Inspection of drop-weight impact damage in woven CFRP laminates fabricated by different processes

The influence of manufacturing process on the drop-weight impact damage in woven carbon/epoxy laminates was inspected by visual observation, dyepenetrant X-ray technique, and optical microscopy observation. The MTM56/ CF0300 woven quasi-isotropic laminates were fabricated by two processes: the autoclave and the Quickstep processes. Quickstep^TM is a novel composite manufacturing process, which was designed for the out-of-autoclave production of high-quality composite parts at lower cost. It utilizes higher heat conduction of fluid other than gas to transfer heat to components, which results in much shorter cure cycles. The laminates cured by this fast heating process showed different impact failure modes from those cured by the conventional autoclave process. The residual indentation in the top side of the Quickstep-cured laminates had a bigger diameter, but a smaller depth at the same impact energy level. Dye-penetrant X-ray revealed more intense and connected impact damage regions in the autoclave-cured laminates. Optical micrography as a supplementary method showed less severe matrix damage in the quickstep-cured laminates indicating a more ductile property of the resin matrix cured at a faster heating rate.

Student preferences for bachelor degrees at TAFE: the socio-spatial influence of schools

This report on Student Preferences for Bachelor Degrees at TAFE (Technical and Further Education) institutions is derived from research commissioned by Australia’s National Centre for Student Equity in Higher Education (NCSEHE) hosted at Curtin University and conducted by researchers at Deakin University’s Strategic Centre for Research in Educational Futures and Innovation (CREFI). The report focuses on the influence of schools on their students’ higher education (HE) preferences – particularly their preferences for TAFE bachelor degrees – as recorded by the Victorian and South Australian Tertiary Admissions Centres (VTAC and SATAC). Influence is researched in terms of a school’s socioeconomic status, geographical location and sector. The SATAC data set is considerably smaller, at around 8 per cent of the VTAC data set.Bachelor degrees offered by TAFEs are relatively small in number but a growing higher education option for students in Australia (Gale et al. 2013). The Australian Government’s proposal to extend Commonwealth Supported Places (CSPs) to include Australian higher education not delivered by the nation’s public universities (Department of Education 2014b), is likely to fuel further growth in TAFE bachelor degree offerings. The recent Report of the Review of the Demand Driven Funding System in Australian higher education (Kemp & Norton 2014), which recommended this change, also makes special mention of non-university degree options as something that would be of particular benefit to students from low socioeconomic status backgrounds.The research reported herein is informed by a review of the international research literature, which indicates three main influences on students’ HE preferences: (1) students’ families and communities; (2) the socio-spatial location of their schools; and (3) school practices. This report contributes to understandings on the second of these: the influence of school context (their socio-spatial location) on students’ preferences for TAFE bachelor degrees.The research found that the annual rate of student preferences for TAFE bachelor degrees was relatively stable (at around 1,500 per annum) from 2009 to 2012 but rose significantly (by 30%) in 2013. Students from high socioeconomic status schools (and with an average ATAR of 56.9) were the group that registered the largest number of preferences. The number of preferences for TAFE bachelor degrees lodged by students from metropolitan schools exceeded the preferences of students from schools located in all other regions combined. This might reflect the fact that TAFE institutions offering bachelor degrees tend to be located in metropolitan areas.The research also found that students’ preferences for TAFE bachelor degrees increased after announcement of their Australian Tertiary Admission Rank (ATAR), by between 25 and 30 per cent each year. The post-ATAR increase was most noticeable in the Health and Education fields of study and among students from high socioeconomic status schools. The report concludes that while the public perception of TAFE is that it is a sector primarily for students from low SES backgrounds, this is not reflected in students’ preferences for TAFE bachelor degrees. Instead, the preferences of students from high socioeconomic schools outnumber other SES groups in almost every TAFE-degree field of study. This includes the fields of Health and Education, which are often seen to be typical low SES student choices in universities (Gale & Parker 2013).

Greenhouse affect : the relationship between the sustainable design of schools and children’s environmental attitudes

This study aims to determine if primary school children’s environmental attitudes can be predicted by whether their school had been designed or adapted for sustainability. A New Ecological Paradigm (NEP) scale for children was adopted to measure attitudes, with supplementary questions added to align this scale to the Australian context of the study. In addition, the original adult NEP scale was used to determine relationships between children’s environmental attitudes, their School Design and their Parents’ and Teachers’ Environmental Attitudes. Data collected from grade 4, 5 and 6 primary school children, their parents and teachers were analysed via three multiple regressions. The results indicate that sustainable design in schools improves the environmental attitudes of children towards perceptibly green building features, such as solar panels, the use of recycled water, natural daylighting and outdoor classrooms including food-producing gardens.

Periodic inspection of sprayers: diagnostic to the northern of Paraná

Para a otimização no uso de agroquímicos, vários países têm realizado inspeções periódicas em pulverizadores agrícolas. No Brasil, o conhecimento do estado destas máquinas pode nortear pesquisas e investimentos em orientação de uso e de manutenção das mesmas. O objetivo deste trabalho foi verificar o estado de manutenção de pulverizadores em uso para a região norte do Estado do Paraná. Foram avaliados itens como: presença, estado e escala do manômetro, estado das mangueiras, estado dos antigotejadores, presença de vazamentos, estado da barra, estado dos filtros, estado das pontas de pulverização e erros na taxa de aplicação. As máquinas foram caracterizadas como aprovadas quando não havia falha em nenhum item avaliado. O fator que ocasionou o maior índice de reprova entre as máquinas foi a escala incorreta do manômetro, que reprovou 84,55% das máquinas avaliadas. Outro fator de destaque foi a taxa de aplicação incorreta em 75,5% das máquinas. do total dos 110 pulverizadores avaliados,apenas uma unidade foi aprovada.

A Non-Destructive Testing Based on Electromagnetic Measurements and Neural Networks for the Inspection of Concrete Structures

This paper presents a new non-destructive testing (NDT) for reinforced concrete structures, in order to identify the components of their reinforcement. A time varying electromagnetic field is generated close to the structure by electromagnetic devices specially designed for this purpose. The presence of ferromagnetic materials (the steel bars of the reinforcement) immersed in the concrete disturbs the magnetic field at the surface of the structure. These field alterations are detected by sensors coils placed on the concrete surface. Variations in position and cross section (the size) of steel bars immersed in concrete originate slightly different values for the induced voltages at the coils.. The values for the induced voltages were obtained in laboratory tests, and multi-layer perceptron artificial neural networks with Levemberg-Marquardt training algorithm were used to identify the location and size of the bar. Preliminary results can be considered very good.

Digital radiography for the inspection of weld seams of pipelines - better sensitivity

Conventional radiography, using industrial radiographic films, has its days numbered. Digital radiography, recently, has taken its place in various segments of products and services, such as medicine, aerospace, security, automotive, etc. As well as the technological trend, the digital technique has brought proven benefits in terms of productivity, sensitivity, the environment, tools for image treatment, cost reductions, etc. If the weld to be inspected is on a serried product, such as, for example, a pipe, the best option for the use of digital radiography is the plane detector, since its use can reduce the length of the inspection cycle due to its high degree of automation. This work tested welded joints produced with the submerged arc process, which were specially prepared in such a way that it shows small artificial cracks, which served as the basis forcomparing the sensitivity levels of the techniques involved. After carrying out the various experiments, the digital meth odshowed the highest sensitivity for the image quality indicator (IQI) of the wire and also in terms of detecting small discontinuities, indicating that the use of digital radiography using the plane detector had advantages over the conventional technique (Moreira et al. Digital radiography, the use of plane detectors for the inspection of welds in oil pipes and gas pipes.9th COTEQ and XXV National Testing Congress for Non Destructive Testing and Inspection; Salvador, Bahia, Brazil and Bavendiek et al. New digital radiography procedure exceeds film sensitivity considerably in aerospace applications. ECNDT; 2006; Berlin). The works were carried out on the basis of the specifications for oil and gas pipelines, API 5L 2004 edition (American Petroleum Institute. API 5L: specification for line pipe. 4th ed. p. 155; 2004) and ISO 3183 2007 edition (International Organization for Standardization, ISO 3183. Petroleum and gas industries - steel pipes for pi pelines transportation systems. p. 143; 2007). © 2010 Taylor & Francis.

Introduction: A brief journey through the 80 year history of the International Association of Schools of Social Work

The leaders of the International Association of Schools of Social Work (IASSW) have played major roles in shaping the organization over its 80 year history. This brief introduction will put their roles in the context of the organization’s history. While influenced by its presidents in significant ways, the organization’s trajectory has also been affected by the political, economic and social developments of the 20th century and the beginning of the 21st. Significant changes have occurred in the organization and in social work education, yet, as Feustel (2006) observed, “the history of the IASSW demonstrates lines of continuity that are even more remarkable for the fact that it was caught up in the great historical ruptures of the 20th century” (p. 3).

The leveler of the path : hebrew reader and translator for the use of schools

by S. Mannheimer

The effects of ethnicity and ethnic composition of schools on physical activity and nutrition behaviors of 8th and 11th graders in Texas

With rates of obesity and overweight continuing to increase in the US, the attention of public health researchers has focused on nutrition and physical activity behaviors. However, attempts to explain the disparate rates of obesity and overweight between whites and Hispanics have often proven inadequate. Indeed, the nebulous term ‘ethnicity’ provides little important detail in addressing potential biological, behavioral, and environmental factors that may affect rates of obesity and overweight. In response to this, the present research seeks to test the explanatory powers of ethnicity by situating the nutrition and physical activity behaviors of whites and Hispanic into their broader social contexts. It is hypothesized that a student's gender and grade level, as well as the socioeconomic status and ethnic composition of their school, will have more predictive power for these behaviors than will self-reported ethnicity. ^ Analyses revealed that while ethnicity did not seem to impact nutrition behaviors among the wealthier schools and those with fewer Hispanics, ethnicity was relevant in explaining these behaviors in the poorest tertile of schools and those with the highest number of Hispanics. With respect to physical activity behaviors, the results were mixed. The variables representing regular physical activity, participation in extracurricular physical activities, and performance of strengthening and toning exercises were more likely to be determined by SES and ethnic composition than ethnicity, especially among 8th grade males. However, school sports team and physical education participation continued to vary by ethnicity, even after controlling for SES and ethnic composition of schools. In conclusion then, it is important to understand the intersecting demographic and social variables that define and surround the individual in order to understand nutrition and physical activity behaviors and thus overweight and obesity.^

Non contact inspection of the fatigue damage state of carbon fiber reinforced polymer by optical surface roughness measurements

This work presents the evaluation of a new non-contact technique to assess the fatigue damage state of CFRP structures by measuring surface roughness parameters. Surface roughness and stiffness degradation have been measured in CFRP coupons cycled with constant amplitude loads, and a Pearson?s correlation of 0.79 was obtained between both variables. Results suggest that changes on the surface roughness measured in strategic zones of components made of the evaluated CFRP, could be indicative of the level of damage due to fatigue loads. This methodology could be useful for other FRP due to similarities in the fatigue damage process.