012. The objective of this project is the transport and control of electronic charge and spin along GaAs-based semiconductor heterostructures. The electronic transport has been achieved by taking advantage of the piezolectric field induced by surface acoustic waves in non-centrosymmetric materials like GaAs. This piezolectric field separates photogenerated electrons and holes at different positions along the acoustic wave, where they acummulate and are transported at the same velocity as the wave. Two different kinds of structures have been studied: quantum wells grown along the (110) direction, both intrinsic and n-doped, as well as GaAs nanowires. The analysis of the charge acoustic transport was performed by micro-photoluminescence, whereas the detection of the spin transport was done either by analyzing the polarization state of the emitted photoluminescence or by Kerr reflectometry. Our results in GaAs quantum wells show that charge and spin transport is clearly observed at the non-doped structures,obtaining spin lifetimes of the order of several nanoseconds, whereas no acoutically induced spin transport was detected for the n-doped quantum wells. In the GaAs nanowires, we were able of transporting successfully both electrons and holes along the nanowire axis, but no conservation of the spin polarization has been observed until now. The photoluminescence emitted by these structures after acoustic transport, however, shows anti-bunching characteristics, making this system a very good candidate for its use as single photon emitters.

The labor market effects of payroll taxes in a middle-income country: Evidence from Colombia

We use a panel of manufacturing plants from Colombia to analyze how the risein payroll tax rates over the 1980 s and 1990 s affected the labor market.Our estimates indicate that formal wages fall by between 1.4% and 2.3% as aresult of a 10% rise in payroll taxes. This 'less-than-full-shifting' islikely to be the result of weak linkages between benefits and taxes and thepresence of downward wage rigidities induced by a binding minimum wage inColombia. Because the costs of taxation are only partly shifted fromemployers to employees, employment should also fall. Our results indicatethat a 10% increase in payroll taxes lowered formal employment by between4% and 5%. In addition, we find less shifting and larger disemploymenteffects for production than non-production workers. These results suggestthat policies aimed at boosting the relative demand of low-skill workers byreducing social security taxes on those with low earnings may be effectivein a country like Colombia, especially if tax cuts are targeted to indirectbenefits.

Sprinkle Treatment of Asphalt Pavements, MLR-78-01, 1978

The paper reviews methods, materials, equipment and results to date of sprinkle treatment within the state. The Iowa Department of Transportation formerly the Iowa State Highway Commission, made its first attempts at sprinkle treatment of fresh asphalt concrete in 1974. Increased emphasis in mix design of asphalt mixes and aggregate selection of durable non-polishing materials has generated costly restrictions on the use of local materials. During the summer of 1975, a dual spinner, tail-gate spreader was mounted on a standard departmental dump truck to attempt additional sprinkle treatment on a section of Iowa 7 west of Ft. Dodge. The dump truck equipment was marginally satisfactory, but results of increased surface skid texture and durability were well demonstrated. On 1976 a new, current order dump truck was modified with an auxiliary transmission and a set of slick surfaced tires, and dual spinner spreader was mounted to again attempt surface sprinkle treatment, which was conducted in 1977.

Development of Paperboard Forming Tools with a Focus on Intelligent Manufacturing

Tämä diplomityö käsittelee kartonginmuovaukseen käytettävien puristintyökalujen kehittämistä. Työntavoitteina oli kehittää työkalutekniikan suunnittelua ja valmistusta edullisemmaksi, nopeammaksi ja työkaluja toiminnoiltaan tehokkaammiksi. Työn tuli sisältää myös ohjeet työkalujen suunnittelemiseksi ja valmistamiseksi jatkoa ajatellen. Työn aikana selvitettiin mahdollisia työkalurakennevaihtoehtoja, valmistusmateriaaleja sekä niiden käsittelymenetelmiä ja lastuamista sekä sen tarjoamia mahdollisuuksia valmistusmenetelmänä. Työkalupari suunniteltiin modulaariseksi siten, että uusia työkaluja varten vain osa komponenteista täytyy valmistaa uudelleen, samalla työkalun osien lukumäärää pienennettiin merkittävästi. Valmistusmateriaaliksi valittiin hyvin lastuttava työkaluteräs ja sen koneistaminen tapahtui vaakakaraisessa koneistuskeskuksessa. Työn loppuvaiheessa työkalukokonaisuudelle tehtiin kustannuslaskelma jaoteltuna eri työvaiheille sekä komponenteittain. Työkalu asennettiin puristimeen ja sille suoritettiin käyttötestaus. Työn aikana karttuneen kokemuksen sekä koekäytön perusteella tehtiin jatkokehitysehdotuksia.

Kalsium-käsittelyn vaikutus materiaalin lastuttavuuteen vannesahauksessa

Diplomityö käsittelee aiemmin Suomessa vähän tutkittua metallin vannesahausta. Työ keskittyy lähinnä tangon sahaukseen vaakatyyppisellä vannesahalla. Työn teoriaosuudessa luodaan silmäys erityyppisiin vannesahoihin ja perehdytään tarkemmin terän teoriaan, mm. terän valmistukseen, terämateriaaleihin, geometriaan, erilaisiin hammasmuotoihin sekä haritukseen. Lisäksi käsitellään lastuamisparametreja ja lastuamisvoimia vannesahauksessa. Tarkasteltavana on myös vannesahauksen kustannusrakenne ja sen muodostuminen. Kokeellisessa osiossa tutkitaan teräksille suoritettavan lastuttavuutta parantavan kalsium-käsittelyn vaikutusta sahattavuuteen. Kalsium-käsittely parantaa sahattavuutta 15-80 % käytettävästä terämateriaalista ja tarkastelutavasta riippuen. Kokeellisessa osiossa suoritetaan myös terävertailu kolmen eri terän välillä. Terävertailulla pyritään löytämään kustannustehokkain, eli pienimmän kustannuksen katkaisua kohti tuottava terä vertailuun valittujen vaihtoehtojen joukosta. Kustannustehokkaimmaksi teräksi osoittautui Amadan Super HLG M42 Bi-metalliterä.

Spend-analyysin toteuttaminen ja hyödyntäminen hankintatoimen kehittämisessä epäsuorien hankintojen osalta

Tutkimuksen tavoitteena oli selvittää, miten spend-analyysiä voidaan hyödyntää hankintatoimen kehittämisessä epäsuorien hankintojen osalta. Tutkimuksessa hyödynnettiin kohdeyrityksessä spend-analyysin toteuttamiseen kehitettyä työvälinettä, jonka avulla aikaa ja resursseja vievä datan kerääminen useista toiminnanohjausjärjestelmistä on saatu automatisoitua. Tutkimus suoritettiin toimintatutkimuksena, jonka lisäksi tietoa kohdeyrityksestä ja spend-analyysin käytöstä kerättiin kyselyillä. Kirjallisuutta tutkittiin niiltä osin, kun sen katsottiin tukevan tutkimusta. Tutkimuksen tuloksena havaittiin, että spend-analyysi luo pohjan hankintatoimen kehittämiselle. Spend-analyysiä voidaan hyödyntää hankintojen seuraamisessa, osana toimittajien hallinnointia, synergiaetujen löytämisessä, hankintojen hallinnoinnissa, kustannusten hallinnoinnissa, toiminnan suunnittelussa sekä suunnitelmien seurannassa, sopimusten noudattamisen seurannassa, kustannustietoisuuden parantamisessa sekä päätöksenteossa hyödynnettävän informaation tuottamiseksi. Lisäksi havaittiin, että kohdeyrityksessä käytössä olevaa työvälinettä voidaan kehittää spend-analyysin laadun parantamiseksi esimerkiksi yhdenmukaistamalla kirjauskäytäntöjä.

The effects of real time control of welding parameters on weld quality in plasma arc keyhole welding

Joints intended for welding frequently show variations in geometry and position, for which it is unfortunately not possible to apply a single set of operating parameters to ensure constant quality. The cause of this difficulty lies in a number of factors, including inaccurate joint preparation and joint fit up, tack welds, as well as thermal distortion of the workpiece. In plasma arc keyhole welding of butt joints, deviations in the gap width may cause weld defects such as an incomplete weld bead, excessive penetration and burn through. Manual adjustment of welding parameters to compensate for variations in the gap width is very difficult, and unsatisfactory weld quality is often obtained. In this study a control system for plasma arc keyhole welding has been developed and used to study the effects of the real time control of welding parameters on gap tolerance during welding of austenitic stainless steel AISI 304L. The welding tests demonstrated the beneficial effect of real time control on weld quality. Compared with welding using constant parameters, the maximum tolerable gap width with an acceptable weld quality was 47% higher when using the real time controlled parameters for a plate thickness of 5 mm. In addition, burn through occurred with significantly larger gap widths when parameters were controlled in real time. Increased gap tolerance enables joints to be prepared and fit up less accurately, saving time and preparation costs for welding. In addition to the control system, a novel technique for back face monitoring is described in this study. The test results showed that the technique could be successfully applied for penetration monitoring when welding non magnetic materials. The results also imply that it is possible to measure the dimensions of the plasma efflux or weld root, and use this information in a feedback control system and, thus, maintain the required weld quality.

A Practical Micro Mechanical Model Based Local Approach Methodology for the Analysis of Ductile Fracture of Welded T-Joints

This thesis concentrates on developing a practical local approach methodology based on micro mechanical models for the analysis of ductile fracture of welded joints. Two major problems involved in the local approach, namely the dilational constitutive relation reflecting the softening behaviour of material, and the failure criterion associated with the constitutive equation, have been studied in detail. Firstly, considerable efforts were made on the numerical integration and computer implementation for the non trivial dilational Gurson Tvergaard model. Considering the weaknesses of the widely used Euler forward integration algorithms, a family of generalized mid point algorithms is proposed for the Gurson Tvergaard model. Correspondingly, based on the decomposition of stresses into hydrostatic and deviatoric parts, an explicit seven parameter expression for the consistent tangent moduli of the algorithms is presented. This explicit formula avoids any matrix inversion during numerical iteration and thus greatly facilitates the computer implementation of the algorithms and increase the efficiency of the code. The accuracy of the proposed algorithms and other conventional algorithms has been assessed in a systematic manner in order to highlight the best algorithm for this study. The accurate and efficient performance of present finite element implementation of the proposed algorithms has been demonstrated by various numerical examples. It has been found that the true mid point algorithm (a = 0.5) is the most accurate one when the deviatoric strain increment is radial to the yield surface and it is very important to use the consistent tangent moduli in the Newton iteration procedure. Secondly, an assessment of the consistency of current local failure criteria for ductile fracture, the critical void growth criterion, the constant critical void volume fraction criterion and Thomason's plastic limit load failure criterion, has been made. Significant differences in the predictions of ductility by the three criteria were found. By assuming the void grows spherically and using the void volume fraction from the Gurson Tvergaard model to calculate the current void matrix geometry, Thomason's failure criterion has been modified and a new failure criterion for the Gurson Tvergaard model is presented. Comparison with Koplik and Needleman's finite element results shows that the new failure criterion is fairly accurate indeed. A novel feature of the new failure criterion is that a mechanism for void coalescence is incorporated into the constitutive model. Hence the material failure is a natural result of the development of macroscopic plastic flow and the microscopic internal necking mechanism. By the new failure criterion, the critical void volume fraction is not a material constant and the initial void volume fraction and/or void nucleation parameters essentially control the material failure. This feature is very desirable and makes the numerical calibration of void nucleation parameters(s) possible and physically sound. Thirdly, a local approach methodology based on the above two major contributions has been built up in ABAQUS via the user material subroutine UMAT and applied to welded T joints. By using the void nucleation parameters calibrated from simple smooth and notched specimens, it was found that the fracture behaviour of the welded T joints can be well predicted using present methodology. This application has shown how the damage parameters of both base material and heat affected zone (HAZ) material can be obtained in a step by step manner and how useful and capable the local approach methodology is in the analysis of fracture behaviour and crack development as well as structural integrity assessment of practical problems where non homogeneous materials are involved. Finally, a procedure for the possible engineering application of the present methodology is suggested and discussed.

Kevyiden rakennemateriaalien soveltamismahdollisuudet metsäkoneissa

Asiakkaiden ympäristötietoisuus, metsäkoneille asetettavat korkeat vaatimukset ja kiristyvä kilpailu pakottavat metsäkoneiden valmistajat etsimään vaihtoehtoisia valmistusmateriaaleja, joita käyttämällä metsäkoneet kevenevät ja sitä kautta niiden ympäristökuormitukset ja käyttökustannukset alenevat ja kapasiteetti kasvaa. Metsäkoneiden rakenteiden keventämisessä alumiini on yksi varteenotettava vaihtoehto teräksen korvaajaksi, sillä alumiinin ominaisuus/paino -suhde on terästä parempi. Alumiinin käyttöä hitsatuissa rakenteissa ovat rajoittaneet sen korkea hinta ja melko huono väsymiskestävyys. Diplomityön tavoitteena on ollut selvittää mahdollisuuksia korvata metsäkoneiden rakenteista löytyviä teräksestä valmistettuja osia alumiinista valmistetuilla osilla. Diplomityön teoriaosassa on käsitelty rakenteiden keventämistä, metsäkoneille asetettavia vaatimuksia, alumiinien materiaaliominaisuuksia, alumiinirakenteiden valmistuksessa käytettäviä menetelmiä sekä alumiinirakenteiden suunnittelua. Lisäksi teoriaosassa on käsitelty komposiittien materiaaliominaisuuksia ja komposiittirakenteiden suunnittelua. Diplomityön kokeellisessa osassa on vertailtu nykyisiä rakennemateriaaleja ja alumiineja metsäkoneen eri osien rakennemateriaaleina osien vaatimusprofiileihin ja materiaalien ominaisuusprofiileihin perustuen. Vaatimusprofiilien perusteella on laadittu ominaisuusprofiilit alumiineille ja teräksille. Sovittamalla vaatimus- ja ominaisuusprofiilit yhteen arvoanalyysin avulla, metsäkoneista on etsitty mahdollisia kohteita, joissa nykyinen rakennemateriaali voitaisiin korvata alumiinilla. Tältä pohjalta metsäkoneista löytyi rakenteita, joissa alumiinin käyttö rakennemateriaalina teräksen sijaan olisi mahdollista. Diplomityö toimii hyvänä pohjana tutkittaessa mahdollisuuksia metsäkoneiden rakenteiden keventämiseksi.

PREPARAÇÃO DE PONTOS DE CARBONO E SUA CARACTERIZAÇÃO ÓPTICA: UM EXPERIMENTO PARA INTRODUZIR NANOCIÊNCIA NA GRADUAÇÃO

Carbon dots (CDs) constitute a new class of carbon-based nanomaterials that measure less than 10 nm and display attractive physical and chemical features such as fluorescence. CDs have been considered the new “power” carbon nanomaterials since their accidental discovery in 2004. This study reports a simple, easy, and accessible experiment for undergraduate courses. The experiment involves the preparation of CDs by pyrolysis using commercial gelatin as a low cost precursor as well as CD purification and optical characterization. The optical properties of CDs such as absorption and emission properties make them a promising material for teaching the basic concepts and techniques used for characterization of nanomaterials. Also, the reactants and final product are suitable for undergraduate courses since they are non-toxic materials. The prepared CDs can be used in such applications as bioimaging, solar cells, and photocatalysis.

Composite artistry in the Book of Numbers : a study in biblical narrative conventions

The present thesis discusses the coherence or lack of coherence in the book of Numbers, with special regard to its narrative features. The fragmented nature of Numbers is a well-known problem in research on the book, affecting how we approach and interpret it, but to date there has not been any thorough investigation of the narrative features of the work and how they might contribute to the coherence or the lack of coherence in the book. The discussion is pursued in light of narrative theory, and especially in connection to three parameters that are typically understood to be invoked in the interpretation of narratives: 1) a narrative paradigm, or ‘story,’ meaning events related to each other temporally, causally, and thematically, in a plot with a beginning, middle, and end; 2) discourse, being the expression plane of a narrative, or the devices that an author has at hand in constructing a narrative; 3) the situation or languagegame of the narrative, prototypical examples being factual reports, which seeks to depict a state of affairs, and storytelling narratives, driven by a demand for tellability. In view of these parameters the present thesis argues that it is reasonable to form four groups to describe the narrative material of Numbers: genuine narratives (e.g. Num 12), independent narrative sequences (e.g. Num 5:1-4), instrumental scenes and situations (e.g. Num 27:1-5), and narrative fragments (e.g. Num 18:1). These groups are mixed throughout with non-narrative materials. Seen together, however, the narrative features of these groups can be understood to create an attenuated narrative sequence from beginning to end in Numbers, where one thing happens after another. This sequence, termed the ‘larger story’ of Numbers, concerns the wandering of Israel from Sinai to Moab. Furthermore, the larger story has a fragmented plot. The end-point is fixed on the promised land, Israel prepares for the wandering towards it (Num 1-10), rebels against wandering and the promise and is sent back into the wilderness (Num 13-14), returns again after forty years (Num 21ff.), and prepares for conquering the land (Num 22-36). Finally, themes of the promised land, generational succession, and obedience-disobedience, operate in this larger story. Purity is also a significant theme in the book, albeit not connected to plot in the larger story. All in all, sequence, plot, and theme in the larger story of Numbers can be understood to bring some coherence to the book. However, neither aspect entirely subsumes the whole book, and the four groups of narrative materials can also be understood to underscore the incoherence of the work in differentiating its variegated narrative contents. Numbers should therefore be described as an anthology of different materials that are loosely connected through its narrative features in the larger story, with the aim of informing Israelite identity by depicting a certain period in the early history of the people.