Are pulsars born with a hidden magnetic field?

The observation of several neutron stars in the centre of supernova remnants and with significantly lower values of the dipolar magnetic field than the average radio-pulsar population has motivated a lively debate about their formation and origin, with controversial interpretations. A possible explanation requires the slow rotation of the protoneutron star at birth, which is unable to amplify its magnetic field to typical pulsar levels. An alternative possibility, the hidden magnetic field scenario, considers the accretion of the fallback of the supernova debris on to the neutron star as responsible for the submergence (or screening) of the field and its apparently low value. In this paper, we study under which conditions the magnetic field of a neutron star can be buried into the crust due to an accreting, conducting fluid. For this purpose, we consider a spherically symmetric calculation in general relativity to estimate the balance between the incoming accretion flow and the magnetosphere. Our study analyses several models with different specific entropy, composition, and neutron star masses. The main conclusion of our work is that typical magnetic fields of a few times 1012 G can be buried by accreting only 10−3–10−2 M⊙, a relatively modest amount of mass. In view of this result, the central compact object scenario should not be considered unusual, and we predict that anomalously weak magnetic fields should be common in very young (< few kyr) neutron stars.

Magnetic state of ocean basalts (Table 1)

The natural remanent magnetization (NRM) of ocean basalts, giving rise to the pattern of marine magnetic anomalies, is known to be of comparatively low intensity for about 20 Ma old oceanic crust. The aim of this study is to detect possible peculiarities in the rock magnetic properties of ocean basalts of this age, and to establish a link between magnetomineralogy, rock magnetic parameters, and the low NRM intensity. Ocean basalts covering ages from 0.7 to 135 Ma were selected for rock magnetic experiments and their room temperature hysteresis parameters, Curie temperature and temperature dependence of saturation magnetization MS(T) was determined and complemented by reflected light microscopy. The majority of samples is magnetically dominated by titanomagnetite and titanomaghemite with increasing oxidation state with age. For these, a strong dependence of hysteresis parameters on the age of the samples is found. The samples have a minimum in saturation magnetization and a maximum in magnetic stability in the age interval ranging from approximately 10 to 40 Ma, coinciding with the age interval of low NRM intensity. The observed change in saturation magnetization is in the same order as that for the NRM intensity. A further peculiarity of the titanomaghemites from this age interval is the shape of their MS(T) curves, which display a maximum above room temperature (Neel P-type) and, sometimes, a self-reversal of magnetization below room temperature (Neel N-type). These special rock magnetic properties can be explained by titanomagnetite low-temperature oxidation and highly oxidized titanomaghemites in the age interval 10-40 Ma. A corresponding measurement of the NRM at elevated temperature allows to identify a maximum in NRM intensity above room temperature for the samples in that age interval. This provides evidence that the NRM is equally carried by titanomaghemites and that the low NRM intensities for about 20 Ma old ocean basalts are caused consequently by the low saturation magnetization of these titanomaghemites.

Tailoring Magnetic, Mechanical and Dielectric Properties of Magnetorheological Elastomers based on Natural Rubber and Iron by Magnetic Field Assisted Curing for Possible Applications

If magnetism is universal in nature, magnetic materials are ubiquitous. A life without magnetism is unthinkable and a day without the influence of a magnetic material is unimaginable. They find innumerable applications in the form of many passive and active devices namely, compass, electric motor, generator, microphone, loud speaker, maglev train, magnetic resonance imaging, data recording and reading, hadron collider etc. The list is endless. Such is the influence of magnetism and magnetic materials in ones day to day life. With the advent of nanoscience and nanotechnology, along with the emergence of new areas/fields such as spintronics, multiferroics and magnetic refrigeration, the importance of magnetism is ever increasing and attracting the attention of researchers worldwide. The search for a fluid which exhibits magnetism has been on for quite some time. However nature has not bestowed us with a magnetic fluid and hence it has been the dream of many researchers to synthesize a magnetic fluid which is thought to revolutionize many applications based on magnetism. The discovery of a magnetic fluid by Jacob Rabinow in the year 1952 paved the way for a new branch of Physics/Engineering which later became magnetic fluids. This gave birth to a new class of material called magnetorheological materials. Magnetorheological materials are considered superior to electrorheological materials in that magnetorheology is a contactless operation and often inexpensive.Most of the studies in the past on magnetorheological materials were based on magnetic fluids. Recently the focus has been on the solid state analogue of magnetic fluids which are called Magnetorheological Elastomers (MREs). The very word magnetorheological elastomer implies that the rheological properties of these materials can be altered by the influence of an external applied magnetic field and this process is reversible. If the application of an external magnetic field modifies the viscosity of a magnetic fluid, the effect of external magnetic stimuli on a magnetorheological elastomer is in the modification of its stiffness. They are reversible too. Magnetorheological materials exhibit variable stiffness and find applications in adaptive structures of aerospace, automotive civil and electrical engineering applications. The major advantage of MRE is that the particles are not able to settle with time and hence there is no need of a vessel to hold it. The possibility of hazardous waste leakage is no more with a solid MRE. Moreover, the particles in a solid MRE will not affect the performance and durability of the equipment. Usually MR solids work only in the pre yield region while MR fluids, typically work in the post yield state. The application of an external magnetic field modifies the stiffness constant, shear modulus and loss modulus which are complex quantities. In viscoelastic materials a part of the input energy is stored and released during each cycle and a part is dissipated as heat. The storage modulus G′ represents the capacity of the material to store energy of deformation, which contribute to material stiffness. The loss modulusG′′ represents the ability of the material to dissipate the energy of deformation. Such materials can find applications in the form of adaptive vibration absorbers (ATVAs), stiffness tunable mounts and variable impedance surfaces. MREs are an important material for automobile giants and became the focus of this research for eventual automatic vibration control, sound isolation, brakes, clutches and suspension systems

The development of dynamic CFD model of the magnetic semi-levitation of liquid metals

In the casting of reactive metals, such as titanium alloys, contamination can be prevented if there is no contact between the hot liquid metal and solid crucible. This can be achieved by containing the liquid metal by means of high frequency AC magnetic field. A water cooled current-carrying coil, surrounding the metal can then provide the required Lorentz forces, and at the same time the current induced in the metal can provide the heating required to melt it. This ‘attractive’ processing solution has however many problems, the most serious being that of the control and containment of the liquid metal envelope, which requires a balance of the gravity and induced inertia forces on the one side, and the containing Lorentz and surface tension forces on the other. To model this process requires a fully coupled dyna ic solution of the flow fields, magnetic field and heat transfer/melding process to account for. A simplified solution has been published previously providing quasi-static solutions only, by taking the irrotational ‘magnetic pressure’ term of the Lorentz force into account. The authors remedy this deficiency by modelling the full problem using CFD techniques. The salient features of these techniques are included in this paper, as space allows.

Solar magnetic carpet I: simulation of synthetic magnetograms

This paper describes a new 2D model for the photospheric evolution of the magnetic carpet. It is the first in a series of papers working towards constructing a realistic 3D non-potential model for the interaction of small-scale solar magnetic fields. In the model, the basic evolution of the magnetic elements is governed by a supergranular flow profile. In addition, magnetic elements may evolve through the processes of emergence, cancellation, coalescence and fragmentation. Model parameters for the emergence of bipoles are based upon the results of observational studies. Using this model, several simulations are considered, where the range of flux with which bipoles may emerge is varied. In all cases the model quickly reaches a steady state where the rates of emergence and cancellation balance. Analysis of the resulting magnetic field shows that we reproduce observed quantities such as the flux distribution, mean field, cancellation rates, photospheric recycle time and a magnetic network. As expected, the simulation matches observations more closely when a larger, and consequently more realistic, range of emerging flux values is allowed (4×1016 - 1019 Mx). The model best reproduces the current observed properties of the magnetic carpet when we take the minimum absolute flux for emerging bipoles to be 4×1016 Mx. In future, this 2D model will be used as an evolving photospheric boundary condition for 3D non-potential modeling.

Efficacy of neurostimulation to treat symptoms of Mal de Debarquement Syndrome. A preliminary study using repetitive transcranial magnetic stimulation

Mal de debarquement syndrome (MdDS) is a rare and poorly understood condition of perceived continual motion. Using a multiple-case design (n = 13; 8 f; 63.5 ± 12.6 years), this study investigated the efficacy of eight 20-min sessions, over 4 weeks, of repetitive transcranial magnetic stimulation (rTMS) of the dorsolateral pre-frontal cortex. Compared to sham, rTMS demonstrated improvement in balance and confidence in daily living activities. rTMS shows promise for the treatment of MdDS. However, larger trials with longer intervention periods are required.

Work/Family Balance: HRM Policy and Practice in Australia

An employee's inability to balance work and family responsibilities has resulted in an increase in stress related illnesses. Historically, research into the nexus between work and family has primarily focused on the work/family conflict relationship, predominately investigating the impact of this conflict on parents, usually mothers. To date research has not sufficiently examined the human resource management practices that enable all parents to achieve a balance between their work and family lives. This paper explores the relationship between contemporary family friendly HRM policies and employed parents perceptions of work/family enhancement, work/family satisfaction, propensity to turnover, and work/family conflict. Self-report questionnaire data from 326 men and women is analysed and discussed to enable organisations to consider the use of family friendly policies and thus create a convergence between the well-being of employees and the effectiveness of the organisation.