934 resultados para NMR single-sided Compartmentalization Cells 2D_NMR Diffusion-Relaxation
Resumo:
In a global approach combining fluorescence recovery after photobleaching (FRAP), fluorescence correlation spectroscopy (FCS), and fluorescence resonance energy transfer (FRET), we address the behavior in living cells of the peroxisome proliferator-activated receptors (PPARs), a family of nuclear receptors involved in lipid and glucose metabolism, inflammation control, and wound healing. We first demonstrate that unlike several other nuclear receptors, PPARs do not form speckles upon ligand activation. The subnuclear structures that may be observed under some experimental conditions result from overexpression of the protein and our immunolabeling experiments suggest that these structures are subjected to degradation by the proteasome. Interestingly and in contrast to a general assumption, PPARs readily heterodimerize with retinoid X receptor (RXR) in the absence of ligand in living cells. PPAR diffusion coefficients indicate that all the receptors are engaged in complexes of very high molecular masses and/or interact with relatively immobile nuclear components. PPARs are not immobilized by ligand binding. However, they exhibit a ligand-induced reduction of mobility, probably due to enhanced interactions with cofactors and/or chromatin. Our study draws attention to the limitations and pitfalls of fluorescent chimera imaging and demonstrates the usefulness of the combination of FCS, FRAP, and FRET to assess the behavior of nuclear receptors and their mode of action in living cells.
Resumo:
The mechanism by which the immune system produces effector and memory T cells is largely unclear. To allow a large-scale assessment of the development of single naive T cells into different subsets, we have developed a technology that introduces unique genetic tags (barcodes) into naive T cells. By comparing the barcodes present in antigen-specific effector and memory T cell populations in systemic and local infection models, at different anatomical sites, and for TCR-pMHC interactions of different avidities, we demonstrate that under all conditions tested, individual naive T cells yield both effector and memory CD8+ T cell progeny. This indicates that effector and memory fate decisions are not determined by the nature of the priming antigen-presenting cell or the time of T cell priming. Instead, for both low and high avidity T cells, individual naive T cells have multiple fates and can differentiate into effector and memory T cell subsets.
Resumo:
T cells expressing T cell receptor (TCR) complexes that lack CD3 delta, either due to deletion of the CD3 delta gene, or by replacement of the connecting peptide of the TCR alpha chain, exhibit severely impaired positive selection and TCR-mediated activation of CD8 single-positive T cells. Because the same defects have been observed in mice expressing no CD8 beta or tailless CD8 beta, we examined whether CD3 delta serves to couple TCR.CD3 with CD8. To this end we used T cell hybridomas and transgenic mice expressing the T1 TCR, which recognizes a photoreactive derivative of the PbCS 252-260 peptide in the context of H-2K(d). We report that, in thymocytes and hybridomas expressing the T1 TCR.CD3 complex, CD8 alpha beta associates with the TCR. This association was not observed on T1 hybridomas expressing only CD8 alpha alpha or a CD3 delta(-) variant of the T1 TCR. CD3 delta was selectively co-immunoprecipitated with anti-CD8 antibodies, indicating an avid association of CD8 with CD3 delta. Because CD8 alpha beta is a raft constituent, due to this association a fraction of TCR.CD3 is raft-associated. Cross-linking of these TCR-CD8 adducts results in extensive TCR aggregate formation and intracellular calcium mobilization. Thus, CD3 delta couples TCR.CD3 with raft-associated CD8, which is required for effective activation and positive selection of CD8(+) T cells.
Resumo:
The mechanism by which the immune system produces effector and memory T cells is largely unclear. To allow a large-scale assessment of the development of single naive T cells into different subsets, we have developed a technology that introduces unique genetic tags (barcodes) into naive T cells. By comparing the barcodes present in antigen-specific effector and memory T cell populations in systemic and local infection models, at different anatomical sites, and for TCR-pMHC interactions of different avidities, we demonstrate that under all conditions tested, individual naive T cells yield both effector and memory CD8+ T cell progeny. This indicates that effector and memory fate decisions are not determined by the nature of the priming antigen-presenting cell or the time of T cell priming. Instead, for both low and high avidity T cells, individual naive T cells have multiple fates and can differentiate into effector and memory T cell subsets.
Resumo:
In order to study the various health influencing parameters related to engineered nanoparticles as well as to soot emitted b diesel engines, there is an urgent need for appropriate sampling devices and methods for cell exposure studies that simulate the respiratory system and facilitate associated biological and toxicological tests. The objective of the present work was the further advancement of a Multiculture Exposure Chamber (MEC) into a dose-controlled system for efficient delivery of nanoparticles to cells. It was validated with various types of nanoparticles (diesel engine soot aggregates, engineered nanoparticles for various applications) and with state-of-the-art nanoparticle measurement instrumentation to assess the local deposition of nanoparticles on the cell cultures. The dose of nanoparticles to which cell cultures are being exposed was evaluated in the normal operation of the in vitro cell culture exposure chamber based on measurements of the size specific nanoparticle collection efficiency of a cell free device. The average efficiency in delivering nanoparticles in the MEC was approximately 82%. The nanoparticle deposition was demonstrated by Transmission Electron Microscopy (TEM). Analysis and design of the MEC employs Computational Fluid Dynamics (CFD) and true to geometry representations of nanoparticles with the aim to assess the uniformity of nanoparticle deposition among the culture wells. Final testing of the dose-controlled cell exposure system was performed by exposing A549 lung cell cultures to fluorescently labeled nanoparticles. Delivery of aerosolized nanoparticles was demonstrated by visualization of the nanoparticle fluorescence in the cell cultures following exposure. Also monitored was the potential of the aerosolized nanoparticles to generate reactive oxygen species (ROS) (e.g. free radicals and peroxides generation), thus expressing the oxidative stress of the cells which can cause extensive cellular damage or damage on DNA.
Resumo:
Most odors in natural environments are mixtures of several compounds. Perceptually, these can blend into a new "perfume," or some components may dominate as elements of the mixture. In order to understand such mixture interactions, it is necessary to study the events at the olfactory periphery, down to the level of single-odorant receptor cells. Does a strong ligand present at a low concentration outweigh the effect of weak ligands present at high concentrations? We used the fruit fly receptor dOr22a and a banana-like odor mixture as a model system. We show that an intermediate ligand at an intermediate concentration alone elicits the neuron's blend response, despite the presence of both weaker ligands at higher concentration, and of better ligands at lower concentration in the mixture. Because all of these components, when given alone, elicited significant responses, this reveals specific mixture processing already at the periphery. By measuring complete dose-response curves we show that these mixture effects can be fully explained by a model of syntopic interaction at a single-receptor binding site. Our data have important implications for how odor mixtures are processed in general, and what preprocessing occurs before the information reaches the brain.
Resumo:
The future of high technology welded constructions will be characterised by higher strength materials and improved weld quality with respect to fatigue resistance. The expected implementation of high quality high strength steel welds will require that more attention be given to the issues of crack initiation and mechanical mismatching. Experiments and finite element analyses were performed within the framework of continuum damage mechanics to investigate the effect of mismatching of welded joints on void nucleation and coalescence during monotonic loading. It was found that the damage of undermatched joints mainly occurred in the sandwich layer and the damageresistance of the joints decreases with the decrease of the sandwich layer width. The damage of over-matched joints mainly occurred in the base metal adjacent to the sandwich layer and the damage resistance of the joints increases with thedecrease of the sandwich layer width. The mechanisms of the initiation of the micro voids/cracks were found to be cracking of the inclusions or the embrittled second phase, and the debonding of the inclusions from the matrix. Experimental fatigue crack growth rate testing showed that the fatigue life of under-matched central crack panel specimens is longer than that of over-matched and even-matched specimens. Further investigation by the elastic-plastic finite element analysis indicated that fatigue crack closure, which originated from the inhomogeneousyielding adjacent to the crack tip, played an important role in the fatigue crack propagation. The applicability of the J integral concept to the mismatched specimens with crack extension under cyclic loading was assessed. The concept of fatigue class used by the International Institute of Welding was introduced in the parametric numerical analysis of several welded joints. The effect of weld geometry and load condition on fatigue strength of ferrite-pearlite steel joints was systematically evaluated based on linear elastic fracture mechanics. Joint types included lap joints, angle joints and butt joints. Various combinations of the tensile and bending loads were considered during the evaluation with the emphasis focused on the existence of both root and toe cracks. For a lap joint with asmall lack-of-penetration, a reasonably large weld leg and smaller flank angle were recommended for engineering practice in order to achieve higher fatigue strength. It was found that the fatigue strength of the angle joint depended strongly on the location and orientation of the preexisting crack-like welding defects, even if the joint was welded with full penetration. It is commonly believed that the double sided butt welds can have significantly higher fatigue strength than that of a single sided welds, but fatigue crack initiation and propagation can originate from the weld root if the welding procedure results in a partial penetration. It is clearly shown that the fatigue strength of the butt joint could be improved remarkably by ensuring full penetration. Nevertheless, increasing the fatigue strength of a butt joint by increasing the size of the weld is an uneconomical alternative.
Resumo:
Large Hadron Collider (LHC) is the main particle accelerator at CERN. LHC is created with main goal to search elementary particles and help science investigate our universe. Radiation in LHC is caused by charged particles circular acceleration, therefore detectors tracing particles in existed severe conditions during the experiments must be radiation tolerant. Moreover, further upgrade of luminosity (up to 1035 cm-2s-1) requires development of particle detector’s structure. This work is dedicated to show the new type 3D stripixel detector with serious structural improvement. The new type of radiation-hard detector has a three-dimensional (3D) array of the p+ and n+ electrodes that penetrate into the detector bulk. The electrons and holes are then collected at oppositely biased electrodes. Proposed 3D stripixel detector demonstrates that full depletion voltage is lower that that for planar detectors. Low depletion voltage is one of the main advantages because only depleted part of the device is active are. Because of small spacing between electrodes, charge collection distances are smaller which results in high speed of the detector’s response. In this work is also briefly discussed dual-column type detectors, meaning consisting both n+ and p+ type columnar electrodes in its structure, and was declared that dual-column detectors show better electric filed distribution then single sided radiation detectors. The dead space or in other words low electric field region in significantly suppressed. Simulations were carried out by using Atlas device simulation software. As a simulation results in this work are represented the electric field distribution under different bias voltages.
Resumo:
Large amplitude bus bar aeolian vibration may lead to post insulator damage. Different damping applications are used to decrease the risk of large amplitude aeolian vibration. In this paper the post insulator load caused by the bus bar aeolian vibration and the effect of damping methods are evaluated. The effects of three types of bus bar connectors and three types of primary structures are studied. Two actual damping devices, damping cable and their combinations are studied. The post insulator loads are studied with strain gage based custom made force sensors installed on the both ends of the post insulator and with the displacement sensor installed on the midpoint of the bus bar. The post insulator loads are calculated from the strain values and the damping properties are determined from the displacement history. The bus bar is deflected with a hanging weight. The weight is released and the bus bar is left to free damped vibration. Both actual bus bar vibration dampers RIBE and SBI were very effective against the aeolian vibration. Combining vibration damper with damping cable will increase the damping ratio but it may be unnecessary considering the extra effort. Bus bar connector type or primary structure have no effect on the vertical load. The bending moment at the post insulator with double sided bus bar connector is significantly higher than at the post insulator with single sided bus bar connector. No reliable conclusions about bus bar connector type effect can be done, but the roller bearing type or central bearing type connector may reduce the bending moment. The RHS steel frame as primary structure may increase the bending moment peak values since it is the least rigid primary structure type and it may start to vibrate as a response to the awakening force of the vibrating bus bar.
Resumo:
Volumes of interest were published between 1812 and 1815 with articles about the War of 1812. Supplement dated June 30, 1812 is a single-sided broadside titled "Supplement to the New-Hampshire Patriot". This broadside contains a complete printing of "The Manifesto", a resolution of the Committee of Foreign Relations of the United States recommending war with Britain.
Resumo:
Handwritten note (1 page, single sided) stating that Ezekiel Woodruff was born in Littlefield Ct. July 29, 1763. He married Sally Hall who was born in Middleton, Ct on May 21 [the date is listed as the 23 in the Woodruff Genealogy book], 1765. She was the daughter of Capt. Giles and A. Hall. Ezekiel Woodruff died in Niagara Falls, New York on January 7, 1836 [the 6 is crossed out and a 7 penciled in]. Sally Woodruff died in Niagara Falls, New York on Nov. 26, 1835, n.d.
Resumo:
Family record copied from the family bible. This 1 page, single sided note was in an envelope and gives date and places of births and marriage, but it doesn’t provide any last names, n.d.
Resumo:
Lors du phénomène d’hémostase primaire ou de thrombose vasculaire, les plaquettes sanguines doivent adhérer aux parois afin de remplir leur fonction réparatrice ou pathologique. Pour ce faire, certains facteurs rhéologiques et hémodynamiques tels que l’hématocrite, le taux de cisaillement local et les contraintes de cisaillement pariétal, entrent en jeu afin d’exclure les plaquettes sanguines de l’écoulement principal et de les transporter vers le site endommagé ou enflammé. Cette exclusion pourrait aussi être influencée par l’agrégation de globules rouges qui est un phénomène naturel présent dans tout le système cardiovasculaire selon les conditions d’écoulement. La dérive de ces agrégats de globules rouges vers le centre des vaisseaux provoque la formation de réseaux d’agrégats dont la taille et la complexité varient en fonction de l’hématocrite et des conditions de cisaillement présentes. Il en résulte un écoulement bi-phasique avec un écoulement central composé d’agrégats de globules rouges avoisinés par une région moins dense en particules où l’on peut trouver des globules rouges singuliers, des petits rouleaux de globules rouges et une importante concentration en plaquettes et globules blancs. De ce fait, il est raisonnable de penser que plus la taille des agrégats qui occupent le centre du vaisseau augmente, plus il y aura de plaquettes expulsées vers les parois vasculaires. L'objectif du projet est de quantifier, in vitro, la migration des plaquettes sanguines en fonction du niveau d’agrégation érythrocytaire présent, en faisant varier l’hématocrite, le taux de cisaillement et en promouvant l’agrégation par l’ajout d’agents tels que le dextran à poids moléculaire élevé. Cependant, le comportement non Newtonien du sang dans un écoulement tubulaire peut être vu comme un facteur confondant à cause de son impact sur l’organisation spatiale des agrégats de globules rouges. De ce fait, les études ont été réalisées dans un appareil permettant de moduler, de façon homogène, la taille et la structure de ces agrégats et de quantifier ainsi leur effet sur la migration axiale des plaquettes. Du sang de porc anti coagulé a été ajusté à différents taux d’hématocrite et insérer dans un appareil à écoulement de Couette, à température ambiante. Les plaquettes sanguines, difficilement isolables in vitro sans en activer certains ligands membranaires, ont été remplacées par des fantômes en polystyrène ayant un revêtement de biotine. La quantification de la migration de ces fantômes de plaquettes a été réalisée grâce à l’utilisation de membranes biologiques fixées sur les parois internes de l’entrefer du rhéomètre de Couette. Ces membranes ont un revêtement de streptavidine assurant une très forte affinité d’adhésion avec les microparticules biotynilées. À 40% d’hématocrite, à un cisaillement de 2 s-1, 566 ± 53 microparticules ont été comptées pour un protocole préétabli avec du sang non agrégeant, comparativement à 1077 ± 229 pour du sang normal et 1568 ± 131 pour du sang hyper agrégeant. Les résultats obtenus suggèrent une nette participation de l’agrégation érythrocytaire sur le transport des fantômes de plaquettes puisque l’adhésion de ces derniers à la paroi du rhéomètre de Couette augmente de façon quasi exponentielle selon le niveau d’agrégation présent.
Resumo:
La protéine Nef du VIH-1 joue un rôle important dans la pathogenèse du VIH-1 en modulant les voies de signalisation de la cellule hôte. La signalisation par le TcR est essentielle à la sélection positive pour générer les cellules simples positives (SP) CD4+ et simples positives (SP) CD8+, processus largement dépendant de l’activité de la Src kinase Lck et de son habileté à lier la queue cytoplasmique des corécepteurs CD4 et CD8. Nous avons précédemment trouvé que l’expression de Nef dans le VIH ou VIS peut induire une sévère déplétion des thymocytes et une baisse d’expression du corécepteur CD4 à la membrane. Nous avons également montré que Nef bloque la génération des thymocytes doubles positifs (DP) CD4+ CD8+ en plus d’altérer la transition des cellules DP vers CD4+ SP. Par contre, ce phénotype est récupérable par plusieurs approches dont le croisement d’une souris transgéniques exprimant Nef avec une souris exprimant la forme constitutivement active de Lck Y505F. Les résultats indiquent que la maturation des cellules CD4+ est altérée par le dysfonctionnement de la signalisation CD4-Lck. Toutefois, les mécanismes moléculaires par lesquels Nef contribue au bloc de la génération des cellules CD4+ dans le thymus demeurent très imprécis. Dans cette étude, en utilisant des approches biochimiques et de microscopie confocale, nous avons trouvé que les thymocytes transgéniques Nef+ expriment plus de Lck que les thymocytes Nef-. Malgré cette augmentation, une partie significative de Lck est incapable d’atteindre la membrane plasmique. Cette fraction était significativement accumulée dans un compartiment intracellulaire des thymocytes transgéniques exprimant Nef. Également, en utilisant la technique d’essai kinase in vitro, nous avons trouvé que l’activité kinase de Lck est significativement augmentée dans les thymocytes transgéniques mais demeure stable suite à une stimulation par un α-CD3ε + α-CD4. Également, comparativement aux thymocytes Nef-, la kinase Lck dans les thymocytes transgéniques était résistante à la dégradation suite à une stimulation. En examinant le statut de c-Cbl, le principal régulateur négatif de Lck, nous avons montré que c-Cbl colocalise faiblement avec Lck, malgré son hyperphosphorylation constitutive. Ceci pourrait expliquer l’échec de la dégradation de Lck. En plus, nous avons trouvé que suite à une stimulation par un α-CD3ε + α-CD4, la phosphorylation de Zap-70 en tyrosine 493 par Lck est diminuée, résultant d’une importante baisse de l’activité kinase de Zap-70 et d’un bloc des premiers évènements de la voie de signalisation par le TcR. Ces données indiquent que la signalisation CD4-Lck est interrompue par la présence de Nef.
Resumo:
Le système rénine-angiotensine-aldostérone (SRAA) régule l’homéostasie de la contraction des artères. Or, suivant la liaison de l’angiotensine II (Ang II) à son récepteur AT1, le SRAA est également impliqué dans l’activation de voies de signalisation à l’origine de l’inflammation et de l’hypertrophie des cellules musculaires lisses vasculaires (CMLV), soit deux processus participant au remodelage vasculaire caractéristique de diverses maladies cardiovasculaires, telles l’hypertension et l’athérosclérose. Ces pathologies sont les premières causes de mortalité naturelle en Amérique et les traitements les ciblant ne sont pas optimaux puisqu’ils visent seulement quelques facteurs de risque qui leur sont associés. Ainsi, la détermination des effecteurs intracellulaires régulant ces voies délétères est nécessaire à l'identification de nouvelles cibles thérapeutiques. L’inflammation Ang II-dépendante dans les CMLV est attribuée au facteur de transcription nuclear factor-kappa B (NF-κB). Cependant, les processus moléculaires couplant le récepteur AT1 à son activation sont peu caractérisés. L’étude abordant cette question démontre in vitro que NF-κB est activé par la protéine IκB kinase β (IKKβ) dans les CMLV exposées à l’Ang II et que cette kinase est régulée par deux voies de signalisation indépendantes, mais complémentaires afin d’assurer son activation rigoureuse et soutenue. L’une des voies est précoce et dépend des seconds messagers ainsi que de deux nouveaux effecteurs sous-jacents au récepteur AT1, soit la E3 ligase TNF receptor-associated factor 6 (TRAF6) et la IKK kinase transforming growth factor-beta-activated kinase 1 (TAK1) tandis que la seconde est tardive et résulte de la signalisation mitogen-activated protein kinase kinase 1/2 (MEK1/2) - extracellular signal-regulated kinase 1/2 (ERK1/2) - ribosomal S6 kinase (RSK). L’inhibition conjointe de ces voies abroge complètement la réponse inflammatoire, ce qui indique qu’elles en sont la seule source. Ainsi, l’inhibition d’IKKβ pourrait suffire à contrer l’inflammation impliquée dans le remodelage vasculaire associé à une suractivation du SRAA. Une découverte des plus novatrices découle de cette étude, qui veut que la E3 ligase TRAF6 est un nouvel effecteur des récepteurs couplés aux protéines G et est à l’origine de la formation d’un nouveau type de second messager, soit des chaînes libres de poly-ubiquitines. Les mécanismes moléculaires à la base de l’hypertrophie Ang II-dépendante dans les CMLV sont également peu définis. Or, suivant la parution d’un article démontrant qu’IKKβ dans les cellules cancéreuses participe aux mécanismes d’initiation de la traduction en réponse au facteur de nécrose tumorale α (TNFα) via la phosphorylation de la protéine Tuberous sclerosis 1 (TSC1) et donc l’activation du complexe mammalian target of rapamycin (mTORC1), une hypothèse a été émise selon laquelle cette kinase serait impliquée dans la synthèse protéique Ang II-dépendante dans les CMLV. Les expériences effectuées in vitro dans des CMLV exposées à l’Ang II démontrent qu’IKKβ induit la phosphorylation de TSC1 ainsi que l’activation de mTORC1 et de ses substrats S6 kinase 1 (S6K1) et translational regulators eukaryotic translation initiation factor 4E-binding protein (4E-BP1), deux protéines impliquées directement dans l’hypertrophie. Par ailleurs, la synthèse protéique au niveau des CMLV exposées à l’Ang II est réduite de 75% suivant la diminution de l’expression d’IKKβ et suivant la surexpression d’un mutant de TSC1 dont le site consensus d’IKKβ a été modifié, faisant de cette kinase un médiateur majeur au niveau de ce processus. Ainsi, in vitro IKKβ en réponse à l’Ang II est en amont de deux processus impliqués dans un remodelage vasculaire à l’origine de maladies cardiovasculaires. De plus, plusieurs facteurs de risque de ces pathologies convergent à l’activation d’IKKβ, ce qui en fait une cible thérapeutique particulièrement attrayante. Qui plus est, l’administration d’un inhibiteur d’IKKβ à des rats diminue non seulement la synthèse protéique dépendante de l’Ang II au niveau de l’aorte et des artères mésentériques, mais également la synthèse de la protéine pro-inflammatoire VCAM-1 par les cellules composant l’aorte, ce qui confirme son envergure en tant que cible.