Effects of carbon dioxide feeding rate and light intensity on the fed-batch pulse-feeding cultivation of Spirulina platensis in helical photobioreactor

The behavior of S. platensis was investigated in this study through fed-batch pulse-feeding cultures performed at different carbon dioxide feeding rates (F = 0.44-1.03 g L-1 d(-1)) and photosynthetic photon flux density (PPFD = 80-250 mu mol photons m(-2) s(-1)) in a bench-scale helical photobioreactor. To achieve this purpose, an inorganic medium lacking the carbon source was enriched by gaseous carbon dioxide from a cylinder. The maximum cell concentration achieved was 12.8 g L-1 at PPFD = 166 mu mol photons m(-2) s(-1) and F= 0.44 g L-1 d(-1) of CO2. At PPFD = 80 and 125 mu mol photons m(-2) s(-1), the carbon utilization efficiency (CUE) reached maximum values of 50 and 69%, respectively, after about 20 days, and then it decreased, thus highlighting a photolimitation effect. At PPFD = 166 mu mol photons m(-2) s(-1), CUE was >= 90% between 20 and 50 days. The photosynthetic efficiency reached its maximum value (9.4%) at PPFD = 125 mu mol photons m(-2) s(-1). The photoinhibition threshold appeared to strongly depend on the feeding rate: at high PPFD, an increase in the amount of fed CO2 delayed the inhibitory effect on biomass growth, whereas at low PPFD, excess CO2 addition caused the microalga to stop growing. (c) 2007 Elsevier B.V. All rights reserved.

Non-uniform printed antenna array for wireless communications in sports arenas

Wireless communications had a great development in the last years and nowadays they are present everywhere, public and private, being increasingly used for different applications. Their application in the business of sports events as a means to improve the experience of the fans at the games is becoming essential, such as sharing messages and multimedia material on social networks. In the stadiums, given the high density of people, the wireless networks require very large data capacity. Hence radio coverage employing many small sized sectors is unavoidable. In this paper, an antenna is designed to operate in the Wi-Fi 5GHz frequency band, with a directive radiation pattern suitable to this kind of applications. Furthermore, despite the large bandwidth and low losses, this antenna has been developed using low cost, off-the-shelf materials without sacrificing quality or performance, essential to mass production. © 2015 EurAAP.

Dual-phase inkjet printed electrochromic layers based on PTA and WOX/TiO2 nanoparticles for electrochromic applications

Thesis submitted in Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa for the degree of Master in Materials Engineering

Cryo-Microtome sections of coproculture larvae of Strongyloides stercoralis and Strongyloides ratti as antigen sources for the immunodiagnosis of human strongyloidiasis

Cryo-microtome sections of larvae of Strongyloides stercoralis and S. ratti respectively obtained from human and rat feces cultures, were used as antigens. Fluoresceinate conjugates against human IgG were employed at the ideal titer of 10 for S. stercoralis and 100 for S. ratti. The sensitivity of the indirect immunofluorescence reaction (IIF) was 94.4% and 92.5% and the specificity 94.2% and 97.1% for the two specific larval antigens, respectively. Sera from 123 persons (54 from carriers of S. stercoralis infections and 69 from controls) were submitted to the reaction. The titers of different sera varied from 20 to 2560. There was a significant linear correlation (r = 0.85 p £ 0.001) between the antibodies from the two species of larval antigens. We conclude that both antigens may be used in the IIF reaction for the diagnosis of human strongyloidiasis. Due to the feasibility of safe and low-cost mass production of S. ratti larvae in the laboratory with a considerable economy of conjugate, their utilization in the serum diagnosis of human strongyloidiasis is recommended

Comunicações marítimas wi-fi usando a banda 5.8 ghz

Tendo em conta a popularidade que as comunicações Wi-Fi têm na atualidade em vários dispositivos como computadores portáteis, telemóveis ou tablets, sendo estes utilizados praticamente por qualquer pessoa, surgiu a ideia de utilizar esta tecnologia de baixo custo e isenta de licenciamento num cenário de comunicações marítimas. Neste contexto, esta permite fornecer o acesso à Internet em banda larga a grupos de embarcações, que atualmente recorrem a tecnologias de elevado custo (satélite) e/ou de banda estreita (rádios VHF). Com o acesso em banda larga, os proprietários poderão utilizar aplicações informáticas de interesse à atividade de negócio ou de lazer, até então só disponíveis junto à costa onde existe cobertura celular. Nesta tese pretende-se fazer um estudo teórico e prático sobre o alcance e respetivo desempenho de comunicações de banda larga em ambiente marítimo, utilizando parte da gama de frequências dos 5,8 GHz, isenta de licença, e a norma IEEE 802.11n. Para se utilizar equipamento produzido em massa a operar nessa gama, existem duas normas disponíveis, a IEEE 802.11a e a IEEE 802.11n. Optou-se pelo IEEE 802.11n pois os esquemas de codificação ao nível físico permitem débitos mais elevados e MIMO. Para a realização dos testes experimentais, foi necessário elaborar um protótipo de comunicação ponto a ponto, constituído por dois nós de comunicação. Um deles foi instalado numa embarcação de pesca em colaboração com a Associação Propeixe e o outro no Edifício Transparente, no Porto, em colaboração com a entidade gestora do edifício e a Associação Porto Digital. Tanto quanto se conhece é o primeiro teste de comunicações Wi-Fi realizado nestas condições a nível mundial. Os objetivos do trabalho foram atingidos. Foi possível estabelecer comunicações Wi-Fi na banda dos 5,8 GHz até cerca de 7 km com débito médio mínimo de 1 Mbit/s. O ambiente de testes desenvolvido e os resultados obtidos servirão de base para futuros trabalhos de investigação na área das comunicações marítimas.

An agent based architecture to support monitoring in plug and produce manufacturing systems using knowledge extraction

In recent years a set of production paradigms were proposed in order to capacitate manufacturers to meet the new market requirements, such as the shift in demand for highly customized products resulting in a shorter product life cycle, rather than the traditional mass production standardized consumables. These new paradigms advocate solutions capable of facing these requirements, empowering manufacturing systems with a high capacity to adapt along with elevated flexibility and robustness in order to deal with disturbances, like unexpected orders or malfunctions. Evolvable Production Systems propose a solution based on the usage of modularity and self-organization with a fine granularity level, supporting pluggability and in this way allowing companies to add and/or remove components during execution without any extra re-programming effort. However, current monitoring software was not designed to fully support these characteristics, being commonly based on centralized SCADA systems, incapable of re-adapting during execution to the unexpected plugging/unplugging of devices nor changes in the entire system’s topology. Considering these aspects, the work developed for this thesis encompasses a fully distributed agent-based architecture, capable of performing knowledge extraction at different levels of abstraction without sacrificing the capacity to add and/or remove monitoring entities, responsible for data extraction and analysis, during runtime.

Inkjet printing technology for flexible pressure sensors

Tese de Doutoramento Ciência e Engenharia de Polímeros e Compósitos.

Development of advanced cell/tissue culture systems, based on enhanced polymeric scaffolds and sophisticated bioreactors, for tissue engineering applications

Programa Doutoral em Engenharia Biomédica

Absorção de zinco pela cana de açúcar, Co 419, em função da idade

The status of zinc in sugar cane, variety Co 419, troughout its life cyle, was studid in samples cut monthly, from the 6th to 15th month, from an experiment carried on under the conditions of soil and climate prevailing in Piracicaba, State of São Paulo, Brazil. The experiment consisted of 6plots, 3 fertilized and 3 unfertilized. The fertilized ones received 40 kg of N (ammonium sulfate), 100 kg P2O5 (superphosphate) and 40 kg K2O (potassium cloride) per hectare, just before planting. The zinc content was determined by the Zincon method, after separation of zinc from other ions by means of the ion Exchange Resin III, Merck. The results obtained show that there was a tendency to decrease the zinc level in the stalks, whereas it kept more or less constant in the leaves; there was an exception in January, when the zinc level in the stalks had a sharp raise: 38-90-20 and 28-60-23 ppm for the fertilized an unfertilized treatments. There was a parallelism in the absorption of zinc by the plants from 4 hills of both treatments, through the whole - plantcycle but, the total amount taken up was higher with the fertilized plot due to its greater mass production.

Clúster creatius en entorns urbans: 22@Bcn i Shoreditch East London

La localització de les empreses de nova economia en zones urbanes, a pesar que el factor distància no sigui important, no deixa de ser considerable pels seus avantatges que els suposa estar situades conjuntament en relació amb les infraestructures, consum, beneficis socioculturals, i facilitat en les transaccions cara a cara. És inevitable que el primer quart del segle vint-i-un estigui lligat a l’economia creativa de forma similar amb que el començament del segle vint estava íntimament lligat a l’economia industrial i la invenció del sistema de producció en massa. La ciutat també va jugar un dels papers més importants per al desenvolupament de “la nova economia industrial” a les albors del segle vint, com ho és la ciutat del coneixement que acull “la nova economia creativa” al segle vint-i-un. És evident que els resultats morfològics, socials, econòmics i urbans són ben diferents en ambdós fenòmens, però l’impacte a les ciutats és molt gran. L’objectiu d’aquest estudi és analitzar els mecanismes d’aglomeració (clustering) d’activitats competitives basades en creació de coneixement i de serveis avançats que estan al darrera de desenvolupaments punters a ciutats com Barcelona, el projecte 22@bcn, i East London, el projecte Shoreditch. L’esforç que han posat les autoritats locals en crear l’entorn apropiat per atreure i crear empreses innovadores, com a motor de desenvolupament d’algunes ciutats modernes europees ha resultat en el sorgiment de nuclis o centres urbans molt dinàmics que suposadament estan preparats i acullen punts de creació de coneixement (“Urban Knowledge Hubs”), amb una demanda i llocs de treball altament qualificats. Aquest és el cas dels projectes de Barcelona (22@bcn) i East London (Shoreditch).

Fecundity of Biomphalaria straminea and B. glabrata in the laboratory: a twelve-month comparative study

In the present comparative study a Biomphalaria straminea sample from Picos (Piauí) showed expressive advantages related to fecundity over a B. glabrata sample from Belo Horizonte (Minas Gerais) such as: higher egg-mass production in 10 out of 12 months of study; higher egg production in all months of study; higher egg per egg-mass ratio in 11 out of 12 months of study; 66% of the egg-masses containing more than 20 eggs while in B. glabrata 70% of the egg-masses showed less than 20 eggs; three times less empty egg capsules than B. glabrata; attainning maximum fecundity in half the time required by B. glabrata. Mortality however was higher and sooner in B. straminea, suggesting higher semelparity in this species than in B. glabrata, a possibility that requires confirmation through long-term studies with other samples of both species. This first finding of a B. straminea sample more fecund than B. glabrata is discussed in relation to other data from the literature, and some recommendations are made on the quantification of fecundity of planorbid snails.

Annual variation in the biochemical composition of newly hatched larvae of Maja brachydactyla in captivity

Quality of newly hatched larvae (NHL) of Maja brachydactyla in captivity has been characterized throughout the year to evaluate their availability for mass production. Spawning took place every month and NHL were collected and analyzed to estimate individual dry weight (DW) and proximate biochemical composition (protein, carbohydrate and lipids). Lipid class, fatty acid composition, amino acid profile, mineral and vitamins A, E and C contents were analyzed seasonally. NHL obtained throughout the year are a potential source for aquaculture purposes, since the increment in the relative protein and lipid (especially phospholipids and n-3 PUFA) content might compensate the decrease in DW of larvae hatched from broodstock kept during one year in captivity. However, the decrease in vitamins A and E as well as in certain essential amino acids (Lys, Val, and His) and trace elements (Cu and Fe) of NHL at the end of the year might be indicative of a nutritional deficiency in broodstock diets.

Biological characteristics and parasitism capacity of Trichogramma pretiosum Riley (Hymenoptera, Trichogrammatidae) on eggs of Spodoptera frugiperda (J. E. Smith) (Lepidoptera, Noctuidae)

This study aimed at evaluating the biological characteristics and the capacity of parasitism of a Trichogramma pretiosum Riley, 1869 (Hymenoptera, Trichogrammatidae) strain (T. pretiosum RV) collected in Rio Verde County, State of Goiás, Brazil. The study was carried out on eggs of Spodoptera frugiperda (J. E. Smith, 1797) (Lepidoptera, Noctuidae) and conducted under controlled environmental conditions at different constant temperatures. The biological parameters determined were: developmental time (egg-adult; days); emergence (%); sex ratio; number of progeny/egg; number of generation/year; thermal constant (K); temperature threshold (Tb); daily number of parasitized eggs; cumulative parasitism (%); total number of eggs parasitized by T. pretiosum; and female longevity. To study the T. pretiosum parasitism capacity, 20 S. frugiperda eggs (< 24 h old) were placed into 8.0 cm x 2.0 cm glass vials containing one female (< 24 h old) each. Trials were carried out in a completely randomized experimental design, with 20 replications at each temperature. The environmental chambers (BOD type) were set at 18ºC, 20ºC, 22ºC, 25ºC, 28ºC and 32ºC ± 1ºC, 70 ±10% relative humidity, and 14/10 h (L:D) photoperiod. The eggs of S. frugiperda were replaced daily until parasitoid death. Results have shown an inverse correlation between developmental time and temperature, with statistically significant differences among means, except at 25ºC and 28ºC (10 days). Parasitoid emergence (%) was also influenced by temperature. The lowest percent emergence was observed at 32ºC, and the highest ones at 18ºC and 20ºC temperatures. The temperature did not affect T. pretiosum sex ratio and number of parasitoids per egg, thus allowing changes in the temperature to control insect mass production in the laboratory to meet the needs for field releases.

New method for rearing Spodoptera frugiperda in laboratory shows that larval cannibalism is not obligatory

New method for rearing Spodoptera frugiperda in laboratory shows that larval cannibalism is not obligatory. Here we show, for the first time, that larvae of the fall armyworm (FAW), Spodoptera frugiperda (Lepidoptera, Noctuidae), can be successfully reared in a cohort-based manner with virtually no cannibalism. FAW larvae were reared since the second instar to pupation in rectangular plastic containers containing 40 individuals with a surprisingly ca. 90% larval survivorship. Adult females from the cohort-based method showed fecundity similar to that already reported on literature for larvae reared individually, and fertility higher than 99%, with the advantage of combining economy of time, space and material resources. These findings suggest that the factors affecting cannibalism of FAW larvae in laboratory rearings need to be reevaluated, whilst the new technique also show potential to increase the efficiency of both small and mass FAW rearings.

Investigation of the Loss of Prestress in Prestressed Concrete Beams due to Steam Curing, HR-62, 1961

Mass production of prestressed concrete beams is facilitated by the accelerated curing of the concrete. The ·method most commonly used for this purpose is steam curing at atmospheric pressure. This requires concrete temperatures as high as 150°F. during the curing period. Prestressing facilities in Iowa are located out of doors. This means that during the winter season the forms are set and the steel cables are stressed at temperatures as low as 0°F. The thermal expansion of the prestressing cables should result in a reduction of the stress which was placed in them at the lower temperature. If the stress is reduced in the cables, then the amount of prestress ultimately transferred to the concrete may be less than the amount for which the beam was designed. Research project HR-62 was undertaken to measure and explain the difference between the initial stress placed in the cables and the actual stress which is eventually transferred to the concrete. The project was assigned to the Materials Department Laboratory under the general supervision of the Testing Engineer, Mr. James W. Johnson. A small stress bed complete with steam curing facilities was set up in the laboratory, and prestressed concrete beams were fabricated under closely controlled conditions. Measurements were made to determine the initial stress in the steel and the final stress in the concrete. The results of these tests indicate that there is a general loss of prestressing force in excess of that caused by elastic shortening of the concrete. The exact amount of the loss and the identification of the factors involved could not be determined from this limited investigation.