Importancia de la musculatura supra e infrahioidea en la biomec??nica mandibular

Resumen basado en el de la publicaci??n

Maxillary complete denture movement during chewing in mandibular removable partial denture wearers

To evaluate the pattern of maxillary complete denture movement during chewing for free-end removable partial dentures (RPD) wearers, compared to maxillary and mandibular complete denture wearers. Eighteen edentulous participants (group I) and 10 volunteers with bilateral posterior edentulous mandibles (group II) comprised the sample. Measures of mean denture movement and its variability were obtained by a kinesiographic instrument K6-I Diagnostic System, during the mastication of bread and a polysulphide block. Data were analysed using two-way anova (alpha = 0.05). Upper movement during chewing was significantly lower for group II, regardless of the test food. The test food did not influence the vertical or lateral position of the denture bases, but more anterior dislocation was found when polysulphide blocks were chewed. Group II presented lower intra-individual variability for the vertical axis. Vertical displacement was also more precise with bread as a test food. It can be concluded that mandibular free-end RPD wearers show smaller and more precise movements than mandibular complete denture wearers.

A retrospective study of mandibular fracture in a 40-month period

This retrospective study evaluated the epidemiology, treatment and complications of mandibular fracture associated, or not associated, with other facial fractures, when the influence of the surgeon`s skill and preference for ally rigid internal fixation (RIF) system devices was minimized. The files of 700 patients with facial trauma were available, and 126 files were chosen for review. Data were collected regarding gender, age, race, date of trauma, date of surgery, addictions, etiology, signs and symptoms, fracture area, complications, treatment performed, date of hospital discharge.. and medication. 126 patients suffered mandibular fractures associated, or not, with other maxillofacial fractures, and a total of 201 mandibular fractures were found. The incidence of mandibular fractures was more prevalent in males, in Caucasians and during the third decade of life. The most common site was the condyle, followed by the mandibular body. The therapy applied was effective in handling this type of fracture and the Success rates were comparable with other published data.

A Prospective Follow-up Study of 44 Mandibular Immediately Loaded Implants Using Resonance Frequency Analysis: Preliminary 1-Year Results

Purpose: This clinical study aimed to evaluate initial, 4-months, and 1-year stability of immediately loaded dental implants inserted according to a protocol of lower rehabilitation with prefabricated bars. Materials and Methods: The sample was composed of 11 edentulous patients. In each patient, 4 interforaminal implants were inserted. Immediately after implant installation, resonance frequency analysis (RFA) for each fixation was registered as well as after 4 months and 1 year with the prosthetic bar removed as it is a screwed system. Results: The clinical implant survival rate was 100%. The RFA showed an increase in stability after 4 months from 64.09 +/- 648 to 64.31 +/- 4.96 and I year, 67.11 +/- 4.37. The analysis of variance showed a statistically significant result (P = 0.015) among implant stability quotient values for the different periods evaluated. Tukey test results showed statistically significant differences between 1-year results and the initial periods but there was no statistically significant difference between initial and 4-month results (P > 0.05). Conclusion: These preliminary 1-year results indicate that immediate loading of mandibular dental implants using the studied prefabricated bars protocol is a reliable treatment as it is in accordance with the results described in the literature for other similar techniques. (Implant Dent 2009; 18:530-538)

Evaluation of in vitro resistance of titanium and resorbable (poly-L-DL-lactic acid) fixation systems on the mandibular angle fracture

The purpose of this study was to compare, by mechanical in vitro testing, a 2.0-mm system made with poly-L-DL-lactide acid with an analogue titanium-based system. Mandible replicas were used as a substrate and uniformly sectioned on the left mandibular angle. The 4-hole plates were adapted and stabilized passively in the same site in both groups using four screws, 6.0 mm long. During the resistance-to-load test, the force was applied perpendicular to the occlusal plane at three different points: first molar at the plated side; first molar at the contralateral side; and between the central incisors. At 1 mm of displacement, no statistically significant difference was found. At 2 mm displacement, a statistically significant difference was observed when an unfavourable fracture was simulated and the load was applied in the contralateral first molar and when a favourable fracture was simulated and the load was applied between the central incisors. At the failure displacement, a statistically significant difference was observed only when the favourable fracture was simulated and the load was applied on the first molar at the plated side. In conclusion, despite more failure, the poly-L-DL-lactic acid-based system was effective.

Forebrain projections to brainstem nuclei involved in the control of mandibular movements in rats

Mandibular movements occur through the triggering of trigeminal motoneurons. Aberrant movements by orofacial muscles are characteristic of orofacial motor disorders, such as nocturnal bruxism (clenching or grinding of the dentition during sleep). Previous studies have suggested that autonomic changes occur during bruxism episodes. Although it is known that emotional responses increase jaw movement, the brain pathways linking forebrain limbic nuclei and the trigeminal motor nucleus remain unclear. Here we show that neurons in the lateral hypothalamic area, in the central nucleus of the amygdala, and in the parasubthalamic nucleus, project to the trigeminal motor nucleus or to reticular regions around the motor nucleus (Regio h) and in the mesencephalic trigeminal nucleus. We observed orexin co-expression in neurons projecting from the lateral hypothalamic area to the trigeminal motor nucleus. In the central nucleus of the amygdala, neurons projecting to the trigeminal motor nucleus are innervated by corticotrophin-releasing factor immunoreactive fibers. We also observed that the mesencephalic trigeminal nucleus receives dense innervation from orexin and corticotrophin-releasing factor immunoreactive fibers. Therefore, forebrain nuclei related to autonomic control and stress responses might influence the activity of trigeminal motor neurons and consequently play a role in the physiopathology of nocturnal bruxism.

Major gene and multifactorial inheritance of mandibular prognathism

Mandibular prognathism typically shows familial aggregation. Various genetic models have been described and it is assumed to be a multifactorial and polygenic trait, with a threshold for expression. Our goal was to examine specific genetic models of the familial transmission of this trait. The study sample comprised of 2,562 individuals from 55 families. Complete family histories for each proband were ascertained and the affection status of relatives were confirmed by lateral cephalograms, photographs, and dental models. Pedigrees were drawn using PELICAN and complex segregation analysis was performed using POINTER. Parts of some pedigrees were excluded to create one founder pedigrees, so the total N was 2,050. Analysis showed more affected females than males (P = 0.030). The majority of the pedigrees suggest autosomal dominant inheritance. Incomplete penetrance was demonstrated by the ratio of affected/unaffected parents and siblings. The heritability of mandibular prognathism was estimated to be 0.316. We conclude that there is a major gene that influences the expression of mandibular prognathism with clear signs of Mendelian inheritance and a multifactorial component. (C) 2007 Wiley-Liss, Inc.

Medição de deslocamento através de sensores magnetoresistivos aplicada ao movimento mandibular

Neste trabalho é apresentado um método para medição de deslocamentos sem contato, utilizando sensores magnetoresistivos, os quais são sensibilizados pela variação do campo magnético produzido por um imã permanente em deslocamento no espaço. Os sensores magnetoresistivos possuem, internamente, uma ponte de Wheathestone, onde a resistência varia conforme varia o campo magnético, de modo que o circuito mais indicado para este caso é um amplificador e um filtro para cada sensor. O principal objetivo do trabalho é a obtenção de uma técnica para medir deslocamentos sem contato, e estender os resultados para medida de movimentos mandibulares. A montagem consiste de duas placas de celeron, distantes 30mm uma da outra e unidas por parafusos de polietileno. Em cada uma destas placas foram dispostos quatro sensores, num total de oito, sendo que para cada um deles existe um circuito de amplificação e filtragem do sinal de saída. Sob uma chapa de alumínio foi fixado este equipamento e uma mesa de calibração em 3D, a qual, após a obtenção da matriz de calibração, foi substituída por um emulador de movimento mandibular. Os parâmetros do modelo foram estimados através do método dos mínimos quadrados com auxílio do software Matlab, Release 12. Este software também foi utilizado para o sistema de aquisição de dados durante a realização dos experimentos. A imprecisão dos resultados obtidos na determinação dos deslocamentos, está na ordem de décimos de milímetros. O trabalho apresenta, também, o mapeamento do campo magnético do magneto utilizado nos experimentos através do software FEM2000 – Método de elementos finitos aplicado ao eletromagnetismo.

Estudo comparativo em radiografias panorâmicas do grau de inclinação dos terceiros molares inferiores e da direção de crescimento mandibular segundo os traçados de Altonen, Haavikko, Mattila e de Puricelli

Foi realizado um estudo comparativo entre os resultados das medidas obtidas segundo dois traçados (Altonen, Haavikko e Mattila x Puricelli), efetuadas sobre radiografias panorâmicas, verificando-se a presença ou ausência de compatibilidade entre os mesmos. Avaliou-se também a direção de crescimento mandibular (vertical ou sagital) na amostra composta por pacientes com maloclusão de Classe II esquelética e ainda a existência de uma relação desta direção com o grau de inclinação dos terceiros molares. Desta forma, as seguintes medidas foram comparadas: ângulo β de Altonen, Haavikko e Mattila correspondente ao γ de Puricelli, o qual indicou o relacionamento dos terceiros molares inferiores em relação aos segundos molares; ângulo γA de Altonen, Haavikko e Mattila correspondente ao M2L3 de Puricelli, o qual indicou o ângulo de inclinação do segundo molar com uma linha de base e ângulo α de Altonen, Haavikko e Mattila correspondente ao Pc-Go-B de Puricelli, proporcionando o ângulo mandibular. Baseando-se nos resultados obtidos, apresentados e discutidos no presente trabalho e de acordo com a metodologia estudada, pode-se concluir que: 1) Os traçados diferem entre si, com relação a todas as medidas. Entretanto, apresentam uma correlação positiva para todas as medidas estudadas. 2) Há um crescimento mandibular predominantemente vertical (condilar) segundo o traçado proposto por Puricelli. 3) O grau de inclinação do terceiro molar não se correlaciona com a direção do crescimento mandibular indicada através do ângulo mandibular em ambos os traçados. Desta forma, é imprescindível que ao se compararem os resultados de diferentes estudos analisem-se apenas aqueles que utilizaram o mesmo traçado.

Estenose da fossa intercondilar após estabilização articular com retalho de fáscia lata em cães

Determinaram-se os índices de largura da fossa intercondilar (FI), após transecção do ligamento cruzado cranial em nove cães adultos submetidos à estabilização articular com retalho de fáscia lata. Os joelhos foram alocados em dois grupos, sendo o joelho direito (GI) submetido à incisuroplastia troclear (ITR) e posterior estabilização articular, e o joelho esquerdo submetido somente à substituição ligamentar (GC). Cada grupo foi dividido em três subgrupos correspondentes aos momentos de eutanásia aos 30, 90 e 180 dias de pós-operatório. Os índices de largura da FI foram determinados, macroscópica e radiograficamente, pela mensuração da abertura cranial da FI nos terços cranial, médio e caudal, e indexados em relação à largura epicondilar. Observou-se aumento significativo dos índices macroscópicos e radiográficos nas articulações do GI, sendo estes estatisticamente diferentes daqueles das articulações de GC. Não foi observada estenose intercondilar nos joelhos de GC após a estabilização articular. Conclui-se que a estabilização articular com retalho de fáscia lata preveniu a estenose da fossa intercondilar, e que a ITR promoveu o alargamento permanente dessa estrutura.

Effect of abutment's height and framework alloy on the load distribution of mandibular cantilevered implant-supported prosthesis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of cantilever length and framework alloy on the stress distribution of mandibular-cantilevered implant-supported prostheses

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Investigação da capacidade intelectiva de pacientes pediátricos diagnosticados com tumores de fossa posterior

Central Nervous System are the most common pediatric solid tumors. 60% of these tumors arise in posterior fossa, mainly in cerebellum. The first therapeutic approach is surgical resection. Malignant tumors require additional strategies - chemotherapy and radiotherapy. The increasing survival evidences that childhood brain tumors result in academic and social difficulties that compromise the quality of life of the patients. This study investigated the intellectual functioning of children between 7 to 15 years diagnosed with posterior fossa tumors and treated at CEHOPE - Recife / PE. 21 children were eligible - including 13 children with pilocytic astrocytoma (G1) who underwent only surgery resection, and eight children with medulloblastoma (G2) - submitted to surgical resection, chemotherapy and craniospinal radiotherapy. Participants were evaluated by the Wechsler Intelligence Scale for Children - WISC-III. Children of G1 scored better than children of G2. Inferential tools (Mann-Whitney Ü Test) identified significant diferences (p ≤ 0.05) between the Performance IQ (PIQ) and Processing Speed Index (PSI) as a function of treatment modality; Full Scale IQ (FSIQ), PIQ and PSI as a function of parental educational level; PIQ, FSIQ, IVP and Freedom from Distractibility (FDI) as a function of time between diagnosis and evaluation. These results showed the late and progressive impact of radiotherapy on white matter and information processing speed. Furthermore, children whose parents have higher educational level showed better intellectual performance, indicating the influence of xxii socio-cultural variables on cognitive development. The impact of cancer and its treatment on cognitive development and learning should not be underestimated. These results support the need to increase the understanding of such effects in order to propose therapeutic strategies which ensure that, in addition to the cure, the full development of children with this pathology