Influence of intentional ankylosis of deciduous canines to reinforce the anchorage for maxillary protraction

Introduction: This retrospective cephalometric study analyzed the influence of intentional ankylosis of deciduous canines in patients with Class III malocclusion and anterior crossbite, in the deciduous and early mixed dentition stages, treated by orthopedic maxillary expansion followed by maxillary protraction. Methods: Lateral cephalograms of 40 patients were used, divided in 2 groups paired for age and gender. The Ankylosis Group was composed of 20 patients (10 boys and 10 girls) treated with induced ankylosis and presenting initial and final mean ages of 7 years 4 months and 8 years 3 months, respectively, with a mean period of maxillary protraction of 11 months. The Control Group comprised 20 patients (10 boys and 10 girls) treated without induced ankylosis, with initial and final mean ages of 7 years 8 months and 8 years 7 months, respectively, with a mean period of maxillary protraction of 11 months. Two-way analysis of variance and covariance analysis were applied to compare the initial and final cephalometric variables and the treatment changes between groups. Results: According to the results, the variables evidencing the significant treatment changes between groups confirmed that the intentional ankylosis enhanced the sagittal response of the apical bases (Pg-NPerp) and increased the facial convexity angles (NAP and ANB). Conclusions: The protocol involving intentional ankylosis of deciduous canines enhanced the sagittal response of the apical bases.

Stability of maxillary anterior crowding treatment

OBJECTIVE: To evaluate the stability and the relapse of maxillary anterior crowding treatment on cases with premolar extraction and evaluate the tendency of the teeth to return to their pretreatment position. METHODS: The experimental sample consisted of 70 patients of both sex with an initial Class I and Class II maloclusion and treated with first premolar extractions. The initial mean age was 13,08 years. Dental casts' measurements were obtained at three stages (pretreatment, posttreatment and posttreatment of 9 years on average) and the variables assessed were Little Irregularity Index, maxillary arch length and intercanine. Pearson correlation coefficient was used to know if some studied variable would have influence on the crowding in the three stages (LII1, LII2, LII3) and in each linear displacement of the Little irregularity index (A, B, C, D, E) in the initial and post-retention phases. RESULTS: The maxillary crowding relapse ( LII3-2) is influenced by the initial ( LII1), and the teeth tend to return to their pretreatment position. CONCLUSION: The results underline the attention that the orthodontist should be given to the maxillary anterior relapse, primarily on those teeth that are crowded before the treatment.

AVALIAÇÃO TOMOGRÁFICA DA ANGULAÇÃO DOS PRIMEIROS E SEGUNDOS MOLARES E DO ESPAÇO PARA O TERCEIRO MOLAR SUPERIOR APÓS O USO DO APARELHO FORSUS®.

A presente pesquisa avaliou a angulação mésio-distal e a distalização dos primeiros e dos segundos molares superiores permanentes em pacientes tratados com o aparelho Forsus® em conjunto com o aparelho ortodôntico fixo. A amostra foi composta por 44 teleradiografias, (22 do lado direito e 22 do lado esquerdo), obtidas por meio de 11 tomografias computadorizadas, de 11 pacientes, realizadas em dois tempos: antes (T1) e após (T2) a instalação do aparelho Forsus®, tratados na clínica de Pós-Graduação em Odontologia, área de Ortodontia, da Universidade Metodista de São Paulo. Após a obtenção dos cortes tipo telerradiografia, foi realizada a marcação dos pontos, linhas e planos, e realizada a mensuração das variáveis de interesse. Para avaliação do espaço para os terceiros molares superiores, utilizou-se uma linha referencial (linha PTVR), demarcada a partir do ponto PTV, perpendicular ao plano de Frankfurt. O espaço avaliado compreendeu entre a Linha PTVR, até a face distal do primeiro molar e do segundo superior permanente. Para avaliar o longo eixo dos primeiros e segundos molares superiores, mensurou-se o ângulo formado entre esses dentes e o plano palatino. Para auxílio das mensurações, foi utilizado o software Radiocef Studio 2. Na análise estatística usou-se o teste t pareado. Concluiu-se que houve distalização e aumento da angulação distal dos primeiros e segundos molares superiores, sendo que nos segundos molares a distalização e angulação distal da coroa ocorreram em menor quantidade; os efeitos do lado direito e esquerdo foram semelhantes; pode-se também constatar que ocorreu uma redução na probabilidade de erupção dos terceiros molares superiores.

AVALIAÇÃO DAS TÁBUAS ÓSSEAS VESTIBULARES E LINGUAIS DOS DENTES ANTERIORES INFERIORES E MOLARES SUPERIORES APÓS O TRATAMENTO COM OS APARELHOS FUNCIONAIS FIXOS FORSUS E TWIN FORCE BITE CORRECTOR

Pelo fato das consequências do uso de aparelhos ortopédicos fixos sobre o periodonto ósseo vestibular e lingual ainda serem uma incógnita para o ortodontista clínico e pesquisador, este estudo teve como objetivo avaliar, por meio de tomografia computadorizada de feixe cônico (TCFC) as alterações em espessura das tábuas ósseas vestibulares e linguais em primeiros molares superiores e incisivos e caninos inferiores, após a utilização de aparelhagem fixa e dos aparelhos Twin Force (grupo A) e Forsus (grupo B) para o tratamento da maloclusão de Classe II, 1ª divisão. Para tanto, obteve-se uma amostra de 22 pacientes jovens adultos, divididos em dois grupos, de acordo com o aparelho propulsor da mandíbula. Grupo experimental A: 11 pacientes, 6 masculinos e 5 femininos, com idade média de 15,09 anos na instalação do Twin Force, e 11 pacientes, 7 masculinos e 4 femininos, com idade média de 15,45 anos na instalação do Forsus. O tempo médio de uso do aparelho Twin Force foi de 3,73 meses e do Forsus, 7,09 meses. O grupo A realizou TCFC antes do início do tratamento (T1), antes da instalação do Twin Force (T2), após a remoção do Twin Force (T3); e o grupo B somente antes da instalação do Forsus (T2) e após a remoção do Forsus (T3). Para comparação entre os tempos T2 e T3 foi utilizado o teste t pareado e entre os tempos T1, T2 e T3 foi utilizada a Análise de Variância (ANOVA) a um critério e o teste post-hoc de Tukey. Para comparação entre os grupos foi utilizado o teste t . Na comparação intergrupos os resultados evidenciaram que não houve diferença estatisticamente significante entre as alterações das espessuras das tábuas ósseas vestibular e lingual; por outro lado, na avaliação intra-grupo, de 48 medidas avaliadas, no grupo A houve reduções estatisticamente significantes nos terços cervical e médio por vestibular, nos dentes anteroinferiores e nos primeiros molares superiores e aumento nos terços cervical e médio, por lingual nos dentes anteriores inferiores, totalizando 25 medidas significantes. Já no grupo B, houve aumento significante da tábua óssea lingual nos dentes anteriores inferiores e redução em vestibular nos molares superiores, totalizando apenas sete medidas significantes, mas com mais medidas significantes de redução óssea vestibular em terços cervical e médio nos primeiros molares superiores, em comparação com o grupo A. Não houve diferença significante entre as medições obtidas com voxel 0,2 mm e 0,4 mm e nem dimorfismo entre os gêneros. As reduções em espessura óssea alveolar, principalmente em terços cervicais e médios vestibulares nos dentes avaliados neste estudo são um alerta ao clínico, para que realize essa abordagem diagnóstica periodontal antes de iniciar o tratamento ortodôntico.

AVALIAÇÃO DO COMPRIMENTO DA COROA CLÍNICA DOS DENTES ÂNTERO-INFERIORES EM PACIENTES TRATADOS COM APARELHO REGULADOR DE FUNÇÃO FRÄNKEL-2

O objetivo do estudo consistiu em verificar uma possível alteração no tamanho da coroa clínica dos dentes ântero-inferiores em 50 indivíduos portadores de má Oclusão de Angle Classe II. A amostra foi dividida em 2 grupos: um grupo tratado com 25 indivíduos (14 do sexo masculino e 11 do feminino) com idade média em T1 (tempo inicial do tratamento) de 11 anos (dp = 9 meses), e em T2 (tempo pós-tratamento) de 12 anos e 7 meses (dp = 7 meses), tratados com o aparelho regulador de função Fränkel-2, durante 18 meses; e, um grupo controle com 25 indivíduos (12 do sexo masculino e 13 do feminino) com idade média em T1 de 10 anos e 3 meses (dp = 11 meses) e em T2 de 12 anos e 1 mês (dp = 11 meses). Os 100 modelos em gesso dos indivíduos foram analisados e comparados em relação ao início e ao término do tratamento por meio de um paquímetro digital, utilizando-se como medida a distância da borda incisal até a porção mais côncava da margem gengival dos incisivos e caninos inferiores. Os dados foram analisados por meio do teste t de Student e teste t pareado. Dentre os seis dentes ântero-inferiores, todos apresentaram aumento significante no grupo tratado, e apenas três dentes (33,42 e 43) apresentaram aumento significante no grupo controle. Já em relação ao grupo tratado e o grupo controle em T2, houve um aumento significante da coroa nos dentes 32, 33 e 43. Houve um aumento estatisticamente significante em apenas dois dentes (31 e 41) em ambos os sexos. Os resultados não demonstraram relevância estatística quando comparados com a alteração do tamanho da coroa no decorrer da idade. Conclui-se que as medidas das coroas clínicas dos dentes diferiram entre os grupos, sendo maior no grupo tratado. O aumento da coroa clinica dos dentes, não esta relacionado somente pela presença de inclinação para vestibular dos mesmo, mas pode ser considerado como multifatorial.

Long-term skeletal and dental effects and treatment timing for functional appliances in Class II malocclusion

Objective: To analyze the long-term skeletal and dentoalveolar effects and to evaluate treatment timing of Class II treatment with functional appliances followed by fixed appliances.Materials and Methods: A group of 40 patients (22 females and 18 males) with Class II malocclusion consecutively treated either with a Bionator or an Activator followed by fixed appliances was compared with a control group of 20 subjects (9 females and 11 males) with untreated Class II malocclusion. Lateral cephalograms were available at the start of treatment (mean age 10 years), end of treatment with functional appliances (mean age 12 years), and long-term observation (mean age 18.6 years). The treated sample also was divided into two groups according to skeletal maturity. The early-treatment group was composed of 20 subjects (12 females and 8 males) treated before puberty, while the late-treatment group included 20 subjects (10 females and 10 males) treated at puberty. Statistical comparisons were performed with analysis of variance followed by Tukey's post hoc tests.Results: Significant long-term mandibular changes (Co-Gn) in the treated group (3.6 mm over the controls) were associated with improvements in the skeletal sagittal intermaxillary relationship, overjet, and molar relationship (similar to 3.0-3.5 mm). Treatment during the pubertal peak was able to produce significantly greater increases in total mandibular length (4.3 mm) and mandibular ramus height (3.1 mm) associated with a significant advancement of the bony chin (3.9 mm) when compared with treatment before puberty.Conclusion: Treatment of Class II malocclusion with functional appliances appears to be more effective at puberty. (Angle Orthod. 2013;83:334-340.)

Prospective study of dentoskeletal changes in class II division malocclusion treatment with twin force bite corrector

Objective: To evaluate the dentoskeletal changes of Class II malocclusion treatment with the Twin Force Bite Corrector (TFBC). Materials and Methods: The sample comprised 86 lateral cephalograms obtained from 43 subjects with Class II division 1 malocclusion; the subjects were divided into two groups. The experimental group comprised 23 patients with a mean initial age of 12.11 years who were treated with the TFBC for a mean period of 2.19 years. The control group included 40 lateral cephalograms from 20 Class II nontreated patients, with an initial mean age of 12.55 years and a mean observation period of 2.19 years. The lateral cephalograms were evaluated before and after orthodontic treatment in group 1 and in the beginning and end of the observation period in group 2. t-Tests were used to compare the initial and final cephalometric characteristics of the groups as well as the amount of change. Results: The experimental group presented greater maxillary growth restriction and mandibular retrusion than the control group, as well as greater maxillomandibular relationship improvement and greater labial tipping of the mandibular incisors. The results also showed a greater decrease in overbite and overjet in the experimental group, and there were no statistically significant differences in the craniofacial growth pattern between groups. Conclusions: The TFBC promotes restriction of anterior maxillary displacement without significant changes in mandibular length and position and improvement of maxillomandibular relationship without changes in facial growth and significant buccal tipping of mandibular incisors. Class II correction with the TFBC occurred primarily as a result of dentoalveolar changes.

Maxillary sinus floor extension and posterior tooth inclination in adolescent patients with Class II Division 1 malocclusion treated with maxillary first molar extractions

INTRODUCTION Our objective was to investigate potential associations between maxillary sinus floor extension and inclination of maxillary second premolars and second molars in patients with Class II Division 1 malocclusion whose orthodontic treatment included maxillary first molar extractions. METHODS The records of 37 patients (18 boys, 19 girls; mean age, 13.2 years; SD, 1.62 years) treated between 1998 and 2004 by 1 orthodontist with full Begg appliances were used in this study. Inclusion criteria were white patients with Class II Division 1 malocclusion, sagittal overjet of ≥4 mm, treatment plan including extraction of the maxillary first permanent molars, no missing teeth, and no agenesis. Maxillary posterior tooth inclination and lower maxillary sinus area in relation to the palatal plane were measured on lateral cephalograms at 3 time points: at the start and end of treatment, and on average 2.5 years posttreatment. Data were analyzed for the second premolar and second molar inclinations by using mixed linear models. RESULTS The analysis showed that the second molar inclination angle decreased by 7° after orthodontic treatment, compared with pretreatment values, and by 11.5° at the latest follow-up, compared with pretreatment. There was evidence that maxillary sinus volume was negatively correlated with second molar inclination angle; the greater the volume, the smaller the inclination angle. For premolars, inclination increased by 15.4° after orthodontic treatment compared with pretreatment, and by 8.1° at the latest follow-up compared with baseline. The volume of the maxillary sinus was not associated with premolar inclination. CONCLUSIONS We found evidence of an association between maxillary second molar inclination and surface area of the lower sinus in patients treated with maxillary first molar extractions. Clinicians who undertake such an extraction scheme in Class II patients should be aware of this potential association and consider appropriate biomechanics to control root uprighting.

Relationship between maxillary and mandibular base lengths and dental crowding in patients with complete Class II malocclusions

Objective: To verify the relationship between maxillary and mandibular effective lengths and dental crowding in patients with Class II malocclusions. Materials and Methods: The sample comprised 80 orthodontic patients with complete Class II malocclusions in the permanent dentition (47 male, 33 female) who were divided into two groups according to the amount of mandibular tooth-arch size discrepancy. The maxillary and mandibular effective lengths (Co-A and Co-Gn) and tooth-arch size discrepancies were measured on the initial cephalograms and dental casts, respectively. Intergroup comparisons of apical base lengths were performed with independent t-tests. Correlation between base length and dental crowding was examined by means of Pearson's correlation coefficient (P < .05). Results: Patients with Class II malocclusion and moderate to severe crowding had significantly smaller maxillary and mandibular effective lengths than subjects with the same malocclusion and slight mandibular crowding. A weak inverse correlation was also found between maxillary and mandibular effective lengths and the severity of dental crowding. Conclusion: Decreased maxillary and mandibular effective lengths constitute an important factor associated with dental crowding in patients with complete Class II malocclusion. (Angle Orthod. 2011;81:217-221.)

Class II Correction with the Cantilever Bite Jumper

Objective: To identify the skeletal, dentoalveolar, and soft tissue changes that occur during Class II correction with the Cantilever Bite Jumper (CBJ). Materials and Methods: This prospective cephalometric study was conducted on 26 subjects with Class II division 1 malocclusion treated with the CBJ appliance. A comparison was made with 26 untreated subjects with Class II malocclusion. Lateral head films from before and after CBJ therapy were analyzed through conventional cephalometric and Johnston analyses. Results: Class II correction was accomplished by means of 2.9 mm apical base change, 1.5 mm distal movement of the maxillary molars, and 1.1 mm mesial movement of the mandibular molars. The CBJ exhibited good control of the vertical dimension. The main side effect of the CBJ is that the vertical force vectors of the telescope act as lever arms and can produce mesial tipping of the mandibular molars. Conclusions: The Cantilever Bite Jumper corrects Class II malocclusions with similar percentages of skeletal and dentoalveolar effects. (Angle Orthod. 2009:79;)

Tooth-wear patterns in adolescents with normal occlusion and Class II Division 2 malocclusion

Introduction: In this study, we investigated tooth-wear patterns in adolescents with either normal occlusion or Class II Division 2 malocclusion. Methods: The sample consisted of dental casts from 165 subjects that were divided into 2 groups: 115 normal occlusion subjects (mean age, 14.3 years) and 50 complete Class II Division 2 subjects (mean age, 13.9 years). Dental wear was assessed by using a modified version of the tooth wear index. The 2 groups were compared with the Mann-Whitney test for the frequency and severity of wear on each surface of each group of teeth. The level of statistical significance was set at 5%. Results: The normal occlusion group statistically had greater tooth wear on the incisal surfaces of the maxillary lateral incisors and the incisal surfaces of the maxillary canines than did the Class II Division 2 malocclusion group. The malocclusion group showed statistically greater tooth wear on the labial surfaces of the mandibular lateral incisors, the occlusal surfaces of the maxillary premolars and first molars, the occlusal surfaces of the mandibular premolars, the palatal surfaces of the maxillary second premolars, and the buccal surfaces of the mandibular premolars and first molars than did the normal occlusion group. Conclusions: Subjects with normal occlusion and those with complete Class II Division 2 malocclusions have different tooth-wear patterns. Tooth wear on the malocclusion subjects should not be considered pathologic but, rather, the consequence of different interocclusal arrangements. (Am J Orthod Dentofacial Orthop 2010;137:730.e1-730.e5)

Tooth-wear patterns in subjects with Class II Division 1 malocclusion and normal occlusion

Introduction: The aim of this study was to investigate the prevalence of tooth wear in adolescents with Class II malocclusion, compared with those with normal occlusion. Methods: The sample consisted of dental casts obtained from 310 subjects, divided into 3 groups: group 1, 110 subjects with normal occlusion (mean age, 13.51 years); group 2, 100 complete Class II Division 1 patients (mean age, 13.44 years); and group 3, 100 half-cusp Class II Division 1 patients (mean age, 13.17 years). Dental wear was assessed by using a modified version of the tooth-wear index. The 3 groups were compared by means of the Kruskal-Wallis and Dunn tests, considering the frequency and the severity of wear on each surface of each group of teeth. The level of statistical significance was set at 5%. Results: The normal occlusion group had statistically greater tooth wear on the palatal surfaces of the maxillary central incisors and the incisal surfaces of the maxillary canines than the corresponding surfaces in both Class II malocclusion groups. The complete and half-cusp Class II Division 1 malocclusion groups had statistically greater tooth wear on the occlusal surfaces of the maxillary second premolar and first molar, the occlusal surfaces of the mandibular premolars, and the buccal surfaces of the mandibular posterior teeth compared with the normal occlusion group. The half-cusp Class II Division 1 malocclusion group had significantly greater tooth wear on the incisal surfaces of the mandibular incisors compared with the complete Class II Division 1 malocclusion group. Conclusions: Subjects with normal occlusion and complete or half-cusp Class II Division 1 malocclusions have different tooth-wear patterns. Tooth wear on the malocclusion subjects should not be considered pathologic but rather consequent to the different interocclusal tooth arrangement. (Am J Orthod Dentofacial Orthop 2010; 137: 14. e1-14.e7)

Effects of the pendulum appliance, cervical headgear, and 2 premolar extractions followed by fixed appliances in patients with Class II malocclusion

Introduction: In this retrospective study, we compared the cephalometric effects, the dental-arch changes, and the efficiency of Class II treatment with the pendulum appliance, cervical headgear, or extraction of 2 maxillary premolars, all associated with fixed appliance therapy. Methods: The sample of 82 patients with Class II malocclusion was divided into 3 groups: group 1 patients (n = 22; treatment time, 3.8 years) were treated with the pendulum appliance and fixed orthodontic appliances. Group 2 patients (n = 30; treatment time, 3.2 years) were treated with cervical headgear followed by fixed appliances; group 3 patients (n = 30; treatment time, 2.1 years) were treated with 2 maxillary premolar extractions and fixed appliances. The average starting ages of the groups ranged from 13.2 to 13.8 years. Data were obtained from serial cephalometric measurements and dental casts. The dental casts were analyzed with the treatment priority index. The treatment efficiency index was also used. Results: The 3 treatment protocols produced similar cephalometric effects, especially skeletally. Comparisons among the 2 distalizing appliances (pendulum and cervical headgear) and extraction of 2 maxillary premolars for Class II treatment showed changes primarily in the maxillary dentoalveolar component and dental relationships. The facial profile was similar after treatment, except for slightly more retrusion of the upper lip in the extraction patients. The treatment priority index demonstrated that occlusal outcomes also were similar among the groups. The treatment efficiency index had higher values for the extraction group. Conclusions: The effects of treatment with the pendulum appliance or cervical headgear and extraction of 2 maxillary premolars associated with fixed appliances were similar from both occlusal and cephalometric standpoints. Class II treatment with extraction of maxillary teeth was more efficient because of the shorter treatment time. Differences in maxillary incisor retraction should be noted, but these differences might have been due to greater maxillary dentoalveolar protrusion in the extraction group before treatment. (Am J Orthod Dentofacial Orthop 2009;136:833-42)

Strategic maxillary second-molar extraction in Class II malocclusion

Maxillary second-molar extraction in Class II malocclusion is a controversial issue in orthodontics. This treatment protocol is rigorous and not routine. In this case report, we present the orthodontic treatment of a patient with a Class II malocclusion, maxillary crowding, and no mandibular first molars, treated with extraction of the maxillary second molars. The mechanotherapy and indications of maxillary second- molar extraction are discussed. (Am J Orthod Dentofacial Orthop 2009;136:878-86)