Different thermal analysis technique application in determination of fold surface-free energy

In this work, the crystallization rates and spherulitic growth rate of miscible blends of poly(vinylidene fluoride) (PVDF) and acrylic rubber (ACM) were determined using differential scanning calorimetry (DSC), real-time FTIR, and optical microscopy. FTIR results suggest that blending does not induce the creation of polymorphic crystalline forms of PVDF. SAXS data demonstrate the formation of interlamellar structure after blending. The fold surface-free energy (σ e) was analyzed and compared using different thermal analysis techniques. The isothermal crystallization curves obtained using real-time FTIR and DSC explored in two different methods: t 1/2 or Avrami equation. While the Avrami equation is more widespread and precise, both analytical methods gave similar free energy of folding values. However, it was found that the direct optical method of measuring spherulitic growth rate yields σ e values 30-50 % lower than those obtained from the overall crystallization rate data. Conversely, the σ e values were found to increase with increasing amorphous ACM phase content regardless of the analytical methods.

Centers on center manifolds in the Lu system

We confirm a conjecture of Mello and Coelho [Phys. Lett. A 373 (2009) 1116] concerning the existence of centers on local center manifolds at equilibria of the Lu system of differential equations on R(3). Our proof shows that the local center manifolds are algebraic ruled surfaces, and are unique. (C) 2011 Elsevier B.V. All rights reserved.

Despacho ótimo de potências ativa e reativa de sistema elétricos multi-áreas considerando restrições físicas, econômicas e ambientais =: Envronmentally constrained active-reactive optimal power flow-a compromising strategy for economic-emission dispatch and a multi-area paradigm

Pós-graduação em Engenharia Elétrica - FEIS

Bone-added periodontal plastic surgery: a new approach in esthetic dentistry

This article proposes a combined technique including bone grafting, connective tissue graft, and coronally advanced flap to create some space for simultaneous bone regrowth and root coverage. A 23 year-old female was referred to our private clinic with a severe class II Miller recession and lack of attached gingiva. The suggested treatment plan comprised of root coverage combined with xenograft bone particles. The grafted area healed well and full coverage was achieved at 12-month follow-up visit. Bone-added periodontal plastic surgery can be considered as a practical procedure for management of deep gingival recession without buccal bone plate.

Emin Pascha und die Meuterei in Äquatoria : neunmonatlicher Aufenthalt und Gefangenschaft in den letzten der Sudan-Provinzen

von A. J. Mounteney Jephson und Henry M. Stanley

Long-term Tillage and Crop Rotation Effects on Soil Carbon and Soil Productivity

Tillage system and crop rotation have a significant, long-term effect on soil productivity and soil quality components such as soil carbon and other soil physical, biological, and chemical properties. In addition, both tillage and crop rotation have effects on weed and soil disease control. There is a definite need for well-defined, long-term tillage and crop rotation studies across the different soils and climate conditions in the state. The objective of this study was to evaluate the long-term effects of different tillage systems and crop rotations on soil productivity

Long-term Tillage and Crop Rotation Effects on Yield

Tillage system and crop rotation have a major long-term effect on soil productivity and soil quality components such as soil carbon and other soil physical, biological, and chemical properties. In addition, both tillage and crop rotation have effects on weed and soil disease control. There is a need for well-defined, longterm tillage and crop rotation studies across the different soils and climate conditions in the state. The objective of this study was to evaluate the long-term effects of different tillage systems and crop rotations on soil productivity.

Analysing the Impact of Consumer Tendency in HORECA Distribution Models

With increasing complexity of today's consumer requirements, food industry decision makers should be able to respond to consumer needs much faster than ever before. The preliminary studies showed that for improving the performance and selecting suitable distribution models, decision makers in food industries should classify different types of consumers and based on the classification prepare different distributions flows. By studying the HORECA distribution channel, this paper suggest that, logistics decision makers should investigate the relationship between consumers' characteristics and urban freight distribution strategy in order to respond to the exact needs and in the follow to reduce the logistics cost.

Imaging Land Subsidence Induced by Groundwater Extraction in Beijing (China) Using Satellite Radar Interferometry

Beijing is one of the most water-stressed cities in the world. Due to over-exploitation of groundwater, the Beijing region has been suffering from land subsidence since 1935. In this study, the Small Baseline InSAR technique has been employed to process Envisat ASAR images acquired between 2003 and 2010 and TerraSAR-X stripmap images collected from 2010 to 2011 to investigate land subsidence in the Beijing region. The maximum subsidence is seen in the eastern part of Beijing with a rate greater than 100 mm/year. Comparisons between InSAR and GPS derived subsidence rates show an RMS difference of 2.94 mm/year with a mean of 2.41 ± 1.84 mm/year. In addition, a high correlation was observed between InSAR subsidence rate maps derived from two different datasets (i.e., Envisat and TerraSAR-X). These demonstrate once again that InSAR is a powerful tool for monitoring land subsidence. InSAR derived subsidence rate maps have allowed for a comprehensive spatio-temporal analysis to identify the main triggering factors of land subsidence. Some interesting relationships in terms of land subsidence were found with groundwater level, active faults, accumulated soft soil thickness and different aquifer types. Furthermore, a relationship with the distances to pumping wells was also recognized in this work.

Tuḥfat ahl al-fukāhah fī al-munādamah wa-al-nazāhah

li-muʼallifihi Muḥammad Afandī Saʻd. Wa-bi-hāmishihi Kitāb Aṭbāq al-dhahab / li-ʻAbd al-Muʼmin al-Maghribī al-Iṣfahānī.

Education and Social Protection Systems in Southern and Eastern Mediterranean Countries. MEDPRO Technical Report No. 20/January 2013

This report assesses the current status of the education and social protection systems in 11 southern and eastern Mediterranean countries. It compares these countries using various education indicators and attempts to highlight the main differences in the social protection systems among the countries using qualitative analysis. The report finds that despite the differences among the countries, they share a common feature: when measured by the UN Development Programme’s Human Development Index (HDI), their inequality-adjusted values are significantly lower than their HDI values and ranks when not taking inequality into account. Nevertheless, significant improvements have been achieved in all the quantitative indicators for education, while the qualitative performance is still modest in the majority of the countries studied. As to the social protection aspect, the research reveals that various social protection programmes are being adopted in the 11 countries. As most of their financing is covered by government budgets, however, this places a high fiscal burden on them. Yet few of the countries (Turkey being the most notable) are trying to improve the sustainability of their social insurance schemes.

Hādhā kitāb Maṭāliʻ al-masarrāt bi-jalāʼ Dalāʼil al-khayrāt /

Mode of access: Internet.

Hādhā nuskhah tarīfah wa-risālah sharīfah al-musammāh bi-Tajrīd al-uṣūl [microform] /

Microfilm.

Modelling and measurements on a condensing counter-flow heat exchanger

Experimental investigations and computer modelling studies have been made on the refrigerant-water counterflow condenser section of a small air to water heat pump. The main object of the investigation was a comparative study between the computer modelling predictions and the experimental observations for a range of operating conditions but other characteristics of a counterflow heat exchanger are also discussed. The counterflow condenser consisted of 15 metres of a thermally coupled pair of copper pipes, one containing the R12 working fluid and the other water flowing in the opposite direction. This condenser was mounted horizontally and folded into 0.5 metre straight sections. Thermocouples were inserted in both pipes at one metre intervals and transducers for pressure and flow measurement were also included. Data acquisition, storage and analysis was carried out by a micro-computer suitably interfaced with the transducers and thermocouples. Many sets of readings were taken under a variety of conditions, with air temperature ranging from 18 to 26 degrees Celsius, water inlet from 13.5 to 21.7 degrees, R12 inlet temperature from 61.2 to 81.7 degrees and water mass flow rate from 6.7 to 32.9 grammes per second. A Fortran computer model of the condenser (originally prepared by Carrington[1]) has been modified to match the information available from experimental work. This program uses iterative segmental integration over the desuperheating, mixed phase and subcooled regions for the R12 working fluid, the water always being in the liquid phase. Methods of estimating the inlet and exit fluid conditions from the available experimental data have been developed for application to the model. Temperature profiles and other parameters have been predicted and compared with experimental values for the condenser for a range of evaporator conditions and have shown that the model gives a satisfactory prediction of the physical behaviour of a simple counterflow heat exchanger in both single phase and two phase regions.