Influence of drying conditions on the rheological properties of prunes

Rheological properties of rehydrated prunes were obtained applying compression-relaxation tests by using a Texture Analyzer TAXT2i. A mathematical development was adopted to determine the stress and area, along the deformation. Experimental data of stress versus time was fitted by using three different rheological models: generalized Maxwell, Normand & Peleg and Maxwell. Results showed that generalized Maxwell model can be used to describe the viscoelastic behavior of the samples. The rheological parameters obtained indicated that prunes exhibited elastic behavior more pronounced at low moisture content and drying air temperature. At high moisture content and temperature the sample became a more viscous and less rigid.

MnO2 influence on the electrical properties of SnO2-based ceramic systems

Tin dioxide is an n-type semiconductor that when doped with other metallic oxides exhibits non-linear electric behavior with high non-linear coefficient values typical of a varistor. In this work, electrical properties of the SnO2.CoO.Ta2O5 and SnO2.CoO.MnO2.Ta2O5 ceramics systems were studied with the objective of analyzing the influence of MnO2 on sintering behavior and electrical properties of these systems. The compacts were prepared by powder mixture process and sintered at 1300°C for 1 hour, in air, using a constant heating rate of 10°C/min. The morphological and structural properties were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The densities of the sintered ceramics were measured using the Archimedes method. The SnO2.CoO.Ta2O5 and SnO2.CoO.MnO2.Ta2O5 systems presented breakdown fields (Eb) about 3100 V.cm-1 and 3800 V.cm-1, respectively, and non-linear coefficient (α) about 10 and 20, respectively.

Influence of the concentration of polyols on the rheological and spectral characteristics of guar gum

Polyols are widely used as sugar substitutes and provide texture to foods. Guar gum has many applications in food industry such as increasing product viscosity and improving texture. Knowledge of rheological properties of gum/polyol systems is important to permit replacing sugar while maintaining product texture. In this work, rheological properties of 0.1, 0.5 and 1 g/100 g guar solutions containing 10 and 40 g/100 g of maltitol, sorbitol, or xylitol were studied. The behavior of these mixtures was evaluated by steady and oscillatory shear measurements, and after a freezing/thawing cycle. Apparent viscosity of guar solutions increased with addition of polyols and with the increase in their concentrations, except for 40 g/100 g sorbitol addition to 1 g/100 g guar gum, in which the apparent viscosity decreased. Addition of polyols also increased the dynamic moduli of the systems. In mixtures of guar with 40 g/100 g polyol, the phase angle (δ) was below unity, but was dependent on frequency, which is characteristic of concentrated solutions with a certain degree of structuring. FTIR spectroscopy was studied to provide information on possible interactions between guar gum and polyols. Analyses carried out after freezing/thawing showed no changes in the viscoelastic behavior of the solutions. © 2013 Elsevier Ltd.

Características reológicas do exopolissacarídeo botiosferana produzido pelo Botryosphaeria rhodina MAMB-05 em três fontes de carbono: glucose, frutose e sacarose

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades reológicas de exopolissacarídeos produzidos por bactérias dos gêneros

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Caracterização físico-química de galactomananas de Adenanthera pavonina (Carolina) e Delonix regia (Flamboyant) reticuladas com trimetafosfato de sódio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo das propriedades elétricas não lineares de polímeros conjugados

Pós-graduação em Física - IGCE

Influência do óxido de cromo nas propriedades varistoras do óxido de estanho

Pós-graduação em Química - IQ

Avaliação de frequências não convencionais na obtenção de curvas de DMA de compósitos poliméricos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do efeito higrotérmico nas propriedades mecânicas de compósitos de PPS/fibras contínuas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo de um sistema varistor à base de 'SN''O IND.2' dopado com terras-raras

Pós-graduação em Química - IQ

Estudo do comportamento das feições lineares observado em dados aeromagnéticos da Bacia do Paraná

O processamento dos dados aeromagnéticos em imagens revelou-se como um bom método de interpretação, que aqui denominamos de método das imagens sombreadas. A aplicação deste método foi feita em dados aeromagnéticos de uma área da Bacia do Paraná, com o objetivo de realçar os lineamentos que não são evidentes nos mapas de contorno. Para subsidiar os nossos estudos, utilizamos imagens de LANDSAT porque muitos lineamentos presentes na bacia não possuem resposta ao levantamento aeromagnético. Com a integração destas duas imagens definimos duas direções dominantes para os lineamentos nos seguintes intervalos: N40° — 60°W e N40° — 65°E. Com a definição deste padrão, obtivemos informações do arcabouço estrutural e, consequentemente, uma idéia da evolução tectônica da bacia. A outra parte desenvolvida neste trabalho foi o cálculo do vetor de magnetização total nos principais lineamentos da bacia, e eles apresentaram um total de 5 inclinações de magnetização diferentes. Essas inclinações foram explicadas pela superposição do efeito da magnetização induzida, efeito de reversão do campo geomagnético, e o efeito da magnetização anisotrópica causada pela desmagnetização nos diques.

Resina epóxi reforçada com tecido de carbono não dobrável por processo RTM

Com o objetivo de ganhar competitividade no mercado internacional e contribuir para o desenvolvimento tecnológico no país, o presente trabalho apresenta a técnica de processamento de moldagem por transferência de resina (RTM), utilizada na fabricação de materiais compósitos estruturais e ainda pouco estudada no Brasil. Os compósitos processados por essa técnica apresentam maior fração volumétrica de fibras, melhor acabamento superficial e pouca ou nenhuma necessidade de acabamento do componente produzido. Este trabalho compreende a caracterização de compósitos produzidos com resina epóxi monocomponente RTM6 e o tecido não dobrável de fibra de carbono. Os compósitos produzidos pela Hexcel Composites foram analisados pela técnica de ultrassom C-Scan e os resultados mostraram que os laminados processados estão homogêneos quanto à impregnação. Ensaios mecânicos mostram que os laminados com tecido apresentam características comparáveis à dos compósitos produzidos em autoclave com maiores porcentagens de reforço. Em fadiga, os laminados apresentaram um alto e curto intervalo, com tensões próximas à de tração. Quanto ao comportamento térmico observou-se melhora nas propriedades com a adição do reforço de fibras de carbono, que promoveram o aumento da temperatura de transição vítrea (Tg). Quanto ao comportamento viscoelástico, foi observado a influencia da temperatura e freqüência no material. Considerando as propriedades mecânicas e térmicas, ambos os compósitos foram classificados como adequados à aplicação proposta.

Desempenho de bovinos de corte em pastos de Brachiaria brizantha cv. Xaraés manejados em diferentes alturas de pastejo

The production of grazing cattle has been very interesting, due to the low cost to produce fodder, compared to other sources of forage used to feed these animals, but the adequate management pasture has high influence on the success and profitability of cattle production systems. Thus, the objective of this study was to determine the optimum grazing height of Brachiaria brizantha cv. Xaraes, which provides the highest individual weight gain and gain per area. The stocking rate was continuous, with variable stocking rate. The experimental period was from January to December 2010. Three Nellore males were used in each experimental plot, and, when needed, additional animals were used for adjusting the desired heights. Monthly sampling was obtained to estimate forage mass (kg.ha(-1) of DM) and the structural characteristics of the pastures, such as, leaf: stem ratio. The animals were weighed at the beginning of the experiment and every 28 days, after 12 hours of fasting, to measure the average daily gain (ADG) After weighings were performed adjustments stocking rate to desired heights. Throughout the experimental period the animals received mineral supplementation. The desired sward heights were 15, 30, 45 and 60 cm, with three replicates each. The experimental design was completely randomized with four treatments and three replications. To body weight gain (BWG) and average daily gain (ADG), each animal was considered an experimental unit. To gain per area and stocking rate, the paddock was considered the experimental unit. The leaf: stem ratio showed a linear increasing behavior in the spring and summer seasons. The smaller grazing heights provided higher gain per unit area (812.15 kg ha(-1)), while the highest grazing heights promoted high individual weight gain (0.790 kg.dia(-1)). The results suggest that Xaraes grass pastures should be grazed between 30 and 45 cm to allow reasonable performances by area and individual performances.

Avaliação dos efeitos ambientais nas propriedades do compósito de poliamida 6,6/fibras de carbono

This graduation work done study of polyamide 6.6/composite carbon fibres, since its processing, characterization of the main properties. Besides the influence of temperature, UV radiation, salt spray and moisture on the mechanical and viscoelastic behavior. To achieve this goal, the first composite was processed from the heat compression molding using known variables of the process and using the empirical method to find the best value for other parameters. The method processing molding was chosen because it common in composites processing in order to evaluate the influence of crystallinity of the properties that influence the mechanical and viscoelastic behavior laminates. From the obtained laminate specimens were evaluated in weathering, such as: in hygrothermal chamber, UV, salt spray and thermal shock. In another step, the effect produced by these constraints were evaluated by optical microscopy, ultrasound, dynamic mechanical analysis and vibration tests. This project was conducted at the Department of Technology and Materials of UNESP in Guaratingueta, where all the equipment and techniques for the implementation of this project met available. After the tests proved the applicability of the composite polyamide 6.6/carbon fibers in aeronautical applications with resistance the main climatic influences