856 resultados para Light intensities
Resumo:
Soybean (Glycine ~ (L.) Merr. cv. Harosoy 63) plants inoculated with Rhizobium japonicum were grown in vermiculite in the presence or absence of nitrate fertilization for up to 6 weeks after planting. Overall growth of nodulated plants was enhanced in the presence of nitrate fertilization, while the extent of nodule development was reduced. Although the number of nodules was not affected by nitrate fertilization when plants were grown at a light intensity limiting for photosynthesis, at light intensities approaching or exceeding the light saturation point for photosynthesis, nitrate fertilization resulted in at least a 30% reduction in nodule numbers. The mature, first trifoliate leaf of 21 day old plants was allowed to photoassimi1ate 14C02. One hour after·· the initial exposure to 14C02, the , plants were harvested and the 14C radioactivity was determined in the 80% ethanol-soluble fraction: in. o:rider to assess· "the extent of photoassimilate export and the pattern of distribution of exported 14C. The magnitude of 14C export was not affected by the presence of nitrate fertilization. However, there was a significant effect on the distribution pattern, particularly with regard to the partitioning of 14C-photosynthate between the nodules and the root tissue. In the presence of nitrate fertilization, less than 6% of the exported 14C photosynthate was recovered from the nodules, with much larger amounts (approximately 37%) being recovered from the root tissue. In the absence of nitrate fertilization, recovery of exported 14C-photosynthate from the nodules (19 to 27%) was approximately equal to that from the root tissue (24 to 33%). By initiating- or terminating the applications of nitrate at 14 days of age, it was determined that the period from day 14 to day 21 after planting was particularly significant for the development of nodules initiated earlier. Addition of nitrate fertilization at this time inhibited further nodule development while stimulating plant growth, whereas removal of nitrate fertilization stimulated nodule development. The results obtained are consistent with the hypothesis that nodule development is inhibited by nitrate fertilization through a reduction in the availability of photosynthate to the nodules.
Resumo:
Bloom-forming and toxin-producing cyanobacteria remain a persistent nuisance across the world. Modelling of cyanobacteria in freshwaters is an important tool for understanding their population dynamics and predicting the location and timing of the bloom events in lakes and rivers. In this article, a new deterministic model is introduced which simulates the growth and movement of cyanobacterial blooms in river systems. The model focuses on the mathematical description of the bloom formation, vertical migration and lateral transport of colonies within river environments by taking into account the four major factors that affect the cyanobacterial bloom formation in freshwaters: light, nutrients, temperature and river flow. The model consists of two sub-models: a vertical migration model with respect to growth of cyanobacteria in relation to light, nutrients and temperature; and a hydraulic model to simulate the horizontal movement of the bloom. This article presents the model algorithms and highlights some important model results. The effects of nutrient limitation, varying illumination and river flow characteristics on cyanobacterial movement are simulated. The results indicate that under high light intensities and in nutrient-rich waters colonies sink further as a result of carbohydrate accumulation in the cells. In turbulent environments, vertical migration is retarded by vertical velocity component generated by turbulent shear stress. (c) 2006 Elsevier B.V. All rights reserved.
Resumo:
Os efeitos individuais e interativos dos parâmetros ambientais físicos e químicos, como temperatura, intensidade luminosa, salinidade e concentração de fósforo inorgânico dissolvido na água do mar, na produção de proteínas, carboidratos, acúmulo de fósforo tecidual e taxa de absorção do fósforo inorgânico disponível no meio de cultura em Gelidium crinale (Turner) Lamouroux, foram investigados durante um período de sete dias de cultivo laboratorial, em condições controladas. A ação dos parâmetros abióticos foi analisada de três maneiras diferentes. A primeira avaliação integrou a ação de temperatura, intensidade luminosa e fósforo inorgânico dissolvido, mantendo-se fixa a salinidade em 25 ups, onde se constatou que em todos os componentes químicos algais ocorreram interações de terceira ordem. O incremento de 2,28 a 2,67 % nos teores de proteínas foram obtidos à temperatura de 25 °C e 12 μmol m-2 s-1 de intensidade luminosa, diminuindo com a elevação da intensidade luminosa para 40 μmol m-2 s-1. Para carboidratos, ocorreram interações significativas entre os três parâmetros, com um aumento de 6,85 % sendo registrado a 25 °C de temperatura, 24 μmol m-2 s-1 de intensidade luminosa e 10,0 μM de fósforo inorgânico. O aumento máximo na taxa de fósforo tecidual (0,56 %) ocorreu em talos cultivados nas menores temperatura e intensidade luminosa e na maior concentração de fósforo inorgânico dissolvido. Com relação à intensidade luminosa, foi observada uma correlação negativa entre proteínas e carboidratos. A segunda avaliação estabeleceu a ação independente e sinérgica de temperatura, salinidade e fósforo inorgânico disponível no meio de cultivo, fixando-se a intensidade luminosa em 24 μmol m-2s-1. A maior produção de proteínas ocorreu em cultivos onde a temperatura foi de 25 °C, com uma concentração de 5,0 e 10,0 μM de fósforo inorgânico dissolvido e salinidade entre 15 e 20 ups, cujos valores médios do incremento variaram entre 2,62 a 2,83 % peso seco de alga, resultando em uma interação de terceira ordem altamente significativa. Para carboidratos a elevação de 6,85 % em sua concentração está associada à maior temperatura (25 °C), maior salinidade (25 ups) e maior quantidade de fósforo inorgânico disponível no meio de cultivo (10,0 μM). Contudo, não foi observada uma interação de terceira ordem através da análise estatística. Para esta biomolécula observaram-se interações de segunda ordem altamente significativa (P < 0,005) entre temperatura e diferentes concentrações de fósforo inorgânico e entre temperatura e salinidade (P < 0,000). O acúmulo de fósforo nos talos da alga foi menor durante os cultivos em que a salinidade foi de 25 ups,nas temperaturas de 20 e 25 °C e concentração de fósforo disponível de 2,5 μM, com percentuais entre 0,08 a 0,11 % em peso de cinzas. O maior incremento ocorreu na menor temperatura, associada à baixa salinidade e alta concentração de fósforo inorgânico no meio. O coeficiente de correlação de Pearson revelou correlações positivas, altamente significativas (P < 0,001) entre teor de proteína, temperatura e disponibilidade de fósforo inorgânico no meio de cultivo. Para carboidratos, as correlações foram positivas com os três parâmetros abióticos. Para fósforo tecidual somente com o fósforo inorgânico disponível no cultivo foi que ocorreu uma relação positiva; com os outros dois parâmetros esta correlação foi negativa. Entre os componentes químicos encontrados nas algas, proteínas e carboidratos apresentaram uma relação positiva, porém fósforo tecidual apresentou uma correlação negativa com ambos, embora com proteínas esta relação não tenha sido significativa. A terceira avaliação estudou a ação individual e o sinergismo entre os parâmetros ambientais, temperatura, intensidade luminosa e salinidade, a uma concentração fixa de fósforo inorgânico disponível no meio de cultivo (10,0 μM), sobre a composição química, bem como na taxa de absorção de fósforo inorgânico disponível. Observou-se a ocorrência de interações de terceira ordem em todos as variáveis estudadas. O teor de proteínas apresentou um aumento de 3,72 % durante o período de cultivo, passando de 20,63 % antes do cultivo, para 24,35 % após o término do experimento, principalmente nas condições de 25 °C de temperatura, 12 μmol m-2s-1 de intensidade luminosa e 15 ups de salinidade. Para carboidratos, nas condições de baixa intensidade luminosa (12 μmol m-2s- 1), a uma temperatura de 20 °C e salinidades de 10 e 15 ups, foram registrados valores inferiores à amostra controle, caracterizando um consumo desta biomolécula por parte das algas. Nestas mesmas condições ambientais, foram registrados os maiores teores de fósforo tecidual, variando entre 0,86 a 1,09 % do peso das cinzas. As maiores taxas de absorção do fósforo do meio ocorreram na salinidade de 25 ups e 25 °C de temperatura, diminuindo da intensidade luminosa de 12 μmol m-2s-1 para 40 μmol m-2s-1. As maiores concentrações de fósforo inorgânico residual na água do meio de cultivo ocorreram nas salinidades de 10 e 15 ups, em todas as intensidade luminosas e temperaturas estudadas. Através do coeficiente de correlação de Pearson, observou-se que os teores de proteínas apresentaram uma forte correlação negativa com a intensidade luminosa e positiva com a temperatura e salinidade, embora com esta última não tenha sido significativa. Para carboidratos, as correlações com os parâmetros abióticos foram todas positivas. Correlações negativa e positiva, não significativas, foram observadas entre esta biomolécula e o teor de proteínas e a taxa de absorção de fósforo disponível no meio, respectivamente. Por outro lado, com fósforo tecidual, ocorreu uma correlação negativa, altamente significativa. Este estudo mostra o estado fisiológico de Gelidium crinale e contribui para o estabelecimento das melhores condições de cultivo para produção de proteína, carboidrato e fósforo tecidual e indicação do uso racional de nutrientes, fornecendo informações para a otimização de processos de maricultura, tanto em termos de cultivo bem sucedido de algas, quanto de redução no impacto sobre o ambiente.
Resumo:
The effects of four light intensities (0; 2.8 +/- 0.9; 5,5 +/- 1,8 e 7,8 +/- 2,5 mu mol s(-1) m(-2), about 136.5 +/- 87.5; 273 +/- 43.8 e 390 +/- 125 lux, respectively) on survival, productivity, weight gain and larval development of Macrobrachium amazonicum were investigated. Four treatments with three replicate tanks were evaluated. Newly hatched larvae were held in black tanks (80.2 +/- 0.6 larvae L(-1)) filled with 50-L-brackish water (salinity of 10), in a recirculating system. Tanks were covered with shadow cloth allowing 35% and 70% light, respectively, to reach light intensities of 2.8 +/- 0.9 and 5.5 +/- 1.8 mu mol s(-1) m(-2) at the water surface. Complete absence of light (0 mu mol s(-1) m(-2)) was obtained covering the tanks with opaque black plastic, and full-light condition used no covering (7.8 +/- 2.5 mu mol s(-1) m(-2)). Observations showed that the survival rate was not affected by light intensity. Productivity and weight gain were higher under 7.8 +/- 2.5 mu mol s(-1) m(-2) light intensity than under 0 and 2.8 +/- 0.9 1 mu mol s(-1) m(-2) intensities (P<0.05). The larval development index was similar among the treatments under the different light intensities. However, from stage VII this index was increased slightly in the treatment under 7.8 +/- 2.5 mu mol s(-1) m(-2) light intensity. In conclusion, light intensity affects larval development of M. amazonicum. Values as high as 7.8 mu mol s(-1) m(-2) (about 390 lux) improve the larval performance by enhancing development, productivity and weight gain compared to lower values.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Kerodon rupestris (rock cavy, mocó) is an endemic caviidae of Brazilian northeast that inhabits rocky places in the semi arid region. The aim of this study was to characterize the activity/rest rhythm of the rock cavy under 12:12 h LD cycle and continuous light. In the first stage, seven animals were submitted to two light intensities (LD; 250:0 lux and 400:0 lux; 40 days each intensity). In the second stage four males were kept for 40 days in LD (470:<1 lux), for 18 days in LL 470 lux (LL470) and for 23 days in red dim light below 1 lux (LL<1). In the third stage three males were initially kept in LD 12:12 h (450:<1 lux) and after that in LL with gradual increase in light intensity each 21 days (<1 lux LL<1; 10 lux-LL10; 160 lux LL160; 450 lux LL450). In the fourth stage it was analyzed the motor activity of 16 animals in the first 10 days in LD. Motor activity was continuously recorded by passive infrared movement sensors connected to a computer and totaled in 5 min bins. The activity showed circadian and ultradian rhythms and activity peaks at phase transitions. The activity and the rest occurred in the light as well as in the dark phase, with activity mean greater in the light phase for most of the animals. The light intensity influenced the activity/rest rhythm in the first three stages and in the first stage the activity in 400 lux increased in four animals and decreases in two. In the second stage, the tau for 3 animals in LL470 was greater than 24 h; in LL<1 it was greater than 24 h for one and lower for two. In the third stage the tau decreased with the light intensity increase for animal 8. During the first days in the experimental room, the animals did not synchronize to the LD cycle with activity and rest occurring in both phases. The results indicate that the activity/rest rhythm of Kerodon rupestris can be affected by light intensity and that the synchronization to the LD cycle results from entrainment as well as masking probably as a consequence of the action of two or more oscillators with low coupling strength
Resumo:
O objetivo desse trabalho foi avaliar a influência da intensidade da luz e cor de uma resina composta no grau de dureza Knoop. Corpos-de-prova foram confeccionados utilizando-se matrizes de poliéster envoltas por um anel de cobre, contendo uma cavidade padronizada de 6 mm de diâmetro por 2 mm de espessura. Estas cavidades foram preenchidas com resina composta selecionada, Fill Magic - Vigodent, com as cores A3, B3, C3, D3 e I, fotopolimerizadas através de um fotopolimerizador Elipar, calibrado para produzir 3 intensidades de luz diferentes: 450 mW/cm², 800 mW/cm² e uma intensidade de luz crescente de 100 a 800 mW/cm². Foram confeccionados 90 corpos-de-prova em que o tempo de exposição da resina à luz halógena foi de 40 s. As amostras foram armazenadas em tubos de ensaio com água destilada a 37 ± 1ºC. Após este período, foram realizados os testes de dureza Knoop na região de superfície e fundo. Os resultados mostraram que houve diferença estatística em relação a intensidade de luz, entretanto em relação a cor, não houve diferença estatística. Os autores concluíram que a cor do compósito não influencia a dureza Knoop e que a intensidade progressiva promoveu os melhores resultados de dureza Knoop.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The morphological characteristics of seedlings and the anatomical characteristics of vegetative organs and floral scape of P. hilairei (Eriocaulaceae) were analyzed to investigate the ecological and taxonomic implications for the species. P. hilairei is a perennial plant with an aerial stem and it grows in recently decomposed stony, sandy soils of the Serra do Cipo, in the State of Minas Gerais, Brazil. It is found both on wet and dry soils, exposed to constant winds, high light intensities and extreme daily fluctuations of temperature. The results show that the seeds have operculum and the initial seedling development stages are the same for other Eriocaulaceae. During the germination period, the undifferentiated axis of the embryo becomes apparent. The observation of the development of this axis, shows first, the growth of the leaves and later that of the adventitious root. Attention is focused on the apical stem region which presents sterelis lateral branching with adventitious roots in its base which will develop into paraclades (system of florescences). Both of them rise out of the pericycle and characterize its vegetative growth. The occurrence of a special leaf substomatal chamber may be related to an efficient protection for the gaseous exchange and may be considered an important characteristic of the Eriocaulaceae.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The aim of this paper is to verify the correlation between environmental indicators and behaviors expressed by laying hens kept in cages. The birds react to a severe environment through their behaviors, end the behaviors can be monitored to identify the birds' welfare conditions. The behaviors birds display ere the result of stress caused by the combination of environmental temperature, relative humidity, radiant heat, and air speed (environmental temperature being the most important). In order to check the influence of the environment, an experiment was carried out on a commercial poultry farm, located in the city of Bastos. The study was initiated in March 2007, during four non-consecutive weeks. The birds' behaviors were recorded using video, by cameras installed in the cages. The birds behaviors were identified and noted for the frequency of occurrence for each bird, and the average duration of each behavior (in seconds), using video samples of 15 minutes recorded from 1 PM to 4 PM. The environmental variables collected were: air temperature, concentration of ammonia, relative air humidity, velocity of the air, noise, roof temperature, and light intensity. The observed behaviors were: opening wings, stretching, threatening, ruffling feathers, drinking water, aggressive pecking, eating, running, lying down, stretching head out of the cage, preening, mounting and prostrating. Principal Components Analysis was used to determine associations between the behavior variables and environmental variables described above. In this experiment, there were no significant correlations between behavioral variables and environmental variables.
Resumo:
The silicon-based gate-controlled lateral bipolar junction transistor (BJT) is a controllable four-terminal photodetector with very high responsivity at low-light intensities. It is a hybrid device composed of a MOSFET, a lateral BJT, and a vertical BJT. Using sufficient gate bias to operate the MOS transistor in inversion mode, the photodetector allows for increasing the photocurrent gain by 106 at low light intensities when the base-emitter voltage is smaller than 0.4 V, and BJT is off. Two operation modes, with constant voltage bias between gate and emitter/source terminals and between gate and base/body terminals, allow for tuning the photoresponse from sublinear to slightly above linear, satisfying the application requirements for wide dynamic range, high-contrast, or linear imaging. MOSFETs from a standard 0.18-μm triple-well complementary-metal oxide semiconductor technology with a width to length ratio of 8 μm /2 μm and a total area of ∼ 500μm2 are used. When using this area, the responsivities are 16-20 kA/W. © 2001-2012 IEEE.
Resumo:
Pós-graduação em Ciências Biológicas (Biologia Vegetal) - IBRC
Resumo:
Pós-graduação em Zootecnia - FMVZ
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)