Utilização de metaheurísticas combinada a diferentes métodos de aglutinação para a otimização de um processo de torneamento com múltiplas respostas

Pós-graduação em Engenharia Mecânica - FEG

Nonlinear ball and beam control system identification

The Ball and Beam system is a common didactical experiment in control laboratories that can be used to illustrate many different closed-loop control techniques. The plant itself is subjected to many nonlinear effects, which the most common comes from the relative motion between the ball and the beam. The modeling process normally uses the lagrangean formulation. However, many other nonlinear effects, such as non-viscous friction, beam flexibility, ball slip, actuator elasticity, collisions at the end of the beam, to name a few, are present. Besides that, the system is naturally unstable. In this work, we analyze a subset of these characteristics, in which the ball rolls with slipping and the friction force between the ball and the beam is non-viscous (Coulomb friction). Also, we consider collisions at the ends of the beam, the actuator consists of a (rubber made) belt attached at the free ends of the beam and connected to a DC motor. The model becomes, with those nonlinearities, a differential inclusion system. The elastic coefficients of the belt are experimentally identified, as well as the collision coefficients. The nonlinear behavior of the system is studied and a control strategy is proposed.

Avaliação do software Autodesk Revit 2016 para quantificação por meio da modelagem da informação da construção

The building budgeting quickly and accurately is a challenge faced by the companies in the sector. The cost estimation process is performed from the quantity takeoff and this process of quantification, historically, through the analysis of the project, scope of work and project information contained in 2D design, text files and spreadsheets. This method, in many cases, present itself flawed, influencing the making management decisions, once it is closely coupled to time and cost management. In this scenario, this work intends to make a critical analysis of conventional process of quantity takeoff, from the quantification through 2D designs, and with the use of the software Autodesk Revit 2016, which uses the concepts of building information modeling for automated quantity takeoff of 3D model construction. It is noted that the 3D modeling process should be aligned with the goals of budgeting. The use of BIM technology programs provides several benefits compared to traditional quantity takeoff process, representing gains in productivity, transparency and assertiveness

Avaliação do software Autodesk Revit 2016 para quantificação por meio da modelagem da informação da construção

The building budgeting quickly and accurately is a challenge faced by the companies in the sector. The cost estimation process is performed from the quantity takeoff and this process of quantification, historically, through the analysis of the project, scope of work and project information contained in 2D design, text files and spreadsheets. This method, in many cases, present itself flawed, influencing the making management decisions, once it is closely coupled to time and cost management. In this scenario, this work intends to make a critical analysis of conventional process of quantity takeoff, from the quantification through 2D designs, and with the use of the software Autodesk Revit 2016, which uses the concepts of building information modeling for automated quantity takeoff of 3D model construction. It is noted that the 3D modeling process should be aligned with the goals of budgeting. The use of BIM technology programs provides several benefits compared to traditional quantity takeoff process, representing gains in productivity, transparency and assertiveness

Die Kristallstruktur zweier Atmungsproteine: das Hämoglobin des Meerschweinchens und das 24-mere Hämocyanin des Kaiserskorpions

Im Verlauf der vorgestellten Arbeit konnten die Kristallstrukturen zweier Atmungsproteine gelöst werden. Da diese Strukturen mit verschiedenen Auflösungen gelöst wurden, wurden für die beiden Modelle unterschiedliche Methoden verwendet.rnrnDie Kristalle des Hämoglobins des Meerschweinchens Cavia porcellus erlaubten eine Messung von Streureflexen bis zu einer Auflösung von 1.7 Ǻ. Damit konnten das Molecular Replacement und das folgende Refinement mit geringen Vorgaben durchgeführt werden.rnAnhand der ermittelten Struktur konnte gezeigt werden, dass die Höhenadaptation des Hämoglobins des Meerschweinchens auf einer Stabilisierung des R2-Zustandes und einer gleichzeitigen Destabilisierung des T-Zustandes beruht. Die zu Grunde liegenden Aminosäureaustausche konnten identifiziert und der resultierende Mechanismus postuliert werden. Die Durchführung von Mutagenese-Experimenten am Hämoglobin des Meerschweinchens könnte die vorgestellte Hypothese bestätigen.rnrnDie Kristallstruktur des 24-meren Hämocyanins aus Pandinus imperator konnte durch eine Kombination von Röntgenkristallographie und Homologiemodellierung mit einer Auflösung von 6.5 Ǻ gelöst werden. Allerdings wäre die Bestimmung der Phasen durch Molecular Replacement ohne die vor kurzem publizierte Kryo-EM Struktur nicht möglich gewesen [Cong et al., 2009].rnDamit ist es durch die Kombination verschiedener Methoden erstmalig gelungen die Struktur eines Hämocyanins dieser Größe (Mw = 1.7 MDa) zu lösen. Die Auflösung von 6.5 Ǻ, eine für die Kristallographie relativ geringe Auflösung, erlaubte die Bestimmung des Cα-Traces des Proteins mit hoher Genauigkeit.rnDurch die Kristallstruktur konnte das zu Grunde liegende Kryo-EM Modell aus [Cong et al., 2009] bestätigt werden. Insbesondere die Position der α-Helices konnte mittels Kristallographie mit einer höheren Genauigkeit bestimmt werden. Durch die Verwendung von OMIT-Maps wurde sichergestellt, dass die Struktur nicht "kopiert" wurde. Die Übereinstimmung ist deshalb auf die Struktur des Hämocyanins im gemessenen Kristall zurückzuführen, nicht auf einen Bias bei der Auswertung.rnAnhand der Kristallstruktur konnten für die Kooperativität im Trimer potentiell entscheidende Aminosäuren identifiziert werden. Diese Aminosäuren könnten im Vergleich zur bekannten trimeren Struktur aus Limulus polyphemus zur Ausbildung zusätzlicher Bindungen zwischen den Untereinheiten führen. Diese Bindungen könnten eine wichtige Rolle beim Konformationsübergang zwischen dem T- und R-Zustand spielen.rn

Simple beam models for Monte Carlo photon beam dose calculations in radiotherapy

Monte Carlo (code GEANT) produced 6 and 15 MV phase space (PS) data were used to define several simple photon beam models. For creating the PS data the energy of starting electrons hitting the target was tuned to get correct depth dose data compared to measurements. The modeling process used the full PS information within the geometrical boundaries of the beam including all scattered radiation of the accelerator head. Scattered radiation outside the boundaries was neglected. Photons and electrons were assumed to be radiated from point sources. Four different models were investigated which involved different ways to determine the energies and locations of beam particles in the output plane. Depth dose curves, profiles, and relative output factors were calculated with these models for six field sizes from 5x5 to 40x40cm2 and compared to measurements. Model 1 uses a photon energy spectrum independent of location in the PS plane and a constant photon fluence in this plane. Model 2 takes into account the spatial particle fluence distribution in the PS plane. A constant fluence is used again in model 3, but the photon energy spectrum depends upon the off axis position. Model 4, finally uses the spatial particle fluence distribution and off axis dependent photon energy spectra in the PS plane. Depth dose curves and profiles for field sizes up to 10x10cm2 were not model sensitive. Good agreement between measured and calculated depth dose curves and profiles for all field sizes was reached for model 4. However, increasing deviations were found for increasing field sizes for models 1-3. Large deviations resulted for the profiles of models 2 and 3. This is due to the fact that these models overestimate and underestimate the energy fluence at large off axis distances. Relative output factors consistent with measurements resulted only for model 4.

Interdisciplinary assessment of complex regional water systems and their future evolution: how socioeconomic drivers can matter more than climate

Modeling of future water systems at the regional scale is a difficult task due to the complexity of current structures (multiple competing water uses, multiple actors, formal and informal rules) both temporally and spatially. Representing this complexity in the modeling process is a challenge that can be addressed by an interdisciplinary and holistic approach. The assessment of the water system of the Crans-Montana-Sierre area (Switzerland) and its evolution until 2050 were tackled by combining glaciological, hydrogeological, and hydrological measurements and modeling with the evaluation of water use through documentary, statistical and interview-based analyses. Four visions of future regional development were co-produced with a group of stakeholders and were then used as a basis for estimating future water demand. The comparison of the available water resource and the water demand at monthly time scale allowed us to conclude that for the four scenarios socioeconomic factors will impact on the future water systems more than climatic factors. An analysis of the sustainability of the current and future water systems based on four visions of regional development allowed us to identify those scenarios that will be more sustainable and that should be adopted by the decision-makers. The results were then presented to the stakeholders through five key messages. The challenges of communicating the results in such a way with stakeholders are discussed at the end of the article.

BAYESIAN STATISTICAL METHODS IN GENE-ENVIRONMENT AND GENE-GENE INTERACTION STUDIES

Complex diseases such as cancer result from multiple genetic changes and environmental exposures. Due to the rapid development of genotyping and sequencing technologies, we are now able to more accurately assess causal effects of many genetic and environmental factors. Genome-wide association studies have been able to localize many causal genetic variants predisposing to certain diseases. However, these studies only explain a small portion of variations in the heritability of diseases. More advanced statistical models are urgently needed to identify and characterize some additional genetic and environmental factors and their interactions, which will enable us to better understand the causes of complex diseases. In the past decade, thanks to the increasing computational capabilities and novel statistical developments, Bayesian methods have been widely applied in the genetics/genomics researches and demonstrating superiority over some regular approaches in certain research areas. Gene-environment and gene-gene interaction studies are among the areas where Bayesian methods may fully exert its functionalities and advantages. This dissertation focuses on developing new Bayesian statistical methods for data analysis with complex gene-environment and gene-gene interactions, as well as extending some existing methods for gene-environment interactions to other related areas. It includes three sections: (1) Deriving the Bayesian variable selection framework for the hierarchical gene-environment and gene-gene interactions; (2) Developing the Bayesian Natural and Orthogonal Interaction (NOIA) models for gene-environment interactions; and (3) extending the applications of two Bayesian statistical methods which were developed for gene-environment interaction studies, to other related types of studies such as adaptive borrowing historical data. We propose a Bayesian hierarchical mixture model framework that allows us to investigate the genetic and environmental effects, gene by gene interactions (epistasis) and gene by environment interactions in the same model. It is well known that, in many practical situations, there exists a natural hierarchical structure between the main effects and interactions in the linear model. Here we propose a model that incorporates this hierarchical structure into the Bayesian mixture model, such that the irrelevant interaction effects can be removed more efficiently, resulting in more robust, parsimonious and powerful models. We evaluate both of the 'strong hierarchical' and 'weak hierarchical' models, which specify that both or one of the main effects between interacting factors must be present for the interactions to be included in the model. The extensive simulation results show that the proposed strong and weak hierarchical mixture models control the proportion of false positive discoveries and yield a powerful approach to identify the predisposing main effects and interactions in the studies with complex gene-environment and gene-gene interactions. We also compare these two models with the 'independent' model that does not impose this hierarchical constraint and observe their superior performances in most of the considered situations. The proposed models are implemented in the real data analysis of gene and environment interactions in the cases of lung cancer and cutaneous melanoma case-control studies. The Bayesian statistical models enjoy the properties of being allowed to incorporate useful prior information in the modeling process. Moreover, the Bayesian mixture model outperforms the multivariate logistic model in terms of the performances on the parameter estimation and variable selection in most cases. Our proposed models hold the hierarchical constraints, that further improve the Bayesian mixture model by reducing the proportion of false positive findings among the identified interactions and successfully identifying the reported associations. This is practically appealing for the study of investigating the causal factors from a moderate number of candidate genetic and environmental factors along with a relatively large number of interactions. The natural and orthogonal interaction (NOIA) models of genetic effects have previously been developed to provide an analysis framework, by which the estimates of effects for a quantitative trait are statistically orthogonal regardless of the existence of Hardy-Weinberg Equilibrium (HWE) within loci. Ma et al. (2012) recently developed a NOIA model for the gene-environment interaction studies and have shown the advantages of using the model for detecting the true main effects and interactions, compared with the usual functional model. In this project, we propose a novel Bayesian statistical model that combines the Bayesian hierarchical mixture model with the NOIA statistical model and the usual functional model. The proposed Bayesian NOIA model demonstrates more power at detecting the non-null effects with higher marginal posterior probabilities. Also, we review two Bayesian statistical models (Bayesian empirical shrinkage-type estimator and Bayesian model averaging), which were developed for the gene-environment interaction studies. Inspired by these Bayesian models, we develop two novel statistical methods that are able to handle the related problems such as borrowing data from historical studies. The proposed methods are analogous to the methods for the gene-environment interactions on behalf of the success on balancing the statistical efficiency and bias in a unified model. By extensive simulation studies, we compare the operating characteristics of the proposed models with the existing models including the hierarchical meta-analysis model. The results show that the proposed approaches adaptively borrow the historical data in a data-driven way. These novel models may have a broad range of statistical applications in both of genetic/genomic and clinical studies.

A method to obtain the thermal parameters and the photothermal transduction efficiency in an optical hyperthermia device based on laser irradiation of gold nanoparticles

Optical hyperthermia systems based on the laser irradiation of gold nanorods seem to be a promising tool in the development of therapies against cancer. After a proof of concept in which the authors demonstrated the efficiency of this kind of systems, a modeling process based on an equivalent thermal-electric circuit has been carried out to determine the thermal parameters of the system and an energy balance obtained from the time-dependent heating and cooling temperature curves of the irradiated samples in order to obtain the photothermal transduction efficiency. By knowing this parameter, it is possible to increase the effectiveness of the treatments, thanks to the possibility of predicting the response of the device depending on the working configuration. As an example, the thermal behavior of two different kinds of nanoparticles is compared. The results show that, under identical conditions, the use of PEGylated gold nanorods allows for a more efficient heating compared with bare nanorods, and therefore, it results in a more effective therapy.

Métodos numéricos y estadísticos de caracterización de uniones tubulares soldadas para su aplicación en modelos de elementos finitos de estructuras de vehículos

El análisis de estructuras mediante modelos de elementos finitos representa una de las metodologías más utilizadas y aceptadas en la industria moderna. Para el análisis de estructuras tubulares de grandes dimensiones similares a las sobrestructuras de autobuses y autocares, los elementos de tipo viga son comúnmente utilizados y recomendados debido a que permiten obtener resultados satisfactorios con recursos computacionales reducidos. No obstante, los elementos de tipo viga presentan importante desventaja ya que las uniones modeladas presentan un comportamiento infinitamente rígido, esto determina un comportamiento mas rígido en las estructuras modeladas lo que se traduce en fuentes de error para las simulaciones estructurales (hasta un 60%). Mediante el modelado de uniones tubulares utilizando elementos de tipo área o volumen, se pueden obtener modelos más realistas, ya que las características topológicas de la unión propiamente dicha pueden ser reproducidas con un mayor nivel de detalle. Evitándose de esta manera los inconvenientes de los elementos de tipo viga. A pesar de esto, la modelización de estructuras tubulares de grandes dimensiones con elementos de tipo área o volumen representa una alternativa poco atractiva debido a la complejidad del proceso de modelados y al gran número de elementos resultantes lo que implica la necesidad de grandes recursos computacionales. El principal objetivo del trabajo de investigación presentado, fue el de obtener un nuevo tipo de elemento capaz de proporcionar estimaciones más exactas en el comportamiento de las uniones modeladas, al mismo tiempo manteniendo la simplicidad del procesos de modelado propio de los elementos de tipo viga regular. Con el fin de alcanzar los objetivos planteados, fueron realizadas diferentes metodologías e investigaciones. En base a las investigaciones realizadas, se obtuvo un modelo de unión viga alternativa en el cual se introdujeron un total seis elementos elásticos al nivel de la unión mediante los cuales es posible adaptar el comportamiento local de la misma. Adicionalmente, para la estimación de las rigideces correspondientes a los elementos elásticos se desarrollaron dos metodologías, una primera basada en la caracterización del comportamiento estático de uniones simples y una segunda basada en la caracterización del comportamiento dinámico a través de análisis modales. Las mejoras obtenidas mediante la implementación del modelo de unión alternativa fueron analizadas mediante simulaciones y validación experimental en una estructura tubular compleja representativa de sobrestructuras de autobuses y autocares. En base a los análisis comparativos realizados con la uniones simples modeladas y los experimentos de validación, se determinó que las uniones modeladas con elementos de tipo viga son entre un 5-60% más rígidas que uniones equivalentes modeladas con elementos área o volumen. También se determinó que las uniones área y volumen modeladas son entre un 5 a un 10% mas rígidas en comparación a uniones reales fabricadas. En los análisis realizados en la estructura tubular compleja, se obtuvieron mejoras importantes mediante la implementación del modelo de unión alternativa, las estimaciones del modelo viga se mejoraron desde un 49% hasta aproximadamente un 14%. ABSTRACT The analysis of structures with finite elements models represents one of the most utilized an accepted technique in the modern industry. For the analysis of large tubular structures similar to buses and coaches upper structures, beam type elements are utilized and recommended due to the fact that these elements provide satisfactory results at relatively reduced computational performances. However, the beam type elements have a main disadvantage determined by the fact that the modeled joints have an infinite rigid behavior, this shortcoming determines a stiffer behavior of the modeled structures which translates into error sources for the structural simulations (up to 60%). By modeling tubular junctions with shell and volume elements, more realistic models can be obtained, because the topological characteristics of the junction at the joint level can be reproduced more accurately. This way, the shortcoming that the beam type elements present can be solved. Despite this fact, modeling large tubular structures with shell or volume type elements represents an unattractive alternative due to the complexity of the modeling process and the large number of elements that result which imply the necessity of vast computational performances. The main objective of the research presented in this thesis was to develop a new beam type element that would be able to provide more accurate estimations for the local behavior of the modeled junctions at the same time maintaining the simplicity of the modeling process the regular beam type elements have. In order to reach the established objectives of the research activities, a series of different methodologies and investigations have been necessary. From these investigations an alternative beam T-junction model was obtained, in which a total of six elastic elements at the joint level were introduced, the elastic elements allowed us to adapt the local behavior of the modeled junctions. Additionally, for the estimation of the stiffness values corresponding to the elastic elements two methodologies were developed, one based on the T-junction’s static behavior and a second one based on the T-junction’s dynamic behavior by means of modal analysis. The improvements achieved throughout the implementation of this alternative T-junction model were analyzed though mechanical validation in a complex tubular structures that had a representative configuration for buses and coaches upper structures. From the comparative analyses of the finite element modeled T-junctions and mechanical experimental analysis, was determined that the beam type modeled T-junctions have a stiffer behavior compared to equivalent shell and volume modeled T-junctions with average differences ranging from 5-60% based on the profile configurations. It was also determined that the shell and volume models have a stiffer behavior compared to real T-junctions varying from 5 to 10% depending on the profile configurations. Based on the analysis of the complex tubular structure, significant improvements were obtained by the implementation of the alternative beam T-junction model, the model estimations were improved from a 49% to approximately 14%.

Desarrollo de un proceso de razonamiento visual para la valoración del patrimonio

El tema de la presente tesis es la valoración del patrimonio y en ella se considera que el patrimonio es un proceso cultural interesado en negociar, crear y recrear recuerdos, valores y significados culturales. Actualmente el patrimonio como proceso se está consolidando en la literatura científica, aunque la idea de que es una ‘cosa’ es dominante en el debate internacional y está respaldada tanto por políticas como prácticas de la UNESCO. El considerar el patrimonio como un proceso permite una mirada crítica, que subraya la significación. Es decir, supone el correlato que conlleva definir algo como ‘patrimonio’, o hacer que lo vaya siendo. Esta visión del concepto permite la posibilidad de comprender no sólo lo que se ha valorado, sino también lo que se ha olvidado y el porqué. El principal objetivo de esta investigación es explorar las características de un proceso de razonamiento visual para aplicarlo en el de valoración del patrimonio. Éste que se presenta, implica la creación de representaciones visuales y sus relaciones, además su meta no está centrada en producir un ambiente que sea indiferenciado de la realidad física. Con él se pretende ofrecer la posibilidad de comunicar la dimensión ‘poliédrica’ del patrimonio. Para que este nuevo proceso que propongo sea viable y sostenible, existe la necesidad de tener en cuenta el fin que se quiere lograr: la valoración. Es importante considerar que es un proceso en el cual las dinámicas de aprendizaje, comportamientos y exploración del patrimonio están directamente relacionadas con su valoración. Por lo tanto, hay que saber cómo se genera la valoración del patrimonio, con el fin de ser capaces de desarrollar el proceso adaptado a estas dinámicas. La hipótesis de esta tesis defiende que un proceso de razonamiento visual para la valoración del patrimonio permite que las personas involucradas en el proceso inicien un proceso de interacción con un elemento patrimonial y su imagen mental para llegar a ciertas conclusiones con respecto a su valor y significado. El trabajo describe la metodología que da lugar al proceso de razonamiento visual para el patrimonio, que ha sido concebido sobre un modelado descriptivo de procesos, donde se han caracterizado tres niveles: meta-nivel, de análisis y operacional. En el modelado del proceso los agentes, junto con el patrimonio, son los protagonistas. El enfoque propuesto no es sólo sobre el patrimonio, sino sobre la compleja relación entre las personas y el patrimonio. Los agentes humanos dan valor a los testimonios de la vida pasada y les imbuyen de significado. Por lo tanto, este enfoque de un proceso de razonamiento visual sirve para detectar los cambios en el valor del patrimonio, además de su dimensión poliédrica en términos espaciales y temporales. Además se ha propuesto una nueva tipología de patrimonio necesaria para sustentar un proceso de razonamiento visual para su valoración. Esta tipología está apoyada en la usabilidad del patrimonio y dentro de ella se encuentran los siguientes tipos de patrimonio: accesible, cautivo, contextualizado, descontextualizado, original y vicarial. El desarrollo de un proceso de razonamiento visual para el patrimonio es una propuesta innovadora porque integra el proceso para su valoración, contemplando la dimensión poliédrica del patrimonio y explotando la potencialidad del razonamiento visual. Además, los posibles usuarios del proceso propuesto van a tener interacción de manera directa con el patrimonio e indirecta con la información relativa a él, como por ejemplo, con los metadatos. Por tanto, el proceso propuesto posibilita que los posibles usuarios se impliquen activamente en la propia valoración del patrimonio. ABSTRACT The subject of this thesis is heritage valuation and it argues that heritage is a cultural process that is inherited, transmitted, and transformed by individuals who are interested in negotiating, creating and recreating memories and cultural meanings. Recently heritage as a process has seen a consolidation in the research, although the idea that heritage is a ‘thing’ is dominant in the international debate and is supported by policies and practice of UNESCO. Seeing heritage as a process enables a critical view, underscoring the significance. That is, it is the correlate involved in defining something as ‘heritage’, or converting it into heritage. This view of the concept allows the possibility to understand not only what has been valued, but also what has been forgotten and why. The main objective of this research is to explore the characteristics of a visual reasoning process in order to apply it to a heritage valuation. The goal of the process is not centered on producing an environment that is undifferentiated from physical reality. Thus, the objective of the process is to provide the ability to communicate the ‘polyhedral’ dimension of heritage. For this new process to be viable and sustainable, it is necessary to consider what is to be achieved: heritage valuation. It is important to note that it is a process in which the dynamics of learning, behavior and exploration heritage are directly related to its valuation. Therefore, we need to know how this valuation takes place in order to be able to develop a process that is adapted to these dynamic. The hypothesis of this thesis argues that a visual reasoning process for heritage valuation allows people involved in the process to initiate an interaction with a heritage and to build its mental image to reach certain conclusions regarding its value and meaning. The thesis describes the methodology that results in a visual reasoning process for heritage valuation, which has been based on a descriptive modeling process and have characterized three levels: meta, analysis and operational -level. The agents are the protagonists in the process, along with heritage. The proposed approach is not only about heritage but the complex relationship between people and heritage. Human operators give value to the testimonies of past life and imbue them with meaning. Therefore, this approach of a visual reasoning process is used to detect changes in the value of heritage and its multifaceted dimension in spatial and temporal terms. A new type of heritage required to support a visual reasoning process for heritage valuation has also been proposed. This type is supported by its usability and it covers the following types of heritage: available, captive, contextualized, decontextualized, original and vicarious. The development of a visual reasoning process for heritage valuation is innovative because it integrates the process for valuation of heritage, considering the multifaceted dimension of heritage and exploiting the potential of visual reasoning. In addition, potential users of the proposed process will have direct interaction with heritage and indirectly with the information about it, such as the metadata. Therefore, the proposed process enables potential users to be actively involved in their own heritage valuation.

A Semantic Approach to Problem-Based Learning with Conceptual Models

El aprendizaje basado en problemas se lleva aplicando con éxito durante las últimas tres décadas en un amplio rango de entornos de aprendizaje. Este enfoque educacional consiste en proponer problemas a los estudiantes de forma que puedan aprender sobre un dominio particular mediante el desarrollo de soluciones a dichos problemas. Si esto se aplica al modelado de conocimiento, y en particular al basado en Razonamiento Cualitativo, las soluciones a los problemas pasan a ser modelos que representan el compotamiento del sistema dinámico propuesto. Por lo tanto, la tarea del estudiante en este caso es acercar su modelo inicial (su primer intento de representar el sistema) a los modelos objetivo que proporcionan soluciones al problema, a la vez que adquieren conocimiento sobre el dominio durante el proceso. En esta tesis proponemos KaiSem, un método que usa tecnologías y recursos semánticos para guiar a los estudiantes durante el proceso de modelado, ayudándoles a adquirir tanto conocimiento como sea posible sin la directa supervisión de un profesor. Dado que tanto estudiantes como profesores crean sus modelos de forma independiente, estos tendrán diferentes terminologías y estructuras, dando lugar a un conjunto de modelos altamente heterogéneo. Para lidiar con tal heterogeneidad, proporcionamos una técnica de anclaje semántico para determinar, de forma automática, enlaces entre la terminología libre usada por los estudiantes y algunos vocabularios disponibles en la Web de Datos, facilitando con ello la interoperabilidad y posterior alineación de modelos. Por último, proporcionamos una técnica de feedback semántico para comparar los modelos ya alineados y generar feedback basado en las posibles discrepancias entre ellos. Este feedback es comunicado en forma de sugerencias individualizadas que el estudiante puede utilizar para acercar su modelo a los modelos objetivos en cuanto a su terminología y estructura se refiere. ABSTRACT Problem-based learning has been successfully applied over the last three decades to a diverse range of learning environments. This educational approach consists of posing problems to learners, so they can learn about a particular domain by developing solutions to them. When applied to conceptual modeling, and particularly to Qualitative Reasoning, the solutions to problems are models that represent the behavior of a dynamic system. Therefore, the learner's task is to move from their initial model, as their first attempt to represent the system, to the target models that provide solutions to that problem while acquiring domain knowledge in the process. In this thesis we propose KaiSem, a method for using semantic technologies and resources to scaffold the modeling process, helping the learners to acquire as much domain knowledge as possible without direct supervision from the teacher. Since learners and experts create their models independently, these will have different terminologies and structure, giving rise to a pool of models highly heterogeneous. To deal with such heterogeneity, we provide a semantic grounding technique to automatically determine links between the unrestricted terminology used by learners and some online vocabularies of the Web of Data, thus facilitating the interoperability and later alignment of the models. Lastly, we provide a semantic-based feedback technique to compare the aligned models and generate feedback based on the possible discrepancies. This feedback is communicated in the form of individualized suggestions, which can be used by the learner to bring their model closer in terminology and structure to the target models.

Estudio acústico y electroacústico para la realización de un musical en el teatro Rialto de Madrid

El propósito de este Proyecto Fin de Carrera es el estudio acústico y electroacústico de la realización del musical “Hoy no me puedo levantar” en el Teatro Rialto de Madrid en 2005. En primer lugar, se realiza una breve introducción histórica, citando sus remodelaciones y comentando la situación actual del recinto. Posteriormente, es analizado el equipo de sonido empleado en el espectáculo a partir de cada uno de los distintos controles de sonido: FOH (Front of Hause), monitores y microfonía inalámbrica. De cada uno de ellos se explican sus principales funciones y los sistemas que los conforman. También se describe la utilización de las cabinas insonorizadas. A continuación, se detallan los sistemas electroacústicos (empleados en el diseño) de la sonorización de dicho musical, que se consideran divididos en las siguientes partes: sistema principal, refuerzos y retardos, efectos y monitores. Además, se detalla el software RMS (Remote Monitoring System), que aporta información del funcionamiento de estos sistemas en tiempo real. Seguidamente, se exponen el equipo, procedimiento y resultados de la medida in situ en el Teatro, aplicando la Norma UNE-EN ISO 3382-2/2008 para obtener el tiempo de reverberación y ruido de fondo. Con el objeto de inicializar la simulación por ordenador, primero se exportan los planos originales de AutoCAD a EASE 4.4, donde se finaliza el proceso de modelar el recinto. Posteriormente, se asignan materiales, áreas de audiencia, puntos de escucha y se ubican los sistemas electroacústicos. Se afina el tiempo de reverberación obtenido en la medida in situ mediante materiales de la base de datos del propio software. También se ajustan los sistemas electroacústicos en el recinto para obtener la ecualización empleada y los niveles de presión sonora directo y total para distintas frecuencias. Una vez finalizados los pasos anteriores, se procede a realizar estudios psicoacústicos para comprobar posibles ecos y el efecto precedencia (empleando retardos electrónicos o delays). Finalmente, se realizan estudios de inteligibilidad, en los que se justifica la Claridad de Voz (C50) y Claridad Musical (C80); el Índice de inteligibilidad del habla (SII), la Pérdida de articulación de consonantes (Alcons) y el Índice de transmisión del habla (STI). Por último se expone el presupuesto del proyecto y del alquiler del equipo de sonido del musical y se exponen las conclusiones del Proyecto Final de Carrera. ABSTRACT. The purpose of this Final Degree Project is the acoustic and electro-acoustic study of the musical “Hoy No Me Puedo Levantar” at Teatro Rialto in 2005 (Madrid, Spain). First of all, a brief review of its history is made, quoting its refurbishments and discussing the current situation of this enclosure. Later, the sound equipment of the show is analyzed through every different sound controls: FOH (Front Of House), monitors and wireless microphones. There is also an explanation about their principal functions and systems, as well as a description of the soundproof cabins. Then, the electro-acoustic systems are detailed and divided in the following parts: main system, boosters and delays, effects and monitors. The RMS software (Remote Monitoring System) is described too, since it gives relevant information of the systems operations in real time. Afterwards, equipment, procedures and results of the measurements are exposed, applying the UNE-EN ISO 3382-2/2008 regulation in order to obtain the reverberation time and background noise of the theatre. With the purpose of initialize the computer simulation, original plans are exported from AutoCad to EASE 4.4., where its modeling process is ended. Materials, audience areas, hearing points and electro-acoustic locations are assigned below. At the same time, reverberation time is tuned up using database materials of the software itself. Also, electro-acoustic systems of the enclosure are adjusted to get the equalization and pressure sound levels of the different frequencies. Once previous steps are finished, psycho-acoustic studies are made to check possible echoes and the precedence effect - using electronic delays -. Finally, intelligibility studies are detailed, where the Voice and Musical Clarities are justified: The Speech Intelligibility Index, the Loss of Consonants Articulation and the Talk Transmission Index. This Final Degree Project ends describing the budget and rent of the sound equipment and the final conclusions.

PADRÕES DE PRODUTIVIDADE EM PESQUISA NA LITERATURA DE FINANÇAS: UM ESTUDO BIBLIOMÉTRICO NOS PRINCIPAIS PERIÓDICOS CIENTÍFICOS NACIONAIS NO PERÍODO DE 2005 A 2014

A Administração Financeira surge no início do século XIX juntamente com o movimento de consolidação das grandes empresas e a formação dos mercados nacionais americano enquanto que no Brasil os primeiros estudos ocorrem a partir da segunda metade do século XX. Desde entãoo país conseguiu consolidar alguns centros de excelência em pesquisa, formar grupo significativo de pesquisadores seniores e expandir as áreas de pesquisa no campo, contudo, ainda são poucos os trabalhos que buscam retratar as características da produtividade científica em Finanças. Buscando contribuir para a melhor compreensão do comportamento produtivo dessa área a presente pesquisa estuda sua produção científica, materializada na forma de artigos digitais, publicados em 24 conceituados periódicos nacionais classificados nos estratos Qualis/CAPES A2, B1 e B2 da Área de Administração, Ciências Contábeis e Turismo. Para tanto são aplicadas a Lei de Bradford, Lei do Elitismo de Price e Lei de Lotka. Pela Lei de Bradford são identificadas três zonas de produtividade sendo o núcleo formado por três revistas, estando uma delas classificada no estrato Qualis/CAPES B2, o que evidencia a limitação de um recorte tendo como único critério a classificação Qualis/CAPES. Para a Lei do Elitismo de Price, seja pela contagem direta ou completa, não identificamos comportamento de uma elite semelhante ao apontado pela teoria e que conta com grande número de autores com apenas uma publicação.Aplicando-se o modelo do Poder Inverso Generalizado, calculado por Mínimos Quadrados Ordinários (MQO), verificamos que produtividade dos pesquisadores, quando feita pela contagem direta, se adequa àquela definida pela Lei de Lotka ao nível de α = 0,01 de significância, contudo, pela contagem completa não podemos confirmar a hipótese de homogeneidade das distribuições, além do fato de que nas duas contagens a produtividade analisada pelo parâmetro n é maior que 2 e, portanto, a produtividade do pesquisadores de finanças é menor que a defendida pela teoria.

Desenvolvimento de um modelo baseado em agentes para investigar a conformação e evolução de padrões populacionais de atividade física no lazer em adultos

Introdução: Grande parte das ações para promover a atividade física no lazer em populações tem apresentado tamanhos de efeito pequenos ou inexistentes, ou resultados inconsistentes. Abordar o problema a partir da perspectiva sistêmica pode ser uma das formas de superar esse descompasso. Objetivo: Desenvolver um modelo baseado em agentes para investigar a conformação e evolução de padrões populacionais de atividade física no lazer em adultos a partir da interação entre atributos psicológicos dos indivíduos e atributos dos ambientes físico construído e social em que vivem. Métodos: O processo de modelagem foi composto por três etapas: elaboração de um mapa conceitual, com base em revisão da literatura e consulta com especialistas; criação e verificação do algoritmo do modelo; e parametrização e análise de consistência e sensibilidade. Os resultados da revisão da literatura foram consolidados e relatados de acordo com os domínios da busca (aspectos psicológicos, ambiente social e ambiente físico construído). Os resultados quantitativos da consulta com os especialistas foram descritos por meio de frequências e o conteúdo das respostas questões abertas foi analisado e compilado pelo autor desta tese. O algoritmo do modelo foi criado no software NetLogo, versão 5.2.1., seguindo-se um protocolo de verificação para garantir que o algoritmo fosse implementado acuradamente. Nas análises de consistência e sensibilidade, utilizaram-se o Teste A de Vargha-Delaney, coeficiente de correlação de postos parcial, boxplots e gráficos de linha e de dispersão. Resultados: Definiram-se como elementos do mapa conceitual a intenção da pessoa, o comportamento de pessoas próximas e da comunidade, e a percepção da qualidade, do acesso e das atividades disponíveis nos locais em que atividade física no lazer pode ser praticada. O modelo representa uma comunidade hipotética contendo dois tipos de agentes: pessoas e locais em que atividade física no lazer pode ser praticada. As pessoas interagem entre si e com o ambiente construído, gerando tendências temporais populacionais de prática de atividade física no lazer e de intenção. As análises de sensibilidade indicaram que as tendências temporais de atividade física no lazer e de intenção são altamente sensíveis à influência do comportamento atual da pessoa sobre a sua intenção futura, ao tamanho do raio de percepção da pessoa e à proporção de locais em que a atividade física no lazer pode ser praticada. Considerações finais: O mapa conceitual e o modelo baseado em agentes se mostraram adequados para investigar a conformação e evolução de padrões populacionais de atividade física no lazer em adultos. A influência do comportamento da pessoa sobre a sua intenção, o tamanho do raio de percepção da pessoa e a proporção de locais em que a atividade física no lazer pode ser praticada são importantes determinantes da conformação e evolução dos padrões populacionais de atividade física no lazer entre adultos no modelo.