Mass fractal characteristics of wet sonogels as determined by small-angle x-ray scattering and differential scanning calorimetry

Low density silica sonogels were prepared from acid sonohydrolysis of tetraethoxysilane. Wet gels were studied by small-angle x-ray scattering (SAXS) and differential scanning calorimetry (DSC). The DSC tests were carried out under a heating rate of 2 degrees C/min from -120 degrees C up to 30 degrees C. Aerogels were obtained by CO(2) supercritical extraction and characterized by nitrogen adsorption and SAXS. The DSC thermogram displays two distinct endothermic peaks. The first, a broad peak extending from about -80 degrees C up to practically 0 degrees C, was associated to the melting of ice nanocrystals with a crystal size distribution with pore diameter ranging from 1 or 2 nm up to about 60 nm, as estimated from Thomson's equation. The second, a sharp peak with onset temperature close to 0 degrees C, was attributed to the melting of macroscopic crystals. The DSC incremental nanopore volume distribution is in reasonable agreement with the incremental pore volume distribution of the aerogel as determined from nitrogen adsorption. No macroporosity was detected by nitrogen adsorption, probably because the adsorption method applies stress on the sample during measurement, leading to a underestimation of pore volume, or because often positive curvature of the solid surface is in aerogels, making the nitrogen condensation more difficult. According to the SAXS results, the solid network of the wet gels behaves as a mass fractal structure with mass fractal dimension D=2.20 +/- 0.01 in a characteristic length scale below xi=7.9 +/- 0.1 nm. The mass fractal characteristics of the wet gels have also been probed from DSC data by means of an earlier applied modeling for generation of a mass fractal from the incremental pore volume distribution curves. The results are shown to be in interesting agreement with the results from SAXS.

Atributos físicos de latossolo vermelho sob pousio ou cultivado com forrageiras tropicais sob pastejo

The objective was to study the physical attributes of an Oxisol under fallow or planted with tropical grasses under grazing. The experiment was conducted under the experimental design of randomized blocks in split-plot 2 x 5, being five types of use of soil (Brachiaria ruziziensis, Panicum maximum cv. Aries, Brachiaria brizantha cv. MG5, Panicum maximum cv. Mombaca and fallow) and two evaluation periods (after the first and after the second grazing), with four replications. We evaluated the characteristics of soil bulk density, total porosity, microporosity and macroporosity, after the first and second grazing, and soil resistance to penetration after the second grazing. In layer of 0.00 to 0.10 m, the macroporosity was affected by the interaction between types of use and evaluation periods, while the microporosity and total porosity were reduced and the density was increased from first to second evaluation time. In the subsurface layer (0.10-0.20 m), there were significant effect only of evaluation time, on the macroporosity, total porosity and density. The porosity were reduced, while the density increased from first to second evaluation time. No significant effects of types of use of soil on penetration resistance in all layers studied. The maintenance of an Oxisol under fallow or cultivation with tropical grasses subjected to grazing cattle causes a reduction in total porosity and increased density of surface soil layers (0 to 0.10 m) and subsurface (0.10 - 0.20 m), without promoting changes on resistance to penetration mechanics.

Atributos físicos do solo e produtividade do milho sob sistemas de manejo e adubações

No-tillage system is an efficient technique in control of soil erosion, when compared with conventional tillage, however, some studies indicate higher compaction under no-tillage, mainly in the surface layer. Strategies that increase the organic matter content, as crop rotation and organic fertilization, can be used to solve the soil compaction. The aim of this study was to evaluate the effect of soil managements (crop succession and crop rotation) and fertilization (organic, mineral and organic-mineral) in the physical properties of the soil, under no-tillage system, from 2006 to 2008. The evaluations were carried out in February 2007, after the summer corn harvest, and in September 2008, after the winter corn harvest. Crop rotation decreased the soil density and soil resistance to penetration and increased the macroporosity and total porosity. The use of organic sources of fertilization did not affect any of the physical attributes of soil. The yield of summer corn was highest in succession crop and mineral fertilization, however, in the winter, there was no difference between the soil managements and among the fertilizations.

Distribuição de poros e densidade de latossolos submetidos a diferentes sistemas de uso e manejo

Man cultivates the soil for centuries, but the intensive business and use of the soils under Cerrado vegetation for agricultural production grew out of the seventies. The objective of this study was to evaluate soil physical characteristics as a function of sampling time and the soil uses in a Cerrado area in Uberlandia City - MG, Brazil. The managements were adopted: degraded pasture (M-1), conventional tillage (M-2), minimum tillage (M-3), tillage absence (M-4), no-tillage (NT) for three years (M-5); NT for nine years (M-6), NT for three years after Pinus (M-7), PD for one year after Pinus (M-8) and Pinus forest (M-9) with 25 years old. The evaluations were conducted in 2002/03 growing season, in two areas. The soils were: area 1, an Oxisol (Red Latosol - LV-1, M-1 through M-5) and area 2, two Oxisols (Red Latosol and Red-Yellow Latosol - LVA and LV-2, M-6 through M-9). The physical attributes studied changed depending of the soil class, sampling time and management systems, with emphasis on the area 2 soils, which, in general, better preserved its main physical attributes. Managements with intense tillage, such as the M-2, are the most soil physically degrade, presenting mostly negative changes to soil bulk density, total porosity, microporosity and macroporosity. Since the systems which promote less tillage, in short term, to preserve desirable physical attributes. The M-9 system had the lowest attributes range, compared to the others.

Spatial variability of infiltration and its relationship to some physical properties

Water infiltration into soil is one of the basic factors for estimating irrigation intensity according to the plants' requirements; this is aimed at avoiding problems of surface run-off and degradation. The purpose of the present investigation was to determine the spatial variation of infiltration and its relationship to some physical properties of soil by means of geostatistical techniques in Typic Plinthaquult soils having average texture and flat relief. A 113 point mesh was designned, having a regular distance of 10 m between points, samples being taken from 0 to 0.20 meters depth. Sand, silt and clay content, bulk density, macroporosity, microporosity and total porosity were determined. Infiltration tests were carried out in the field by means of a 15 cm diameter ring. Descriptive statistics and geostatistics were used for analysing the data. Infiltration, silt and microporosity data did not fit a normal distribution curve. Infiltration had high variability, having an average 36.03 mm h(-1). Total porosity was 56.73%, this being the only property that did not show spatial dependency. The smallest ranges were observed for bulk density, macroporosity and microporosity, having values of less than 40 m. The smallest degrees of spatial dependence were observed for infiltration, silt and clay, evidence also being shown of the influence of silt and clay on infiltration rate. Contour maps were constructed; fitting them to the semivariogram models, together with studying the correlations, led to establishing relationships between the properties.

Development, characterization and clinical use of a biodegradable composite scaffold for bone engineering in oro-maxillo-facial surgery

We have developed a biodegradable composite scaffold for bone tissue engineering applications with a pore size and interconnecting macroporosity similar to those of human trabecular bone. The scaffold is fabricated by a process of particle leaching and phase inversion from poly(lactide-co-glycolide) (PLGA) and two calcium phosphate (CaP) phases both of which are resorbable by osteoclasts; the first a particulate within the polymer structure and the second a thin ubiquitous coating. The 3-5 mu m thick osteoconductive surface CaP abrogates the putative foreign body giant cell response to the underlying polymer, while the internal CaP phase provides dimensional stability in an otherwise highly compliant structure. The scaffold may be used as a biomaterial alone, as a carrier for cells or a three-phase drug delivery device. Due to the highly interconnected macroporosity ranging from 81% to 91%, with macropores of 0.8 similar to 1.8 mm, and an ability to wick up blood, the scaffold acts as both a clot-retention device and an osteoconductive support for host bone growth. As a cell delivery vehicle, the scaffold can be first seeded with human mesenchymal cells which can then contribute to bone formation in orthotopic implantation sites, as we show in immune-compromised animal hosts. We have also employed this scaffold in both lithomorph and particulate forms in human patients to maintain alveolar bone height following tooth extraction, and augment alveolar bone height through standard sinus lift approaches. We provide a clinical case report of both of these applications; and we show that the scaffold served to regenerate sufficient bone tissue in the wound site to provide a sound foundation for dental implant placement. At the time of writing, such implants have been in occlusal function for periods of up to 3 years in sites regenerated through the use of the scaffold.

Adubação verde em Citrus: Influência na porosidade e retenção de água de um latossolo vermelho-escuro do noroeste do estado de São Paulo

The objective of this research was to study the porosity, bulk density and retention of water of an Oxisol, located in the Northwestern region of Sn̄o Paulo state, Brazil. The soil was cultivated with Citrus sp., to which green manure was applied between rows for three years. Each of six species of green manure crops (Crotalaria juncea L., Mucuna deeringiana Steph. & Bart., Canavalia ensiformis L. DC., Cajanus cajan L., Lablab purpureum L. and Ricinus communis L.) were seeded for three years (1995, 1996 and 1997) between Citrus rows, plus a treatment with a mix of all six species and a control (natural regrowth af vegetation). The experimental design was a randomized complete block design, with four replications for each of the eight treatments. Water retention, microporosity, macroporosity, total porosity and bulk density were analyzed in the beginning (1995) and end (1997) of the experiment, at three depth ranges (0-0.10; 0.10-0.20 and 0.20-0.40m). We concluded that there were statistically significant differences for bulk density, macroporosity, total porosity and retention of water among the different soil depth ranges; there were no significant differences among treatments though.

Propriedades físicas e infiltração de água de um Latossolo Vermelho Amarelo (Oxisol) do noroeste do estado de São Paulo, Brasil, sob três condições de uso e manejo

This study presents the results obtained in a field experiment carried out at Glicério, Northwest of São Paulo state, Brazil, whose objective was to analyze changes of selected soil physical properties and water infiltration rates on a Yellow-Red Latosol, under three different management conditions. The experimental design was arranged as completely randomized split-block with twelve treatments, which corresponded to four depths (0-0.05 m; 0.05-0.10 m; 0.10-0.20 m and 0.20-0.40 m) and three conditions of soil use and management with four replications. The soil surface conditions were: conventional tillage (one disking with moulboard plus two levelling passes with harrow), nine months before starting filed experiences; recent conventional tillage (also one disking with moulboard plus two levelling passes with harrow) and native forest. The conventional tillage areas were cropped for about fifteen years with annual cultures. The considered soil general physical properties were: macroporosity, microporosity, total porosity, bulk density, soil moisture and penetration resistance and, in addition; soil water infiltration rates were also recorded. According to our results, differences on general soil physical properties and infiltration rates appeared when both tilled sub-treatments and native forest were compared. Both, plots recently prepared by conventional tillage and those prepared by tillage but left nine months in rest, presented a statistically significant decrease of constant (final) water infiltration rates of 92.72% and 91.91% when compared with native forest plots.

Propriedades físicas de um latossolo vermelho cultivado no sistema plantio direto

The pressure caused by agricultural machinery traffic many result in soil compactation in no-tillage system. The aim of this work was to evaluate no-tillage system onset,time on some physical properties, index S and organic matter (OM) of an oxysol located in Jaboticabal, Sao Paulo State, Brazil. The experiment had completely randomized split-splot design. The treatments consisted of four no-tillage systems: no-tillage for 2 years, no-tillage for 4 years, no-tillage for 6 years and one natural wooded area. The evaluated layers were: Q-0.10m, 0.10-0.20m and 0.20-030m. The following were determined: soil porosity, soil aggregates, bulk density, index S and organic matter. The results were submitted to variance analysis and when there was a difference between averages, Tukey's test was used to compare them. The natural wooded area showed higher organic matter, macroporosity, hydraulic conductivity and Index S. There was no difference between the studied parameters, showing that the no-tillage system for six years was not enough to change the soil physical property.

Compactação do solo e intervalo hídrico ótimo no crescimento da parte aérea e produtividade da cultura do milho

The aim of this work was to evaluate the effect of soil compaction caused by tractor wheel traffic on the limiting water range (LLWR), shoot growth and levels of compaction and four replications in a completely randomized experimental design. Soil samples with preserved structure were collected in the layers: 0.02-0.05; 0.08-0.11; 0.15-0.18 and 0.22-0.25m to determine macroporosity, microporosity, total porosity, bulk density, resistance to penetration and LLWR. The evaluated corn parameters were: plant and first spike height, steam diameter, number of spikes per plant, plant dry matter, dry matter of 1000 seeds and seed productivity. The soil compaction restricted all corn parameters except the number of spikes per plant and dry matter of 1000 seeds. The LLWR was reduced by the soil resistance to penetration, even in the tilled soil with bulk density of 1.12 Mg m-3. Only the treatment with 11 Mg tractor, repeated four times on the area, demonstrated bulk density above critical bulk density in the LLWR that was 1.37 Mg m-3, where the seed productivity was significantly smaller.

Determination of the quality index of a Paleudult under sunflower culture and different management systems

Soil is an essential resource for life and its properties are susceptible to be modified by tillage systems. The impact of management practices on soil functions can be assessed through a soil quality index. It is interesting to assess soil quality in different soil types. Therefore, the aim of this study was to determine the soil quality index of a Paleudult under different management conditions and sunflower culture. The experiment was carried out in Botucatu (SP, Brazil), in an 11-year non-tilled area used for growing soybean and maize during summer and black oat or triticale in winter. Four management systems were considered: no-tillage with a hoe planter (NTh), no-tillage with a double-disk planter (NTd), reduced tillage (RT) and conventional tillage (CT). Soil samples were taken from the planting lines at harvest time. To determine the soil quality indices, following the methodology proposed by Karlen and Stott (1994), three main soil functions were assessed: soil capacity for root development, water storage capacity of the soil and nutrient supply capacity of the soil. The studied Paleudult was considered a soil with good quality under all the observed management systems. However, the soil quality indices varied between treatments being 0.64, 0.68, 0.86 and 0.79 under NTh, NTd, RT and CT, respectively. Physical attributes such as resistance to penetration and macroporosity increased the soil quality index in RT and CT compared to NTh and NTd. The soil quality indices obtained suggested that the evaluated soil is adequate for sunflower production under our study conditions. In view of the SQI values, RT is the most suitable management for this site since it preserves soil quality and provides an acceptable sunflower yield. © 2011 Elsevier B.V.

Correlação linear e espacial entre a produtividade e o teor de proteína bruta do guandu anão e os atributos de um Latossolo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Atributos físicos do solo em diferentes condições de cobertura vegetal em área de plantio direto

The use of cover crops in the soil causes changes in soil attributes influencing in a series of hydro-physical processes, which also modify the ability of soil to support the many activities that it is intended. Thus, the objective of this study was to evaluate the effect of cover crops on physical attributes of the soil. For this, an experiment was carried out on a Typic Hapludox, Jaboticabal State, Brazil, using cover crops of millet, sunn hemp, jack bean, lab-lab and black velvet bean in no-tillage and fallow area (spontaneous vegetation). The characteristics evaluated were the bulk density, macroporosity, microporosity, total porosity, aggregate stability, penetration resistance and organic matter. The incorporation of cover crops has proved to be a beneficial practice for the physical attributes of the soil, allowing a greater aggregate stability compared to fallow in the depth of 0-0.05 m. All cover crops presented values of soil penetration resistance below the critical value of 2 MPa.

Sistemas de manejo e atributos físico-hídricos de um Latossolo Vermelho cultivado com milho

The purpose of this experiment was to evaluate the hydro-physical attributes of the Red Oxisol cultivated with maize in Jaboticabal, São Paulo State, Brazil, under different systems of use and periods of adoption of managements. The experiment was arranged in a completely randomized design with split-plot arrangement, with six replications and the treatments were: six years of no-tillage system (SPD6), eight years of no-tillage system (SPD8), ten years of no-tillage system (SPD10), conventional tillage system (SPC) and an adjacent area of native forest (NF). The soil penetration resistance (PR), density, macroporosity, microporosity of the soil in layers of 0-0.05; 0.05-0.10 and 0.10-0.20 m, and the saturated hydraulic conductivity (Kθ) in 0.15 m depth were evaluated. It was found that the PR conditions were favorable for the cultivation to 0.20 m, indicating a structure preserved even after soil chiseling. Furthermore, the Kθ in the soil showed similar behavior between SPC and periods of SPD, although this was shown in a part of maize cycle, macroporosity values near 0.10 m3 m-3 and soil water tensions near 0.09 MPa.

Variabilidade espacial de atributos físicos em um cambissolo háplico, sob diferentes usos na região sul do Amazonas

Considering the importance of knowledge of the spatial distribution of soil properties, the purpose of this study was to evaluate the spatial variability of physical properties in a Cambisolunder different land uses in the southern Amazon region. The study was conducted on three farms with cassava, sugarcane, and agroforestry, in the region of Humaitá, in the south of the State of Amazonas. In these areas, 70 x 70 m grids were established, with a regular spacing of 10 x 10 m and a total of 64 points, where soils were sampled at 0.0-0.10 m depth. Texture (sand, silt, and clay), macroporosity, microporosity, total porosity, bulk density, and aggregate stabilitywere determined. The data were analyzed using descriptive statistics and geostatistics. It was found that the propertiesvaried spatially and that the range of these variations between land uses was different, with the highest variability for the sugarcane management.