Environmental policy and knowledge. Copying with complexity through inclusive management

Scholars agree that governance of the public environment entails cooperation between science, policy and society. This requires the active role of public managers as catalysts of knowledge co-production, addressing participatory arenas in relation to knowledge integration and social learning. This paper deals with the question of whether public managers acknowledge and take on this task. A survey accessing Directors of Environmental Offices (EOs) of 64 municipalities was carried out in parallel for two regions - Tuscany (Italy) and Porto Alegre Metropolitan Region (Brazil). The survey data were analysed using the multiple correspondence method. Results showed that, regarding policy practices, EOs do not play the role of knowledge co-production catalysts, since when making environmental decisions they only use technical knowledge. We conclude that there is a gap between theory and practice, and identify some factors that may hinder local environmental managers in acting as catalyst of knowledge co-production, raising a further question for future research.

TIR RXI collimator

A metal-less RXI collimator has been designed using the Simultaneous multiple surface method (SMS). Unlike conventional RXI collimators, whose back surface and parts of the front surface have to be metalized, this collimator is completely metal-free, made only of plastic (PMMA). The collimator’s back surface is designed as a grooved surface providing two TIR reflections for all rays impinging on it. One advantage of the design is the lower manufacturing cost, since there is no need for the expensive process of metalization. More importantly, unlike conventional RXI collimators, this design performs good colour mixing, as well as being very insensitive to the source non-uniformities. The experimental measurements of the first prototype show good agreement with the simulated design.

Analytic free-form lens design for imaging applications with high aspect ratio

A new three-dimensional analytic optics design method is presented that enables the coupling of three ray sets with only two free-form lens surfaces. Closely related to the Simultaneous Multiple Surface method in three dimensions (SMS3D), it is derived directly from Fermat?s principle, leading to multiple sets of functional differential equations. The general solution of these equations makes it possible to calculate more than 80 coefficients for each implicit surface function. Ray tracing simulations of these free-form lenses demonstrate superior imaging performance for applications with high aspect ratio, compared to conventional rotational symmetric systems.

Quasi-aplanatic free-form V-groove collimators for LED colour mixing

Two quasi-aplanatic free-form solid V-groove collimators are presented in this work. Both optical designs are originally designed using the Simultaneous Multiple Surface method in three dimensions (SMS 3D). The second optically active surface in both free-form V-groove devices is designed a posteriori as a grooved surface. First two mirror (XX) design is designed in order to clearly show the design procedure and working principle of these devices. Second, RXI free-form design is comparable with existing RXI collimators; it is a compact and highly efficient design made of polycarbonate (PC) performing very good colour mixing of the RGGB LED sources placed off-axis. There have been presented rotationally symmetric non-aplanatic high efficiency collimators with colour mixing property to be improved and rotationally symmetric aplanatic devices with good colour mixing property and efficiency to be improved. The aim of this work was to design a free-form device in order to improve colour mixing property of the rotationally symmetric nonaplanatic RXI devices and the efficiency of the aplanatic ones.

Optimización de la aplicación de lodos de depuración de aguas residuales al abonado o mejora de suelos

El objetivo de este trabajo de investigación fue evaluar el efecto de la aplicación de lodos residuales procedentes de una planta de tratamiento de aguas residuales acondicionados como biosólido para el abonado de tres cultivos agrícolas. Esto se realizó a través del estudio de las variables de producción (desarrollo vegetal de cada cultivo) y de la comparación de las características de los suelos utilizados antes y después de los ensayos experimentales. A través de la investigación se confirmó la mejora en la calidad del suelo y mejor rendimiento de cultivo debido a los biosólidos procedentes de tratamiento de aguas residuales. Este trabajo de investigación de tipo descriptivo y experimental, utilizó lodos optimizados que fueron aplicados a tres cultivos agrícolas de ciclo corto. Fueron evaluados dos cultivos (sandía y tomate) bajo riego y un cultivo (arroz) en secano. En la primera fase del trabajo se realizó la caracterización de los lodos, para ellos se realizaron pruebas físico químicas y microbiológicas. Fue utilizado el método de determinación de metales por espectrometría de emisión atómica de plasma acoplado inductivamente, (ICP-AES) para conocer las concentraciones de metales. La caracterización microbiológica para coliformes totales y fecales se realizó utilizando la técnica del Número más probable (NMP), y para la identificación de organismos patógenos se utilizó el método microbiológico propuesto por Kornacki & Johnson (2001), que se fundamenta en dos procesos: pruebas presuntivas y prueba confirmativa. Tanto los resultados para la determinación de metales y elementos potencialmente tóxicos; como las pruebas para la determinación de microorganismos potencialmente peligrosos, estuvieron por debajo de los límites considerados peligrosos establecidos por la normativa vigente en Panama (Reglamento Técnico COPANIT 47-2000). Una vez establecido la caracterización de los lodos, se evalúo el potencial de nutrientes (macro y micro) presentes en los biosólidos para su potencial de uso como abono en cultivos agrícolas. El secado de lodos fue realizado a través de una era de secado, donde los lodos fueron deshidratados hasta alcanzar una textura pastosa. “La pasta de lodo” fue transportada al área de los ensayos de campo para continuar el proceso de secado y molida. Tres ensayos experimentales fueron diseñados al azar con cinco tratamientos y cuatro repeticiones para cada uno de los tres cultivos: sandía, tomate, arroz, en parcelas de 10m2 (sandía y tomate) y 20 m2 (arroz) para cada tratamiento. Tres diferentes dosis de biosólidos fueron evaluadas y comparadas con un tratamiento de fertilizante comercial y un tratamiento control. La dosis de fertilizante comercial utilizada en cada cultivo fue la recomendada por el Instituto de Investigación Agropecuaria de Panamá. Los ensayos consideraron la caracterización inicial del suelo, la preparación del suelo, semilla, y arreglo topográfico de los cultivos siguiendo las recomendaciones agronómicas de manejo de cultivo establecida por el Instituto de Investigación Agropecuaria. Para los ensayos de sandía y tomate se instaló el sistema de riego por goteo. Se determinaron los ácidos húmicos presentes en los cultivos, y se estudiaron las variables de desarrollo de cada cultivo (fructificación, cosecha, peso de la cosecha, dimensiones de tamaño y color de las frutas, rendimiento, y la relación costo – rendimiento). También se estudiaron las variaciones de los macro y micro nutrientes y las variaciones de pH, textura de suelo y MO disponible al inicio y al final de cada uno de los ensayos de campo. Todas las variables y covariables fueron analizadas utilizando el programa estadístico INFOSAT (software para análisis estadístico de aplicación general) mediante el análisis de varianza, el método de comparaciones múltiples propuesto por Fisher (LSD Fisher) para comparar las medias de los cultivares y el coeficiente de correlación de Pearson que nos permite analizar si existe una asociación lineal entre dos variables. En la evaluación de los aportes del biosólido a los cultivos se observó que los macronutrientes N y P se encontraban de los límites requeridos en cada uno de los cultivos, pero que los niveles de K estuvieron por debajo de los requerimientos de los cultivos. A nivel de la fertilización tradicional con fertilizante químico se observó que la dosis recomendada para cada uno de los cultivos del estudio estaba sobreestimada en los tres principales macronutrientes: Nitrógeno, Fosforo y Potasio. Contenían concentraciones superiores de N, P y K a las requeridas teóricamente por el cultivo. El nutriente que se aporta en exceso es el Fósforo. Encontramos que para el cultivo de sandía era 18 veces mayor a lo requerido por el cultivo, en tomate fue 12 veces mayor y en el cultivo de arroz, 34 veces mayor. El fertilizante comercial tuvo una influencia en el peso final y rendimiento final en cada uno de los cultivos del estudio. A diferencia, los biosólidos tuvieron una influencia directa en el desarrollo de los cultivos (germinación, coloración, tamaño, longitud, diámetro, floración y resistencia a enfermedades). Para el caso de la sandía la dosis de biosólido más cercana al óptimo para el cultivo es la mayor dosis aplicada en este ensayo (97.2 gramos de biosólido por planta). En el caso de tomate, el fertilizante comercial obtuvo los mejores valores, pero las diferencias son mínimas con relación al tratamiento T1, de menor dosis de biosólido (16.2 gramos de biosólido por planta). Los resultados generales del ensayo de tomate estuvieron por debajo del rendimiento esperado para el cultivo. Los tratamientos de aplicación de biosólidos aportaron al desarrollo del cultivo en las variables tamaño, color y resistencia a las enfermedades dentro del cultivo de tomate. Al igual que el tomate, en el caso del arroz, el tratamiento comercial obtuvo los mejores resultados. Los resultados finales de peso y rendimiento del cultivo indican que el tratamiento (T2), menor dosis de biosólido (32.4 gramos por parcela), no tuvo diferencias significativas con los resultados obtenidos en las parcelas con aplicación de fertilizante comercial (T1). El tratamiento T4 (mayor dosis de biosólido) obtuvo los mejores valores para las variables germinación, ahijamiento y espigamiento del cultivo, pero al momento de la maduración obtuvo los menores resultados. Los biosólidos aportan nutrientes a los cultivos y al final del ensayo se observó que permanecen disponibles en el suelo, aportando a la mejora del suelo final. En los tres ensayos, se pudo comprobar que los aportes de los biosólidos en el desarrollo vegetativo de los cultivos. También se encontró en todos los ensayos que no hubo diferencias significativas (p > 0.05) entre los tratamientos de biosólidos y fertilizante comercial. Para obtener mejores resultados en estos tres ensayos se requeriría que a la composición de biosólidos (utilizada en este ensayo) se le adicione Potasio, Calcio y Magnesio en las cantidades requeridas por cada uno de los cultivos. ABSTRACT The objective of this investigation was to evaluate the effect of residual sewage sludge obtained from the residual water of a treatment plant conditioned as Biosolid used on three reliable agricultural crops. The effect of the added sewage sludge was evaluated through the measurement of production variables such as crop plant development and the comparison of the soil characteristics used before and after the experimental tests. This investigation confirmed that biosolids from wastewater treatment can contribute to the growth of these crops. In this experimental approach, optimized sludge was applied to three short-cycle crops including two low-risk crops (watermelon and tomato) and one high-risk crop (rice) all grown on dry land. In the first phase of work, the characteristics of the sludge were assessed using chemical, physical and microbiological tests. The concentrations of metals were determined by atomic emission spectrometry inductively coupled plasma, (ICP-AES). Microbiological characterization was performed measuring total coliform and fecal count using the most probable number technique (NMP) and microbiological pathogens were identified using Kornacki & Johnson (2001) method based on two processes: presumptive and confirmatory tests. Both the results for the determination of metals and potentially toxic elements, as testing for the determination of potentially dangerous microorganisms were below the limits established by the applicable standard in Panama (Technical Regulate COPANIT 47-2000). After the metal and bacterial characterization of the sludge, the presence of macro or micronutrients in biosolids was measured to evaluate its potential for use as fertilizer in the growth of agricultural crops. The sludge was dehydrated via a drying process into a muddy slurry. The pulp slurry was transported to the field trial area to continue the process of drying and grinding. Three randomized experimental trials were designed to test with five treatment regimens and four replications for each of the crops: watermelon, tomato, rice. The five treatment regimens evaluated were three different doses of bio solid with commercial fertilizer treatment control and no fertilizer treatment control. Treatment areas for the watermelon and tomato were 10m2 plots land and for rice was 20m2. The amount of commercial fertilizer used to treat each crop was based on the amount recommended by Agricultural Research Institute of Panama. The experimental trials considered initial characterization of soil, soil preparation, seed, and crop topographical arrangement following agronomic crop management recommendations. For the tests evaluating the growth of watermelons and tomatoes and drip irrigation system was installed. The amount of humic acids present in the culture were determined and developmental variable of each crop were studied (fruiting crop harvest weight, size dimensions and color of the fruit, performance and cost effectiveness). Changes in macro and micronutrients and changes in pH, soil texture and OM available were measured at the beginning and end of each field trial. All variables and covariates were analyzed using INFOSAT statistical program (software for statistical analysis of general application) by analysis of variance, multiple comparisons method as proposed by Fisher (LSD Fisher) to compare the means of cultivars and the Pearson ratio that allows us to analyze if there is a linear association between two variables. In evaluating the contribution of biosolids to agricultural crops, the study determined that the macronutrients N & P were within the requirements of crops, but K levels were below the requirements of crops. In terms of traditional chemical fertilizer fertilization, we observed that the recommended dose for each study crop was overestimated for the three major nutrients: nitrogen, phosphorus and potassium. Higher concentrations containing N, P and K to the theoretically required by the crop. The recommended dose of commercial fertilizer for crops study contained greater amounts of phosphorus, crops that need. The level of phosphorous was found to be18 times greater than was required for the cultivation of watermelon; 12 times higher than required for tomato, and 34 times higher than required for rice cultivation. Phosphorus inputs of commercial fertilizer were a primary influence on the weight and performance of each crop. Unlike biosolids had a direct influence on crop development (germination, color, size, length, diameter, flowering and disease resistance). In the case of growth of watermelons, the Biosolid dose closest to the optimum for cultivation was applied the highest dose in this assay (97.2 grams of bio solids per plant). In the case of tomatoes, commercial fertilizer had the best values but the differences were minimal when compared to treatment T1, the lower dose of sewage sludge (Biosolid 16.2 grams per plant). The overall results for the tomato crop yield of the trial were lower than expected. Additionally, the application of biosolids treatment contributed to the development of fruit of variable size, color and disease resistance in the tomato crops. Similar to the tomato crop, commercial fertilizer treatment provided the best results for the rice crop. The final results of weight and crop yield for rice indicated that treatment with T2 amount of biosolids (34.2 grams per plot) was not significantly different from the result obtained in the application plot given commercial fertilizer (T1). The T4 (higher dose of bio solid) treatment had the best values for the germination, tillering and bolting variables of the rice crop but for fruit ripening yielded lower results. In all three trials, biosolids demonstrated the ability to contribute in the vegetative growth of crops. It was also found in all test no significant differences (p>0.05) between treatment of bio solid and commercial fertilizer. Biosolids provided nutrients to the crops and even at the end of the trial remained available in the ground soil, contributing to the improvement of the final ground. The best results from these three trials is that the use of bio solids such as those used in this assay would require the addition of potassium, calcium and magnesium in quantities required for each crop.

Dieta e fatores de riscos metabólicos para doença cardiovascular em adultos e idosos residentes no município de São Paulo: uma análise por modelos de equações estruturais

Introdução: As doenças cardiovasculares são a principal causa de morte no Brasil e no mundo e apresentam importante contribuição para a carga global de doenças. A dieta tem sido considerada um dos determinantes primários do estado de saúde dos indivíduos, atuando na modulação dos fatores de risco metabólicos para doença cardiovascular. Objetivos: Desenvolver um modelo conceitual para a relação entre fatores de risco metabólicos e investigar sua associação com padrões de dieta de adultos e idosos residentes no município de São Paulo. Métodos: Estudo transversal de base populacional com amostra probabilística de adultos e idosos, residentes em área urbana do município de São Paulo, que participaram do Inquérito de Saúde do Município de São Paulo, realizado em duas fases entre os anos de 2008 e 2011 (estudo ISA Capital 2008). Na primeira fase do estudo, 1.102 adultos e idosos, de ambos os sexos, foram entrevistados no domicílio, por meio da aplicação de questionário estruturado e do recordatório alimentar de 24 horas. Na segunda fase, 642 indivíduos adultos e idosos foram reavaliados quanto ao consumo alimentar por meio da aplicação, por telefone, do segundo recordatório alimentar, e, destes, 592 participaram da coleta domiciliar de amostras de sangue venoso, da medição antropométrica e da aferição da pressão arterial por técnico de enfermagem. Os alimentos relatados em ambos os recordatórios foram agrupados segundo a similaridade do valor nutricional e hábitos alimentares da população, e corrigidos pela variância intrapessoal da ingestão por procedimentos estatísticos da plataforma online Multiple Source Method. Os grupos de alimentos foram analisados por meio de análise fatorial exploratória e confirmatória (manuscrito 1) e por modelos de equações estruturais exploratórios (manuscrito 3), a fim de obter os padrões de dieta. O modelo conceitual da relação entre os fatores de risco metabólicos (leptina sérica, proteína C-reativa de alta sensibilidade sérica, pressão arterial sistólica e diastólica, razão colesterol total/lipoproteína de alta densidade, razão triacilglicerol/lipoproteína de alta densidade, glicemia de jejum plasmática, circunferência da cintura e peso corporal) foi obtido por modelos de equações estruturais estratificados por sexo (manuscrito 2). Por fim, a associação dos padrões de dieta com o modelo conceitual proposto (manuscrito 3) foi investigada por modelos de equações estruturais exploratórios. Índices de qualidade de ajuste foram estimados para avaliar a adequação de todos os modelos. As análises foram realizadas no programa Mplus versão 6.12. Resultados: No manuscrito 1, a análise fatorial exploratória revelou a existência de dois padrões de dieta, os quais apresentaram boa qualidade de ajuste na análise fatorial confirmatória quando aplicados os pontos de corte de cargas fatoriais |0,25| na rotação oblíqua Promax. No manuscrito 2, a relação entre os fatores de risco metabólicos foi diferente entre os sexos. Nas mulheres, a leptina sérica apresentou efeitos indiretos e positivos, mediados pelo peso corporal e pela circunferência da cintura, em todos os fatores de risco avaliados. Já nos homens, a leptina sérica apresentou efeitos diretos e positivos sobre a proteína C-reativa de alta sensibilidade e efeitos indiretos e positivos (mediados pelo peso corporal e pela circunferência da cintura) sobre a razão triacilglicerol/lipoproteína de alta densidade, colesterol total/lipoproteína de alta densidade e glicemia de jejum plasmática. No manuscrito 3, foram obtidos três padrões de dieta, dos quais o Tradicional apresentou relação direta e negativa com a leptina sérica e relação indireta e negativa com o peso corporal e a circunferência da cintura, bem como com os demais fatores de risco metabólicos. Já o padrão Prudente apresentou relação direta e negativa com a pressão arterial sistólica, enquanto o padrão Moderno não se associou aos fatores de risco metabólicos investigados. Conclusão: Diferenças nos padrões de dieta de acordo com o tipo de rotação fatorial empregada foram observadas. A relação entre os fatores de risco metabólicos para doença cardiovascular foi distinta entre homens e mulheres, sendo a leptina um dos possíveis hormônios envolvidos. Os padrões de dieta Tradicional e Prudente associaram-se inversamente com os fatores de risco metabólicos, desempenhando uma importante estratégia de prevenção e controle às doenças cardiovasculares no país.

Phobic anxiety in 11 nations: Part I: Dimensional constancy of the five-factor model

The Fear Survey Schedule-III (FSS-III) was administered to a total of 5491 students in Australia, East Germany, Great Britain, Greece, Guatemala, Hungary, Italy, Japan, Spain, Sweden, and Venezuela, and submitted to the multiple group method of confirmatory analysis (MGM) in order to determine the cross-national dimensional constancy of the five-factor model of self-assessed fears originally established in Dutch, British, and Canadian samples. The model comprises fears of bodily injury-illness-death, agoraphobic fears, social fears, fears of sexual and aggressive scenes, and harmless animals fears. Close correspondence between the factors was demonstrated across national samples. In each country, the corresponding scales were internally consistent, were intercorrelated at magnitudes comparable to those yielded in the original samples, and yielded (in 93% of the total number of 55 comparisons) sex differences in line with the usual finding (higher scores for females). In each country, the relatively largest sex differences were obtained on harmless animals fears. The organization of self-assessed fears is sufficiently similar across nations to warrant the use of the same weight matrix (scoring key) for the FSS-III in the different countries and to make cross-national comparisons feasible. This opens the way to further studies that attempt to predict (on an a priori basis) cross-national variations in fear levels with dimensions of national cultures. (C) 2002 Elsevier Science Ltd. All rights reserved.

Typical case behaviour of spin systems in random graph and composite ensembles

This thesis includes analysis of disordered spin ensembles corresponding to Exact Cover, a multi-access channel problem, and composite models combining sparse and dense interactions. The satisfiability problem in Exact Cover is addressed using a statistical analysis of a simple branch and bound algorithm. The algorithm can be formulated in the large system limit as a branching process, for which critical properties can be analysed. Far from the critical point a set of differential equations may be used to model the process, and these are solved by numerical integration and exact bounding methods. The multi-access channel problem is formulated as an equilibrium statistical physics problem for the case of bit transmission on a channel with power control and synchronisation. A sparse code division multiple access method is considered and the optimal detection properties are examined in typical case by use of the replica method, and compared to detection performance achieved by interactive decoding methods. These codes are found to have phenomena closely resembling the well-understood dense codes. The composite model is introduced as an abstraction of canonical sparse and dense disordered spin models. The model includes couplings due to both dense and sparse topologies simultaneously. The new type of codes are shown to outperform sparse and dense codes in some regimes both in optimal performance, and in performance achieved by iterative detection methods in finite systems.

Historical global map of NH4+ and NO3- application in synthetic nitrogen fertilizer, link to NetCDF files

This paper provides a method for constructing a new historical global nitrogen fertilizer application map (0.5° × 0.5° resolution) for the period 1961-2010 based on country-specific information from Food and Agriculture Organization statistics (FAOSTAT) and various global datasets. This new map incorporates the fraction of NH+4 (and NONO-3) in N fertilizer inputs by utilizing fertilizer species information in FAOSTAT, in which species can be categorized as NH+4 and/or NO-3-forming N fertilizers. During data processing, we applied a statistical data imputation method for the missing data (19 % of national N fertilizer consumption) in FAOSTAT. The multiple imputation method enabled us to fill gaps in the time-series data using plausible values using covariates information (year, population, GDP, and crop area). After the imputation, we downscaled the national consumption data to a gridded cropland map. Also, we applied the multiple imputation method to the available chemical fertilizer species consumption, allowing for the estimation of the NH+4/NO-3 ratio in national fertilizer consumption. In this study, the synthetic N fertilizer inputs in 2000 showed a general consistency with the existing N fertilizer map (Potter et al., 2010, doi:10.1175/2009EI288.1) in relation to the ranges of N fertilizer inputs. Globally, the estimated N fertilizer inputs based on the sum of filled data increased from 15 Tg-N to 110 Tg-N during 1961-2010. On the other hand, the global NO-3 input started to decline after the late 1980s and the fraction of NO-3 in global N fertilizer decreased consistently from 35 % to 13 % over a 50-year period. NH+4 based fertilizers are dominant in most countries; however, the NH+4/NO-3 ratio in N fertilizer inputs shows clear differences temporally and geographically. This new map can be utilized as an input data to global model studies and bring new insights for the assessment of historical terrestrial N cycling changes.

QTLs mapping for primary metabolites responsible of the organoleptic and nutritional characteristics of strawberry (Fragaria x ananassa)

The cultivated strawberry (Fragaria x ananassa) is the berry fruit most consumed worldwide and is well-known for its delicate flavour and nutritional properties. However, fruit quality attributes have been lost or reduced after years of traditional breeding focusing mainly on agronomical traits. To face the obstacles encountered in the improvement of cultivated crops, new technological tools, such as genomics and high throughput metabolomics, are becoming essential for the identification of genetic factors responsible of organoleptic and nutritive traits. Integration of “omics” data will allow a better understanding of the molecular and genetic mechanisms underlying the accumulation of metabolites involved in the flavour and nutritional value of the fruit. To identify genetic components affecting/controlling? fruit metabolic composition, here we present a quantitative trait loci (QTL) analysis using a 95 F1 segregating population derived from genotypes ‘1392’, selected for its superior flavour, and ‘232’ selected based in high yield (Zorrilla-Fontanesi et al., 2011; Zorrilla-Fontanesi et al., 2012). Metabolite profiling was performed on red stage strawberry fruits using gas chromatography hyphenated to time-of-flight mass spectrometry, which is a rapid and highly sensitive approach, allowing a good coverage of the central pathways of primary metabolism. Around 50 primary metabolites, including sugars, sugars derivatives, amino and organic acids, were detected and quantified after analysis in each individual of the population. QTL mapping was performed on the ‘232’ x ‘1392’ population separately over two successive years, based on the integrated linkage map (Sánchez-Sevilla et al., 2015). First, significant associations between metabolite content and molecular markers were identified by the non-parametric test of Kruskal-Wallis. Then, interval mapping (IM), as well as the multiple QTL method (MQM) allowed the identification of QTLs in octoploid strawberry. A permutation test established LOD thresholds for each metabolite and year. A total of 132 QTLs were detected in all the linkage groups over the two years for 42 metabolites out of 50. Among them, 4 (9.8%) QTLs for sugars, 9 (25%) for acids and 7 (12.7%) for amino acids were stable and detected in the two successive years. We are now studying the QTLs regions in order to find candidate genes to explain differences in metabolite content in the different individuals of the population, and we expect to identify associations between genes and metabolites which will help us to understand their role in quality traits of strawberry fruit.

A simple method for estimating growth parameters from multiple length-frequency data in presence of continuous recruitment

The extended recruitment season for short-lived species such as prawns biases the estimation of growth parameters from length-frequency data when conventional methods are used. We propose a simple method for overcoming this bias given a time series of length-frequency data. The difficulties arising from extended recruitment are eliminated by predicting the growth of the succeeding samples and the length increments of the recruits in previous samples. This method requires that some maximum size at recruitment can be specified. The advantages of this multiple length-frequency method are: it is simple to use; it requires only three parameters; no specific distributions need to be assumed; and the actual seasonal recruitment pattern does not have to be specified. We illustrate the new method with length-frequency data on the tiger prawn Penaeus esculentus from the north-western Gulf of Carpentaria, Australia.

mulPBA: an efficient multiple protein structure alignment method based on a structural alphabet

The increasing number of available protein structures requires efficient tools for multiple structure comparison. Indeed, multiple structural alignments are essential for the analysis of function, evolution and architecture of protein structures. For this purpose, we proposed a new web server called multiple Protein Block Alignment (mulPBA). This server implements a method based on a structural alphabet to describe the backbone conformation of a protein chain in terms of dihedral angles. This sequence-like' representation enables the use of powerful sequence alignment methods for primary structure comparison, followed by an iterative refinement of the structural superposition. This approach yields alignments superior to most of the rigid-body alignment methods and highly comparable with the flexible structure comparison approaches. We implement this method in a web server designed to do multiple structure superimpositions from a set of structures given by the user. Outputs are given as both sequence alignment and superposed 3D structures visualized directly by static images generated by PyMol or through a Jmol applet allowing dynamic interaction. Multiple global quality measures are given. Relatedness between structures is indicated by a distance dendogram. Superimposed structures in PDB format can be also downloaded, and the results are quickly obtained. mulPBA server can be accessed at www.dsimb.inserm.fr/dsimb_tools/mulpba/.

Validation of a method for estimating realized annual fecundity in a multiple spawner, the long-snouted seahorse (Hippocampus guttulatus), using underwater visual census

The long-snouted seahorse (Hippocampus guttulatus) (Cuvier, 1829), was used to validate the pre-dictive accuracy of three progressively realistic models for estimating the realized annual fecundity of asyn-chronous, indeterminate, multiple spawners. Underwater surveys and catch data were used to estimate the duration of the reproductive season, female spawning frequency, male brooding frequency, and batch fecun-dity. The most realistic model, a generalization of the spawning fraction method, produced unbiased estimates of male brooding frequency (mean ±standard deviation [SD]=4.2 ±1.6 broods/year). Mean batch fecundity and realized annual fecundity were 213.9 (±110.9) and 903.6 (±522.4), respectively. However, females prepared significantly more clutches than the number of broods produced by males. Thus, methods that infer spawning frequency from patterns in female egg production may lead to significant overestimates of realized annual fecundity. The spawning fraction method is broadly applicable to many taxa that exhibit parental care and can be applied nondestructively to species for which conservation is a concern.