925 resultados para Medium size
Resumo:
The wave data collected on board Ins Kistna from Bay of Bengal during July to August, 1964 and January, February and April, 1965 are presented. The wave parameters are analyzed and given in a form most suitable for model testing of ships. The variation of wave height with Beaufort number is remarkable. Wave periods from 2 to 10 seconds are observed with maximum frequency in the range of 2 to 5 seconds. The heights and period obtained are compared with those obtained by previous workers for the North Atlantic region and Bay of Bengal. The influence of the wave period 2 to 5 seconds on the rolling, pitching and heaving periods of medium size vessels is also discussed.
Resumo:
The predatory behaviour of a snake-head, Channa striatus (Bloch) on Labeo rohita fingerlings was studied in the laboratory. The study was conducted with six C. striatus (120 to 210 g and 22 to 28 cm) over 24h a day for 3 weeks. Three different sizes prey of large (2.00g and 5.8cm), medium (1.30g and 4.5cm) and small (0.72g and 3.5cm) were used for the first week and then medium size prey for 2nd and 3rd weeks. All the predators preferred eating the small group of L. rohita although all three size groups of L. rohita offered were available. It was found that the prey fishes remained together aside of the aquarium from the predator. Predator first targeted a prey, drove fast towards it, the prey tried to escape from the predator's attack using a specific route and finally the predator grasped the prey on head first and then engulfed. The handling time ranged between 45 and 50 sec. The time of peak feeding was found in the morning and in the evening of day. When 2 or 3 predators were kept in one aquarium, they engaged in fighting, head on, followed by an attack on the mouth region by the dominant one, and subsequently on the pectoral fin and caudal fin of the defeating one. After 2-3 days they became habituated to remain together and did not involve themselves in fighting.
Resumo:
The collection of wild breeders of the Indian white prawn Fenneropenaeus indicus from two semi-industrial trawlers fishing in Maputo Bay is assessed for the period between August and November 1993. The daily mean catch (12-21 prawns dayˉ¹) increased until October but monthly yields were not significantly different (P>0.05). The monthly mean mortality ranged between 8% and 20% and was similar for males and females. More than 70% of the catch comprised small (grade B1: 20-39 g) and medium size (grade B2: 40-59 g) prawns. While males were exclusively of grade B1 (99%), the females were predominantly of grades B2 and B3 (60-80 g). The collection of larger breeders (grade B4: >80 g) was low and represented only 1% of total catches and a maximum of 3% of females. The net profit of breeders collection increased with size (grade) of prawns, and represented a maximum yield of 114% for grade B3. The added value of live prawns exceeded 450% of the cost to the fisherman, but decreased with size of breeders. It is considered that the semi-industrial trawling fishery operating in Maputo Bay has potential for supplying wild breeders of the Indian white prawn for aquaculture. This activity can also contribute to value adding of part of the catch traditionally destined for human consumption.
Resumo:
Pelagic resources around Sri Lanka may be categorized into three major groups: (1) the small pelagic varieties such as the sprats, halmessa, sardines (salaya, soodaya), and herrings (hurulla). (2) the medium size pelagic species such as the mackerel (kumbala and bolla), barracuda (jeela), seer Spanish mackerel (thora), frigate mackeral (alagoduwa), mackerel tuna (atawalla) and the skipjack (balaya). (3) the large size fishes such as yellow fin tuna (kelawalla), big eye tuna, marlins (koppora and gappara), sail fish (thalapath), sharks (mora) and rays (maduwa). Production levels of exploited resources are noted, and seasonal patterns and annual in their abundance are considered. On the basis of observations and estimations of the existing fisheries, and the results of experimental fishing, figures are presented of the potential yield of those species already exploited. The development of that potential depends on the development of modern techniques of pole and line fishing, application of tuna longline and shark longline, increasing the number of units of drift nets and the introduction of a bait fishery for the longline and pole line fishery. Some features upon which the successes of any venture to exploit such resources are noted, particularly those which relate to the nature of the fishing vessels used.
Resumo:
Even though the rich and variegated pelagic fishery resources of our west coast are well known much has to be done for a judicial and systematic exploitation on a commercial scale. To fill up this lacuna the present paper describes in detail a new design of 10.5 m four-equal panel mid-water trawl, its rigging and operation from a medium size vessel. Comprehensive comparative efficiency studies of this gear with a 10.5m unequal panel mid-water trawl established the superiority of the new gear. From the results based on the mouth opening, resistance and the catch it is opined that this new gear can not only be used on a commercial scale in harvesting the seasonal pelagic fishery, but also as a secondary supporting gear in shrimp fishery in places like Veraval, where there is a commercially exploitable yield of quality fishes like hilsa, pomfret, seer etc., without much modification from conventional stern trawlers.
Resumo:
The brushless doubly fed induction generator (BDFIG) has been proposed as a viable alternative in wind turbines to the commonly used doubly fed induction generator (DFIG). The BDFIG retains the benefits of the DFIG, i.e. variable speed operation with a partially rated converter, but without the use of brush gear and slip rings, thereby conferring enhanced reliability. As low voltage ride-through (LVRT) performance of the DFIG-based wind turbine is well understood, this paper aims to analyze LVRT behavior of the BDFIG-based wind turbine in a similar way. In order to achieve this goal, the equivalence between their two-axis model parameters is investigated. The variation of flux linkages, back-EMFs and currents of both types of generator are elaborated during three phase voltage dips. Moreover, the structural differences between the two generators, which lead to different equivalent parameters and hence different LVRT capabilities, are investigated. The analytical results are verified via time-domain simulations for medium size wind turbine generators as well as experimental results of a voltage dip on a prototype 250 kVA BDFIG. © 2014 Elsevier B.V.
Resumo:
The Bohai Sea was the site of the Chinese national GLOBEC programme. During the June 1997 cruises of R/V Science No.1, observations and experiments on zooplankton feeding were conducted. At five 48 h time-series stations the following observations and measurements on zooplankton were carried out: (1) diurnal vertical migration, by collecting samples at different layers every 3 h with a closing net; (2) diurnal feeding rhythms, by gut pigment analysis; and (3) ingestion rate, by both gut pigment analysis and the dilution method. A classification by body size was used to deal with the diversity of species and developmental stages of zooplankton assemblages. Samples were separated into three size groups: small (200-500 mu m), medium (500-1000 mu m) and large (> 1000 mu m). The results showed that the copepods (Calanus sinicus, Paracalanus parvus, Acartia bifilosa and Centropages mcmurrichi) performed clear diurnal vertical migrations. However, their behaviour was different at different stations. The variation in gut pigment content over the 24 h cycle showed strong diurnal feeding rhythms, particularly for the large size group. Gut pigment contents reached their daily maximum during the time from dusk to midnight (18:00-24:00). The peak value was about 10 times the minimum observed in the daytime. The in situ daily grazing rate, based on gut pigment contents and evacuation experiments, was 4.00-12.65 ng chla ind(-1) day(-1) for the small size group, 5.99-66.58 ng chla ind(-1) day(-1) for the medium size group and 31.31-237.13 ng chla ind(-1) day(-1) for the large size group. The copepods consumed only a small part (2.90-13.52%) of the phytoplankton biomass hut about 77% of the daily production. The grazing mortality rate of phytoplankton by microzooplankton (<200 mu m) measured by the dilution method ranged from 0.43 to 0.69 day(-1) The calculated daily consumption of phytoplankton biomass was 35-50%, and 85-319% of the potential production.
Resumo:
River is a major component of the global surface water and CO2 cycles. The chemistry of river waters reveals the nature of weathering on a basin-wide scale and helps us understand the exogenic cycles of elements in the continent-river-ocean system. In particular, geochemical investigation of large river gives important information on the biogeochemical cycles of the elements, chemical weathering rates, physical erosion rates and CO2 consumption during the weathering of the rocks within the drainage basin. Its importance has led to a number of detailed geochemical studies on some of the world's large and medium-size river systems. Flowing in the south of China, the Xijiang River is the second largest river in the China with respect to its discharge, after the Yangtze River. Its headwaters drain the YunGui Plateau, where altitude is approximately 2000 meters. Geologically, the carbonate rocks are widely spread in the river drainage basin, which covers an area of about 0.17xl06 km2, i.e., 39% of the whole drainage basin. This study focuses on the chemistry of the Xijiang river system and constitutes the first geochemical investigation into major and trace elements concentrations for both suspended and dissolved loads of this river and its main tributaries, and Sr isotopic composition of the dissolved load is also investigated, in order to determine both chemical weathering and mechanical erosion rates. As compared with the other large rivers of the world, the Xijiang River is characterized by higher major element concentration. The dissolved major cations average 1.17, 0.33, 0.15, and 0.04 mmol I"1 for Ca, Mg, Na, and K, respectively. The total cation concentrations (TZ+) in these rivers vary between 2.2 and 4.4 meq I'1. The high concentration of Ca and Mg, high (Ca+Mg)/(Na+K) ratio (7.9), enormous alkalinity and low dissolved SiO2/HCO3 ratio (0.05) in river waters reveal the importance of carbonate weathering and relatively weak silicate weathering over the river drainage basin. The major elements in river water, such as the alkalis and alkaline-earths, are of different origins: from rain water, silicate weathering, carbonate and evaporite weathering. A mixing model based on mass budget equation is used in this study, which allows the proportions of each element derived from the different source to be calculated. The carbonate weathering is the main source of these elements in the Xijiang drainage basin. The contribution of rainwater, especially for Na, reaches to approximately 50% in some tributaries. Dissolved elemental concentration of the river waters are corrected for rain inputs (mainly oceanic salts), the elemental concentrations derived from the different rock weathering are calculated. As a consequence, silicate, carbonate and total rock weathering rates, together with the consumption rates of atmospheric CO2 by weathering of each of these lithologies have been estimated. They provide specific chemical erosion rates varying between 5.1~17.8 t/km2/yr for silicate, 95.5~157.2 t/km2/yr for carbonate, and 100.6-169.1 t/km2/yr for total rock, respectively. CO2 consumptions by silicate and carbonate weathering approach 13><109and 270.5x10 mol/yr. Mechanical denudation rates deduced from the multi-year average of suspended load concentrations range from 92-874 t/km2/yr. The high denudation rates are mainly attributable to high relief and heavy rainfall, and acid rain is very frequent in the drainage basin, may exceed 50% and the pH value of rainwater may be <4.0, result from SO2 pollution in the atmosphere, results in the dissolution of carbonates and aluminosilicates and hence accelerates the chemical erosion rate. The compositions of minerals and elements of suspended particulate matter are also investigated. The most soluble elements (e.g. Ca, Na, Sr, Mg) are strongly depleted in the suspended phase with respect to upper continent crust, which reflects the high intensity of rock weathering in the drainage basin. Some elements (e.g. Pb, Cu, Co, Cr) show positive anomalies, Pb/Th ratios in suspended matter approach 7 times (Liu Jiang) to 10 times (Nanpan Jiang) the crustal value. The enrichment of these elements in suspended matter reflects the intensity both of anthropogenic pollution and adsorption processes onto particles. The contents of the soluble fraction of rare earth elements (REE) in the river are low, and REE mainly reside in particulate phase. In dissolved phase, the PAAS-normalized distribution patterns show significant HREE enrichment with (La/Yb) SN=0.26~0.94 and Ce depletion with (Ce/Ce*) SN=0.31-0.98, and the most pronounced negative Ce anomalies occur in rivers of high pH. In the suspended phase, the rivers have LREE-enriched patterns relative to PAAS, with (La/Yb) SN=1 -00-1 .40. The results suggest that pH is a major factor controlling both the absolute abundances of REE in solution and the fractionation of REE of dissolved phase. Ce depletion in river waters with high pH values results probably from both preferential removal of Ce onto Fe-Mn oxide coating of particles and CeC^ sedimentation. This process is known to occur in the marine environment and may also occur in high pH rivers. Positive correlations are also observed between La/Yb ratio and DOC, HCO3", PO4", suggesting that colloids and (or) adsorption processes play an important role in the control of these elements.
Resumo:
We analyze technology adoption decisions of manufacturing plants in response to government-sponsored energy audits. Overall, plants adopt about half of the recommended energy-efficiency projects. Using fixed effects logit estimation, we find that adoption rates are higher for projects with shorter paybacks, lower costs, greater annual savings, higher energy prices, and greater energy conservation. Plants are 40% more responsive to initial costs than annual savings, suggesting that subsidies may be more effective at promoting energy-efficient technologies than energy price increases. Adoption decisions imply hurdle rates of 50-100%, which is consistent with the investment criteria small and medium-size firms state they use. © 2003 Elsevier B.V. All rights reserved.
Resumo:
The growth sequence of gas-phase cholesterol clusters (Ch(N)) with up to N=36 molecules has been investigated by atomistic simulation based on an empirical force field model. The results of long annealings from high temperature show that the geometric motifs characterizing the structure of pure cholesterol crystals already appear in nanometric aggregates. In all clusters molecules tend to align along a common direction. For cluster sizes above the smallest ones, dispersion interactions among the hydrocarbon body and tails of cholesterol cooperate with hydrogen bonding to give rise to a bilayer structure. Analysis of snapshots from the annealing shows that the condensation of hydrogen bonds into a connected network of rings and chains is an important step in the self-organization of cholesterol clusters. The effect of solvation on the equilibrium properties of medium-size aggregates is investigated by short molecular dynamics simulations for the N=30 and N=40 clusters in water at near ambient conditions and in supercritical carbon dioxide at T=400 K.
Resumo:
A systematic study was undertaken to gain more insight into the mechanism of transdermal delivery of nanoencapsulated model dyes across microneedle (MN)-treated skin, a complex process not yet explored. Rhodamine B (Rh B) and fluorescein isothiocyanate (FITC) as model hydrophilic and hydrophobic small/medium-size molecules, respectively, were encapsulated in poly lactic-co-glycolic acid (PLGA) nanoparticles (NPs) and delivered through full thickness porcine skin pretreated with MN array. Permeation through MN-treated skin was affected by physicochemical characteristics of NPs and the encapsulated dyes. Dye flux was enhanced by smaller particle size, hydrophilicity, and negative zeta potential of NPs. Regarding encapsulated dyes, solubility at physiological pH and potential interaction with skin proteins proved to outweigh molecular weight as determinants of skin permeation. Data were verified using confocal laser scanning microscopy imaging. Findings coupled with the literature data are supportive of a mechanism involving influx of NPs, particularly of smaller size, deep into MN-created channels, generating depot dye-rich reservoirs. Molecular diffusion of the released dye across viable skin layers proceeds at a rate determined by its molecular characteristics. Data obtained provide mechanistic information of importance to the development of formulation strategies for more effective intradermal and transdermal MN-mediated delivery of nanoencapsulated therapeutic agents.
Resumo:
The aim of this paper is to analyse vulnerability and robustness of small and medium size enterprises (SMEs) supply chains and to consider contextual factors that might influence the success of their disturbance management: Risky product and business environment. By using an exploratory case study it is shown how these contextual factors attribute vulnerability sources, contribute to the robustness of a company’s performance and supply chain vulnerability, as well as how a company seeks to manage internal and external vulnerability sources. The exploratory case is based on a fresh food supply chain of a manufacturing SME operating in a developing market.
Case findings suggest that fresh food supply chains of a manufacturing SME in developing markets are prone to disruptions of their logistics and production processes due to ‘riskiness’ of fresh food products, the ‘riskiness’ of developing markets, as well as ‘riskiness’ of SMEs themselves. However, this does not necessarily indicate the vulnerability of an SME and its entire supply chain. Findings indicate that SMEs can be very successful in disturbance management by selective use of redesign strategies that aim to prevent or reduce the impact of disturbances. More precise, it is likely that an SME can achieve robust performance by employing preventive redesign strategies in managing disturbances that result from internal, company related vulnerability sources, while impact reduction strategies are likely to contribute to robust performance of an SME if used to manage disturbances that result from internal, supply chain related vulnerability sources, as well as external vulnerability sources.
Estudo de receptores sintéticos no reconhecimento molecular de substratos aniónicos e iões metálicos
Resumo:
O trabalho descrito insere-se no âmbito da Química Supramolecular e consistiu no desenvolvimento de receptores artificiais, na forma protonada ou complexada, para o reconhecimento molecular de substratos aniónicos derivados de ácidos carboxílicos incluindo os herbicidas PMG2-, ATCP- e 2,4-D-. Foram investigadas duas séries de aniões, uma alifática (ox2-, mal2-, suc2-, glu2-, adip2-, cit3- e cta3-) e outra aromática (bzc-, naphc-, anthc-, pyrc-, ph2-, iph2-, tph2-, btc3-, dihyac2-, 4,4-dibzc2-, 3-nitrobzc- e 4-nitrobzc-). Foram sintetizados sete novos ligandos macrocíclicos simétricos constituídos por anéis aromáticos piridina ou fenantrolina ligados por cadeias de poliaminas saturadas. O comportamento ácido-base destes macrociclos foi investigado em solução aquosa e as constantes de protonação correspondentes determinadas por métodos potenciométricos e de RMN de 1H. As propriedades de complexação destes ligandos com os iões metálicos Ni2+, Cu2+, Zn2+, Cd2+ e Pb2+ foram também estudadas por métodos potenciométricos nas mesmas condições experimentais, tendo revelado que os macrociclos de dimensão média são capazes de acomodar um ou dois iões metálicos. O complexo dinuclear de Cu(II) derivado do macrociclo com dois grupos piridina foi utilizado como receptor de aniões carboxilato originando complexos ternários. Todos os complexos foram caracterizados em solução por espectroscopias de UV/vis/IVpróx e de RMN. As espécies paramagnéticas foram também caracterizadas por espectroscopia de RPE. A formação de espécies ternárias foi ainda investigada por espectrometria de massa ESI-MS e ESI-MS/MS. As estruturas cristalinas de alguns dos complexos foram determinadas por difracção de raios-X. As formas protonadas dos macrociclos foram utilizadas como receptores de uma grande variedade de aniões carboxilato. O reconhecimento molecular entre os receptores e os substratos aniónicos foi investigado em solução por métodos potenciométricos e de espectroscopia de RMN com determinação das constantes de associação. Os agregados supramoleculares foram caracterizados no estado sólido por difracção de raios-X. Finalmente as associações supramoleculares foram estudadas em solução por métodos de dinâmica molecular com determinação dos termos entrópicos e entálpicos das energias livres de ligação. Em resumo, nesta tese apresentam-se os resultados de estudos realizados com duas famílias de macrociclos: desde a síntese dos compostos, passando por estudos em solução e finalizando com simulação molecular. Este estudo sistemático através da conjugação de metodologias complementares permitiu caracterizar ao nível macroscópico e microscópico as associações moleculares.
Resumo:
O presente trabalho foca-se na ligação das actividades inward e outward das pequenas e médias empresas do sector industrial do distrito de Aveiro. O trabalho explora as ligações inward-outward e os seus benefícios. Analisa mais em profundidade a perspectiva do importador e a sua relação com o fornecedor, visto ser uma área pouco analisada na literatura. As actividades inward como a compra de máquinas, a procura de matérias-primas criam oportunidades para construir relações mais próximas com os fornecedores estrangeiros. Para analisar esta situação, foi realizado um questionário às empresas do distrito de Aveiro.
Resumo:
The use of demand response programs enables the adequate use of resources of small and medium players, bringing high benefits to the smart grid, and increasing its efficiency. One of the difficulties to proceed with this paradigm is the lack of intelligence in the management of small and medium size players. In order to make demand response programs a feasible solution, it is essential that small and medium players have an efficient energy management and a fair optimization mechanism to decrease the consumption without heavy loss of comfort, making it acceptable for the users. This paper addresses the application of real-time pricing in a house that uses an intelligent optimization module involving artificial neural networks.