Utilization of Remote Traffic Monitoring Devices for Urban Freeway Work Zone Assessment Final Report, January 2012

The objective of this project was to promote and facilitate analysis and evaluation of the impacts of road construction activities in Smart Work Zone Deployment Initiative (SWZDI) states. The two primary objectives of this project were to assess urban freeway work-zone impacts through use of remote monitoring devices, such as radar-based traffic sensors, traffic cameras, and traffic signal loop detectors, and evaluate the effectiveness of using these devices for such a purpose. Two high-volume suburban freeway work zones, located on Interstate 35/80 (I-35/I-80) through the Des Moines, Iowa metropolitan area, were evaluated at the request of the Iowa Department of Transportation (DOT).

Integrated Risk Management for Improving Internal Traffic Control, Work-Zone Safety, and Mobility during Major Construction, TPF-5(081), 2012

Highway construction is among the most dangerous industries in the US. Internal traffic control design, along with how construction equipment and vehicles interact with the traveling public, have a significant effect on how safe a highway construction work zone can be. An integrated approach was taken to research work-zone safety issues and mobility, including input from many personnel, ranging from roadway designers to construction laborers and equipment operators. The research team analyzed crash data from Iowa work-zone incident reports and Occupational Safety and Health Administration data for the industry in conjunction with the results of personal interviews, a targeted work-zone ingress and egress survey, and a work-zone pilot project.

Perception and Interpretation of Advance Warning Signs on County Roads, HR-256, 1984

This research consisted of five laboratory experiments designed to address the following two objectives in an integrated analysis: (1) To discriminate between the symbol Stop Ahead warning sign and a small set of other signs (which included the word-legend Stop Ahead sign); and (2) To analyze sign detection, recognizability, and processing characteristics by drivers. A set of 16 signs was used in each of three experiments. A tachistoscope was used to display each sign image to a respondent for a brief interval in a controlled viewing experiment. The first experiment was designed to test detection of a sign in the driver's visual field; the second experiment was designed to test the driver's ability to recognize a given sign in the visual field; and the third experiment was designed to test the speed and accuracy of a driver's response to each sign as a command to perform a driving action. A fourth experiment tested the meanings drivers associated with an eight-sign subset of the 16 signs used in the first three experiments. A fifth experiment required all persons to select which (if any) signs they considered to be appropriate for use on two scale model county road intersections. The conclusions are that word-legend Stop Ahead signs are more effective driver communication devices than symbol stop-ahead signs; that it is helpful to drivers to have a word plate supplementing the symbol sign if a symbol sign is used; and that the guidance in the Manual on Uniform Traffic Control Devices on the placement of advance warning signs should not supplant engineering judgment in providing proper sign communication at an intersection.

Evaluation of Air Pollution Control Devices for Asphalt Pavement Recycling Operations, HR-188, Progress Report, 1977

This report discusses the asphalt pavement recycling project designated Project HR-188 in Kossuth County, Iowa. Specific objectives were: (a) to determine the effectiveness of drum mixing plant modifications designed to control air pollution within limits specified by the Iowa Department of Environmental Quality; (b) to assess the impact of varying the proportions of recycled and virgin aggregates, (c) to assess the impact of varying the production rate of the plant, and (d) to assess the impact of varying the mixing temperature. The discussion includes information on the proposed use of research funds, project location and description, the project planning conference, plan development, bid letting, asphalt plant configuration, actual plant operation, why this method is successful, probable process limitations, pollution results, recycled pavement test results, and the cost of virgin vs. recycled asphalt pavements.

Minimum Retroreflectivity of Traffic Signs and Pavement Markings, HR-562, 1995

This final report contains two separate reports which describe the retroreflectivity levels of various traffic signs and pavement markings on the Iowa primary road system. The data was collected in the fall/winter of 1994 and given to the Federal Highway Administration in March of 1995. This information is currently being combined with similar information from other jurisdictions across the country for the purpose of determining the impact of mandated minimum retroreflectivity levels. The FHWA will be releasing their report sometime in 1996. In October 1992, Congress mandated (Public Law 102-388) the Secretary of Transportation to revise the Manual of Uniform Traffic Control Devices to include a minimum level of retroreflectivity for pavement markings and traffic signs which shall apply to all roads open to public travel. In 1994, the FHWA initiated research studies to determine the retroreflectivity levels which currently exist for signs and markings in an attempt to develop standards which are reasonable to implement. The Iowa Department of Transportation participated in both of the studies and the final reports are included. After compilation and analysis of the collected retroreflectivity data, the FHWA will propose the new MUTCD standards through the federal rule making process. It is estimated that the actual MUTCD change will occur sometime in late 1997 or early 1998.

Traffic Signal Inventory Project, 2001

The Center for Transportation Research and Education performed a traffic signal inventory study for the Iowa Department of Transportation. The purpose of this study was to determine the level of compliance with the Manual on Uniform Traffic Control Devices (MUTCD) and other industry standards of traffic signals on the state highway system. Signals were randomly selected throughout the State of Iowa. Only signals in cities with a population less than 5,000 were considered. Several intersections need to be addressed immediately to correct clearance timing settings. Red clearance intervals were frequently too short. A handful of intersections had inadequate pedestrian clearance times. Six intersections had at least one yellow clearance interval that did not meet Institute of Transportation Engineers standards. Some of the intersections likely would not meet traffic signal warrants and should be investigated for possible removal. The most common problem found with traffic signals was a lack of maintenance. Many of the signals had at least one of the following problems: burned out lights (signals and/or pedestrian heads), pedestrian lenses in need of replacement, dirty cabinet/missing or poor filter, missing visors, or inoperative pedestrian push buttons. Timing sheets were frequently missing or out of date. Another frequent noncompliance issue was the use of backplates. The MUTCD states that backplates should be used on signals viewed against a bright sky. The majority of signals inventoried did not have backplates on the mast-arm mounted signals. The timing at some intersections could likely be improved by reducing the cycle length. Where there were multiple signals in close proximity rarely was there any attempt at signal coordination. Finally, a number of intersections had equipment that by today’s standards would be considered obsolete.

Traffic Control in Work Zones with Edge Drop-Offs, 2002

Pavement and shoulder edge drop-offs commonly occur in work zones as the result of overlays, pavement replacement, or shoulder construction. The depth of these elevation differentials can vary from approximately one inch when a flexible pavement overlay is applied to several feet where major reconstruction is undertaken. The potential hazards associated with pavement edge differentials depend on several factors including depth of the drop-off, shape of the pavement edge, distance from traveled way, vehicle speed, traffic mix, volume, and other factors. This research was undertaken to review current practices in other states for temporary traffic control strategies addressing lane edge differentials and to analyze crash data and resultant litigation related to edge drop-offs. An objective was to identify cost-effective practices that would minimize the potential for and impacts of edge drop crashes in work zones. Considerable variation in addressing temporary traffic control in work zones with edge drop-off exposure was found among the states surveyed. Crashes related to pavement edge drop-offs in work zones do not commonly occur in the state of Iowa, but some have resulted in significant tort claims and settlements. The use of benefit/cost analysis may provide guidance in selection of an appropriate mitigation and protection of edge drop-off conditions. Development and adoption of guidelines for design of appropriate traffic control for work zones that include edge drop-off exposure, particularly identifying effective use of temporary barrier rail, may be beneficial in Iowa.

Maintenance of Traffic for Innovative Geometric Design Work Zones, 2015

Currently there are no guidelines within the Manual on Uniform Traffic Control Devices (MUTCD) on construction phasing and maintenance of traffic (MOT) for retrofit construction and maintenance projects involving innovative geometric designs. The research presented in this report addressed this gap in existing knowledge by investigating the state of the practice of construction phasing and MOT for several types of innovative geometric designs including the roundabout, single point urban interchange (SPUI), diverging diamond interchange (DDI), restricted-crossing left turn (RCUT), median U-turn (MUT), and displaced left turn (DLT). This report provides guidelines for transportation practitioners in developing construction phasing and MOT plans for innovative geometric designs. This report includes MOT Phasing Diagrams to assist in the development of MOT strategies for innovative designs. The MOT Phasing Diagrams were developed through a review of literature, survey, interviews with practitioners, and review of plans from innovative geometric design projects. These diagrams are provided as a tool to assist in improving work zone safety and mobility through construction of projects with innovative geometric designs. The aforementioned synthesis of existing knowledge documented existing practices for these types of designs.

Lésions induites par les pistolets à impulsion électrique de type Taser [Health Risks Concerning Electronic Control Devices]

Les pistolets à impulsion électrique (PIE) sont de plus en plus fréquemment utilisés en Europe ces dernières années, le modèle le plus connu étant le Taser®. Les connaissances scientifiques concernant les PIE et leurs effets potentiels restent toutefois limitées. Nous avons conduit une revue de littérature afin d'évaluer les implications potentielles de leur utilisation en termes de sécurité, de morbidité et de mortalité. Une exposition unique chez un individu sain peut généralement être considérée comme peu dangereuse. Les sujets à risque de complications sont les individus exposés à de multiples décharges, les personnes sous l'influence de substances psychoactives, ceux qui montrent des signes d'agitation extrême, ou encore les individus présentant des comorbidités médicales. L'éventail des complications pouvant survenir lors de leur exposition est large et inclut les lésions provoquées par les impacts des électrodes, les traumatismes liés à la chute induite par la paralysie transitoire ou des complications cardiovasculaires. Dans ce contexte, les personnes exposées doivent être examinées attentivement, et les éventuelles lésions traumatiques doivent être exclues. The use of electronic control devices (ECD), such as the Taser®, has increased in Europe over the past decade. However, scientific data concerning the potential health impact of ECD usage remains limited. We reviewed the scientific literature in order to evaluate the safety, mortality, and morbidity associated with ECD use. Exposure of a healthy individual to a single ECD electroshock can be considered generally safe. Complications can, however, occur if the patient is subject to multiple electroshocks, if the patient has significant medical comorbidities, or when exposure is associated with drug abuse or agitated delirium. The broad spectrum of potential complications associated with ECD exposure includes direct trauma caused by the ECD electrodes, injuries caused by the transient paralysis-induced fall, and cardiovascular events. An ECD-exposed patient requires careful examination during which traumatic injuries are actively sought out.

Management of Traffic Control — A Computer Oriented Approach

Traffic Management system (TMS) comprises four major sub systems: The Network Database Management system for information to the passengers, Transit Facility Management System for service, planning, and scheduling vehicle and crews, Congestion Management System for traffic forecasting and planning, Safety Management System concerned with safety aspects of passengers and Environment. This work has opened a rather wide frame work of model structures for application on traffic. The facets of these theories are so wide that it seems impossible to present all necessary models in this work. However it could be deduced from the study that the best Traffic Management System is that whichis realistic in all aspects is easy to understand is easy to apply As it is practically difficult to device an ideal fool—proof model, the attempt here has been to make some progress-in that direction.

Cognitive process modelling of controllers in en route air traffic control

In recent years, various efforts have been made in air traffic control (ATC) to maintain traffic safety and efficiency in the face of increasing air traffic demands. ATC is a complex process that depends to a large degree on human capabilities, and so understanding how controllers carry out their tasks is an important issue in the design and development of ATC systems. In particular, the human factor is considered to be a serious problem in ATC safety and has been identified as a causal factor in both major and minor incidents. There is, therefore, a need to analyse the mechanisms by which errors occur due to complex factors and to develop systems that can deal with these errors. From the cognitive process perspective, it is essential that system developers have an understanding of the more complex working processes that involve the cooperative work of multiple controllers. Distributed cognition is a methodological framework for analysing cognitive processes that span multiple actors mediated by technology. In this research, we attempt to analyse and model interactions that take place in en route ATC systems based on distributed cognition. We examine the functional problems in an ATC system from a human factors perspective, and conclude by identifying certain measures by which to address these problems. This research focuses on the analysis of air traffic controllers' tasks for en route ATC and modelling controllers' cognitive processes.

Urban Traffic Control and Monitoring - An Approach for the Brazilian Intelligent Cities Project

This paper describes an urban traffic control system which aims at contributing to a more efficient traffic management system in the cities of Brazil. It uses fuzzy sets, case-based reasoning, and genetic algorithms to handle dynamic and unpredictable traffic scenarios, as well as uncertain, incomplete, and inconsistent information. The system is composed by one supervisor and several controller agents, which cooperate with each other to improve the system's results through Artificial Intelligence Techniques.

Effects of traffic control on the soil physical quality and the cultivation of sugarcane

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A speech interface for air traffic control terminals

Several issues concerning the current use of speech interfaces are discussed and the design and development of a speech interface that enables air traffic controllers to command and control their terminals by voice is presented. A special emphasis is made in the comparison between laboratory experiments and field experiments in which a set of ergonomics-related effects are detected that cannot be observed in the controlled laboratory experiments. The paper presents both objective and subjective performance obtained in field evaluation of the system with student controllers at an air traffic control (ATC) training facility. The system exhibits high word recognition test rates (0.4% error in Spanish and 1.5% in English) and low command error (6% error in Spanish and 10.6% error in English in the field tests). Subjective impression has also been positive, encouraging future development and integration phases in the Spanish ATC terminals designed by Aeropuertos Españoles y Navegación Aérea (AENA).

Metodología de evaluación de la seguridad vial en intersecciones basada en el análisis cuantitativo de conflictos entre vehículos

El modo tradicional de estimar el nivel de seguridad vial es el registro de accidentes de tráfico, sin embargo son altamente variables, aleatorios y necesitan un periodo de registro de al menos 3 años. Existen metodologías preventivas en las cuales no es necesario que ocurra un accidente para determinar el nivel de seguridad de una intersección, como lo es la técnica de los conflictos de tráfico, que introduce las mediciones alternativas de seguridad como cuantificadoras del riesgo de accidente. El objetivo general de la tesis es establecer una metodología que permita clasificar el riesgo en intersecciones interurbanas, en función del análisis de conflictos entre vehículos, realizado mediante las variables alternativas o indirectas de seguridad vial. La metodología para el análisis y evaluación temprana de la seguridad en una intersección, estará basada en dos medidas alternativas de seguridad: el tiempo hasta la colisión y el tiempo posterior a la invasión de la trayectoria. El desarrollo experimental se realizó mediante estudios de campo, para la parte exploratoria de la investigación, se seleccionaron 3 intersecciones interurbanas en forma de T donde se obtuvieron las variables que caracterizan los conflictos entre vehículos; luego mediante técnicas de análisis multivariante, se obtuvo los modelos de clasificación del riesgo cualitativo y cuantitativo. Para la homologación y el estudio final de concordancia entre el índice propuesto y el modelo de clasificación, se desarrollaron nuevos estudios de campo en 6 intersecciones interurbanas en forma de T. El índice de riesgo obtenido resulta una herramienta muy útil para realizar evaluaciones rápidas conducentes a estimar la peligrosidad de una intersección en T, debido a lo simple y económico que resulta obtener los registros de datos en campo, por medio de una rápida capacitación a operarios; la elaboración del informe de resultados debe ser por un especialista. Los índices de riesgo obtenidos muestran que las variables originales más influyentes son las mediciones de tiempo. Se pudo determinar que los valores más altos del índice de riesgo están relacionados a un mayor riesgo de que un conflicto termine en accidente. Dentro de este índice, la única variable cuyo aporte es proporcionalmente directo es la velocidad de aproximación, lo que concuerda con lo que sucede en un conflicto, pues una velocidad excesiva se manifiesta como un claro factor de riesgo ya que potencia todos los fallos humanos en la conducción. Una de las principales aportaciones de esta tesis doctoral a la ingeniería de carreteras, es la posibilidad de aplicación de la metodología por parte de administraciones de carreteras locales, las cuales muchas veces cuentan con recursos de inversión limitados para efectuar estudios preventivos, sobretodo en países en vías de desarrollo. La evaluación del riesgo de una intersección luego de una mejora en cuanto a infraestructura y/o dispositivos de control de tráfico, al igual que un análisis antes – después, pero sin realizar una comparación mediante la ocurrencia de accidentes, sino que por medio de la técnica de conflictos de tráfico, se puede convertir en una aplicación directa y económica. Además, se pudo comprobar que el análisis de componentes principales utilizado en la creación del índice de riesgo de la intersección, es una herramienta útil para resumir todo el conjunto de mediciones que son posibles de obtener con la técnica de conflictos de tráfico y que permiten el diagnóstico del riesgo de accidentalidad en una intersección. En cuanto a la metodología para la homologación de los modelos, se pudo establecer la validez y confiabilidad al conjunto de respuestas entregadas por los observadores en el registro de datos en campo, ya que los resultados de la validación establecen que la medición de concordancia de las respuestas entregadas por los modelos y lo observado, son significativas y sugieren una alta coincidencia entre ellos. ABSTRACT The traditional way of estimating road safety level is the record of occurrence of traffic accidents; however, they are highly variable, random, and require a recording period of at least three years. There are preventive methods which do not need an accident to determine the road safety level of an intersection, such as traffic conflict technique, which introduces surrogate safety measures as parameters for the evaluation of accident risks. The general objective of the thesis is to establish a methodology that will allow the classification of risk at interurban intersections as a function of the analysis of conflicts between vehicles performed by means of surrogate road safety variables. The proposal of a methodology for the analysis and early evaluation of safety at an intersection will be based on two surrogate safety measures: the time to collision and the post encroachment time. On the other hand, the experimental development has taken place by means of field studies in which the exploratory part of the investigation selected three interurban T-intersections where the application of the traffic conflict technique gave variables that characterize the conflicts between vehicles; then, using multivariate analysis techniques, the models for the classification of qualitative and quantitative risk were obtained. With the models new field studies were carried out at six interurban Tintersections with the purpose of developing the homologation and the final study of the agreement between the proposed index and the classification model. The risk index obtained is a very useful tool for making rapid evaluations to estimate the hazard of a T-intersection, as well as for getting simply and economically the field data records after a fast training of the workers and then preparing the report of results by a specialist. The risk indices obtained show that the most influential original variables are the measurements of time. It was determined that the highest risk index values are related with greater risk of a conflict resulting in an accident. Within this index, the only variable whose contribution is proportionally direct is the approach speed, in agreement with what happens in a conflict, because excessive speed appears as a clear risk factor at an intersection because it intensifies all the human driving faults. One of the main contributions of this doctoral thesis to road engineering is the possibility of applying the methodology by local road administrations, which very often have limited investment resources to carry out these kinds of preventive studies, particularly in developing countries. The evaluation of the risk at an intersection after an improvement in terms of infrastructure and/or traffic control devices, the same as a before/after analysis, without comparison of accident occurrence but by means of the traffic conflict technique, can become a direct and economical application. It is also shown that main components analysis used for producing the risk index of the intersection is a useful tool for summarizing the whole set of measurements that can be obtained with the traffic conflict technique and allow diagnosing accident risk at an intersection. As to the methodology for the homologation of the models, the validity and reliability of the set of responses delivered by the observers recording the field data could be established, because the results of the validation show that agreement between the observations and the responses delivered by the models is significant and highly coincident.