Production and characterization of lipid microparticles produced by spray cooling encapsulating a low molar mass hydrophilic compound

The objective of this research was to produce and characterize lipid particles (MpLs) that may be used as carriers of high amounts of hydrophilic core and evaluate the influence of the core amount on the performance of lipid microparticles. The MpLs were produced by spray cooling from solid and liquid lipid mixtures (stearic and oleic fatty acids and partly hydrogenated vegetable fat) containing glucose solution as core and soy lecithin as surfactant. The performance of MpLs was evaluated by means of the effective amount of encapsulated core, the core amount present on the surface of MpLs (superficial glucose) and the core release profile in aqueous solution. Morphological observations showed that MpLs presented spherical shape and a rugged and continuous surface, and an average diameter between 25 and 32 µm. The effective amount of encapsulated core was greater than 78% for all formulations evaluated. Larger amounts of superficial glucose were found in formulations in which more concentrated glucose solutions were used, regardless of the glucose lipid-solution ratio. The release results showed that core retention was significantly influenced by the glucose solution concentration, whereas release modulation was influenced by the glucose lipid-solution ratio.

Regeneración ósea guiada en distal del segundo molar inmediata a la cirugía del tercer molar

Tesis (Maestría en Ciencias Odontológicas con especialidad en Periodoncia ) U.A.N.L.

Tratamiento ortodontico para la corrección de la clase II molar con el uso de la barra palatina T unido a un miniimplante.

Tesis (Maestría en Ciencias Odontológicas con orientación en Ortodoncia) UANL, 2014.

Un proyecto Grundtvig en el centro comarcal EPA El Molar.

Presenta un proyecto de innovación desarrollado por el Centro Comarcal de EPA 'El Mola' dentro de los programas de acción Grundtvig. A este programa están adscritos Bélgica, Reino Unido, Lituania, Hungría, Suiza y España y la finalidad es estudiar líneas de actuación para progresar en la promoción de la participación de las comunidades educativas en sus centros respectivos. Se centra en el proceso seguido en el CEPA del El Molar en la coordinación, el desarrollo de las actividades y el producto final de la experiencia.

Shear controlled crystal size definition in a low molar mass compound using a polymeric solvent

We show that close to monodisperse crystalline fibrils of dibenzylidene sorbitol can be obtained by preparation in a polymeric solvent subjected to extended shear flow.

Effects of Cobalt Chloride in Junctional Epithelium and Reduced Enamel Epithelium of the Rat Maxillary First Molar

Cobalt is one of the main components of cast metal alloys broadly used in dentistry. It is the constituent of 45 to 70% of numerous prosthetic works. There are evidences that metal elements cause systemic and local toxicity. The purpose of the present study was to evaluate the effects of cobalt on the junctional epithelium and reduced enamel epithelium of the first superior molar in rats, during lactation. To do this, 1-day old rats were used, whose mothers received 300mg of cobalt chloride per liter of distilled water in the drinker, during lactation. After 21 days, the rat pups were killed with an anesthetic overdose. The heads were separated, fixed in ""alfac"", decalcified and embedded in paraffin. Frontal sections stained with hematoxylin and eosin were employed. Karyometric methods allowed to estimate the following parameters: biggest, smallest and mean diameters, D/d ratio, perimeter, area, volume, volume/area ratio, eccentricity, form coefficient and contour index. Stereologic methods allow to evaluate: cytoplasm/nucleus ratio, cell and cytoplasm volume, cell number density, external surface/basal membrane ratio, thickness of the epithelial layers and surface density. All the collected data were subjected to statistic analysis by the non-parametric Wilcoxon-Mann-Whitney test. The nuclei of the studied tissues showed smaller values after karyometry for: diameters; perimeter, area, volume and volume/area ratio. Stereologically, it was observed, in the junctional epithelium and in the reduced enamel epithelium, smaller cells with scarce cytoplasm, reflected in the greater number of cells per mm3 of tissue. In this study, cobalt caused epithelial atrophy, indicating a direct action on the junctional and enamel epithelium.

Blendas de polietileno de ultra alto peso molar (PEUAPM) com polietileno linear de média densidade (PELMD) para rotomoldagem

Neste trabalho foi feito um estudo das propriedades reológicas, mecânicas e térmicas de blendas poliméricas contendo 1 e 10% em massa de polietileno de ultra alto peso molar (PEUAPM) e polietileno linear de média densidade (PELMD). As blendas foram obtidas por mistura em extrusora de rosca simples e em extrusora de rosca dupla, para fins de comparação. Na extrusão em rosca dupla foi acrescentado um terceiro componente - óleo mineral, cera ou polietileno de muito baixo peso Molar (PEMBPM) - a fim de promover uma melhor interação entre o PELMD e PEUAPM. As amostras obtidas por moldagem por injeção, rotomoldagem e moldagem por compressão foram submetidas a testes reológicos, térmicos e mecânicos. Foi analisada a influência do tipo de processamento e da composição das blendas sobre morfologia e as propriedades finais destas. A reometria rotacional indicou um gradual aumento da viscosidade das blendas com o aumento da quantidade de PEUAPM adicionado. Análises de microscopia eletrônica de varredura (MEV), microscopia ótica e calorimetria diferencial de varredura (DSC) indicaram uma separação de fases nas blendas, mesmo quando o terceiro componente foi adicionado. Entretanto, as blendas que contém agente de acoplamento apresentaram diferenças na morfologia final, como observado através das análises de microscopia ótica durante a cristalização do sistema polimérico e nas análises de MEV nas amostras moldadas por injeção Para todas as blendas moldadas por injeção, a resistência ao impacto foi menor do que a encontrada para o PELMD puro. Por outro lado, nas amostras rotomoldadas não houve diferença significativa nas propriedades das blendas quando comparadas ao PELMD puro. As amostras extrusadas em rosca dupla, contendo óleo mineral ou cera e, posteriormente, moldadas por compressão apresentaram resistência ao impacto similares aos valores encontrados para o PELMD puro, sem significativas mudanças na processabilidade. Considerando as demais análises de propriedades mecânicas, não foi observada influência do terceiro componente.

Influência da densidade de carga e da massa molar da poliacrilamida na reologia de sistemas microemulsionados

The knowledge of the rheological behavior of microemulsionated systems (SME) is of fundamental importance due to the diversity of industrial applications of these systems. This dissertation presents the rheological behavior of the microemulsionated system formed by RNX 95/alcohol isopropyl/p-toulen sodium sulfonate/kerosene/distilled water with the addition of polyacrylamide polymer. It was chosen three polymers of the polyacrylamide type, which differ in molar weight and charge density. It was studied the addition of these polymers in relatively small concentration 0,1% in mass and maximum concentration of 2,0%. It was made analysis of flow to determine the appearing viscosities of the SME and rheological parameters applying Bingham, Ostwald de Waale and Herschell-Buckley models. The behavior into saline environment of this system was studied for a solution of KCl 2,0%, replacing the distilled water. It was determined the behavior of microemulsions in relation with the temperature through curves of flow in temperatures of 25 to 60ºC in variations of 5ºC. After the analysis of the results the microemulsion without the addition of polymer presented a slight increase in its viscosity, but it does not mischaracterize it as a Newtonian fluid. However the additive systems when analyzed with low concentration of polymer adjusted well to the applied models, with a very close behavior of microemulsion. The higher concentration of the polymer gave the systems a behavior of plastic fluid. The results of the temperature variation point to an increase of viscosity in the systems that can be related to structural changes in the micelles formed in the own microemulsion without the addition of polymer

A curva de regressão da gonadotrofina coriônica humana é útil no diagnóstico precoce da neoplasia trofoblástica gestacional pós-molar?

OBJETIVO: avaliar a utilidade da curva de regressão normal da gonadotrofina coriônica humana (hCG) no diagnóstico precoce de neoplasia trofoblástica gestacional pós-molar (NTG). MÉTODOS: estudo longitudinal, incluindo 105 pacientes com mola hidatiforme completa (MHC) acompanhadas no Centro de Doenças Trofoblásticas de Botucatu, entre 1998 e 2005. Os títulos da hCG sérica foram mensurados quinzenalmente em todas as pacientes. Curvas individuais de regressão da hCG das 105 pacientes foram estabelecidas. A comparação entre a curva de regressão normal estabelecida em nosso serviço com as curvas individuais da hCG foi usada no rastreamento e diagnóstico (platô/ascensão) de NTG. O número de semanas pós-esvaziamento quando a hCG excedeu o limite normal foi comparado com o número semanas em que a hCG apresentou platô/ascensão. RESULTADOS: das 105 pacientes com MHC, 80 apresentaram remissão espontânea (RE) e 25 desenvolveram NTG. Das 80 pacientes com RE, 7 (8,7%) apresentaram, inicialmente, dosagem da hCG acima do normal, mas, no devido tempo, alcançaram a remissão. Todas as 25 pacientes com NTG apresentaram desvio da curva normal da hCG em 3,8±2,5 semanas e mostraram platô ou ascensão em 8,4±2,9 semanas (p<0,001). CONCLUSÕES: a curva de regressão normal da hCG pós-molar pode ser útil para diagnóstico de NTG.

Molar Pregnancy in Adolescents

OBJECTIVE: To describe the clinical presentation of hydatidiform molar pregnancy in women under the age of 20 years. In addition, we sought to understand if this adolescent population manifests differences in clinical factors compared to an adult population that may affect outcome.STUDY DESIGN: We used a database from the New England Trophoblastic Disease Center to analyze clinical data from all women followed for molar pregnancy between 1970 and 2009 with complete follow-up information. This population was stratified by age and clinical parameters including presenting signs, molar histology and development of gestational trophoblastic neoplasia (GTN). Univariable and multivariable logistic regression was employed to discern clinical factors that associated with adolescent age. The Partners Human Research Committee approved this study.RESULTS: We identified 1,494 women diagnosed with hydatidiform mole (HM), of which 220 (14.7%) were adolescents defined as age <20 years. The most common presenting clinical signs were vaginal bleeding and an enlarged uterus compared to dates. Median gestational age at diagnosis was 13.4 weeks, not different from that in the adult population. Similarly, no difference in presenting human chorionic gonadotropin was observed between the adult and adolescent populations. Adolescents presented with a significant overrepresentation of complete mole (86% vs. 75%, p < 0.001) compared to adults. Complete mole was associated with a heightened risk of developing GTN (OR 2.6, 95% CI 1.9-3.5), and despite the association of complete mole with young maternal age, univariable analysis showed no difference in the rate of GTN observed between adolescents and adults (24% vs. 30%, p = 0.08). Multivariable analysis controlling for molar histology demonstrated that adolescent age was associated with a decreased risk of GTN (hazard ratio 0.67, 95% CI 0.48 0.93).CONCLUSION: Adolescents account for a substantial proportion of the population with HM. They commonly present with vaginal bleeding. Though this population develops a complete mole with a higher frequency than adults, adolescents appear to have a significantly decreased risk of developing GTN. (J Reprod Med 2012; 57:225-230)