Seafood safety and quality: an analysis of the supply chain in the Sultanate of Oman

The globalization of trade in fish has created many challenges for the developing world specifically with regard to food safety and quality. International organisations have established a good basis for standards in international trade. Whilst these requirements are frequently embraced by the major importers (such as Japan, the EU and the USA), they often impose additional safety requirements and regularly identify batches which fail to meet their strict standards. Creating an effective national seafood control system which meets both the internal national needs as well the requirements for the export market can be challenging. Many countries adopt a dual system where seafood products for the major export markets are subject to tight control whilst the majority of the products (whether for the local market or for more regional trade) are less tightly controlled. With regional liberalization also occurring, deciding on appropriate controls is complex. In the Sultanate of Oman, fisheries production is one of the countries' chief sources of economic revenue after oil production and is a major source of the national food supply. In this paper the structure of the fish supply chain has been analysed and highlighted the different routes operating for the different markets. Although much of the fish are consumed within Oman, there is a major export trade to the local regional markets. Much smaller quantities meet the more stringent standards imposed by the major importing countries and exports to these are limited. The paper has considered the development of the Omani fish control system including the key legislative documents and the administrative structures that have been developed. Establishing modern controls which satisfy the demands of the major importers is possible but places additional costs on businesses. Enhanced controls such as HACCP and other management standards are required but can be difficult to justify when alternative markets do not specify these. These enhanced controls do however provide additional consumer protection and can bring benefits to local consumers. The Omani government is attempting to upgrade the system of controls and has made tremendous progress toward the implementation of HACCP and introducing enhanced management systems into its industrial sector. The existence of strengthened legislative and government support, including subsidies, has encouraged some businesses to implement HACCP. The current control systems have been reviewed and a SWOT analysis approach used to identify key factors for their future development. The study shows that seafood products in the supply chain are often exposed to lengthy handling and distribution process before reaching the consumers, a typical issue faced by many developing countries. As seafood products are often perishable, they safety is compromised if not adequately controlled. The enforcement of current food safety laws in the Sultanate of Oman is shared across various government agencies. Consequently, there is a need to harmonize all regulatory requirements, enhancing the domestic food protection and to continue to work towards a fully risk-based approach in order to compete successfully in the global market.

Molecular design of a discrete chain-folding polyimide for controlled inkjet deposition of supramolecular polymers

A supramolecular polymer based upon two complementary polymer components is formed by sequential deposition from solution in THF, using a piezoelectric drop-on-demand inkjet printer. Highly efficient cycloaddition or ‘click’ chemistry afforded a well-defined poly(ethylene glycol) featuring chain-folding diimide end groups, which possesses greatly enhanced solubility in THF relative to earlier materials featuring random diimide sequences. Blending the new polyimide with a complementary poly(ethylene glycol) system bearing pyrene end groups (which bind to the chain-folding diimide units) overcomes the limited solubility encountered previously with chain-folding polyimides in inkjet printing applications. The solution state properties of the resulting polymer blend were assessed via viscometry to confirm the presence of a supramolecular polymer before depositing the two electronically complementary polymers by inkjet printing techniques. The novel materials so produced offer an insight into ways of controlling the properties of printed materials through tuning the structure of the polymer at the (supra)molecular level.

Integration of an internet-driven supply chain for a medium-size e-commerce company

This research aimed at discovering the benefits and challenges of integration across a company's e-supply chain. The research involved a single case study of an Australian e-commerce company. In our work, we first formed a framework of benefits and challenges for e-supply chain integration, which was based on the beliefs held by management consultants. After conducting interviews with various organisational stakeholders of an e-commerce company, we found that although some of the elicited opinions matched those expressed by consultants, others provided their refinement in respect to a medium size, rapidly evolving, start-up company. We also discovered challenges, seemingly ignored by the consultants, which concerned changing market conditions and limited economies of scale perceived as seriously impeding SCM integration. Also, the ability to develop and maintain scalable and effective information systems was found to impact the capacity to integrate services across the e-supply chain. The case study's single most important contribution was to bring to our attention the importance of organisational and environmental maturity in the strategic planning of the supply chain management process.

Integrated supply chain construction ecosystem management

Agenda 21 may be considered the most significant programme of action influencing environmental policy for the Australian development and construction industry. The industry has remained one of the most rapidly expanding sectors; yet, we have seen the gradual process of exhausting natural resources and irreversible environmental degradation. Even with the introduction of numerous new environmental policies, it remains questionable as to whether real improvements have occurred across the industry. Legislative mechanisms to direct on-site environmental management appear deficient; information flows between participants along the supply chain appear to impact upon environmental management performance; and industry fragmentation remains compounded by ill-defined external, non-contractual supply chain influences that directly impact on contractual systems. Limited research has considered construction supply chain theory and environmental management particularly in reference to policy. The literature highlighted a need to develop a supply chain model which seeks to integrate chain actors and government regulators through holistic information management. The model assumes that fundamental to industry change is statutory control to mandate construction environmental management plans. However, industry change and subsequent environmental management rely upon effective information dissemination. The next stage involves model refinement, investigating barriers and enablers to widespread diffusion of such an innovative integrated environmental management system.

Jumping on the omega-3 bandwagon : distinguishing the role of long-chain and short-chain omega-3 fatty acids

Omega-3 long-chain polyunsaturated fatty acids (n-3 LC-PUFA) are almost unanimously recognized for their health benefits, while only limited evidence of any health benefit is currently available specifically for the main precursor of these fatty acids, namely α-linolenic acid (ALA, 18:3n-3). However, both the n-3 LC-PUFA and the short-chain C18 PUFA (i.e., ALA) are commonly referred to as “omega-3” fatty acids, and it is difficult for consumers to recognize this difference. A current gap of many food labelling legislations worldwide allow products containing only ALA and without n-3 LC-PUFA to be marketed as “omega-3 source” and this misleading information can negatively impact the ability of consumers to choose more healthy diets. Within the context of the documented nutritional and health promoting roles of omega-3 fatty acids, we briefly review the different metabolic fates of dietary ALA and n-3 LC-PUFA. We also review food sources rich in n-3 LC-PUFA, some characteristics of LC-PUFA and current industry and regulatory trends. A further objective is to present a case for regulatory bodies to clearly distinguish food products containing only ALA from foods containing n-3 LC-PUFA. Such information, when available, would then avoid misleading information and empower consumers to make a more informed choice in their food purchasing behavior.

Up-regulated Desaturase and Elongase Gene Expression Promoted Accumulation of Polyunsaturated Fatty Acid (PUFA) but Not Long-Chain PUFA in Lates calcarifer, a Tropical Euryhaline Fish, Fed a Stearidonic Acid- and γ-Linoleic Acid-Enriched Diet

The limited activity of Δ6 fatty acid desaturase (FAD6) on α-linolenic (ALA, 18:3n-3) and linoleic (LA, 18:2n-6) acids in marine fish alters the long-chain (≥C₂₀) polyunsaturated fatty acid (LC-PUFA) concentration in fish muscle and liver when vegetable oils replace fish oil (FO) in aquafeeds. Echium oil (EO), rich in stearidonic acid (SDA, 18:4n-3) and γ-linoleic acid (GLA, 18:3n-6), may enhance the biosynthesis of n-3 and n-6 LC-PUFA by bypassing the rate-limiting FAD6 step. Nutritional and environmental modulation of the mechanisms in LC-PUFA biosynthesis was examined in barramundi, Lates calcarifer, a tropical euryhaline fish. Juveniles were maintained in either freshwater or seawater and fed different dietary LC-PUFA precursors present in EO or rapeseed oil (RO) and compared with FO. After 8 weeks, growth of fish fed EO was slower compared to the FO and RO treatments. Irrespective of salinity, expression of the FAD6 and elongase was up-regulated in fish fed EO and RO diets, but did not lead to significant accumulation of LC-PUFA in the neutral lipid of fish tissues as occurred in the FO treatment. However, significant concentrations of eicosapentaenoic acid (EPA, 20:5n-3) and arachidonic acid (ARA, 20:4n-6), but not docosahexaenoic acid (DHA, 22:6n-3), appeared in liver and, to a lesser extent, in muscle of fish fed EO with marked increases in the phospholipid fraction. Fish in the EO treatment had higher EPA and ARA in their liver phospholipids than fish fed FO. Endogenous conversion of dietary precursors into neutral lipid LC-PUFA appears to be limited by factors other than the initial rate-limiting step. In contrast, phospholipid LC-PUFA had higher biosynthesis, or selective retention, in barramundi fed EO rather than RO.

A marginalised Markov Chain Monte Carlo approach for model based analysis of EEG data

The work presented in this paper focuses on fitting of a neural mass model to EEG data. Neurophysiology inspired mathematical models were developed for simulating brain's electrical activity imaged through Electroencephalography (EEG) more than three decades ago. At the present well informative models which even describe the functional integration of cortical regions also exists. However, a very limited amount of work is reported in literature on the subject of model fitting to actual EEG data. Here, we present a Bayesian approach for parameter estimation of the EEG model via a marginalized Markov Chain Monte Carlo (MCMC) approach.

Developing an analytical framework to assess the uncertainty and flexibility mismatches across the supply chain

Purpose: The purpose of this paper is to discuss how decisions regarding organisational flexibility can be improved through targeted resource allocation, by focusing on the supply chain's level of uncertainty exposure. Specifically, the issue of where and in what ways flexibility has been incorporated across the organisation's supply chain is addressed. Design/methodology/approach: A two-phase methodology design based on literature review and case study was used. Using 83 journal articles in the areas of uncertainty and flexibility an analytical process for assessing uncertainty-flexibility mismatches was developed. Furthermore, results from ten interviews with senior/middle managers within the Australian manufacturing sector were used to provide preliminary insights on the usefulness and importance of the analytical process and its relationship with organisational practice. Findings: The paper emphasises the importance of having a systematic and encompassing view of uncertainty-flexibility mismatches across the supply chain, as well as the significance of socio-technical engagement. The paper both conceptually and empirically illustrates how, using a structured analytical process, flexibility requirements across the supply, process, control and demand segments of a supply chain might be assessed. A four-step analytical process was accordingly developed and, its application, usefulness and importance discussed using empirical data. Practical implications: The analytical process presented in this paper can assist managers to obtain a comprehensive overview of supply chain flexibility when dealing with situations involving uncertainty. This can facilitate and improve their decision-making with respect to prioritising attention on identified flexibility gaps in order to ensure stability of their performance. Originality/value: The paper presents a supply chain-wide discussion on the difficulties that uncertainty brings to organisations, and how organisational flexibility might serve to moderate those challenges for supply chain management. It discusses how to identify the flexibility gap and proposes an original analytical process for systematic assessment of uncertainty-flexibility mismatches. © Emerald Group Publishing Limited.

Uncoupling EPA and DHA in fish nutrition: dietary demand is limited in atlantic salmon and effectively met by DHA alone

Due to the scarcity of marine fish oil resources, the aquaculture industry is developing more efficient strategies for the utilization of dietary omega-3 long-chain polyunsaturated fatty acids (n-3 LC-PUFA). A better understanding of how fish utilize EPA and DHA, typically provided by fish oil, is needed. However, EPA and DHA have different physiological functions, may be metabolized and incorporated into tissues differently, and may vary in terms of their importance in meeting the fatty acid requirements of fish. To address these questions, Atlantic salmon were fed experimental diets containing, as the sole added dietary lipid source, fish oil (positive control), tallow (negative control), or tallow supplemented with EPA, DHA, or both fatty acids to ~50 or 100 % of their respective levels in the positive control diet. Following 14 weeks of feeding, the negative control diet yielded optimum growth performance. Though surprising, these results support the notion that Atlantic salmon requirements for n-3 LC-PUFA are quite low. EPA was largely β-oxidized and inefficiently deposited in tissues, and increasing dietary levels were associated with potential negative effects on growth. Conversely, DHA was completely spared from catabolism and very efficiently deposited into flesh. EPA bioconversion to DHA was largely influenced by substrate availability, with the presence of preformed DHA having little inhibitory effect. These results clearly indicate EPA and DHA are metabolized differently by Atlantic salmon, and suggest that the n-3 LC-PUFA dietary requirements of Atlantic salmon may be lower than reported and different, if originating primarily from EPA or DHA.

E-business innovation and customs renovation for secure supply chain management

Includes bibliography

The Mexican film industry and its participation in the global value chain

Includes bibliography

Measuring supply chain management practices

Purpose: This paper aims to perform an empirical investigation about the constructs and indicators of the supply chain management practices framework. Design/methodology/approach: The measuring framework proposed is based on a survey that was carried out on 107 Brazilian companies. Statistical techniques were employed to verify, validate, and test the reliability of the constructs and their indicators. To validate this framework principal component analysis and structural equation modeling techniques were used. Findings: In general, previous studies suggest six constructs for measuring the supply chain management practices framework. However, in this study a framework was achieved with four constructs of supply chain management practices, namely, supply chain (SC) integration for production planning and control (PPC) support, information sharing about products and targeting strategies, strategic relationship with customer and supplier, and support customer order. This framework has adequate levels of validity and reliability. Research limitations/implications: The main limitation of this study was that only a small sample of companies in a single sector and country were surveyed, and therefore there needs to be further research considering the special conditions in other countries. Originality/value: This study investigated statistically set indicators to discuss the topic supply chain management practices. The framework obtained has good quality of validity and reliability indicators. Thus, an alternative framework has been added to measure supply chain management practices, which is currently a popular topic in the supply chain mainstream literature. Both defined constructs and the validated indicators can be used in other studies on supply chain management. © Emerald Group Publishing Limited.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

DEVELOPMENT OF AN OPTIMIZATION MODEL FOR BIOFUEL FACILITY SIZE AND LOCATION AND A SIMULATION MODEL FOR DESIGN OF A BIOFUEL SUPPLY CHAIN

A range of societal issues have been caused by fossil fuel consumption in the transportation sector in the United States (U.S.), including health related air pollution, climate change, the dependence on imported oil, and other oil related national security concerns. Biofuels production from various lignocellulosic biomass types such as wood, forest residues, and agriculture residues have the potential to replace a substantial portion of the total fossil fuel consumption. This research focuses on locating biofuel facilities and designing the biofuel supply chain to minimize the overall cost. For this purpose an integrated methodology was proposed by combining the GIS technology with simulation and optimization modeling methods. The GIS based methodology was used as a precursor for selecting biofuel facility locations by employing a series of decision factors. The resulted candidate sites for biofuel production served as inputs for simulation and optimization modeling. As a precursor to simulation or optimization modeling, the GIS-based methodology was used to preselect potential biofuel facility locations for biofuel production from forest biomass. Candidate locations were selected based on a set of evaluation criteria, including: county boundaries, a railroad transportation network, a state/federal road transportation network, water body (rivers, lakes, etc.) dispersion, city and village dispersion, a population census, biomass production, and no co-location with co-fired power plants. The simulation and optimization models were built around key supply activities including biomass harvesting/forwarding, transportation and storage. The built onsite storage served for spring breakup period where road restrictions were in place and truck transportation on certain roads was limited. Both models were evaluated using multiple performance indicators, including cost (consisting of the delivered feedstock cost, and inventory holding cost), energy consumption, and GHG emissions. The impact of energy consumption and GHG emissions were expressed in monetary terms to keep consistent with cost. Compared with the optimization model, the simulation model represents a more dynamic look at a 20-year operation by considering the impacts associated with building inventory at the biorefinery to address the limited availability of biomass feedstock during the spring breakup period. The number of trucks required per day was estimated and the inventory level all year around was tracked. Through the exchange of information across different procedures (harvesting, transportation, and biomass feedstock processing procedures), a smooth flow of biomass from harvesting areas to a biofuel facility was implemented. The optimization model was developed to address issues related to locating multiple biofuel facilities simultaneously. The size of the potential biofuel facility is set up with an upper bound of 50 MGY and a lower bound of 30 MGY. The optimization model is a static, Mathematical Programming Language (MPL)-based application which allows for sensitivity analysis by changing inputs to evaluate different scenarios. It was found that annual biofuel demand and biomass availability impacts the optimal results of biofuel facility locations and sizes.

Molecular analysis of the human $\gamma$-chain T cell receptor genes

In our studies we have focused on the issue of variability and diversity of the $\gamma$ (or $\delta)$ chain T cell receptor (TCR) genes by studying cDNA transcripts in peripheral blood mononuclear cells or $\gamma\delta$ TCR+ T cell clones. The significance of these studies lies in the better understanding of the molecular biology of the $\gamma\delta$ T cell receptor as well as in answering the question whether certain molecular forms predominate in $\gamma\delta$ T cells exhibiting specific immunologic functions. We establish that certain $\gamma$-chain TCR genes exhibit particular patterns of rearrangements in cDNA transcripts in normal individuals. V$\gamma$I subgroup were shown to preferentially rearrange to J$\gamma$2C$\gamma$2 gene segments. These preferential VJC rearrangements, may have implications regarding the potential for diversity and polymorphism of the $\gamma$-chain TCR gene. In addition, the preferential association of V$\gamma$I genes with J$\gamma$2C$\gamma$2, which encode a non-disulfide-linked $\gamma\delta$ TCR, suggests that $\gamma$ chains utilizing V$\gamma$I are predominantly expressed as non-disulfide-linked $\gamma\delta$ TCR heterodimers. The implications of this type of expression remain to be determined. We identified two alternative splicing events of the $\gamma$-chain TCR genes occurring in high frequency in all the normal individuals examined. These events may suggest additional mechanisms of regulation and control as well as diversification of $\gamma\delta$ TCR gene expression. The question whether particular forms of $\gamma$ or $\delta$-chain TCR genes are involved in HLA Class I recognition by specific $\gamma\delta$ cytotoxic T cell clones was addressed. Our results indicated that the T cell clones expressed identical $\gamma$ but distinct $\delta$-chains suggesting that the specificity for recognition of HLA-A2 or HLA-A3 may be conferred by the $\delta$-chain TCR. The issue of the degree of diversity and polymorphism of the $\delta$-chain TCR genes in a patient with a primary immunodeficiency (Omenn's syndrome) was addressed. A limited pattern of rearrangements in peripheral blood transcripts was found, suggesting that a limited $\gamma\delta$ TCR repertoire may be expressed in this particular primary immunodeficiency syndrome. Overall, our findings suggest that $\delta$-chain TCR genes exhibit the potential for significant diversity and that there are certain preferential patterns of expression that may be associated with particular immunologic functions. ^