Caracterización de tres suelos en Hidalgo y Querétaro, México: disponibilidad y daño tóxico por arsénico en garbanzo (Cicer arietinum L.)

La presencia de arsénico (As) en suelos permite su migración hacia cultivos como el garbanzo (Cicer arietinum L.). En este trabajo se comparan contenidos de As en tres suelos de dos estados de la República Mexicana, y su acumulación en C. arietinum L. Los suelos resultaron moderadamente alcalinos, no salinos, reductores intermedios y con potenciales zeta (pZ) que indican suspensiones coloidales moderadamente estables. Con moderados contenidos de humedad y texturas franco- arcillosas, densidad aparente, capacidad de campo, agregados estables y capacidad de intercambio catiónico, significativamente diferentes y semejantes en velocidad de infiltración y espesor del horizonte A. En materia orgánica, carbono y nitrógeno son significativamente diferentes y con bajos contenidos. Existen diferencias importantes entre semillas de C. arietinum L. certificadas o no en su capacidad de germinación y desarrollo de raíces. El efecto genotóxico del As en raíces de C. arietinum L. se apreció por inducción de micronúcleos, reducción de 2,8 veces la división celular de muestras tratadas con agua con As, respecto de muestras control. Se apreció incremento de As de 9,5 veces en plántulas germinadas en suelo de El Salitre, que en suelo de Bella Vista, indicativo de migración del As. La suma de efectos de concentración de As en suelos y agua se incrementa 15,3 veces. Entre suelos de Bella Vista y Querétaro la correlación fue 2,9 veces mayor. En controles positivos los IBAs resultan 3 veces mayores que en las pruebas experimentales.

Organic geochemistry of DSDP Leg 41 holes

The black shale encountered in Cretaceous cores of the Cape Verde area during the DSDP Leg 41 are of marine origin and correspond to excellent potential oil source rocks. They have a low content of humic compounds. Pyrolysis assays, chloroformic extracts, and kerogen data attest to a relatively low stage of evolution for samples at Site 367 (Cape Verde Basin). The samples from Site 368 (Cape Verde Rise) are more evolved, and the deeper ones would be located at the beginning of the principal zone of oil formation.

Polychaete taxocenes in the Pevek Strait (Chaun Bay) and the Long Strait, Chukci Sea

In spite of similar abiotic conditions in the Long Strait and Chaun Bay, the polychaete taxocenes differ markedly. In some cases biomass, production, and assimilation of polychaetes in the Long Strait are lower, while rate of metabolism is higher than in the Chaun Bay. This may be related to appearance of an intermediate layer in the Long Strait during some years. The latter is characterized by positive temperatures in winter and by low content of oxygen; these conditions are unfavorable for Arctic polychaetes.

(Table 1) Geochemical composition of surface waters obtained aboard the R/V Rift along the Volga-Caspian canal

The Volga River discharge consists of the waters transferred by fast currents through channels and the waters which are passing through the shallow areas of the delta overgrown by cane. Using the hydrochemical data, it is possible to track distribution of the waters modified by 'biofilters' of macrophytes in the delta shallows starting from the external edge of the delta. The main distinctive features of these waters are the high content of dissolved oxygen, the abnormally high values of the pH, and the low content of dissolved inorganic carbon (both total and as CO2). These waters extend in the shape of 1 to 3-km-wide strips at a distance of 20-40 km from the outer border of the delta. The analysis of the data obtained during the expeditions run by the Institute of Oceanology of the Russian Academy of Sciences in 2003-2009, along with archived and published data, show that such 'modified' waters occur almost constantly along the outer edge of the Volga River delta.

Benthic oxygen and nitrogen fluxes at different time series sites in the southern North Sea, 2012 to 2014

Benthic oxygen and nitrogen fluxes were quantified within the years 2012 to 2014 at different time series sites in the southern North Sea with the benthic lander NuSObs (Nutrient and Suspension Observatory). In situ incubations of sediments, in situ bromide tracer studies, sampling of macrofauna and pore water investigations revealed considerable seasonal and spatial variations of oxygen and nitrogen fluxes. Seasonal and spatial variations of oxygen fluxes were observed between two different time series sites, covering different sediment types and/or different benthic macrofaunal communities. On a sediment type with a high content of fine grained particles (<63 µm) oxygen fluxes of -15.5 to -25.1 mmol/m**2/d (June 2012), -2.0 to -8.2 mmol/m**2/d (March 2013), -16.8 to -21.5 mmol/m**2/d (November 2013) and -6.1 mmol/m**2/d (March 2014) were measured. At the same site a highly diverse community of small species of benthic macrofauna was observed. On a sediment type with a low content of fine grained particles (<63 µm) high oxygen fluxes (-33.2 mmol/m**2/d August 2012; -47.2 to -55.1 mmol/m**2/d November 2013; -16.6 mmol/m**2/d March 2014) were observed. On this sediment type a less diverse benthic macrofaunal community, which was dominated by the large bodied suspension feeder Ensis directus, was observed. Average annual rain rates of organic carbon and organic nitrogen to the seafloor of 7.44 mol C/m**2/y and 1.34 mol N/m**2/y were estimated. On average 79% of the organic bound carbon and 95% of the organic bound nitrogen reaching the seafloor are recycled at the sediment-water interface.

Sedimentology on sediment cores from the eastern Weddell Sea, Antarctica

Sediment cores from nine sites along a profile on the Antarctic continental margin off Kapp Norvegia were analysed sedimentologicaly. The carbonate and organic carbon content, grain size distribution, composition of the coarse fraction and clay minerals were determined. d18O- and d13C-isotope ratios were also measured. The distribution of ice rafted debris was determined by a new method. Sedimentation-rates were obtained from 230Th- and 14C-analyses. A segregation into seven different sediment facies was made possible by different sedimentological parameters, which can be attributed to different sedimentation environments and conditions. Thr profile can be divided morphologicaly into shelf, upper continental slope, slope terrace and lower continental slope. The paratill facies is deposited on the shelf during an interglacial phase and consists mainly of ice rafted sediments. A portion of the fine fraction is being carried away by the antarctic coastel current. The sedimentation rate lies between 0 and 3 cm/1000 a. The coarse grained deposits of the upper, relatively steep continental slope, were specified as a rest sediment. Current and gravity sediment transport are responsible for the intensive sorting of ice rafted material coming from the shelf. The fine sediment is carried away by currents while sand and silt are deposited as small turbidites on the slope terrace. The morainic facies only appears at the base of the upper continental slope and defines ice advances, beyond the shelf margin. The facies mainly consists of transported shelf sediments. The interglacial facies, deposited during the interglacial phases on the continental slope, are characterized by high proportions of ice raft, coarse mean grain size, low content of montmorillonite and a carbonate content, which mainly originates from planktonic foraminifera (N. pachyderma). At the central part of the slope the sedimentation rate is at its lowest (2 cm/1000 a) and increases to 3-4 cm/1000 a towards the sea, due to high production of biogenic components and towards the continent due to an increasing input of terrigenous material. Sedimentary conditions during glacial times are depicted in the glacial facies by a low content of ice rafted debris, a lower mean grain size and a high content of montmorillonite. Biogeneous components are absent. The sedimentation rate is generally about 1 cm/1000a. A transition facies is deposited during the transition from glacial to interglacial conditions. Typical for this facies, with a terrigenous composition similar to the interglacial facies, is a high content of radiolaria. The reason for the change of plankton from a siliceous to a carbonacous fauna may have been the changing hydrography caused by the sea ice. The surge facies is deposited at the continental margin under the ice shelf and is a sediment exclusively delivered by currents. With the aid of this facies it was, for the first time possible to prove the existence of Antarctic ice surges, an aspect wh ich has been discussed for the past 20 years.

Grain counts and XRD mineralogy of turbidite sand and hemipelagic mud from ODP Leg 168 sites

Sequences of late Pliocene to Holocene sediment lap onto juvenile igneous crust within 20 km of the Juan de Fuca Ridge in northwestern Cascadia Basin, Pacific Ocean. The detrital modes of turbidite sands do not vary significantly within or among sites drilled during Leg 168 of the Ocean Drilling Program. Average values of total quartz, total feldspar, and unstable lithic fragments are Q = 35, F = 35, and L = 30. Average values of monocrystalline quartz, plagioclase, and K-feldspar are Qm = 46, P = 49, and K = 5, and the average detrital modes of polycrystalline quartz, volcanic-rock fragments, and sedimentary-rock plus metamorphic-rock fragments are Qp = 16, Lv = 43, and Lsm = 41. Likely source areas include the Olympic Peninsula and Vancouver Island; sediment transport was focused primarily through the Strait of Juan de Fuca, Juan de Fuca Channel, Vancouver Valley, and Nitinat Valley. Relative abundance of clay minerals (<2-µm-size fraction) fluctuate erratically with depth, stratigraphic age, and sediment type (mud vs. turbidite matrix). Mineral abundance in mud samples are 0%-35% smectite (mean = 8%), 18%-59% illite (mean = 40%), and 29%-78% chlorite + kaolinite (mean = 52%). We attribute the relatively low content of smectite to rapid mechanical weathering of polymictic source terrains, with little or no input of volcanic detritus from the Columbia River. The scatter in clay mineralogy probably was caused by converging of surface currents, turbidity currents, and near-bottom nepheloid clouds from several directions, as well as subtle changes in glacial vs. interglacial weathering products.

Results of biogeochemical studies in the Russian Arctic seas: isotope and radioisotope data

Comprehensive biogeochemical studies including determination of isotopic composition of organic carbon in both suspended matter and surface layer (0-1 cm) bottom sediments (more than 260 determinations of d13C-Corg) were carried out for five Arctic shelf seas: White, Barents, Kara, East Siberian, and Chukchi Seas. The aim of this study is to elucidate causes that change isotopic composition of particulate organic carbon at the water-sediment boundary. It is shown that isotopic composition of organic carbon in sediments from seas with high river run-off (White, Kara, and East Siberian Seas) does not inherit isotopic composition of organic carbon in particles precipitating from the water column, but is enriched in 13C. Seas with low river run-off (Barents and Chukchi Seas) show insignificant difference between d13C-Corg values in both suspended load and sediments because of low content of isotopically light allochthonous organic matter in suspended matter. Biogeochemical studies with radioisotope tracers (14CO2, 35S, and 14CH4) revealed existence of specific microbial filter formed from heterotrophic and autotrophic organisms at the water-sediment boundary. This filter prevents mass influx of products of organic matter decomposition into the water column, as well as reduces influx of OM contained in suspended matter from water into sediments.

Estudio de la reactividad álcali-sílice originada por componentes reactivos minoritarios

El objetivo de la presente tesis se enmarca dentro del estudio del estado de hormigones de presas, desarrollado en los últimos años en el Laboratorio Central del CEDEX, en el que se ratifica que una de las causas más importantes del deterioro de obras hidráulicas en España es la reacción álcali-sílice. La tesis que se presenta pretende contribuir al mejor conocimiento de la reacción álcali sílice con fines normativos preventivos, abordando los aspectos relativos a la identificación de áridos reactivos en el hormigón. El conocimiento de los áridos reactivos en España (origen de la reactividad, tipos de reacción y su comportamiento, así como las herramientas disponibles para su detección) es imprescindible para evitar la futura aparición de esta patología en nuevas estructuras, ya sea evitando el uso de áridos reactivos o tomando las medidas preventivas necesarias si su utilización es inevitable. A partir del Estudio Bibliográfico realizado se han detectado diversas lagunas en la identificación y caracterización de áridos de reacción rápida, cuya característica principal es que son reactivos con concentraciones muy bajas de diferentes componentes reactivos. Para resolver las lagunas identificadas se ha planeado un estudio experimental, consistente en el análisis de áridos cuya reactividad es conocida porque han sido empleados en obras afectadas por la reacción álcali sílice. Sobre el árido grueso extraído de estas estructuras se han realizado una serie de ensayos normalizados (estudio petrográfico, ensayo acelerado de probetas de mortero, ensayo Gel Pat y ensayos químicos). El análisis de los resultados experimentales ha permitido conocer las limitaciones reales en áridos reactivos españoles de las diferentes técnicas existentes, tratando de minimizarlas para áridos cuya reactividad es debida a componentes minoritarios (áridos de reacción rápida). Además, se ha evaluado la utilización de la difracción de rayos X (no normalizada) y la creación de un nuevo ensayo (Gel Pat Modificado). Finalmente, el estudio experimental ha permitido fijar una metodología de ensayo para el estudio de áridos reactivos por su contenido en componentes minoritarios (áridos de reacción rápida). The objective of this Thesis fits into the research program developed in CEDEX the last years and focused on the durability of concrete in Dams. This research work confirms that one of the main problems related to the deterioration of hydraulic structures is the alkali silica reaction. This Thesis aims to contribute to a better understanding of alkali-silica reaction, for preventive regulation purposes, considering the aspects related to the identification of reactive aggregates. The knowledge of Spanish reactive aggregates (origin of the reactivity, types of reaction and their behavior, and the tools available to detect and describe them) is essential to avoid the appearance of this pathology in new structures, either not using the reactive aggregate or taking the necessary preventive measures available in bibliography if the use of the reactive aggregate is inevitable. From the State-of –the-Art developed, several gaps have been detected in the detection and description of rapid reactive aggregates, which main characteristic if that they are reactive with low content of some reactive components. An experimental programme has been designed to solve these gaps, consisting on studying the reactivity of aggregates used in Spanish structures affected by the alkali silica reaction. Several Standard Tests have been carried out on coarse aggregates removed from the affected structures (Petrographic description, Accelerated Mortar Bar Test, Gel Pat Test and Chemical Tests). The analysis of the results obtained in Spanish reactive aggregates allows to know the advantages and limitations of each test, trying to minimize the disadvantages to detect Spanish reactive aggregates because of the minority content of rapid reactive components (rapid reactive aggregates). Moreover, X ray diffraction (not standardized) has been tested to detect rapid reactive aggregates and also a new test has been developed for the same purpose (Optimized Gel Pat Test). Finally, the experimental programme has made possible to define a methodology for detection of Spanish rapid reactive aggregates.

Efectos de la aplicación de fertilizantes de nueva generación en la dehesa toledana: producción, diversidad y composición florística de pastos herbáceos

Fertilization can be an interesting treatment to improve the different productions of the dehesa and to improve tree vigor. In order to evaluate the effect of different fertilizers of new generation on herbaceous pasture diversity and species composition, in this work we analyzed the effect of three treatments: control (natural pastures), fertization with 36 UF of P2O5 of a complex NPK and low content of N, and natural phosphates. Fertilization was applied in autumn of 2009, 2010 and 2011 and we analized herbaceous pastures composition and yield in springs of 2010, 2011 and 2012 (one control per year). The best results of production were obtained with the NPK application; also, pasture specific richness and diversity improved with the fertilization in years of average regime of precipitation.

Synthesis of new calixarene-based lubricant additives

The lubricants are normally composed by base oils and a number of additives which are added to improve the performances of the final product. In this work, which is due to the collaboration between ENI S.p.A. and Prof. Casnati’s group, significant results in the application of calixarene structures to two classes of lubricant additives (viscosity index improvers and detergents) were shown. In particular, several calix[8]arene derivatives were synthesized to use as core precursors in the “arm-first" synthetic processes of star polymers for viscosity index improver applications. The use of calixarene derivatives enable the production of star polymers with a high and well-defined number of branches and endowed with a very low dispersivity of molecular weight which can originate better performances than the current commercially available viscosity index improvers of the major competitor. Several functional groups were considered to prepare reactive p-tert-butylcalix[8]arene cores to be used in living anionic polymerization. n-butyllithium was used as model of the living anionic polymer to test the outcome of the reaction of polymer insertion on the calixarene core, facilitating the analyses of the products. The calixarene derivative, which easier reacts with n-BuLi, was selected for the preparation of star polymers by using a isoprene/styrene living anionic polymer. Finally, the lubricant formulations, which include the calixarene-based star polymers or commercially available products as viscosity index improvers, were prepared and comparatively tested. In the last part of Thesis, the use of calixarenes as polycarboxylic acids to synthetize new sulfur-free detergents as lubricant additives was carried out. In this way, these calcium-based detergents can be used for the formulation of new automotive lubricants with low content of ash, phosphorus and sulfur (low SAPS). To increase the low deprotonation degree of OH groups and their capacity to complex calcium ions, a complete functionalization of the calixarene mixtures with acetic acid groups was required. Futhermore, the “one-step” synthesis of new calixarenes with alkyl chains in para positions longer than the ones already known was necessary to improve the oil solubility and stability of reverse micelles formed by the detergents. Moreover, the separation and characterization of the calixarenes were carried out to optimize their synthetic process, also on pilot scale. For our purpose, the use of p-tert-octylcalixarenes for the preparation of detergents was carried out to compare the properties of the final detergents respect to the use of the p-dodecyl calixarenes. Once achieved the functionalization of both calixarene mixtures with carboxylic acid groups, the syntheses of new calixarene-based detergents were carried out to identify the best calixarene derivative for our research goals. The synthetic process for the preparation of calixarene-based detergent having very high basicity (TBN 400) was also investigated for applications in lubricants for marine engines. In addition, with the aim of testing the calixarene-based detergents in automotive lubricants, several additive packages (concentrated mixture of additives) containing our detergents were prepared. Using these packages the corresponding automotive lubricants can be formulated. Besides, a lubricant containing commercial calcium alkylbenzene-sulfonates detergents was prepared to compare its detergency properties with those of the calixarene-based oils.

Omics for Investigating Chitosan as an Antifungal and Gene Modulator

Chitosan is a biopolymer with a wide range of applications. The use of chitosan in clinical medicine to control infections by fungal pathogens such as Candida spp. is one of its most promising applications in view of the reduced number of antifungals available. Chitosan increases intracellular oxidative stress, then permeabilizes the plasma membrane of sensitive filamentous fungus Neurospora crassa and yeast. Transcriptomics reveals plasma membrane homeostasis and oxidative metabolism genes as key players in the response of fungi to chitosan. A lipase and a monosaccharide transporter, both inner plasma membrane proteins, and a glutathione transferase are main chitosan targets in N. crassa. Biocontrol fungi such as Pochonia chlamydosporia have a low content of polyunsaturated free fatty acids in their plasma membranes and are resistant to chitosan. Genome sequencing of P. chlamydosporia reveals a wide gene machinery to degrade and assimilate chitosan. Chitosan increases P. chlamydosporia sporulation and enhances parasitism of plant parasitic nematodes by the fungus. Omics studies allow understanding the mode of action of chitosan and help its development as an antifungal and gene modulator.

Chemical observations in the Red Sea and the inner Gulf of Aden during the International Indian Ocean Expedition 1964/65

The Red Sea has a special place among the adjacent seas of the world. High evaporation, exclusion of its deep water from contact with the Indian Ocean proper and complete absence of continental drainage may result special conditions of the chemistry of the Red Sea. This paper aims to describe and explain the peculiarity of the hydrochemical situation. The influence of the topography, of the inflow and outflow through the straights of Bab el Mandeb, of the evaporation, of the stability of the water layers, and of the circulation will be studied. An attempt is made to estimate the apparent oxygen ultilisation in order to obtain an indication of the biological activity. A further attempt is made toward the quantitative estimation of the circulation of the nutrients and also to obtain some information about transport, dissolution, and precipitation of calcium carbonate. The basis of these investigations are mainly observations of R. V. "Meteor" during the International Indian Ocean Expedition 1964/65. The determination of dissolved oxygen, dissolved inorganic phosphate, nitrate, nitrite, ammonia, pH, alkalinity, silicate as well as salinity and temperature forms the necessary basis for such an investigation of the chemical conditions. In the first chapter the methods and some modifications for the determination of the chemical properties as applied during the I.I.O.E. cruise of R. V. "Meteor" are described. The new methods, as worked out and tested under sea going conditions during several years by the author, are described in more detail. These are the methods for nitrate, silicate, the automatic determination of dissolved inorganic phosphate and silicate, the automated determination of total phosphorus, the in situ recording of the oxygen tension, and the modification for the determination of ammonia, calcium, and dissolved oxygen. With these revised methods more than 18,000 determinations have been carried out during the Indian Ocean cruise. The complete working up of the chemical data of the Indian Ocean Expedition of R. V. "Meteor" is devided into four sections: Contributions 1) to the Chemistry of the Red Sea and the Inner Gulf of Aden, 2) to the Gulf of Aden and the Somali Coast Region, 3) to the Western Indian Coast Region, and 4) to the Persian Gulf and the Straits of Oman. This paper presents the first contribution. The special hydrographical conditions are discussed. It can be shown, that the increase of salinity in the surface waters from the south to the north of the Red Sea is only to about 30 % due to evaporation. The remaining increase is presumed to be due to the admixture of deep water to the surface layers. A special rate for the consumption of oxygen (0.114 ml/ l/a) is derived for the deep water of the Red Sea at 1500 m. Based upon the distribution of the dissolved oxygen along the axii of the Red Sea, a chematic model for the longitudinal circulation of the Red Sea is constructed. This model should be considered as a first approximation and may explain the special distribution of phosphate, nitrate, and silicate. Based upon the evaluation of the residence time of the deep water a dissolution rate for silicate is estimated as 1 mygat/a. It seems possible to calculate residence times of water masses outside the Red Sea from the silicate content. The increase of silicate and the consumption of oxygen lead to residence times of the water below the thermocine of 30 to 48 years. The distribution of oxygen in the Straits of Bab el Mandeb is described and discussed. The rate of consumption of the oxygen in the outflowing Red Sea water is estimated to 8.5 ml/ l/a. This rather high rate is explained with reference to the special conditions in the outflowing water. The Red Sea water is characterized initially by a relative high content of oxygen and a low content of nutrients. The increase in nutrients and the decrease in the oxygen content is a secondary process of the Red Sea water on its way to the Arabian Sea. Based upon the vertical distribution of the dissolved inorganic phosphate vertical exchange coefficients of 1 - 4 g/cm/sec and vertical current speeds of 10**-5 to 10**-4 cm/sec are calculated for some stations in the Red Sea. The distribution of phosphate, silicate, nitrate, nitrite and ammonia for the Red Sea and the Straits of Bab el Mandeb are discussed. The special circulation is evaluated and the balance of the nutrients is estimated by means of the brutto transport. The nutrient deficit is assumed to be balanced by sporadic inflow of intermediate water from the Gulf of Aden. An example for such an inflow has been observed and is demonstrated. The silicate-salinity relationships are a suitable way for characterizing water masses in the Red Sea. Equations for the calculation of the different components from the carbonate system, the ion activities, and the calcium carbonate saturation are evaluated. The influence of temperature and pressure is taken into account. The carbonate saturation is calculated from the determined concentrations of calcium, alkalinity, and the hydrogen ion activity. Saturation values of 320 % are found for the surface layer and of 100% ± 1 for the deep water. The extraordinary equilibrium conditions may explain the constant Ca/Cl ratio and also the sedimentation of undissolved carbonate skelecons even in greater depths. A main sedimentation rate of 2 * 10**-3cm/year is evaluated from a total sedimentation of 10 * 106 to/a of calcium carbonate in the Red Sea. The appendix contains those data, which are not published in the data volume of the I.I.O.E. expedition of R. V. "Meteor".

Chemical composition of the soluble fraction of oxidate portions of Lakes Shebadnowan ferromanganese concretions

Shebandowan Lakes, Ontario, are the site of at least 49 shallow (2-12 m) ferromanganese concretion deposits, widely distributed throughout the 48 km of the watercourse. X-ray diffraction and Mossbauer methods have revealed the presence of goethite in some of the concretions. Chemical analyses of the acid soluble portions of 72 samples gave an average composition of 43.1% Fe and 5.65% Mn with a low content of trace elements. The Shebandowan concretions are among the richest in iron of lake concretions reported, possibly because only the acid soluble portion was analysed. Their low content of trace elements suggests rapid growth rates and a relatively young age. A positive correlation was found between Mn and K, Ca, Mg, Cu, Ni, and Co and the relationship between the last three and Mn was deemed significant. Zn was independent of association with either Mn and Fe, probably due to the presence locally of zinc sulphide deposits. Analyses of lake bottom and influent waters suggested that frequent resampling of the sites would be required throughout the year to permit meaningful interpretation of the effect of water composition of concretions. Analyses of sediment cores from 20 concretion sites indicated an upward increase in Fe and Mn and in the Mn/Fe ratio, consistent with the model of upward migration of the elements, where Mn is more mobile than Fe. This study concludes that a considerable proportion of the elements have been supplied to the Shebandowan concretions via the diagenetic process; generally a minor fraction of the elements has been abstracted directly from the superjacent water.

Bio-inspired carbon electro-catalysis for the oxygen reduction reaction

We report the synthesis, characterisation and catalytic performance of two nature-inspired biomass-derived electro-catalysts for the oxygen reduction reaction in fuel cells. The catalysts were prepared via pyrolysis of a real food waste (lobster shells) or by mimicking the composition of lobster shells using chitin and CaCO3 particles followed by acid washing. The simplified model of artificial lobster was prepared for better reproducibility. The calcium carbonate in both samples acts as a pore agent, creating increased surface area and pore volume, though considerably higher in artificial lobster samples due to the better homogeneity of the components. Various characterisation techniques revealed the presence of a considerable amount of hydroxyapatite left in the real lobster samples after acid washing and a low content of carbon (23%), nitrogen and sulphur (<1%), limiting the surface area to 23 m2/g, and consequently resulting in rather poor catalytic activity. However, artificial lobster samples, with a surface area of ≈200 m2/g and a nitrogen doping of 2%, showed a promising onset potential, very similar to a commercially available platinum catalyst, with better methanol tolerance, though with lower stability in long time testing over 10,000 s.