Chemical shoreline cleaning agents for oil spills : update state-of-the-art on mechanisms of action and factors influencing performance /

"EPA contract no. 68-C8-0062, Work assignment no. 3-48, SAIC project no. 01-0895-03-1000."

Mechanisms of tolerance and dependence /

Mode of access: Internet.

Mechanisms of B and T lymphocyte accumulation in tumor-draining lymph nodes

Thesis (Master's)--University of Washington, 2016-06

Making the 2004 Constitution of Afghanistan: A History and Analysis Through the Lens of Coordination and Deferral Theory

Thesis (Ph.D.)--University of Washington, 2016-06

Solidification mechanisms of unmodified and strontium-modified hypereutectic aluminium-silicon alloys

The effects of strontium on the solidi. cation mode of hypereutectic aluminium-silicon alloys have been studied. Samples were prepared from an aluminium-17wt% silicon-based alloy and strontium was added at several different concentrations. The development of the microstructure was investigated by cooling curve analysis, interrupted solidi. cation experiments and optical and scanning electron microscopy. It was found that nucleation of primary silicon is suppressed by additions of strontium. The suppressed nucleation results in supersaturation of the liquid prior to nucleation, and an increased growth rate after nucleation. As a result, the silicon crystals become less faceted and more dendritic with increasing strontium additions. Increasing the strontium concentration slightly refined the eutectic spacing and introduced a small amount of fibrous silicon. Electron back-scatter diffraction measurements were performed to determine the crystallographic relation between the primary and eutectic silicon phases. The eutectic silicon in the unmodified alloy does not have any crystallographic relationship with the primary silicon crystals. In contrast, the eutectic silicon crystals in the strontium-modified alloys often share an identical or twin relationship with nearby primary silicon crystals. The incidence of twinning within primary silicon crystals was relatively low and did not appear to increase with strontium additions.

Mechanisms of heat and mass transfer to and from single drops freely-suspended in an air stream

A specially-designed vertical wind tunnel was used to freely suspend individual liquid drops of 5 mm initial diameter to investigate drop dynamics, terminal velocity and heat and mass transfer rates. Droplets of distilled, de-ionised water, n-propanol, iso-butanol, monoethanolamine and heptane were studied over a temperature range of 50oC to 82oC. The effects of substances that may provide drop surface rigidity (e.g. surface active agents, binders and polymers) on mass transfer rates were investigated by doping distilled de-ionised water drops with sodium di-octyl sulfo-succinate surfactant. Mass transfer rates decreased with reduced drop oscillation as a result of surfactant addition, confirming the importance of droplet surface instability. Rigid naphthalene spheres and drops which formed a skin were also studied; the results confirmed the reduced transfer rates in the absence of drop fluidity. Following consideration of fundamental drop dynamics in air and experimental results from this study, a novel dimensionless group, the Oteng-Attakora, (OT), number was included in the mass transfer equation to account for droplet surface behaviour and for prediction of heat and mass transfer rates from single drops which exhibit surface instability at Re>=500. The OT number and the modified mass transfer equation are respectively: OT=(ava2/d).de1.5(d/) Sh = 2 + 0.02OT0.15Re0.88Sc0.33 Under all conditions drop terminal velocity increased linearly with the square root of drop diameter and the drag coefficient was 1. The data were correlated with a modified equation by Finlay as follows: CD=0.237.((Re/P0.13)1.55(1/We.P0.13) The relevance of the new model to practical evaporative spray processes is discussed.

Mechanisms of chemical and physical transdermal penetration enhancement

The underlying theme of this thesis is one of exploring the processes involved in the enhancement of percutaneous absorption. The development of an attenuated total reflectance Fourier-Transform infrared (ATR-FTIR) spectroscopic method to analyse diffusion of suitable topically applied compounds in membrane is described. Diffusion coefficients (D/h2) and membrane solubility (AO) for topically applied compounds were determined using a solution to Fick's second law of diffusion. This method was employed to determine the diffusional characteristics of a model permeant, 4-cyanophenol (CP), across silicone membrane as a function of formulation applied and permeant physicochemical properties. The formulations applied were able to either affect CP diffusivity and/or its membrane solubility in the membrane; such parameters partially correlated with permeant physicochemical properties in each formulation. The interplay during the diffusion process between drug, enhancer and vehicle in stratum corneum (SC) was examined. When enhancers were added to the applied formulations, CP diffusivity and solubility were significantly enhanced when compared to the neat propylene glycol (PG) application. Enhancers did not affect PG diffusivity in SC but enhancers did affect PG solubility in SC. PG diffusion closely resembled that of CP, implying that the respective transport processes were inter-related. Additionally, a synergistic effect, which increases CP diffusivity and membrane solubility in SC, was found to occur between PG and water. Using 12-azidooleic acid (AOA) as an IR active probe for oleic acid, the simultaneous penetration of CP, AOA and PG into human stratum corneum was determined. It was found that the diffusion profiles for all three permeants were similar. This indicated that the diffusion of each species through SC was closely related and most likely occurred via the same route or SC microenvironment.

CO-stabilisation mechanisms of nanoparticles and surfactants in Pickering emulsions produced by membrane emulsification

Two different membrane emulsification methods were used to study mechanisms for co-stabilisation of emulsions, by either electrostatic or steric stabilised nanoparticles with anionic, cationic or non-ionic surfactants. The experimental results demonstrated the existence of two distinct co-stabilisation mechanisms that arise from interactions of the nanoparticles and surfactant molecules. When significant interaction is not involved, independent competitive adsorption of nanoparticles and surfactant molecules occurs spontaneously to stabilise droplets in formation. The adsorption/desorption equilibrium between surfactant molecules determines the longevity of the droplet stability. When the surfactant molecule reacts with the nanoparticle surface, the resultant surface modification appears to generate faster wetting kinetics for nanoparticles at the oil/water interface and yields enhanced stabilisation. The paper discusses the implications of controlling these interactions for emulsion production membrane systems.

Análise de processos de aprendizagem do tipo bottom-up e seus resultados nas organizações

Com este estudo procurou se identificar os resultados produzidos pela aprendizagem do tipo Bottom-Up (BU) em organizações, tendo-se em vista que as variáveis Cultura Organizacional de Aprendizagem (COA), Mecanismos de Coordenação e Integração (MCI) e Liderança (LID) podem interferir na relação entre o método de aprendizagem e os resultados obtidos pela organização. Para se compreender o fenômeno, após uma pesquisa bibliográfica, foi desenvolvido um estudo multicaso pela metodologia proposta por Yin (2009). Foram pesquisadas quatro organizações atuantes em segmentos distintos, nomeadas neste estudo como \"Empresa X\" (setor farmacêutico), \"Empresa Y\" (setor alimentício/franquia), \"Empresa Z\" (indústria e comércio de calçados) e \"Empresa W\" (setor farmacêutico). Nestas empresas foram inquiridos o Diretor, o Vendedor e os responsáveis pelo setor da inovação, produção, comercial, financeiro e RH. Os respondentes foram entrevistados e preencheram um questionário, além de ter existido coleta prévia de dados secundários para maior compreensão dos fatos relacionados às empresas. Como resultado, constatou-se que nos casos analisados, aparentemente existe uma combinação entre o fator MCI e os constructos LID e COA, que possibilita a existência da aprendizagem do tipo BU. Os resultados provenientes desta combinação tendem a se manifestar em termos financeiros, competitivos e mercadológicos. A combinação do fator e os constructos não necessariamente conduzem à inovatividade da organização.

Psychological and biochemical mechanisms of schizoprenia

Schizophrenia is a disease whose physical cause is unknown despite the attempts of several research teams to discover a physical basis for it. Some success has been gained in genetic studies which indicate that schizophrenia is an inherited disability. However, since research tools are at present so sadly inadequate, the value of pursuing a genetic line of reasoning is questionable. To compensate for the lack of biochemical certainties in treating mental illness, psychological theories have been constructed to explain the schizophrenia syndrome. Normal personality is seen as the resultant of environmental and inherited influences. Involved in the formation of personality are the processes of differentiation and integration, maturation of inherited traits, and the learning processes. As personality develops. consciousness of the self, inferiority feelings, and compensatory mechanisms, and the transformation of interests into drives exert a decided influence upon personality growth. Finally, in the mature personality, an integrating philosophy of life, a large variety of interests, and the possibility of self-objectification become evident.

Distinct mechanisms of DNA repair in mycobacteria and their implications in attenuation of the pathogen growth

About a third of the human population is estimated to be infected with Mycobacterium tuberculosis. Emergence of drug resistant strains and the protracted treatment strategies have compelled the scientific community to identify newer drug targets, and to develop newer vaccines. In the host macrophages, the bacterium survives within an environment rich in reactive nitrogen and oxygen species capable of damaging its genome. Therefore, for its successful persistence in the host, the pathogen must need robust DNA repair mechanisms. Analysis of M. tuberculosis genome sequence revealed that it lacks mismatch repair pathway suggesting a greater role for other DNA repair pathways such as the nucleotide excision repair, and base excision repair pathways. In this article, we summarize the outcome of research involving these two repair pathways in mycobacteria focusing primarily on our own efforts. Our findings, using Mycobacterium smegmatis model, suggest that deficiency of various DNA repair functions in single or in combinations severely compromises their DNA repair capacity and attenuates their growth under conditions typically encountered in macrophages. (C) 2011 Elsevier Ireland Ltd. All rights reserved.

Coordination and crystallisation molecules: Their interactions affecting the dimensionality of metalloporphyrinic SCFs

Synthetic metalloporphyrin complexes are often used as analogues of natural systems, and they can be used for the preparation of new Solid Coordination Frameworks (SCFs). In this work, a series of six metalloporphyrinic compounds constructed from different meso substituted metalloporphyrins (phenyl, carboxyphenyl and sulfonatophenyl) have been structurally characterized by means of single crystal X-ray diffraction, IR spectroscopy and elemental analysis. The compounds were classified considering the dimensionality of the crystal array, referred just to coordination bonds, into 0D, 1D and 2D compounds. This way, the structural features and relationships of those crystal structures were analyzed, in order to extract conclusions not only about the dimensionality of the networks but also about possible applications of the as-obtained compounds, focusing the interest on the interactions of coordination and crystallization molecules. These interactions provide the coordination bonds and the cohesion forces which produce SCFs with different dimensionalities.

Seasonality, labor and integration of aquaculture into southern African smallhold farming systems

Fish production on Malawian smallholdings is generally limited by the quantity and quality of inputs to the pond (Brummett and Noble 1995). The timing of labor availability and other farm activities limit the amount farmers put into their ponds resulting in lower growth rates and yields. There is potential for improving production and yields through modifications of production schedules to accommodate other farming activities. Limited material and labor inputs among farming system enterprises can be better allocated by considering seasonal availability of inputs and adapting the pond and fish farming technology to the farming system. This case from Malawi demonstrates that aquaculture technology that neglects the annual cycle of events and constraints on the farm will not be easily integrated into the farming system. Focusing on technology that maximizes fish production rather than facilitation of adoption and integration has been a feature of the majority of African smallholder agriculture/aquaculture projects. Farming Systems Research (FSR) must identify niches and opportunities for system improvement for it to be worth supporting as a development intervention.