Transmission of data under multipath transmission conditions

The explosive growth in microprocessor technology and the increasing use of computers to store information has increased the demand for data communication channels. Because of this, data communication to mobile vehicles is increasing rapidly. In addition, data communication is seen as a method of relieving the current congestion of mobile radio telephone bands in the U.K. Highly reliable data communication over mobile radio channels is particularly difficult to achieve, primarily due to fading caused by multipath interference. In this thesis a data communication system is described for use over radio channels impaired by multipath interference. The thesis first describes radio communication in general, and multipath interference In particular. The practical aspects of fading channels are stressed because of their importance in the development of the system. The current U.K. land mobile radio scene is then reviewed, with particular emphasis on the use of existing mobile radio equipment for data communication purposes. The development of the data communication system is then described. This system is microprocessor based and uses an advanced form of automatic request repeat (ARQ) operation. It can be configured to use either existing radio-telephone equipment, totally new equipment specifically designed for data communication, or any combination of the two. Due to its adaptability, the system can automatically optimise itself for use over any channel, even if the channel parameters are changing rapidly. Results obtained from a particular implementation of the system, which is described in full, are presented. These show how the operation of the system has to change to accomodate changes in the channel. Comparisons are made between the practical results and the theoretical limits of the system.

Capacity improvements for a direct-sequence code division multiple access network

The rapidly increasing demand for cellular telephony is placing greater demand on the limited bandwidth resources available. This research is concerned with techniques which enhance the capacity of a Direct-Sequence Code-Division-Multiple-Access (DS-CDMA) mobile telephone network. The capacity of both Private Mobile Radio (PMR) and cellular networks are derived and the many techniques which are currently available are reviewed. Areas which may be further investigated are identified. One technique which is developed is the sectorisation of a cell into toroidal rings. This is shown to provide an increased system capacity when the cell is split into these concentric rings and this is compared with cell clustering and other sectorisation schemes. Another technique for increasing the capacity is achieved by adding to the amount of inherent randomness within the transmitted signal so that the system is better able to extract the wanted signal. A system model has been produced for a cellular DS-CDMA network and the results are presented for two possible strategies. One of these strategies is the variation of the chip duration over a signal bit period. Several different variation functions are tried and a sinusoidal function is shown to provide the greatest increase in the maximum number of system users for any given signal-to-noise ratio. The other strategy considered is the use of additive amplitude modulation together with data/chip phase-shift-keying. The amplitude variations are determined by a sparse code so that the average system power is held near its nominal level. This strategy is shown to provide no further capacity since the system is sensitive to amplitude variations. When both strategies are employed, however, the sensitivity to amplitude variations is shown to reduce, thus indicating that the first strategy both increases the capacity and the ability to handle fluctuations in the received signal power.

Uplink Performance of Conventional and Massive MIMO Cellular Systems with Delayed CSIT

This work studies the uplink of a cellular network with zero-forcing (ZF) receivers under imperfect channel state information at the base station. More specifically, apart from the pilot contamination, we investigate the effect of time variation of the channel due to the relative users' movement with regard to the base station. Our contributions include analytical expressions for the sum-rate with finite number of BS antennas, and also the asymptotic limits with infinite power and number of BS antennas, respectively. The numerical results provide interesting insights on how the user mobility degrades the system performance which extends previous results in the literature.

The Influence of Propagation Model and Sectorization over WCDMA Capacity

In this paper we use a dynamic model that we have developed for WCDMA capacity analysis using MATLAB and a GIS based planning tool, to estimate the capacity of a mobile system under different conditions like number of cells, propagation model, sectorization and handover margin.

Factores que afectan la capacidad en WCDMA y su influencia en la planificación de sistemas de tercera generación

In this paper we use a model that we have developed for CDMA capacity analysis to see how different conditions like propagation model, number of cells and overlapping affect the estimation of CDMA capacity. We will show that the overlapping is not a direct parameter that affect capacity, and there are other factors to consider.

Análisis de capacidad en sistemas CDMA y WCDMA, usando herramientas de planificación basadas en GIS y dinámica poliédrica

En este momento están entrando en operación los primeros sistemas UMTS en Europa, y están operando en varios países del mundo sistemas CDMA-2000 1xRTT, y aunque existen muchos trabajos publicados sobre la capacidad de estos sistemas, prácticamente todo lo existente se basa en el comportamiento de sistemas ideales que consideran celdas hexagonales o circulares y propagación basada en exponente inverso de la distancia y poco es lo que hay sobre el comportamiento real de dichos sistemas en entornos reales.

Sobre el exponente de pérdidas de propagación, es bien conocido que este afecta la capacidad de los sistemas CDMA; sin embargo hasta ahora no se ha considerado el efecto de los modelos de propagación que tienen en cuenta la difracción y otros fenómenos más cercanos a la realidad, y por lo tanto no se ha considerado el efecto del entorno urbano y el terreno sobre la capacidad real de los sistemas basados en CDMA.

A probabilistic approach to user mobility prediction for wireless services.

Mobile and wireless networks have long exploited mobility predictions, focused on predicting the future location of given users, to perform more efficient network resource management. In this paper, we present a new approach in which we provide predictions as a probability distribution of the likelihood of moving to a set of future locations. This approach provides wireless services a greater amount of knowledge and enables them to perform more effectively. We present a framework for the evaluation of this new type of predictor, and develop 2 new predictors, HEM and G-Stat. We evaluate our predictors accuracy in predicting future cells for mobile users, using two large geolocation data sets, from MDC [11], [12] and Crawdad [13]. We show that our predictors can successfully predict with as low as an average 2.2% inaccuracy in certain scenarios.

Implémentation sur FPGA de l’algorithme MUSIC sur antenne-réseau expérimentale à 10 GHz

Les techniques des directions d’arrivée (DOA) sont une voie prometteuse pour accroitre la capacité des systèmes et les services de télécommunications en permettant de mieux estimer le canal radio-mobile. Elles permettent aussi de suivre précisément des usagers cellulaires pour orienter les faisceaux d’antennes dans leur direction. S’inscrivant dans ce contexte, ce présent mémoire décrit étape par étape l’implémentation de l’algorithme de haut niveau MUSIC (MUltiple SIgnal Classification) sur une plateforme FPGA afin de déterminer en temps réel l’angle d’arrivée d’une ou des sources incidentes à un réseau d’antennes. Le concept du prototypage rapide des lois de commande (RCP) avec les outils de XilinxTM System generator (XSG) et du MBDK (Model Based Design Kit) de NutaqTM est le concept de développement utilisé. Ce concept se base sur une programmation de code haut niveau à travers des modèles, pour générer automatiquement un code de bas niveau. Une attention particulière est portée sur la méthode choisie pour résoudre le problème de la décomposition en valeurs et vecteurs propres de la matrice complexe de covariance par l’algorithme de Jacobi. L’architecture mise en place implémentant cette dernière dans le FPGA (Field Programmable Gate Array) est détaillée. Par ailleurs, il est prouvé que MUSIC ne peut effectuer une estimation intéressante de la position des sources sans une calibration préalable du réseau d’antennes. Ainsi, la technique de calibration par matrice G utilisée dans ce projet est présentée, en plus de son modèle d’implémentation. Enfin, les résultats expérimentaux du système mis à l’épreuve dans un environnement réel en présence d’une source puis de deux sources fortement corrélées sont illustrés et analysés.

Uniradio Cesena: Progettazione ed implementazione di una Mobile App per Web radio.

L'avvento delle nuove tecnologie e dei nuovi terminali Smartphone, ha portato ad una sempre più ampia implementazioni di applicazioni mobile. L'obiettivo di questa tesi è quello di illustrare il processo di progettazione ed implementazione di una mobile App per la Web Radio degli studenti universitari di Cesena: Uniradio Cesena.

Operator's manual : terminal, radio-telephone, mobile subscriber AN/VRC-97 (NSN 5820-01-246-6818) and installation kit, electronic equipment MK-2564/VRC-97 and MK-2565/VRC-97 (NSN 5820-01-246-6873).

"1 March 1989."

Radio - Mobile Unit #1 - Pack Set - Equipment

1 of 7

Radio - Mobile Unit #1 - Pack Set - Equipment

2 of 7

Radio - Mobile Unit #1 - Pack Set - Equipment

3 of 7

Radio - Mobile Unit #1 - Pack Set - Equipment

4 of 7