Reduced in vitro immune response on titania nanotube arrays compared to titanium surface

Material surfaces that provide biomimetic cues, such as nanoscale architectures, have been shown to alter cell/biomaterial interactions. Recent studies have identified titania nanotube arrays as strong candidates for use in interfaces on implantable devices due to their ability to elicit improved cellular functionality. However, limited information exists regarding the immune response of nanotube arrays. Thus, in this study, we have investigated the short- and long-term immune cell reaction of titania nanotube arrays. Whole blood lysate (containing leukocytes, thrombocytes and trace amounts of erythrocytes), isolated from human blood, were cultured on titania nanotube arrays and biomedical grade titanium (as a control) for 2 hours and 2 and 7 days. In order to determine the in vitro immune response on titania nanotube arrays, immune cell functionality was evaluated by cellular viability, adhesion, proliferation, morphology, cytokine/chemokine expression, with and without lipopolysaccharide (LPS), and nitric oxide release. The results presented in this study indicate a decrease in short- and long-term monocyte, macrophage and neutrophil functionality on titania nanotube arrays as compared to the control substrate. This work shows a reduced stimulation of the immune response on titania nanotube arrays, identifying this specific nanoarchitecture as a potentially optimal interface for implantable biomedical devices. © 2013 The Royal Society of Chemistry.

Formation of titania nanotube arrays by anodisation: DOE approach

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structural study of copper oxide supported on a ceria-modified titania catalyst system

A structural study of CuO supported on a CeO2-TiO2 system was undertaken using X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) techniques. The results of XRD revealed the presence of only two phases, TiO2 anatase and CeO2 cerianite. A trend towards smaller TiO2 crystallites was observed when cerium content increased. When the amount of cerium increased, Ti K-edge XANES analysis showed an increasing distortion of Ti sites. The results of Ce LIII-edge EXAFS showed that Ce atoms are coordinated by eight oxygen atoms at 2.32 Å. For the sample containing a small amount of cerium, the EXAFS analysis indicated that the local structure around Ce atoms was highly distorted. The catalysts presented quite different Cu K-edge XANES spectra compared to the spectra of the CuO and Cu2O reference compounds. The Cu-O mean bond length was close to that of the CuO and the Cu atoms in the catalysts are surrounded by approximately four oxygen atoms in their first shell. Copper supported on the ceria-modified titania support catalysts displayed a better performance in the methanol dehydrogenation when compared to copper supported only on titania or on ceria. © 2002 Plenum Publishing Corporation.

Raman and XRD study on brookite-anatase coexistence in cathodic electrosynthesized titania

Among the many methods developed for the synthesis of titanium dioxide, cathodic electrosynthesis has not received much attention because the resulting amorphous oxy-hydroxide matrix demands a further thermal annealing step to be transformed into crystalline titania. However, the possibility of filling deep recessed templates by the control of the solidliquid interface makes it a potentially suitable technique for the fabrication of porous scaffolds for photovoltaics and photocatalysis. Furthermore, a careful control of the crystallization process enables the growth of larger grains with lower density of grain boundaries, which act as electron traps that slow down electronic transport and promote charge recombination. In this report, well crystallized titania deposits were obtained by thermal annealing of amorphous deposits fabricated by cathodically assisted electrosynthesis on indium-tin oxide (ITO)substrates. The combined use of Raman spectroscopy and X-ray diffraction showed that the crystallization process is more intricate than previously assumed. It is shown that the amorphous matrix evolves into a rutile-free mixture of brookite and anatase at temperatures as low as 200 degrees C that persists up to 800 degrees C, when pure anatase dominates. The amount of brookite in the brookiteanatase mixture reaches a maximum at 400 degrees C. This very simple method for obtaining a brookiteanatase mixture and the ability to tune their proportions by thermal annealing is a promising alternative whose potential for solar cells and photocatalysis deserves a careful evaluation. Copyright (C) 2011 John Wiley & Sons, Ltd.

Morphology and topography analysis of mesoporous titania templated by micrometric latex sphere arrays

In this work, mesoporous titania is prepared by templating latex sphere arrays with four different sphere diameters at the micrometric scale (phi > 1 mu m). The mesoporous titania homogeneously covers the latex spheres and substrate, forming a thin coating characterized by N-2 adsorption isotherm, small angle X-rays scattering, atomic force, field emission and transmission electronic microscopies. Mesoporous titania has been templated into different shapes such as hollow particles and monoliths according to the amount of sol used to fill the voids of the close packed latex spheres. Titania topography strongly depends on the adsorption of polymeric segments over latex spheres surface, which could be decreased by changing the dimensions of latex spheres (phi = 9.5 mu m) generating a lamellar architecture. Thus, micrometric latex sphere arrays can be used to achieve new surface patterns for mesoporous materials via a fast and inexpensive chemical route for construction of functional devices in different technological fields such as energy conversion, inclusion chemistry and biomaterials. (C) 2011 Elsevier Inc. All rights reserved.

Photo-induced electron transfer in supramolecular materials of titania nanostructures and cytochrome c

In the present paper, we report on the molecular interaction and photochemistry of TiO2 nanoparticles (NPs) and cytochrome c systems for understanding the effects of supramolecular organization and electron transfer by using two TiO2 structures: P25 TiO2 NPs and titanate nanotubes. The adsorption and reduction of cytochrome c heme iron promoted by photo-excited TiO2, arranged as P25 TiO2 NPs and as nanotubes, were characterized using electronic absorption spectroscopy, thermogravimetric analysis, and atomic force microscopy. In an aqueous buffered suspension (pH 8.0), the mass of cytochrome c adsorbed on the P25 TiO2 NP surface was 2.3 fold lower (0.75 mu g m(-2)) than that adsorbed on the titanate nanotubes (1.75 mu g m(-2)). Probably due to the high coverage of titanate nanotubes by adsorbed cytochrome c, the low amount of soluble remaining protein was not as efficiently photo-reduced by this nanostructure as it was by the P25 TiO2 NPs. Cytochrome c, which desorbed from both titanium materials, did not exhibit changes in its redox properties. In the presence of the TiO2 NPs, the photo-induced electron transfer from water to soluble cytochrome c heme iron was corroborated by the following findings: (i) identification by EPR of the hydroxyl radical production during the irradiation of an aqueous suspension of TiO2 NPs, (ii) impairment of a cytochrome c reduction by photo-excited TiO2 in the presence of dioxane, which affects the dielectric constant of the water, and (iii) change in the rate of TiO2-promoted cytochrome c reduction when water was replaced with D2O. The TiO2-promoted photo-reduction of cytochrome c was reverted by peroxides. Cytochrome c incorporated in the titanate nanotubes was also reversibly reduced under irradiation, as confirmed by EPR and UV-visible spectroscopy.

Materiali utilizzati a lezione nel corso di Teoria della letteratura (LS) "Homo narrator: Per una teoria del sapere narrativo"

I materiali forniti sono specificamente rivolti agli studenti che abbiano frequentato il corso, come integrazione e supporto agli appunti presi durante le lezioni.

La matematica fuzzy nell'ingegneria dei materiali. Applicazioni alla durevolezza e alla conservazione dei materiali in opera nei siti archeologici

La ricerca presentata è un’ampia esplorazione delle possibili applicazioni di concetti, metodi e procedure della Fuzzy Logic all’Ingegneria dei Materiali. Tale nuovo approccio è giustificato dalla inadeguatezza dei risultati conseguiti con i soli metodi tradizionali riguardo alla reologia ed alla durabilità, all’utilizzo di dati di laboratorio nella progettazione e alla necessità di usare un linguaggio (informatizzabile) che consenta una valutazione congiunta degli aspetti tecnici, culturali, economici, paesaggistici della progettazione. – In particolare, la Fuzzy Logic permette di affrontare in modo razionale l’aleatorietà delle variabili e dei dati che, nel settore specifico dei materiali in opera nel costruito dei Beni Culturali, non possono essere trattati con i metodi statistici ordinari. – La scelta di concentrare l’attenzione su materiali e strutture in opera in siti archeologici discende non solo dall’interesse culturale ed economico connesso ai sempre più numerosi interventi in questo nuovo settore di pertinenza dell’Ingegneria dei Materiali, ma anche dal fatto che, in tali contesti, i termini della rappresentatività dei campionamenti, della complessità delle interazioni tra le variabili (fisiche e non), del tempo e quindi della durabilità sono evidenti ed esasperati. – Nell’ambito di questa ricerca si è anche condotto un ampio lavoro sperimentale di laboratorio per l’acquisizione dei dati utilizzati nelle procedure di modellazione fuzzy (fuzzy modeling). In tali situazioni si è operato secondo protocolli sperimentali standard: acquisizione della composizione mineralogica tramite diffrazione di raggi X (XRD), definizione della tessitura microstrutturale con osservazioni microscopiche (OM, SEM) e porosimetria tramite intrusione forzata di mercurio (MIP), determinazioni fisiche quali la velocità di propagazione degli ultrasuoni e rotoviscosimetria, misure tecnologiche di resistenza meccanica a compressione uniassiale, lavorabilità, ecc. – Nell’elaborazione dei dati e nella modellazione in termini fuzzy, la ricerca è articolata su tre livelli: a. quello dei singoli fenomeni chimico-fisici, di natura complessa, che non hanno trovato, a tutt’oggi, una trattazione soddisfacente e di generale consenso; le applicazioni riguardano la reologia delle dispersioni ad alto tenore di solido in acqua (calci, cementi, malte, calcestruzzi SCC), la correlazione della resistenza a compressione, la gelività dei materiali porosi ed alcuni aspetti della durabilità del calcestruzzo armato; b. quello della modellazione della durabilità dei materiali alla scala del sito archeologico; le applicazioni presentate riguardano i centri di cultura nuragica di Su Monte-Sorradile, GennaMaria-Villanovaforru e Is Paras-Isili; c. quello della scelta strategica costituita dalla selezione del miglior progetto di conservazione considerando gli aspetti connessi all’Ingegneria dei Materiali congiuntamente a quelli culturali, paesaggistici ed economici; le applicazioni hanno riguardato due importanti monumenti (Anfiteatro e Terme a Mare) del sito Romano di Nora-Pula.