Operational modal monitoring of ancient structures using wireless technology

Operational Modal Analysis is currently applied in structural dynamic monitoring studies using conventional wired based sensors and data acquisition platforms. This approach, however, becomes inadequate in cases where the tests are performed in ancient structures with esthetic concerns or in others, where the use of wires greatly impacts the monitoring system cost and creates difficulties in the maintenance and deployment of data acquisition platforms. In these cases, the use of sensor platforms based on wireless and MEMS would clearly benefit these applications. This work presents a first attempt to apply this wireless technology to the structural monitoring of historical masonry constructions in the context of operational modal analysis. Commercial WSN platforms were used to study one laboratory specimen and one of the structural elements of a XV century building in Portugal. Results showed that in comparison to the conventional wired sensors, wireless platforms have poor performance in respect to the acceleration time series recorded and the detection of modal shapes. However, for frequency detection issues, reliable results were obtained, especially when random excitation was used as noise source.

Metabolic syndrome in fixed-shift workers

OBJECTIVE To analyze if metabolic syndrome and its altered components are associated with demographic, socioeconomic and behavioral factors in fixed-shift workers.METHODS A cross-sectional study was conducted on a sample of 902 shift workers of both sexes in a poultry processing plant in Southern Brazil in 2010. The diagnosis of metabolic syndrome was determined according to the recommendations from Harmonizing the Metabolic Syndrome. Its frequency was evaluated according to the demographic (sex, skin color, age and marital status), socioeconomic (educational level, income and work shift), and behavioral characteristics (smoking, alcohol intake, leisure time physical activity, number of meals and sleep duration) of the sample. The multivariate analysis followed a theoretical framework for identifying metabolic syndrome in fixed-shift workers.RESULTS The prevalence of metabolic syndrome in the sample was 9.3% (95%CI 7.4;11.2). The most frequently altered component was waist circumference (PR 48.4%; 95%CI 45.5;51.2), followed by high-density lipoprotein. Work shift was not associated with metabolic syndrome and its altered components. After adjustment, the prevalence of metabolic syndrome was positively associated with women (PR 2.16; 95%CI 1.28;3.64), workers aged over 40 years (PR 3.90; 95%CI 1.78;8.93) and those who reported sleeping five hours or less per day (PR 1.70; 95%CI 1.09;2.24). On the other hand, metabolic syndrome was inversely associated with educational level and having more than three meals per day (PR 0.43; 95%CI 0.26;0.73).CONCLUSIONS Being female, older and deprived of sleep are probable risk factors for metabolic syndrome, whereas higher educational level and higher number of meals per day are protective factors for metabolic syndrome in fixed-shift workers.

Schistosoma mansoni: effects of anesthetics and antimonial drugs on worm shift in the mouse

Mice experimentally infected with Schistosoma mansoni were injected with sodium thiopental or sodium antimonyl gluconate (Triostib R), or submitted to halothane inhalation, with or without a previous injection of thiopental. Data obtained showed that halothane and thiopental induce worm shift to the liver (99 and 76%, respectively). Sodium gluconate and antimonium (Triostib R) shifted 52% of worms towards the liver. These results seem to indicate that the use of antimonium would be unnecessary, when surgical removal of schistosomules is carried out through the extracorporeal filtration technique, in patients with portal hypertension.

Fast-to-fed shift in glucose homeostasis: clues to an earlier detection of human prediabetic states

FCM: UC Bioquímica I - PhD Thesis

Massive shift in the pneumococcal nasopharyngeal flora after the 7-valent conjugate vaccine: epidemiological studies and testing pathogenic potential in animal models

Dissertation presented to obtain the PhD degree in Biology/Molecular Biology by Universidade Nova de Lisboa, Instituto de Tecnologia Química e Biológica

SHIFT IN HUMAN ROTAVIRUS DISTRIBUTION IN BELO HORIZONTE, BRAZIL DETECTED BY RIBONUCLEIC ACID ELECTROPHORESIS

Rotavirus has been considered the main agent of infectious diarrhea especially among younger children. We addressed the prevalence of rotavirus-associated diarrhea and the diversity of circulating electropherotypes by immunochromatography and RNA electrophoresis. Stool samples were taken from 391 children (267 with diarrhea) from the lower socioeconomic stratum who sought treatment in the Hospital Infantil João Paulo II/Belo Horizonte, during 2005 and 2006. Rotavirus was detected in 79/20.2% of subjects, 64/24.0% with diarrhea and 15/12.1% with no diarrhea. The virus was strongly associated with diarrhea (p = 0.003). A total of 76/19.4% and 69/17.6% rotavirus-positive children were identified by immunochromatography and electrophoresis, respectively. Rotavirus-associated diarrhea was more frequently detected in dry months (p < 0.001) and almost exclusively in children aged up to three years. Long profile strains prevailed (54/78.3%) but a shift toward short electropherotype was identified. Despite the decrease seen in 2006, rotavirus infection is still very common in our area. Although viral RNA electrophoresis is useful as a typing method, it should not be used exclusively in the diagnosis of rotavirus infection. We confirmed a shift from long to short profile strains, as already described for other South American countries.

Estratégias de planeamento de mobilidade ciclável e avaliação da transferência modal – caso de estudo em Almada

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, perfil de Ordenamento do Território e Impactes Ambientais

Coronary Revascularization Induces a Shift From Cardiac Toward Noncardiac Mortality Without Improving Survival in Vascular Surgery Patient

OBJECTIVE: Although evidence has shown that ischemic heart disease (IHD) in vascular surgery patients has a negative impact on the prognosis after surgery, it is unclear whether directed treatment of IHD may influence cause-specific and overall mortality. The objective of this study was to determine the prognostic implication of coronary revascularization (CR) on overall and cause-specific mortality in vascular surgery patients. METHODS: Patients undergoing surgery for abdominal aortic aneurysm, carotid artery stenosis, or peripheral artery disease in a university hospital in The Netherlands between January 2003 and December 2011 were retrospectively included. Survival estimates were obtained by Kaplan-Meier and Cox regression analysis. RESULTS: A total of 1104 patients were included. Adjusted survival analyses showed that IHD significantly increased the risk of overall mortality (hazard ratio [HR], 1.50; 95% confidence interval, 1.21-1.87) and cardiovascular death (HR, 1.93; 95% confidence interval, 1.35-2.76). Compared with those without CR, patients previously undergoing CR had similar overall mortality (HR, 1.38 vs 1.62; P = .274) and cardiovascular mortality (HR, 1.83 vs 2.02; P = .656). Nonrevascularized IHD patients were more likely to die of IHD (6.9% vs 35.7%), whereas revascularized IHD patients more frequently died of cardiovascular causes unrelated to IHD (39.1% vs 64.3%; P = .018). CONCLUSIONS: This study confirms the significance of IHD for postoperative survival of vascular surgery patients. CR was associated with lower IHD-related death rates. However, it failed to provide an overall survival benefit because of an increased rate of cardiovascular mortality unrelated to IHD. Intensification of secondary prevention regimens may be required to prevent this shift toward non-IHD-related death and thereby improve life expectancy.

Influência dos tarifários de transportes colectivos na repartição modal dos transportes na AML

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, Perfil de Ordenamento do Território e Impactes Ambientais

Identificação modal e actualização de modelos de elementos finitos

Dissertação para obtenção do Grau de Mestre em Engenharia Civil - Perfil Estruturas

Identificação de dano estrutural com base em análise modal

O presente trabalho procura mostrar as potencialidades das técnicas de monitorização estrutural, de detecção, localização e caracterização de dano através de alterações dos parâmetros modais. As características dinâmicas de vibração de uma estrutura são alteradas pela presença de dano, o que, representando uma perda física, conduz à consequente perda de rigidez. Este fenómeno é responsável por modificações nas frequências naturais, deslocamentos modais e respectivas derivadas. Este trabalho apresenta a curvatura das configurações modais como possível parâmetro de controlo na identificação de dano estrutural. Neste documento encontram-se vários estudos de sensibilidade realizados em três modelos distintos (viga bi-apoiada, viga em consola e pórtico encastrado) em que se pretende avaliar a fiabilidade do método das curvaturas. Foram também desenvolvidos estudos respeitantes às alterações das frequências naturais e às alterações de dois indicadores estatísticos, o MAC e o COMAC. Com base nos resultados do método das curvaturas foi desenvolvida uma Java Applet, que constitui uma ferramenta de cálculo que permite explorar as potencialidades do método das curvaturas modais na identificação de danos em várias estruturas. Esta aplicação foi desenvolvida no compilador NetBeans IDE.

Análise modal de um edifício de paredes de alvenaria resistente

O parque habitacional em Portugal é composto por um elevado número de edifícios antigos constituídos por paredes de alvenaria resistente. Nos últimos anos tem-se constatado um interesse crescente na preservação e reutilização dessas construções, por se encontrarem frequentemente em zonas históricas privilegiadas, e com potencial interesse de exploração económica. Estes motivos têm levado à realização de intervenções estruturais nesses edifícios, com vista à reorganização dos espaços, podendo desencadear alterações no seu comportamento estrutural. O objetivo primordial deste estudo é avaliar as alterações da resposta modal de um edifício de paredes de alvenaria resistente, sujeito a uma intervenção de remoção das paredes num dos seus fogos. Para tal, realizaram-se duas campanhas experimentais de identificação modal à vibração ambiente, com o intuito de determinar as propriedades dinâmicas da estrutura, antes e após a intervenção. Procedeu-se à elaboração de um modelo de elementos finitos da estrutura recorrendo ao programa de análise de estruturas SAP2000, que permitiu efetuar também a correspondente análise numérica do problema. Foi ainda realizada uma análise ao comportamento modal do edifício, onde se identificaram diversas hipóteses que influenciam a resposta dinâmica da estrutura, tendo sido desenvolvidos alguns modelos numéricos, com o objetivo de examinar nomeadamente a influência dos edifícios adjacentes, e da interação solo-estrutura, no comportamento global do edifício analisado.

Quadrature generators based on ring oscillators and shift registers

Quadrature oscillators are key elements in modern radio frequency (RF) transceivers and very useful nowadays in wireless communications, since they can provide: low quadrature error, low phase-noise, and wide tuning range (useful to cover several bands). RC oscillators can be fully integrated without the need of external components (external high Q-inductors), optimizing area, cost, and power consumption. The conventional structure of ring oscillator offers poor frequency stability and phasenoise, low quality factor (Q), and besides being vulnerable to process, voltage and temperature (PVT) variations, its performance degrades as the frequency of operation increases. This thesis is devoted to quadrature oscillators and presents a detailed comparative study of ring oscillator and shift register (SR) approaches. It is shown that in SRs both phase-noise and phase error are reduced, while ring oscillators have the advantage of occupying less area and less consumption due to the reduced number of components in the circuit. Thus, although ring oscillators are more suitable for biomedical applications, SRs are more appropriate for wireless applications, especially when specification requirements are more stringent and demanding. The first architecture studied consists in a simple CMOS ring oscillator employing an odd number of static single-ended inverters as delay cells. Subsequently, the quadrature 4-stage ring oscillator concept is shown and post-layout simulations are presented. The 3 and 4-phase single-frequency local oscillator (LO) generators employing SRs are presented, the latter with 50% and 25% duty-cycles. The circuits operate at 600 MHz and 900 MHz, and were designed in a 130 nm standard CMOS technology with a voltage supply of 1.2 V.

Experimental and theoretical analysis of the cyclic water gas shift reactor

Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Diss., 2015