Design and development of an LED based fiber optic evanescent wave sensor for simultaneous detection of chromium and nitrite traces in water

The design and development of a cost-effective, simple, sensitive and portable LED based fiber optic evanescent wave sensor for simultaneously detecting trace amounts of chromium and nitrite in water are presented. In order to obtain the desired performance, the middle portions of two multimode plastic clad silica fibers are unclad and are used as the sensing elements in the two arms of the sensor. Each of the sensor arms is sourced by separate super bright green LEDs, which are modulated in a time-sharing manner and a single photo detector is employed for detecting these light signals. The performance and characteristics of this system clearly establish the usefulness of the technique for detecting very low concentrations of the dissolved contaminants.

The influence of serifs on 'h' and 'i': useful knowledge from design-led scientific research

The typographical naivety of much scientific legibility research has caused designers to question the value of the research and the results. Examining the reasons underlying this questioning, the paper discusses the importance of designers being more accepting of scientific findings, and why legibility investigations have value. To demonstrate how typographic knowledge can be incorporated into the design of studies to increase their validity, the paper reports on a new investigation into the role of serifs when viewed at a distance. The experiment looks into the identification of the lowercase letters ‘j’, ‘i’, ‘l’, ‘b’, ‘h’, ‘n’, ‘u’, and ‘a’ in isolation. All of the letters originate in the same typeface and are presented in one version with serifs and one version without serifs. Although the experiment found no overall legibility difference between the sans serif and the serif versions, the study showed that letters with serifs placed on the vertical extremes were more legible at a distance than the same letters in a sans serif. These findings can therefore provide specific guidance on the design of individual letters and demonstrate the product of collaboration between designer and scientist on the planning, implementation, and analysis of the study.

Light emitting diode (LED) use in artificial lighting for broiler chicken production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reduction of inappropriate medications among older nursing-home residents: a nurse-led, pre/post-design, intervention study

Background: Medication-related problems are common in the growing population of older adults and inappropriate prescribing is a preventable risk factor. Explicit criteria such as the Beers criteria provide a valid instrument for describing the rate of inappropriate medication (IM) prescriptions among older adults. Objective: To reduce IM prescriptions based on explicit Beers criteria using a nurse-led intervention in a nursing-home (NH) setting. Study Design: The pre/post-design included IM assessment at study start (pre-intervention), a 4-month intervention period, IM assessment after the intervention period (post-intervention) and a further IM assessment at 1-year follow-up. Setting: 204-bed inpatient NH in Bern, Switzerland. Participants: NH residents aged ≥60 years. Intervention: The intervention included four key intervention elements: (i) adaptation of Beers criteria to the Swiss setting; (ii) IM identification; (iii) IM discontinuation; and (iv) staff training. Main Outcome Measure: IM prescription at study start, after the 4-month intervention period and at 1-year follow-up. Results: The mean±SD resident age was 80.3±8.8 years. Residents were prescribed a mean±SD 7.8±4.0 medications. The prescription rate of IMs decreased from 14.5% pre-intervention to 2.8% post-intervention (relative risk [RR] = 0.2; 95% CI 0.06, 0.5). The risk of IM prescription increased nonstatistically significantly in the 1-year follow-up period compared with post-intervention (RR = 1.6; 95% CI 0.5, 6.1). Conclusions: This intervention to reduce IM prescriptions based on explicit Beers criteria was feasible, easy to implement in an NH setting, and resulted in a substantial decrease in IMs. These results underscore the importance of involving nursing staff in the medication prescription process in a long-term care setting.

Newer optics efficiently mix, dim, and color-tune LED light

Low-cost, plastic-injected optics mix light from different color LED dies without a significant decrease in average brightness, simplifying luminaire design both optically and electronically. In solid-state lighting, high-flux and high-color rendering index (CRI) light engines may be achieved by arraying and mixing the light from different color dies or phosphors, or a combination of the two, in the LED package. However, these nonhomogeneous sources, when combined with luminaire optics, tend to produce patterns with undesirable artifacts such as spatial and angular nonuniformities and color separation.

Implementación y análisis de luminarias LED

En este proyecto se abordan el diseño y análisis, con sus diferentes etapas, de varias configuraciones de prototipos para luminarias LED enfocadas al ámbito domestico e industrial. Se realizarán montajes sobre diferentes materiales para evaluar los resultados y decidir que soporte es más adecuado para cada circunstancia. Inicialmente expondremos el estado actual de esta tecnología y caracterizaremos, de forma preliminar, los dispositivos que vamos a utilizar para elaborar los prototipos que posteriormente analizaremos. Seguidamente detallaremos el proceso de construcción de cada prototipo, indicando especialmente las diferencias y similitudes entre ellos que, en siguientes secciones, serán analizadas. Trabajaremos con dos rangos de potencia para las luminarias. El primero de ellos se centra en obtener la máxima potencia lumínica, con valores comprendidos entre 40W y 50W, considerando un uso industrial, alumbrado público, etc. El segundo rango de potencias, se enfocará al ámbito doméstico, adecuando la temperatura de color a este entorno, para combinar la potencia, de entre 9W y 12W, con una iluminación más cálida. Finalmente someteremos los prototipos elaborados a una serie de análisis y, ante los resultados, concluiremos cuales serán aptos para el uso al que se pretenden dedicar y aquellos que deberán ser modificados. En el entorno de laboratorio, donde se llevaran a cabo análisis térmicos, eléctricos y lumínicos, emplearemos instrumental especializado para cada tipo de análisis así como su software correspondiente. A excepción de las mediciones relacionadas con el espectro de radiación lumínica, el resto serán obtenidas mediante la plataforma LabVIEW®, un completo software grafico para el desarrollo de instrumentación virtual. Como sección final, expondremos una evaluación sobre el cumplimiento de los objetivos establecidos para el proyecto, posibles mejoras o trabajos futuros y conclusiones obtenidas. ABSTRACT. This project concerns the design and analysis, with its different stages, of various configurations of LED luminaries prototypes focused on domestic and industrial environments. Mounts on different materials will be made to evaluate the results and decide which material is most appropriate for each circumstance. Initially we will expose the current state of this technology and characterize, in a preliminary way, the devices that we will use to produce the prototypes which subsequently will analyze. Later we detail the process of construction of each prototype, especially indicating the differences and similarities between them. In the following sections, we will analyze these characteristics. We will work with two power ranges for luminaries. The first one focuses on maximum light output, with values between 40W and 50W, thinking about industrial use, street lighting, etc. The second power range will focus on the domestic environment, adjusting the color temperature in this environment to combine power, between 9W and 12W, with warm lighting. Finally the prototypes will submit a series of analyzes and, with the results obtained, we conclude if will be suitable for the intended use and those that should be modified. In laboratory environment, where thermal, electrical and lighting analyzes were carried out, we will use specialized instruments for each type of analysis as well as the corresponding software. Except for measurements related to the spectrum of light radiation, the rest of information will be obtained by LabVIEW®, complete graphical development software for virtual instrumentation. As a final section, we will present an evaluation of compliance with the project objectives, possible future work, or improvements, and conclusions.

The Evolution of 'Design Build Fly' Led Teaching in Aerospace Engineering

This paper describes the evolution of a ‘Design - Build-Fly’ (DBF) approach to the delivery and assessment of a Stage Three Aircraft Design module. It focuses on the primary learning outcomes around the design and manufacturing functions associated with the development of a remotely controlled aircraft. The work covers a six year period from 2011 to present mapping the transformation of the module from report based assessment to a more hands on approach resulting in a fully functioning remotely controlled aircraft. Results show that both the staff and student experience improved across key performance metrics including student feedback, learning and competency development. Challenges still remain in methods of placing students within teams and maintaining technical rigour in reporting as students develop vocational skills and more reflective writing styles.

GiveMe Shelter: a people-centred design process for promoting independent inquiry-led learning in engineering

It has become increasingly common for tasks traditionally carried out by engineers to be undertaken by technicians and technologist with access to sophisticated computers and software that can often perform complex calculations that were previously the responsibility of engineers. Not surprisingly, this development raises serious questions about the future role of engineers and the education needed to address these changes in technology as well as emerging priorities from societal to environmental challenges. In response to these challenges, a new design module was created for undergraduate engineering students to design and build temporary shelters for a wide variety of end users from refugees, to the homeless and children. Even though the module provided guidance on principles of design thinking and methods for observing users needs through field studies, the students found it difficult to respond to needs of specific end users but instead focused more on purely technical issues.

Sharing the vision: representing the matters of concern for design-led fledgling companies in Scotland

Design is being performed on an ever-increasing spectrum of complex practices arising in response to emerging markets and technologies, co-design, digital interaction, service design and cultures of innovation. This emerging notion of design has led to an expansive array of collaborative and facilitation skills to demonstrate and share how such methods can shape innovation. The meaning of these design things in practice can't be taken for granted as matters of fact, which raises a key challenge for design to represent its role through the contradictory nature of matters of concern. This paper explores an innovative, object-oriented approach within the field of design research, visually combining an actor-network theory framework with situational analysis, to report on the role of design for fledgling companies in Scotland, established and funded through the knowledge exchange hub Design in Action (DiA). Key findings and visual maps are presented from reflective discussions with actors from a selection of the businesses within DiA's portfolio. The suggestion is that any notions of strategic value, of engendering meaningful change, of sharing the vision of design, through design things, should be grounded in the reflexive interpretations of matters of concern that emerge.

Design And Synthesis Of N-acylated Aza-goniothalamin Derivatives And Evaluation Of Their In Vitro And In Vivo Antitumor Activity.

Herein we describe the synthesis of a focused library of compounds based on the structure of goniothalamin (1) and the evaluation of the potential antitumor activity of the compounds. N-Acylation of aza-goniothalamin (2) restored the in vitro antiproliferative activity of this family of compounds. 1-(E)-But-2-enoyl-6-styryl-5,6-dihydropyridin-2(1H)-one (18) displayed enhanced antiproliferative activity. Both goniothalamin (1) and derivative 18 led to reactive oxygen species generation in PC-3 cells, which was probably a signal for caspase-dependent apoptosis. Treatment with derivative 18 promoted Annexin V/7-aminoactinomycin D double staining, which indicated apoptosis, and also led to G2 /M cell-cycle arrest. In vivo studies in Ehrlich ascitic and solid tumor models confirmed the antitumor activity of goniothalamin (1), without signs of toxicity. However, derivative 18 exhibited an unexpectedly lower in vivo antitumor activity, despite the treatments being administered at the same site of inoculation. Contrary to its in vitro profile, aza-goniothalamin (2) inhibited Ehrlich tumor growth, both on the ascitic and solid forms. Our findings highlight the importance of in vivo studies in the search for new candidates for cancer treatment.

Design of 1D and 2D molecule-based magnets with the ligand 4,5-dimethyl-1,2-phenylenebis(oxamato)

Three new bimetallic oxamato-based magnets with the proligand 4,5-dimethyl-1,2-phenylenebis-(oxamato) (dmopba) were synthesized using water or dimethylsulfoxide (DMSO) as solvents. Single crystal X-ray diffraction provided structures for two of them: [MnCu(dmopba)(H(2)O)(3)]n center dot 4nH(2)O (1) and [MnCu(dmopba)(DMSO)(3)](n center dot)nDMSO (2). The crystalline structures for both 1 and 2 consist of linearly ordered oxamato-bridged Mn(II)Cu(II) bimetallic chains. The magnetic characterization revealed a typical behaviour of ferrimagnetic chains for 1 and 2. Least-squares fits of the experimental magnetic data performed in the 300-20 K temperature range led to J(MnCu) = -27.9 cm(-1), g(Cu) = 2.09 and g(Mn) = 1.98 for 1 and J(MnCu) = -30.5 cm(-1), g(Cu) = 2.09 and g(Mn) = 2.02 for 2 (H = -J(MnCu)Sigma S(Mn, i)(S(Cu, i) + S(Cu, i-1))). The two-dimensional ferrimagnetic system [Me(4)N](2n){Co(2)[Cu(dmopba)](3)}center dot 4nDMSO center dot nH(2)O (3) was prepared by reaction of Co(II) ions and an excess of [Cu(dmopba)](2-) in DMSO. The study of the temperature dependence of the magnetic susceptibility as well as the temperature and field dependences of the magnetization revealed a cluster glass-like behaviour for 3.

Neural network model for designing automotive devices using SMD LED

The advantages offered by the electronic component LED (Light Emitting Diode) have resulted in a quick and extensive application of this device in the replacement of incandescent lights. In this combined application, however, the relationship between the design variables and the desired effect or result is very complex and renders it difficult to model using conventional techniques. This paper consists of the development of a technique using artificial neural networks that makes it possible to obtain the luminous intensity values of brake lights using SMD (Surface Mounted Device) LEDs from design data. This technique can be utilized to design any automotive device that uses groups of SMD LEDs. The results of industrial applications using SMD LED are presented to validate the proposed technique.

Bioprocess-centered molecular design (BMD) for the efficient production of an interfacially active peptide

The efficient expression and purification of an interfacially active peptide (mLac21) was achieved by using bioprocess-centered molecular design (BMD), wherein key bioprocess considerations are addressed during the initial molecular biology work. The 21 amino acid mLac21 peptide sequence is derived from the lac repressor protein and is shown to have high affinity for the oil-water interface, causing a substantial reduction in interfacial tension following adsorption. The DNA coding for the peptide sequence was cloned into a modified pET-31(b) vector to permit the expression of mLac21 as a fusion to ketosteroid isomerase (KSI). Rational iterative molecular design, taking into account the need for a scaleable bioprocess flowsheet, led to a simple and efficient bioprocess yielding mLac21 at 86% purity following ion exchange chromatography (and >98% following chromatographic polishing). This case study demonstrates that it is possible to produce acceptably pure peptide for potential commodity applications using common scaleable bioprocess unit operations. Moreover, it is shown that BMD is a powerful strategy that can be deployed to reduce bioseparation complexity. (C) 2004 Wiley Periodicals, Inc.