Typographic layout and first impressions: testing how changes in text layout influence reader's judgments of documents

This study explores how the typographic layout of information influences readers' impressions of magazine contents pages. Thirteen descriptors were used in a paired comparison procedure that assessed whether participants' rhetorical impressions of a set of six controlled documents change in relation to variations in layout. The combinations of layout attributes tested were derived from the structural attributes associated with three patterns of typographic differentiation (high, moderate, and low) described in a previous study (see Moys, 2014). The content and the range of stylistic attributes applied to the test material were controlled in order to focus on layout attributes. Triangulation of the quantitative and qualitative data indicates that, even within the experimental confines of limited stylistic differentiation, the layout attributes associated with patterns of high, moderate, and low typographic differentiation do influence readers' rhetorical judgments. In addition, the findings emphasize the importance of considering inter-relationships between clusters of typographic attributes rather than testing isolated variables.

Werv Magazine : layout och koncept av ett nytt livsstilsmagasin för tjejer inom brädsporter.

Currently there is no Swedish boardsport magazine for women. In this degree project a prototype of a new lifestyle magazine for women in boardsports has been created. Through a magazine study and a targetgroup survey we have found a magazine concept and suggestions for the magazine content. A digital 96-page prototype has been created. The feedback from Anders Neuman-Östberg, the experienced editor in chief of the Swedish boardsport magazine Transistion gives the project report the needed credibility.The overall response from all the people involved in the making of this prototype has been positive. We can see a market demand for a magazine like Werv and hope that we can find a way to publish it in the future. In this degree project we haven't looked into the economic sustainability and therefore we can't say if it's feasible. Further investigations are needed before Werv can be published.

Photovoltaic System Design for a Contaminated Area in Falun – Comparison of South and East- West Layout

In this thesis the solar part of a large grid-connected photovoltaic system design has been done. The main purpose was to size and optimize the system and to present figures helping to evaluate the prospective project rationality, which can potentially be constructed on a contaminated area in Falun. The methodology consisted in PV market study and component selection, site analysis and defining suitable area for solar installation; and system configuration optimization based on PVsyst simulations and Levelized Cost of Energy calculations. The procedure was mainly divided on two parts, preliminary and detailed sizing. In the first part the objective was complex, which included the investigation of the most profitable component combination and system optimization due to tilt and row distance. It was done by simulating systems with different components and orientations, which were sized for the same 100kW inverter in order to make a fair comparison. For each simulated result a simplified LCOE calculation procedure was applied. The main results of this part show that with the price of 0.43 €/Wp thin-film modules were the most cost effective solution for the case with a great advantage over crystalline type in terms of financial attractiveness. From the results of the preliminary study it was possible to select the optimal system configuration, which was used in the detailed sizing as a starting point. In this part the PVsyst simulations were run, which included full scale system design considering near shadings created by factory buildings. Additionally, more complex procedure of LCOE calculation has been used here considered insurances, maintenance, time value of money and possible cost reduction due to the system size. Two system options were proposed in final results; both cover the same area of 66000 m2. The first one represents an ordinary South faced design with 1.1 MW nominal power, which was optimized for the highest performance. According to PVsyst simulations, this system should produce 1108 MWh/year with the initial investment of 835,000 € and 0.056 €/kWh LCOE. The second option has an alternative East-West orientation, which allows to cover 80% of occupied ground and consequently have 6.6 MW PV nominal power. The system produces 5388 MWh/year costs about 4500,000 € and delivers electricity with the same price of 0.056 €/kWh. Even though the EW solution has 20% lower specific energy production, it benefits mainly from lower relative costs for inverters, mounting and annual maintenance expenses. After analyzing the performance results, among the two alternatives none of the systems showed a clear superiority so there was no optimal system proposed. Both, South and East-West solutions have own advantages and disadvantages in terms of energy production profile, configuration, installation and maintenance. Furthermore, the uncertainty due to cost figures assumptions restricted the results veracity.

Layout och typografi i vetenskapliga artiklar : En kartläggning av konventioner gällande grafisk formgivning inom matematik, medicin och utbildningsvetenskap

En deskriptiv visuell innehållsanalys genomfördes med en korpus bestående av vetenskapliga artiklar från 30 topprankade tidskrifter jämnt fördelade på de tre disciplinerna matematik, medicin och utbildningsvetenskap, med syfte att undersöka om det fanns ett samband mellan tidskrifternas disciplintillhörighet och den grafiska formgivningen. Kartläggningen omfattade layout (bl.a. sidformat, spalter, marginalstorlek, användning av grafiska element, placering av tabeller, figurer och pagina) och typografiskt utseende hos titel, rubriker, brödtext och abstrakt (t.ex. teckenstorlek, textjustering, teckengrovlek, typsnitt, färg och radavstånd). Resultaten visar att disciplinerna använde olika men även gemensamma konventioner i sitt grafiska utseende. Matematik uppvisade enkelspaltig layout med liten typografisk variation, genomgående användning av typsnitt från familjen Transitional eller Transitional/Didone för hela dokumentet, avsaknad av kulört färg och sällan användning av grafiska element. Medicin uppvisade större variation med användning av kulört färg, icke-centrerad typografi med både sansseriff- och seriff-typsnitt, grafiska element och ramar som förstärker det ofta använda dubbelspaltiga gridsystemet. Utbildningsvetenskap uppvisade en grafisk design som återfanns i båda disciplinerna, men påminde mest om matematik till utseendet. Kodbok ingår i sin helhet som bilaga. Uppsatsen i sig är delvis formgiven med utgångspunkt i de erhållna resultaten.

The impact of cell formation on layout designs in cellular manufacturing

This paper provides a procedure to address all three phases of the design for cellular manufacturing namely parts/machines grouping, intra-cell and inter-cell layout designs concurrently. It provides a platform to investigate the impact of the cell formation method on intracell and inter-cell layout designs and vice versa by generating multiple efficient layout designs for different cell partitioning strategies. This approach enables the decision maker to have wider choices with regard to the different number of cells and to assess various criteria such as travelling cost, duplication of machines, space requirement against each alternative. The performance of the model is demonstrated by applying it to an example selected from literature.

Convert meets KIELER: integrating advanced layout algorithms into by-example visualisations

The CONcrete Visual assistEd Transformation (CONVErT) framework provides facilities to generate reusable notations and compose them to form a wide variety of visual-isations. With an increased number of notations in large scale visualisations, it is crucial to use advanced layout algorithms to improve understandability of such complex visualisations. This showpiece paper demonstrates how advanced layout algorithms can be integrated into the notation specifications of CONVErT to generate layouts of complex visualisations.

Análise e melhoria de layout de processo na indústria de beneficiamento de couro

A aplicação de técnicas de estudo de sistemas em ambientes industriais com grande concorrência, é cada vez mais significativa devido às modificações e flexibilidade de produção exigidas. A aplicação de técnicas de análise e ajustes de layouts são algumas destas técnicas que podem trazer resultados competitivos positivos. O presente trabalho descreve os tipos de layouts existentes, com suas aplicações, vantagens e desvantagens com a finalidade de analisar e propor melhorias em layouts de processo na indústria coureira. O trabalho enfoca ainda os principais pontos a serem considerados quando da criação de um novo layout ou do ajuste e/ou melhoria de um existente. Para tal, foi realizado um estudo de caso utilizando a técnica de Melhoria de Layout de Silveira (1998), com a aplicação do Planejamento Sistemático de Layout em um layout de processo do setor da Secagem, característico em uma indústria beneficiadora de couro. Os resultados obtidos traduzem o re-arranjo de seus postos de trabalho com redução do fluxo de material de acordo com a aproximação de postos com relações de afinidade. Essa alteração possibilitou uma melhor organização espacial dos postos de trabalho e um melhor controle da produção, através da separação natural dos lotes. A metodologia adotada pode ser utilizada como ferramenta de melhoria nos demais setores, tanto da própria empresa, como do mercado coureiro em geral.

Avaliação de um layout celular implementado : um estudo de caso em uma indústria de autopeças

Resumo não disponível.

Uma abordagem para projetos de layout industrial em sistemas de produção enxuta : um estudo de caso

Resumo não disponível.