Inorganic elemental analysis and identification of residual monomers released from different glass ionomer cements in cell culture medium

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Reversible polymerization of novel monomers bearing furan and plant oil moieties: a double click exploitation of renewable resources

Monomers based on plant oil derivatives bearing furan heterocycles appended through thiol-ene click chemistry were prepared and, subsequently, polymerized via a second type of click reaction, i. e. the Diels-Alder (DA) polycondensation between furan and maleimide complementary moieties. Two basic approaches were considered for these DA polymerizations, namely (i) the use of monomers with two terminal furan rings in conjunction with bismaleimides (AA + BB systems) and (ii) the use of a protected AB monomer incorporating both furan and maleimide end groups. This study clearly showed that both strategies were successful, albeit with different outcomes, in terms of the nature of the ensuing products. The application of the retro-DA reaction to these polymers confirmed their thermoreversible character, i. e. the clean-cut return to their respective starting monomers, opening the way to original macromolecular materials with interesting applications, like mendability and recyclability.

Influence of the base and diluent methacrylate monomers on the polymerization stress and its determinants

The aim of this study was to evaluate the effect of the association between bisphenol-A diglycidyl dimethacrylate (BisGMA) or its ethoxylated version (BisEMA) with diluents derived from the ethylene glycol dimethacrylate (EGDMA), with increasing number of ethylene glycol units (1: EGDMA, 2: DEGDMA, 3: TEGDMA, or 4: TETGDMA), or trimethylol propane trimethacrylate (TMPTMA) or 1,10-decanediol dimethacrylate (D3MA) on polymerization stress, volumetric shrinkage, degree of conversion, maximum rate of polymerization (Rpmax), and elastic modulus of experimental composites. BisGMA containing formulations presented lower shrinkage and stress but higher modulus and Rpmax than those containing BisEMA. TMPTMA presented the lowest stress among all diluents, as a result of lower conversion. EGDMA, DEGDMA, TEGDMA, and TETGDMA presented similar polymerization stress which was higher than the stress presented by D3MA and TMPTMA. D3MA presented similar conversion when copolymerized with both base monomers. The other diluents presented higher conversion when associated with BisEMA. EGDMA showed similar shrinkage compared with DEGDMA and higher than the other diluents. The lower conversion achieved by TMPTMA did not jeopardize its elastic modulus, similar to the other diluents. Despite the similar conversion presented by D3MA in comparison with EGDMA and DEGDMA, its lower elastic modulus may limit its use. Rather than proposing new materials, this study provides a systematic evaluation of off the shelf monomers and their effects on stress development, as highlighted by the analysis of conversion, shrinkage and modulus, to aid the optimization of commercially available materials. (c) 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

Structural analysis of the major lightharvesting complex II by electron paramagnetic resonance (EPR) : comparison between monomers and trimers

Der Haupt-Lichtsammenkomplex II (LHCII) höherer Pflanzen ist das häufigsternMembranprotein der Welt und in die chloroplastidäre Thylakoidmembran integriert. DerrnLHCII kann als Modellsystem genutzt werden, um die Funktionsweise vonrnMembranproteinen besser zu verstehen, da 96 % seiner Struktur kristallografisch aufgelöstrnist und er in rekombinanter Form in vitro rückgefaltet werden kann. Hierbei entsteht einrnvoll funktionaler Protein-Pigment.Komplex, der nahezu identisch mit der in vivo Varianternist.rnElektronenparamagnetischen Resonanz (EPR) Spektroskopie ist eine hoch sensitive undrnideal geeignete Methode, um die Strukturdynamik von Proteinen zu untersuchen. Hierzurnist eine ortsspezifische Markierung mit Spinsonden notwendig, die kovalent an Cysteinernbinden. Möglich wird dies, indem sorgfältig ausgewählte Aminosäuren gegen Cysteinerngetauscht werden, ohne dass die Funktionsweise des LHCII beeinträchtigt wird.rnIm Rahmen dieser Arbeit wurden die Stabilität des verwendeten Spinmarkers und diernProbenqualität verbessert, indem alle Schritte der Probenpräparation untersucht wurden.rnMithilfe dieser Erkenntnisse konnte sowohl die Gefahr einer Proteinaggregation als auchrnein Verlust des EPR Signals deutlich vermindert werden. In Kombination mit derrngleichzeitigen Etablierung des Q-Band EPR können nun deutlich geringer konzentrierternProben zuverlässig vermessen werden. Darüber hinaus wurde eine reproduzierbarernMethode entwickelt, um heterogene Trimere herzustellen. Diese bestehen aus einemrndoppelt markierten Monomer und zwei unmarkierten Monomeren und erlauben es, diernkristallografisch unvollständig aufgelöste N-terminale Domäne im monomeren undrntrimeren Assemblierungsgrad zu untersuchen. Die Ergebnisse konnten einerseits diernVermutung bestätigen, dass diese Domäne im Vergleich zum starren Proteinkern sehrrnflexibel ist und andererseits, dass sie in Monomeren noch mobiler ist als in Trimeren.rnZudem wurde die lumenale Schleifenregion bei unterschiedlichen pH Werten undrnvariierender Pigmentzusammensetzung untersucht, da dieser Bereich sehr kontroversrndiskutiert wird. Die Messergebnisse offenbarten, dass diese Region starre und flexiblerernSektionen aufweist. Während der pH Wert keinen Einfluss auf die Konformation hatte,rnzeigte sich, dass die Abwesenheit von Neoxanthin zu einer Änderung der Konformationrnführt. Weiterführende Analysen der strukturellen Dynamik des LHCII in einerrnLipidmembran konnten hingegen nicht durchgeführt werden, da dies eine gerichteternInsertion des rückgefalteten Proteins in Liposomen erfordert, was trotz intensiverrnVersuche nicht zum Erfolg führte.

Tailored epoxide monomers as building units for multifunctional poly(ethylene glycol)

Poly(ethylenglykol) (PEG) ist eines der wichtigsten Polymere für pharmazeutische und biomedizinische Zwecke. Dies lässt sich vor allen Dingen auf seine ausgezeichnete Biokompatibilität, seine hohe chemische Stabilität sowie seine sehr gute Wasserlöslichkeit zurückführen. Neben seiner Anwendung in Produkten wie Lebensmitteln und Kosmetika ist PEG vor allem im pharmazeutischen Bereich unersetzlich geworden. Hier dient PEG als Grundlage für Salben, es kommt aber auch in der sogenannten „PEGylierung“ zum Einsatz. Unter PEGylierung versteht man die kovalente Verknüpfung von PEG mit Wirkstoffmolekülen, beispielsweise Proteinen oder niedermolekularen Medikamenten. In der akademischen Forschung sind aber auch PEGylierte Nanopartikel oder durch PEG stablisierte Liposomen für die Applikation im Bereich der Medizin von hohem Interesse. Trotz seiner breiten Verwendung hat PEG zwei entscheidende Nachteile: Zum einen benötigt man gerade im Hinblick auf PEGylierungen viele funktionelle Gruppe, jedoch trägt PEG maximal zwei Hydroxyl-Gruppen (die Endgruppen), die für kovalente Verknüpfungen genutzt werden können. Zum anderen ist PEG nicht in physiologischer Umgebung abbaubar und kann daher in vivo oberhalb eines Molekulargewichts von 40 000 g/mol nicht eingesetzt werden, da sonst eine Ausscheidung über die Niere nicht möglich ist und eine ungewollte Anreicherung im Körper stattfindet.rnDie durch die geringe Anzahl an Endgruppen limitierte Beladungsdichte kann durch das Design neuer Epoxid-Derivate und deren statistischen Einbau in das PEG Rückgrat deutlich verbessert werden. Im ersten Teil dieser Arbeit werden drei neuartige funktionelle Oxirane vorgestellt, die systematisch mit Ethylenoxid copolymerisiert wurden, was die selektive Einführung verschiedener funktioneller Gruppen am Polymerrückgrat ermöglicht. Im Vordergrund der Betrachtungen standen die Eigenschaften der neuartigen multifunktionellen (mf)-PEG Copolymere im Hinblick auf ihr thermisches Verhalten sowie die Verteilung der funktionellen Gruppen (Mikrostruktur) innerhalb des PEG-Rückgrats. Die gezielte Adressierbarkeit der funktionellen Gruppen konnte durch verschiedene Modellreaktionen bestätigt werden. Darüber hinaus konnte gezeigt werden, dass sich mit der vorgestellten Synthesestrategie komplexe Hybridmaterialien, beispielsweise metallhaltige Polyether, darstellen lassen. Mit Hinblick auf die biomedizinischen Anwendungen und die Konkurrenz zu etablierten PEG-Hompolymeren, standen die Wasserlöslichkeit und die Toxizität der synthetisierten Materialien im Zentrum weiterer Untersuchungen. Alle dargestellten Polymere zeigten einen Trübungspunkt in Wasser, der sich in Abhängigkeit der Zusammensetzung und Hydrophobizität der Comonomere über ein weites Temperaturspektrum variieren und somit systematisch einstellen ließ. Die Toxizität der statistischen mf-PEGs lag im Bereich von PEG, was die mf-PEGs interessant für biomedizinische Anwendung macht.rnIm zweiten Teil der Arbeit wurden Copolymerisationen verwendet, um über erstmals hergestellte Epoxid-Inimere sauer spaltbare Einheiten in das Polyetherrückgrat einzuführen. Die neuen, verzweigten Strukturen wurden auf die Zersetzung in physiologisch relevantem Milieu untersucht. Die erzielte pH-abhängige Spaltbarkeit, kann für potenzielle Anwendungen beispielsweise in der Krebstherapie, von Vorteil sein.rn

Synthesis and Incorporation into PNA of Fluorinated Olefinic PNA (F-OPA) Monomers

A fluorinated OPA monomer containing the base thymine ((Z)-t-F-OPA) was synthesized in 12 steps, featuring a highly selective allylic over homoallylic Mitsunobu substitution for the introduction of the nucleobase. F-OPA modified PNA decamers were prepared by the MMTr/acyl protection strategy. The thermal stability of duplexes of PNA decamers containing (Z)-t-F-OPA units with antiparallel complementary DNA was measured. We found a strong dependence of stability from the sequential position of the (Z)-t-F-OPA units, ranging from ¢Tm of +2.4 to -8.1 °C/modification relative to unmodified PNA.

Distamycin-NA: A DNA Analog with an Aromatic Heterocyclic Polyamide Backbone. Part 1. Synthesis and structural analysis of monomers and dimers containing the nucleobase uracil

The synthesis of the monomeric building block 13 and its constitutional isomer 12 of a new type of DNA analog, distamycin-NA, is presented (Schemes 1 and 2). This building block consists of a uracil base attached to a thiophene core unit via a biaryl-like axis. Next to the biaryl-like axis on the thiophene chromophore, a carboxy and an amino substituent are located allowing for oligomerization via peptide coupling. The proof of constitution and the conformational preferences about the biaryl-like axis were established by means of X-ray analyses of the corresponding nitro derivatives 10 and 11. Thus, the uracil bases are propeller-twisted relative to the thiophene core, and bidentate H-bonds occur between two uracil bases in the crystals. The two amino-acid building blocks 12 and 13 were coupled to give the dimers 15 and 16 using dicyclohexylcarbodiimide (DCC) in THF/LiCl and DMF, respectively. While the dimer 15 showed no atropisomerism on the NMR time scale at room temperature, its isomer 16 occurred as distinct diastereoisomers due to the hindered rotation around its biaryl-like axis. Variable-temperature 1H-NMR experiments allowed to determine a rotational barrier of 19 ± 1 kcal/mol in 16. The experimental data were complemented by AM1 calculations.

Profilin Binding to Poly-l-Proline and Actin Monomers along with Ability to Catalyze Actin Nucleotide Exchange Is Required for Viability of Fission Yeast

We tested the ability of 87 profilin point mutations to complement temperature-sensitive and null mutations of the single profilin gene of the fission yeast Schizosaccharomyces pombe. We compared the biochemical properties of 13 stable noncomplementing profilins with an equal number of complementing profilin mutants. A large quantitative database revealed the following: 1) in a profilin null background fission yeast grow normally with profilin mutations having >10% of wild-type affinity for actin or poly-l-proline, but lower affinity for either ligand is incompatible with life; 2) in the cdc3-124 profilin ts background, fission yeast function with profilin having only 2–5% wild-type affinity for actin or poly-l-proline; and 3) special mutations show that the ability of profilin to catalyze nucleotide exchange by actin is an essential function. Thus, poly-l-proline binding, actin binding, and actin nucleotide exchange are each independent requirements for profilin function in fission yeast.

Cutin Monomers and Surface Wax Constituents Elicit H2O2 in Conditioned Cucumber Hypocotyl Segments and Enhance the Activity of Other H2O2 Elicitors1

Hypocotyls from etiolated cucumber (Cucumis sativus L.) seedlings were gently abraded at their epidermal surface and cut segments were conditioned to develop competence for H2O2 elicitation. Alkaline hydrolysates of cutin from cucumber, tomato, and apple elicited H2O2 in such conditioned segments. The most active constituent of cucumber cutin was identified as dodecan-1-ol, a novel cutin monomer capable of forming hydrophobic terminal chains. Additionally, the cutin hydrolysates enhanced the activity of a fungal H2O2 elicitor, similar to cucumber surface wax, which contained newly identified alkan-1,3-diols. The specificity of elicitor and enhancement activity was further elaborated using some pure model compounds. Certain saturated hydroxy fatty acids were potent H2O2 elicitors as well as enhancers. Some unsaturated epoxy and hydroxy fatty acids were also excellent H2O2 elicitors but inhibited the fungal elicitor activity. Short-chain alkanols exhibited good elicitor and enhancer activity, whereas longer-chain alkan-1-ols were barely active. The enhancement effect was also observed for H2O2 elicitation by ergosterol and chitosan. The physiological significance of these observations might be that once the cuticle is degraded by fungal cutinase, the cutin monomers may act as H2O2 elicitors. Corrosion of cutin may also bring surface wax constituents in contact with protoplasts and enhance elicitation.

Disruption of the aldolase A tetramer into catalytically active monomers.

The fructose-1,6-bisphosphate aldolase (EC 4.1.2.13) homotetramer has been destabilized by site-directed mutagenesis at the two different subunit interfaces. A double mutant aldolase, Q125D/E224A, sediments as two distinct species, characteristic of a slow equilibrium, with velocities expected for the monomer and tetramer. The aldolase monomer is shown to be catalytically active following isolation from sucrose density gradients. The isolated aldolase monomer had 72% of the specific activity of the wild-type enzyme and a slightly lower Michaelis constant, clearly indicating that the quaternary structure is not required for catalysis. Cross-linking of the isolated monomer confirmed that it does not rapidly reequilibrate with the tetramer following isolation. There was a substantial difference between the tetramer and monomer in their inactivation by urea. The stability toward both urea and thermal inactivation of these oligomeric variants suggests a role for the quaternary structure in maintaining the stability of aldolase, which may be an important role of quaternary structure in many proteins.

Two-hybrid system as a model to study the interaction of beta-amyloid peptide monomers.

The kinetics of amyloid fibril formation by beta-amyloid peptide (Abeta) are typical of a nucleation-dependent polymerization mechanism. This type of mechanism suggests that the study of the interaction of Abeta with itself can provide some valuable insights into Alzheimer disease amyloidosis. Interaction of Abeta with itself was explored with the yeast two-hybrid system. Fusion proteins were created by linking the Abeta fragment to a LexA DNA-binding domain (bait) and also to a B42 transactivation domain (prey). Protein-protein interactions were measured by expression of these fusion proteins in Saccharomyces cerevisiae harboring lacZ (beta-galactosidase) and LEU2 (leucine utilization) genes under the control of LexA-dependent operators. This approach suggests that the Abeta molecule is capable of interacting with itself in vivo in the yeast cell nucleus. LexA protein fused to the Drosophila protein bicoid (LexA-bicoid) failed to interact with the B42 fragment fused to Abeta, indicating that the observed Abeta-Abeta interaction was specific. Specificity was further shown by the finding that no significant interaction was observed in yeast expressing LexA-Abeta bait when the B42 transactivation domain was fused to an Abeta fragment with Phe-Phe at residues 19 and 20 replaced by Thr-Thr (AbetaTT), a finding that is consistent with in vitro observations made by others. Moreover, when a peptide fragment bearing this substitution was mixed with native Abeta-(1-40), it inhibited formation of fibrils in vitro as examined by electron microscopy. The findings presented in this paper suggest that the two-hybrid system can be used to study the interaction of Abeta monomers and to define the peptide sequences that may be important in nucleation-dependent aggregation.

Trans-dominant inhibitory human immunodeficiency virus type 1 protease monomers prevent protease activation and virion maturation.

Production of infectious human immunodeficiency virus (HIV) requires proper polyprotein processing by the dimeric viral protease. The trans-dominant inhibitory activity of a defective protease monomer with the active site Asp-25 changed to Asn was measured by transient transfection. A proviral plasmid that included the drug-selectable Escherichia coli gpt gene was used to deliver the wild-type (wt) or mutant proteases to cultured cells. Coexpression of the wt proviral DNA (HIV-gpt) with increasing amounts of the mutant proviral DNA (HIV-gpt D25N) results in a concomitant decrease in proteolytic activity monitored by in vivo viral polyprotein processing. The viral particles resulting from inactivation of the protease were mostly immature, consisting predominantly of unprocessed p55gag and p160gag-pol polyproteins. In the presence of HIV-1 gp160 env, the number of secreted noninfectious particles correlated with the presence of increasing amounts of the defective protease. Greater than 97% reduction in infectivity was observed at a 1:6 ratio of wt to defective protease DNA. This provides an estimate of the level of inhibition required for effectively preventing virion processing. Stable expression of the defective protease in monkey cells reduced the yield of infectious particles from these cells by 90% upon transfection with the wt proviral DNA. These results show that defective subunits of the viral protease exert a trans-dominant inhibitory effect resulting from the formation of catalytically compromised heterodimers in vivo, ultimately yielding noninfectious viral particles.

Polymerizable Peptide Monomers for the Targeted and Intracellular Delivery of Cancer Therapeutics

Thesis (Ph.D.)--University of Washington, 2016-06