The effects of explicit versus parameterized convection on the MJO in a large-domain high-resolution tropical case study. Part II: Processes leading to differences in MJO development

High-resolution simulations over a large tropical domain (∼20◦S–20◦N and 42◦E–180◦E) using both explicit and parameterized convection are analyzed and compared during a 10-day case study of an active Madden-Julian Oscillation (MJO) event. In Part II, the moisture budgets and moist entropy budgets are analyzed. Vertical subgrid diabatic heating profiles and vertical velocity profiles are also compared; these are related to the horizontal and vertical advective components of the moist entropy budget which contribute to gross moist stability, GMS, and normalized GMS (NGMS). The 4-km model with explicit convection and good MJO performance has a vertical heating structure that increases with height in the lower troposphere in regions of strong convection (like observations), whereas the 12-km model with parameterized convection and a poor MJO does not show this relationship. The 4-km explicit convection model also has a more top-heavy heating profile for the troposphere as a whole near and to the west of the active MJO-related convection, unlike the 12-km parameterized convection model. The dependence of entropy advection components on moisture convergence is fairly weak in all models, and differences between models are not always related to MJO performance, making comparisons to previous work somewhat inconclusive. However, models with relatively good MJO strength and propagation have a slightly larger increase of the vertical advective component with increasing moisture convergence, and their NGMS vertical terms have more variability in time and longitude, with total NGMS that is comparatively larger to the west and smaller to the east.

Development of a two-step screening ESI-TOF-MS method for rapid determination of significant stress-induced metabolome modifications in plant leaf extracts: the wound response in Arabidopsis thaliana as a case study.

To study the stress-induced effects caused by wounding under a new perspective, a metabolomic strategy based on HPLC-MS has been devised for the model plant Arabidopsis thaliana. To detect induced metabolites and precisely localise these compounds among the numerous constitutive metabolites, HPLC-MS analyses were performed in a two-step strategy. In a first step, rapid direct TOF-MS measurements of the crude leaf extract were performed with a ballistic gradient on a short LC-column. The HPLC-MS data were investigated by multivariate analysis as total mass spectra (TMS). Principal components analysis (PCA) and hierarchical cluster analysis (HCA) on principal coordinates were combined for data treatment. PCA and HCA demonstrated a clear clustering of plant specimens selecting the highest discriminating ions given by the complete data analysis, leading to the specific detection of discrete-induced ions (m/z values). Furthermore, pool constitution with plants of homogeneous behaviour was achieved for confirmatory analysis. In this second step, long high-resolution LC profilings on an UPLC-TOF-MS system were used on pooled samples. This allowed to precisely localise the putative biological marker induced by wounding and by specific extraction of accurate m/z values detected in the screening procedure with the TMS spectra.

Best Practices of Sport For Development: A Case Study of An African Organization

Sport-for-development is the active practice of achieving social ideals through the use of sport and other traditional development programs. The purpose of this thesis was to evaluate SFD best practices from the context of an African organization development project. The case was a development organization in Zambia, Africa that was utilizing sport within its strategy. The data collection and analysis framed using Curado and Bontis (2007) MIC Matrix, the Sport For Development International Working Group’s (2007) best practices model, and B. Kidd’s (2011) Sport-in-Development Logic Model. The research supports that a SFD project is multi-faceted and should include the employment of strategic community programming on the basis of collaborative and integrative sport, health care and education. Further, the researcher found that the best practices include setting specific goals and objectives, as well as instituting regular monitoring and evaluation strategies

Social entrepreneurship, microcredit and development challenges: a case study analysis of Banco Pérola

The term “social entrepreneurship” has been attracting growing interest from different sectors in the past years, driven by the possibility of employing business techniques to tackle recurrent social and environmental issues. At the forefront of this global phenomenon is microcredit, seen by many as an effective anti-poverty tool and having the Grameen Bank as its flagship program. While the prospects of social entrepreneurship seem promising, the newness of the concept and its somewhat confusing definition make conditions difficult to analyze this contemporary phenomenon. Therefore, the objective of this study was to discuss the challenges faced by social entrepreneurs and alternatives of development for social businesses through a case study on a Brazilian microcredit institution and inclusive business, Banco Pérola. The case addresses a growing need for case studies designed for teaching in the field of social entrepreneurship. It was focused mainly on understanding the development challenges within Banco Pérola, and built based on interviews carried out with top management, credit officer and clients of the institution, as well as on secondary data collected. An analysis of the case study was performed under a Teaching Notes. As illustrated by the Banco Pérola case, the main difficulties encountered by social entrepreneurs relate to the systematization of processes and creation of operational routines, including for performance evaluation (impact assessment tools); to the capture and management of both financial and human capital; to scaling up the business model and to the need of forging closer and more personal relationships with customers as against in traditional banking practices. In spite of certain limitations, such as the fact that the case might soon become outdated due to the fast-changing environment surrounding Banco Pérola, or the fact that not all relevant stakeholders (e.g. partners) were selected for interviews, the research objective has been achieved and the study can be seen as a contribution to spreading the concept of social entrepreneurship.

Desenvolvimento de sistemas orientado a modelos

The Software Engineering originated with the motivation to mass produce components for increased productivity in production systems. Since its origins, numerous studies have been proposed on the subject as new features in the creation of systems, like the Object- Oriented Programming and Aspect-Oriented Programming, have been established and methodologies have been developed to control them efficiently. However, years of studies in the area were not sufficient to create a methodology for reusing software artifacts really efficient and easy enough to be widespread. Given this, the Model-Driven Development (MDD) is trying to promote it using the modeling of systems as a reference, becoming part of it and establishing a huge productivity gain. One of his approaches is called Model-Driven Software Development (MDSD), which focuses on improving the practices and systems development using Domain-Specific Languages (DSL) for this purpose. In this Final Paper, Xtext is used as a tool to prove the productivity and efficiency of this approach, and for that bibliographic studies were made on the approach and the tool, and show the methodology and a case study to demonstrate results and conclusions regarding this work

Social tags and linked data for ontology development: a case study in the financial domain

We describe a domain ontology development approach that extracts domain terms from folksonomies and enrich them with data and vocabularies from the Linked Open Data cloud. As a result, we obtain lightweight domain ontologies that combine the emergent knowledge of social tagging systems with formal knowledge from Ontologies. In order to illustrate the feasibility of our approach, we have produced an ontology in the financial domain from tags available in Delicious, using DBpedia, OpenCyc and UMBEL as additional knowledge sources.

Development of a technological innovation capability assessment model:a case study of manufacturing SMEs in Sialkot, Pakistan

Small and Medium Enterprises (SMEs) play an important part in the economy of any country. Initially, a flat management hierarchy, quick response to market changes and cost competitiveness were seen as the competitive characteristics of an SME. Recently, in developed economies, technological capabilities (TCs) management- managing existing and developing or assimilating new technological capabilities for continuous process and product innovations, has become important for both large organisations and SMEs to achieve sustained competitiveness. Therefore, various technological innovation capability (TIC) models have been developed at firm level to assess firms‘ innovation capability level. These models output help policy makers and firm managers to devise policies for deepening a firm‘s technical knowledge generation, acquisition and exploitation capabilities for sustained technological competitive edge. However, in developing countries TCs management is more of TCs upgrading: acquisitions of TCs from abroad, and then assimilating, innovating and exploiting them. Most of the TIC models for developing countries delineate the level of TIC required as firms move from the acquisition to innovative level. However, these models do not provide tools for assessing the existing level of TIC of a firm and various factors affecting TIC, to help practical interventions for TCs upgrading of firms for improved or new processes and products. Recently, the Government of Pakistan (GOP) has realised the importance of TCs upgrading in SMEs-especially export-oriented, for their sustained competitiveness. The GOP has launched various initiatives with local and foreign assistance to identify ways and means of upgrading local SMEs capabilities. This research targets this gap and developed a TICs assessment model for identifying the existing level of TIC of manufacturing SMEs existing in clusters in Sialkot, Pakistan. SME executives in three different export-oriented clusters at Sialkot were interviewed to analyse technological capabilities development initiatives (CDIs) taken by them to develop and upgrade their firms‘ TCs. Data analysed at CDI, firm, cluster and cross-cluster level first helped classify interviewed firms as leader, follower and reactor, with leader firms claiming to introduce mostly new CDIs to their cluster. Second, the data analysis displayed that mostly interviewed leader firms exhibited ‗learning by interacting‘ and ‗learning by training‘ capabilities for expertise acquisition from customers and international consultants. However, these leader firms did not show much evidence of learning by using, reverse engineering and R&D capabilities, which according to the extant literature are necessary for upgrading existing TIC level and thus TCs of firm for better value-added processes and products. The research results are supported by extant literature on Sialkot clusters. Thus, in sum, a TIC assessment model was developed in this research which qualitatively identified interviewed firms‘ TIC levels, the factors affecting them, and is validated by existing literature on interviewed Sialkot clusters. Further, the research gives policy level recommendations for TIC and thus TCs upgrading at firm and cluster level for targeting better value-added markets.

A case study of the development of the Argentinean community college system

In the 1980's and 1990's, Argentina was undergoing significant political, social and economic changes as a result of the change over from a military driven government to elected governments. A major aspect of the change was an increased emphasis on privatization, and promotion of foreign and domestic investment in Argentina. Higher education leaders were increasingly drawn into developing a national strategy for changing the educational structure to help facilitate changes in other aspects of the society. Preliminary reviews by the Argentinean higher education leaders indicated that adaptation of the American community college promised to help achieve the national goals. ^ The purpose of this study was to determine: if and how the community college concept, an American invention, could be adapted to function in Argentina, a nation with a significantly different history of political, social, cultural and economic development. Achieving this purpose involved: identifying the key leaders in the movement that developed to apply the community college concept in Argentina; the study of their perspectives regarding the movement as it developed; and tracking the assistance given by selected American community college leaders. ^ The case study method was employed in this research, using interview and historical data collection. Key leaders from higher education in the United States and Argentina were interviewed in-depth, to determine their views. An interview protocol with appropriate sub-questions was followed to ensure complete coverage. The interviewees identified several major areas of education in need of change including, the system, access to the system, new areas of study, integration into the hemisphere and, in general, decentralization. Historical review revealed a steady development of the community college concept in Argentina reflected in documentation of events, conceptual writings and legal structures. ^ It was concluded that there is a community college structure beginning to emerge that, so far, in broad outline, follows the structure developed in the United States. It is anticipated however, that future developments will include conceptual aspects to the model reflective of Argentina. ^

A middleware to support services delivery in a domain-specific virtual machine

The increasing use of model-driven software development has renewed emphasis on using domain-specific models during application development. More specifically, there has been emphasis on using domain-specific modeling languages (DSMLs) to capture user-specified requirements when creating applications. The current approach to realizing these applications is to translate DSML models into source code using several model-to-model and model-to-code transformations. This approach is still dependent on the underlying source code representation and only raises the level of abstraction during development. Experience has shown that developers will many times be required to manually modify the generated source code, which can be error-prone and time consuming. ^ An alternative to the aforementioned approach involves using an interpreted domain-specific modeling language (i-DSML) whose models can be directly executed using a Domain Specific Virtual Machine (DSVM). Direct execution of i-DSML models require a semantically rich platform that reduces the gap between the application models and the underlying services required to realize the application. One layer in this platform is the domain-specific middleware that is responsible for the management and delivery of services in the specific domain. ^ In this dissertation, we investigated the problem of designing the domain-specific middleware of the DSVM to facilitate the bifurcation of the semantics of the domain and the model of execution (MoE) while supporting runtime adaptation and validation. We approached our investigation by seeking solutions to the following sub-problems: (1) How can the domain-specific knowledge (DSK) semantics be separated from the MoE for a given domain? (2) How do we define a generic model of execution (GMoE) of the middleware so that it is adaptable and realizes DSK operations to support delivery of services? (3) How do we validate the realization of DSK operations at runtime? ^ Our research into the domain-specific middleware was done using an i-DSML for the user-centric communication domain, Communication Modeling Language (CML), and for microgrid energy management domain, Microgrid Modeling Language (MGridML). We have successfully developed a methodology to separate the DSK and GMoE of the middleware of a DSVM that supports specialization for a given domain, and is able to perform adaptation and validation at runtime. ^

Infomobility for “Car-Driver” Systems: Reference Model and Case Study

Part 21: Mobility and Logistics

Simulating customer experience and word-of-mouth in retail: a case study

Agents offer a new and exciting way of understanding the world of work. In this paper we describe the development of agent-based simulation models, designed to help to understand the relationship between people management practices and retail performance. We report on the current development of our simulation models which includes new features concerning the evolution of customers over time. To test the features we have conducted a series of experiments dealing with customer pool sizes, standard and noise reduction modes, and the spread of customers’ word of mouth. To validate and evaluate our model, we introduce new performance measure specific to retail operations. We show that by varying different parameters in our model we can simulate a range of customer experiences leading to significant differences in performance measures. Ultimately, we are interested in better understanding the impact of changes in staff behavior due to changes in store management practices. Our multi-disciplinary research team draws upon expertise from work psychologists and computer scientists. Despite the fact we are working within a relatively novel and complex domain, it is clear that intelligent agents offer potential for fostering sustainable organizational capabilities in the future.

Knowledge transfer in product development processes: A case study in small and medium enterprises (SMEs) of the metal-mechanic sector from Sao Paulo, Brazil

This paper reports a research that evaluated the product development methodologies used in Brazilian small and medium-sized metal-mechanic enterprises (SMEs), in a specific region of Sao Paulo. The tool used for collecting the data was a questionnaire, which was developed and applied through interviews conducted by the researchers in 32 companies. The main focus of this paper can be condensed in the synthesis-question ""Is only the company responsible for the development?"" which was analyzed thoroughly. The results obtained from this analysis were evaluated directly (through the respective percentages of answers) and statistically (through the search of an index which demonstrates if two questions are related). The results point to a degree of maturity in SMEs, which allows product development to be conducted in cooperation networks. (C) 2007 Elsevier Ltd. All rights reserved.

The young women's network: A case study in community development

While young women have been found to be at additional risk for psychological morbidity after a breast cancer diagnosis, their specific needs in relation to support are not well described. A community development approach was utilized to develop the Young Women's Network, a peer support programme for young women who have been diagnosed with breast cancer that addresses their specific psychological and social needs, Central to this approach was the key role of the target group in both the definition of the problem and the generation of the solutions. This article describes the steps involved in developing this programme and guidelines for health professionals and community members who may wish to replicate either the Young Women's Network or this particular approach to programme development. Copyright (C), 2001 John Wiley & Sons, Ltd.