Layered Information Modeling and a Knowledge Organization Paradigm: Inherent Classification and the Design of Interoperable Systems

In knowledge technology work, as expressed by the scope of this conference, there are a number of communities, each uncovering new methods, theories, and practices. The Library and Information Science (LIS) community is one such community. This community, through tradition and innovation, theories and practice, organizes knowledge and develops knowledge technologies formed by iterative research hewn to the values of equal access and discovery for all. The Information Modeling community is another contributor to knowledge technologies. It concerns itself with the construction of symbolic models that capture the meaning of information and organize it in ways that are computer-based, but human understandable. A recent paper that examines certain assumptions in information modeling builds a bridge between these two communities, offering a forum for a discussion on common aims from a common perspective. In a June 2000 article, Parsons and Wand separate classes from instances in information modeling in order to free instances from what they call the “tyranny” of classes. They attribute a number of problems in information modeling to inherent classification – or the disregard for the fact that instances can be conceptualized independent of any class assignment. By faceting instances from classes, Parsons and Wand strike a sonorous chord with classification theory as understood in LIS. In the practice community and in the publications of LIS, faceted classification has shifted the paradigm of knowledge organization theory in the twentieth century. Here, with the proposal of inherent classification and the resulting layered information modeling, a clear line joins both the LIS classification theory community and the information modeling community. Both communities have their eyes turned toward networked resource discovery, and with this conceptual conjunction a new paradigmatic conversation can take place. Parsons and Wand propose that the layered information model can facilitate schema integration, schema evolution, and interoperability. These three spheres in information modeling have their own connotation, but are not distant from the aims of classification research in LIS. In this new conceptual conjunction, established by Parsons and Ward, information modeling through the layered information model, can expand the horizons of classification theory beyond LIS, promoting a cross-fertilization of ideas on the interoperability of subject access tools like classification schemes, thesauri, taxonomies, and ontologies. This paper examines the common ground between the layered information model and faceted classification, establishing a vocabulary and outlining some common principles. It then turns to the issue of schema and the horizons of conventional classification and the differences between Information Modeling and Library and Information Science. Finally, a framework is proposed that deploys an interpretation of the layered information modeling approach in a knowledge technologies context. In order to design subject access systems that will integrate, evolve and interoperate in a networked environment, knowledge organization specialists must consider a semantic class independence like Parsons and Wand propose for information modeling.

Modeling the Aesthetic Axis of Information Organization Frameworks, Part 1: Theoretical Basis

Purpose – The purpose of this paper is to propose a theoretical framework, based on contemporary philosophical aesthetics, from which principled assessments of the aesthetic value of information organization frameworks may be conducted.Design/methodology/approach – This paper identifies appropriate discourses within the field of philosophical aesthetics, constructs from them a framework for assessing aesthetic properties of information organization frameworks. This framework is then applied in two case studies examining the Library of Congress Subject Headings (LCSH), and Sexual Nomenclature: A Thesaurus. Findings – In both information organization frameworks studied, the aesthetic analysis was useful in identifying judgments of the frameworks as aesthetic judgments, in promoting discovery of further areas of aesthetic judgments, and in prompting reflection on the nature of these aesthetic judgments. Research limitations/implications – This study provides proof-of-concept for the aesthetic evaluation of information organization frameworks. Areas of future research are identified as the role of cultural relativism in such aesthetic evaluation and identification of appropriate aesthetic properties of information organization frameworks.Practical implications – By identifying a subset of judgments of information organization frameworks as aesthetic judgments, aesthetic evaluation of such frameworks can be made explicit and principled. Aesthetic judgments can be separated from questions of economic feasibility, functional requirements, and user-orientation. Design and maintenance of information organization frameworks can be based on these principles.Originality/value – This study introduces a new evaluative axis for information organization frameworks based on philosophical aesthetics. By improving the evaluation of such novel frameworks, design and maintenance can be guided by these principles.Keywords Evaluation, Research methods, Analysis, Bibliographic systems, Indexes, Retrieval languages

Modeling the Aesthetic Axis of Information Organization Frameworks, Part 2: Case Studies

Purpose – The purpose of this paper is to propose a theoretical framework, based on contemporary philosophical aesthetics, from which principled assessments of the aesthetic value of information organization frameworks may be conducted.Design/methodology/approach – This paper identifies appropriate discourses within the field of philosophical aesthetics, constructs from them a framework for assessing aesthetic properties of information organization frameworks. This framework is then applied in two case studies examining the Library of Congress Subject Headings (LCSH), and Sexual Nomenclature: A Thesaurus. Findings – In both information organization frameworks studied, the aesthetic analysis was useful in identifying judgments of the frameworks as aesthetic judgments, in promoting discovery of further areas of aesthetic judgments, and in prompting reflection on the nature of these aesthetic judgments. Research limitations/implications – This study provides proof-of-concept for the aesthetic evaluation of information organization frameworks. Areas of future research are identified as the role of cultural relativism in such aesthetic evaluation and identification of appropriate aesthetic properties of information organization frameworks.Practical implications – By identifying a subset of judgments of information organization frameworks as aesthetic judgments, aesthetic evaluation of such frameworks can be made explicit and principled. Aesthetic judgments can be separated from questions of economic feasibility, functional requirements, and user-orientation. Design and maintenance of information organization frameworks can be based on these principles.Originality/value – This study introduces a new evaluative axis for information organization frameworks based on philosophical aesthetics. By improving the evaluation of such novel frameworks, design and maintenance can be guided by these principles.Keywords Evaluation, Analysis, Bibliographic systems, Indexes, Retrieval languages, Philosophy

Analisi costi-benefici del Building Information Modeling (BIM) mediante casi studio e simulazione

Il lavoro svolto in questa tesi vuole proporsi come un’analisi critica ed economica di ciò che il Building Information Modeling (BIM) rappresenta. La tesi si articola in una prima introduzione sul panorama attuale, identificando il problema che costituisce la sfida ingegneristica: l’ottimizzazione dei processi tecnici e realizzativi dell’industria delle costruzioni, migliorandone l’interoperabilità. Di seguito, dopo un’attenta valutazione della letteratura disponibile, si desumeranno quanti più dati validi per dare compiutezza alle analisi che verranno svolte dopo, in merito agli aspetti tecnici, pratici, e ai risvolti economici annessi. Si è scelto come oggetto di studio un esperimento di collaborazione con l’Università di Ferrara. Per dimostrare le potenzialità del BIM, si è voluto riproporre in ambito accademico un’anteprima della realtà professionale, affinché la simulazione possa essere quanto più fedele alle problematiche discusse. Il lavoro svolto ha previsto la creazione del modello architettonico e strutturale del Co-Housing San Rocco, un complesso di edifici di nuova realizzazione proposto nella tesi di Bulletti. Il compito di ogni tesista è ben definito: Bulletti Simone, studente di Architettura dell’Università di Ferrara, ha trattato gli aspetti architettonici del progetto. L’autore della presente tesi ha invece sviluppato il modello strutturale, svolgendo in seguito un’analisi dei vantaggi economici e gestionali che questa metodologia ha offerto.

Building Information Modeling e Maintenance Management: il caso del Pro-GET-onE

La tesi ha come obiettivo quello di analizzare l’evoluzione del settore della manutenzione edilizia e del cambiamento della politica manutentiva in relazione ai progressi portati dai nuovi strumenti informatici: facendo quindi riferimento ad uno specifico caso di studio e integrando l’utilizzo di software BIM, lo scopo è stato quello di programmare un life cycle adeguato. La prima parte della tesi delinea il cambiamento del quadro normativo dell’ambito della manutenzione e definisce lo stato dell’arte della pratica manutentiva, sia dal punto di vista tecnico e applicativo, ma anche da quello gestionale ed economico, con particolare riferimento al Maintenance Management. Nella seconda parte viene invece approfondito il caso studio di uno studentato di Atene facente parte del programma ProGETonE, definendo gli elementi che possono portare ad una corretta gestione del ciclo di vita di questo fabbricato: l’analisi parte da un approccio tradizionale, basato sul computo metrico e sulla PBS, ma si sviluppa e completa attraverso l’utilizzo di Revit e Mantus-P, con la relativa stesura finale di un piano di manutenzione. Questo processo ha portato ad evidenziare le differenze e i vantaggi che si possono trarre dal cambio di prospettiva e di strumenti nell’ambito della manutenzione edilizia.

The Coupled Aerosol and Tracer Transport model to the Brazilian developments on the Regional Atmospheric Modeling System (CATT-BRAMS) - Part 1: Model description and evaluation

We introduce the Coupled Aerosol and Tracer Transport model to the Brazilian developments on the Regional Atmospheric Modeling System (CATT-BRAMS). CATT-BRAMS is an on-line transport model fully consistent with the simulated atmospheric dynamics. Emission sources from biomass burning and urban-industrial-vehicular activities for trace gases and from biomass burning aerosol particles are obtained from several published datasets and remote sensing information. The tracer and aerosol mass concentration prognostics include the effects of sub-grid scale turbulence in the planetary boundary layer, convective transport by shallow and deep moist convection, wet and dry deposition, and plume rise associated with vegetation fires in addition to the grid scale transport. The radiation parameterization takes into account the interaction between the simulated biomass burning aerosol particles and short and long wave radiation. The atmospheric model BRAMS is based on the Regional Atmospheric Modeling System (RAMS), with several improvements associated with cumulus convection representation, soil moisture initialization and surface scheme tuned for the tropics, among others. In this paper the CATT-BRAMS model is used to simulate carbon monoxide and particulate material (PM(2.5)) surface fluxes and atmospheric transport during the 2002 LBA field campaigns, conducted during the transition from the dry to wet season in the southwest Amazon Basin. Model evaluation is addressed with comparisons between model results and near surface, radiosondes and airborne measurements performed during the field campaign, as well as remote sensing derived products. We show the matching of emissions strengths to observed carbon monoxide in the LBA campaign. A relatively good comparison to the MOPITT data, in spite of the fact that MOPITT a priori assumptions imply several difficulties, is also obtained.

Cloud condensation nuclei in pristine tropical rainforest air of Amazonia: size-resolved measurements and modeling of atmospheric aerosol composition and CCN activity

Atmospheric aerosol particles serving as cloud condensation nuclei (CCN) are key elements of the hydrological cycle and climate. We have measured and characterized CCN at water vapor supersaturations in the range of S=0.10-0.82% in pristine tropical rainforest air during the AMAZE-08 campaign in central Amazonia. The effective hygroscopicity parameters describing the influence of chemical composition on the CCN activity of aerosol particles varied in the range of kappa approximate to 0.1-0.4 (0.16+/-0.06 arithmetic mean and standard deviation). The overall median value of kappa approximate to 0.15 was by a factor of two lower than the values typically observed for continental aerosols in other regions of the world. Aitken mode particles were less hygroscopic than accumulation mode particles (kappa approximate to 0.1 at D approximate to 50 nm; kappa approximate to 0.2 at D approximate to 200 nm), which is in agreement with earlier hygroscopicity tandem differential mobility analyzer (H-TDMA) studies. The CCN measurement results are consistent with aerosol mass spectrometry (AMS) data, showing that the organic mass fraction (f(org)) was on average as high as similar to 90% in the Aitken mode (D <= 100 nm) and decreased with increasing particle diameter in the accumulation mode (similar to 80% at D approximate to 200 nm). The kappa values exhibited a negative linear correlation with f(org) (R(2)=0.81), and extrapolation yielded the following effective hygroscopicity parameters for organic and inorganic particle components: kappa(org)approximate to 0.1 which can be regarded as the effective hygroscopicity of biogenic secondary organic aerosol (SOA) and kappa(inorg)approximate to 0.6 which is characteristic for ammonium sulfate and related salts. Both the size dependence and the temporal variability of effective particle hygroscopicity could be parameterized as a function of AMS-based organic and inorganic mass fractions (kappa(p)=kappa(org) x f(org)+kappa(inorg) x f(inorg)). The CCN number concentrations predicted with kappa(p) were in fair agreement with the measurement results (similar to 20% average deviation). The median CCN number concentrations at S=0.1-0.82% ranged from N(CCN,0.10)approximate to 35 cm(-3) to N(CCN,0.82)approximate to 160 cm(-3), the median concentration of aerosol particles larger than 30 nm was N(CN,30)approximate to 200 cm(-3), and the corresponding integral CCN efficiencies were in the range of N(CCN,0.10/NCN,30)approximate to 0.1 to N(CCN,0.82/NCN,30)approximate to 0.8. Although the number concentrations and hygroscopicity parameters were much lower in pristine rainforest air, the integral CCN efficiencies observed were similar to those in highly polluted megacity air. Moreover, model calculations of N(CCN,S) assuming an approximate global average value of kappa approximate to 0.3 for continental aerosols led to systematic overpredictions, but the average deviations exceeded similar to 50% only at low water vapor supersaturation (0.1%) and low particle number concentrations (<= 100 cm(-3)). Model calculations assuming aconstant aerosol size distribution led to higher average deviations at all investigated levels of supersaturation: similar to 60% for the campaign average distribution and similar to 1600% for a generic remote continental size distribution. These findings confirm earlier studies suggesting that aerosol particle number and size are the major predictors for the variability of the CCN concentration in continental boundary layer air, followed by particle composition and hygroscopicity as relatively minor modulators. Depending on the required and applicable level of detail, the information and parameterizations presented in this paper should enable efficient description of the CCN properties of pristine tropical rainforest aerosols of Amazonia in detailed process models as well as in large-scale atmospheric and climate models.

MODELING SCIENTIFIC AGENTS FOR A BETTER SCIENCE

Science is a fundamental human activity and we trust its results because it has several error-correcting mechanisms. It is subject to experimental tests that are replicated by independent parts. Given the huge amount of information available and the information asymetry between producers and users of knowledge, scientists have to rely on the reports of others. This makes it possible for social effects to influence the scientific community. Here, an Opinion Dynamics agent model is proposed to describe this situation. The influence of Nature through experiments is described as an external field that acts on the experimental agents. We will see that the retirement of old scientists can be fundamental in the acceptance of a new theory. We will also investigate the interplay between social influence and observations. This will allow us to gain insight in the problem of when social effects can have negligible effects in the conclusions of a scientific community and when we should worry about them.

Modeling associations between genetic markers using Bayesian networks

Motivation: Understanding the patterns of association between polymorphisms at different loci in a population ( linkage disequilibrium, LD) is of fundamental importance in various genetic studies. Many coefficients were proposed for measuring the degree of LD, but they provide only a static view of the current LD structure. Generative models (GMs) were proposed to go beyond these measures, giving not only a description of the actual LD structure but also a tool to help understanding the process that generated such structure. GMs based in coalescent theory have been the most appealing because they link LD to evolutionary factors. Nevertheless, the inference and parameter estimation of such models is still computationally challenging. Results: We present a more practical method to build GM that describe LD. The method is based on learning weighted Bayesian network structures from haplotype data, extracting equivalence structure classes and using them to model LD. The results obtained in public data from the HapMap database showed that the method is a promising tool for modeling LD. The associations represented by the learned models are correlated with the traditional measure of LD D`. The method was able to represent LD blocks found by standard tools. The granularity of the association blocks and the readability of the models can be controlled in the method. The results suggest that the causality information gained by our method can be useful to tell about the conservability of the genetic markers and to guide the selection of subset of representative markers.

Modeling of Distributed Control Systems in Intelligent Building based on Colored Petri Nets

Distributed control systems consist of sensors, actuators and controllers, interconnected by communication networks and are characterized by a high number of concurrent process. This work presents a proposal for a procedure to model and analyze communication networks for distributed control systems in intelligent building. The approach considered for this purpose is based on the characterization of the control system as a discrete event system and application of coloured Petri net as a formal method for specification, analysis and verification of control solutions. With this approach, we develop the models that compose the communication networks for the control systems of intelligent building, which are considered the relationships between the various buildings systems. This procedure provides a structured development of models, facilitating the process of specifying the control algorithm. An application example is presented in order to illustrate the main features of this approach.

Adaptive Approach for a Maximum Entropy Algorithm in Ecological Niche Modeling

This paper presents an Adaptive Maximum Entropy (AME) approach for modeling biological species. The Maximum Entropy algorithm (MaxEnt) is one of the most used methods in modeling biological species geographical distribution. The approach presented here is an alternative to the classical algorithm. Instead of using the same set features in the training, the AME approach tries to insert or to remove a single feature at each iteration. The aim is to reach the convergence faster without affect the performance of the generated models. The preliminary experiments were well performed. They showed an increasing on performance both in accuracy and in execution time. Comparisons with other algorithms are beyond the scope of this paper. Some important researches are proposed as future works.

Evaluation of Adaptive Genetic Algorithm to Environmental Modeling of Peponapis and Cucurbita

This paper presents a free software tool that supports the next-generation Mobile Communications, through the automatic generation of models of components and electronic devices based on neural networks. This tool enables the creation, training, validation and simulation of the model directly from measurements made on devices of interest, using an interface totally oriented to non-experts in neural models. The resulting model can be exported automatically to a traditional circuit simulator to test different scenarios.

Different Approaches for Modeling Grouped Survival Data: A Mango Tree Study

Interval-censored survival data, in which the event of interest is not observed exactly but is only known to occur within some time interval, occur very frequently. In some situations, event times might be censored into different, possibly overlapping intervals of variable widths; however, in other situations, information is available for all units at the same observed visit time. In the latter cases, interval-censored data are termed grouped survival data. Here we present alternative approaches for analyzing interval-censored data. We illustrate these techniques using a survival data set involving mango tree lifetimes. This study is an example of grouped survival data.

A generalized modified Weibull distribution for lifetime modeling

A four parameter generalization of the Weibull distribution capable of modeling a bathtub-shaped hazard rate function is defined and studied. The beauty and importance of this distribution lies in its ability to model monotone as well as non-monotone failure rates, which are quite common in lifetime problems and reliability. The new distribution has a number of well-known lifetime special sub-models, such as the Weibull, extreme value, exponentiated Weibull, generalized Rayleigh and modified Weibull distributions, among others. We derive two infinite sum representations for its moments. The density of the order statistics is obtained. The method of maximum likelihood is used for estimating the model parameters. Also, the observed information matrix is obtained. Two applications are presented to illustrate the proposed distribution. (C) 2008 Elsevier B.V. All rights reserved.

Modeling control objectives for business process compliance

Business process design is primarily driven by process improvement objectives. However, the role of control objectives stemming from regulations and standards is becoming increasingly important for businesses in light of recent events that led to some of the largest scandals in corporate history. As organizations strive to meet compliance agendas, there is an evident need to provide systematic approaches that assist in the understanding of the interplay between (often conflicting) business and control objectives during business process design. In this paper, our objective is twofold. We will firstly present a research agenda in the space of business process compliance, identifying major technical and organizational challenges. We then tackle a part of the overall problem space, which deals with the effective modeling of control objectives and subsequently their propagation onto business process models. Control objective modeling is proposed through a specialized modal logic based on normative systems theory, and the visualization of control objectives on business process models is achieved procedurally. The proposed approach is demonstrated in the context of a purchase-to-pay scenario.